YUMO GLOBE — Brass Wire Sculpture Cyber Desk Clock featuring an ESP32-C3 and 7-Segment Display. Hand-Bent Brass Wire Sculpture, NTP Time Sync, SK6812 LEDs & Startup Animation
Fourth build from YUMO BUILDS.
This one started as a pile of 1.5mm brass rods and a wooden base — no 3D printing, no CNC, no moulds. Every angle is hand-bent.
Inside: an ESP32-C3 Super Mini drives a 4-digit 7-segment display (LTD-4608E) via hardware-multiplexed ISR at 333Hz, keeping the display rock-solid while everything else runs in the background. Five SK6812 addressable LEDs live inside the sculpture — four ring the base, one sits at the top — and they each do their own thing.
Full source code on GitHub — build your own!
──────────────────────── 🔧 PARTS USED
-ESP32-C3 Super Mini https://www.amazon.co.uk/dp/B0DDL7WNZX
-2-Digit 7-Segment Display https://www.amazon.co.uk/s?k=2-Digit+7-Segment+Display
-SK6812 Addressable LEDs https://thepihut.com/products/neopixel-rgb-5050-led-with-integrated-driver-chip-100-pack
-Brass Rods 1.5mm × 300mm https://www.amazon.co.uk/s?k=brass+rods+1.5mm
-DC 3.7V 18650 Li-ion Battery https://www.amazon.co.uk/s?k=18650+3.7v+rechargeable+battery
-18650 Li-ion Battery charger module https://www.amazon.co.uk/dp/B0DXC1JSB5
-Dome glass stand https://www.amazon.co.uk/dp/B0DWX567HV
────────────────────────
🚀 FEATURES
🕐 NTP Time Sync — Auto Timezone Connects via WiFiManager captive portal — no hardcoded passwords. Timezone auto-detected via IP geolocation. Syncs every hour with pool.ntp.org and time.google.com.
⚡ Hardware-Multiplexed Display ISR-driven 4-digit mux at 333Hz. Zero flicker. Heavy WiFi + LED tasks run in parallel without touching the display.
🌈 SK6812 LED Animations — 5 Stages Startup: all 5 LEDs sync with the display animation — warm spinner (red → orange → gold), cool fill (teal → cyan → blue), countdown rainbow, neon burst, and a white strobe finale. After sync: the top LED solos — breathing through neon yellow, purple, blue, red, and white. Every 30 seconds: the top LED triple-flashes. Every 5 minutes: base and top LEDs alternate slow breathing in contrasting blue/gold/purple/white pairs. Every hour: full neon show across all 5 LEDs.
🫲Hand-Bent Brass Wire Sculpture The frame is entirely hand-bent from 1.5mm brass rod — no 3D printing, no laser cutting, no moulds. The wooden base is turned by hand.
📶 WiFiManager Portal No hardcoded credentials. Captive portal on first boot — saved forever after that.
────────────────────────
📦 LIBRARIES USED FastLED · WiFiManager · ArduinoJson · PlatformIO
────────────────────────
More YUMO BUILDS projects coming soon. 💬 Drop a comment — what should I add next?
#ESP32 #ESP32C3 #YumoBuilds #YumoClock #FastLED #SK6812 #NeoPixel #NTPClock #DIYClock #SmartClock #BrassWire #WireSculpture #WireArt #HandmadeTech #Maker #OpenSource #ArduinoProject #ElectronicsProject #DIYGadget #HomeMade
────────────────────────
This project's code is licensed under the PolyForm Noncommercial 1.0.0 license — free for personal, non-commercial use.
The physical design (hand-bent brass wire sculpture and wooden base) is licensed under CC BY-NC-SA 4.0.
Non-commercial use only. Commercial use, manufacturing, or selling this design or derivatives of it requires explicit permission from the author.