Fable 1.1 Support - Round 2

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.gitignore

@@ -1,15 +1,196 @@
-npm-debug.log
-.ionide.debug
-.paket/paket.exe
+public/bundle.js*
+
+# Node
 node_modules/
-paket-files/
-packages/
-.fake/
-dist/
 
-obj
-bin
-.vs
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+
+# User-specific files
 *.suo
+*.user
+*.sln.docstates
+
+# Xamarin Studio / monodevelop user-specific
+*.userprefs
+*.dll.mdb
+*.exe.mdb
+
+# Build results
+
+[Dd]ebug/
+[Rr]elease/
+x64/
+[Bb]in/
+[Oo]bj/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+*_i.c
+*_p.c
+*.ilk
+*.meta
+*.obj
+*.pch
+*.pdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.log
+*.scc
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opensdf
+*.sdf
+*.cachefile
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+
+# Other Visual Studio data
+.vs/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# NCrunch
+*.ncrunch*
+.*crunch*.local.xml
+
+# Installshield output folder
+#[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.Publish.xml
+
+# Enable nuget.exe in the .nuget folder (though normally executables are not tracked)
+!.nuget/NuGet.exe
+
+# Windows Azure Build Output
+csx
+*.build.csdef
+
+# Windows Store app package directory
+AppPackages/
+
+# Others
+sql/
+*.Cache
+ClientBin/
+[Ss]tyle[Cc]op.*
+~$*
+*~
+*.dbmdl
+*.[Pp]ublish.xml
+*.pfx
+*.publishsettings
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file to a newer
+# Visual Studio version. Backup files are not needed, because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+
+# SQL Server files
+App_Data/*.mdf
+App_Data/*.ldf
+
+
+#LightSwitch generated files
+GeneratedArtifacts/
+_Pvt_Extensions/
+ModelManifest.xml
+
+# =========================
+# Windows detritus
+# =========================
+
+# Windows image file caches
+Thumbs.db
+ehthumbs.db
+
+# Folder config file
+Desktop.ini
+
+# Recycle Bin used on file shares
+$RECYCLE.BIN/
+
+# Mac desktop service store files
+.DS_Store
+
+# ===================================================
+# Exclude F# project specific directories and files
+# ===================================================
+
+# NuGet Packages Directory
+packages/
+
+# Generated documentation folder
+docs/output/
+
+# Temp folder used for publishing docs
+temp*/
+
+# Test results produced by build
+TestResults.xml
+TestResult.xml
+
+# Nuget outputs
+nuget/*.nupkg
+release.cmd
+release.sh
+localpackages/
+paket-files
+*.orig
+docs/content/license.md
+docs/content/release-notes.md
+.fake
+docs/tools/FSharp.Formatting.svclog
+.ionide.debug
 *.bak
-debug.log
+project.lock.json

.paket/Paket.Restore.targets

@@ -0,0 +1,108 @@
+<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <!-- Mark that this target file has been loaded.  -->
+    <IsPaketRestoreTargetsFileLoaded>true</IsPaketRestoreTargetsFileLoaded>
+    <PaketToolsPath>$(MSBuildThisFileDirectory)</PaketToolsPath>
+    <MonoPath Condition="'$(MonoPath)' == '' And Exists('/Library/Frameworks/Mono.framework/Commands/mono')">/Library/Frameworks/Mono.framework/Commands/mono</MonoPath>
+    <MonoPath Condition="'$(MonoPath)' == ''">mono</MonoPath>
+    <!-- Paket command -->
+    <PaketExePath Condition=" '$(PaketExePath)' == '' AND Exists('$(PaketRootPath)paket.exe')">$(PaketRootPath)paket.exe</PaketExePath>
+    <PaketExePath Condition=" '$(PaketExePath)' == '' ">$(PaketToolsPath)paket.exe</PaketExePath>
+    <PaketCommand Condition=" '$(OS)' == 'Windows_NT'">"$(PaketExePath)"</PaketCommand>
+    <PaketCommand Condition=" '$(OS)' != 'Windows_NT' ">$(MonoPath) --runtime=v4.0.30319 "$(PaketExePath)"</PaketCommand>
+  </PropertyGroup>
+
+  <Target Name="PaketRestore" BeforeTargets="_GenerateProjectRestoreGraphPerFramework;_GenerateRestoreGraphWalkPerFramework;CollectPackageReferences" >
+
+    <Exec Command='$(PaketCommand) restore --project "$(MSBuildProjectFullPath)" --target-framework $(TargetFramework)' ContinueOnError="false" />
+
+    <PropertyGroup>
+      <PaketReferencesFilePath>$(MSBuildProjectDirectory)/obj/$(MSBuildProjectFile).references</PaketReferencesFilePath>
+    </PropertyGroup>
+
+    <ReadLinesFromFile File="$(PaketReferencesFilePath)" >
+      <Output TaskParameter="Lines" ItemName="PaketReferencesFileLines"/>
+    </ReadLinesFromFile>
+
+    <ItemGroup Condition=" '@(PaketReferencesFileLines)' != '' " >
+      <PaketReferencesFileLinesInfo Include="@(PaketReferencesFileLines)" >
+        <PackageName>$([System.String]::Copy('%(PaketReferencesFileLines.Identity)').Split(',')[0])</PackageName>
+        <PackageVersion>$([System.String]::Copy('%(PaketReferencesFileLines.Identity)').Split(',')[1])</PackageVersion>
+      </PaketReferencesFileLinesInfo>
+      <PackageReference Include="%(PaketReferencesFileLinesInfo.PackageName)">
+        <Version>%(PaketReferencesFileLinesInfo.PackageVersion)</Version>
+      </PackageReference>
+    </ItemGroup>
+
+    <PropertyGroup>
+      <RestoreConfigFile>$(MSBuildProjectDirectory)/obj/$(MSBuildProjectFile).NuGet.Config</RestoreConfigFile>
+    </PropertyGroup>
+
+  </Target>
+
+  <Target Name="PaketDisableDirectPack" AfterTargets="_IntermediatePack" BeforeTargets="GenerateNuspec" >
+    <PropertyGroup>
+      <ContinuePackingAfterGeneratingNuspec>false</ContinuePackingAfterGeneratingNuspec>
+    </PropertyGroup>
+  </Target>
+
+  <Target Name="PaketOverrideNuspec" AfterTargets="GenerateNuspec" >
+    <PropertyGroup>
+      <PaketReferencesFilePath>$(MSBuildProjectDirectory)/obj/$(MSBuildProjectFile).references</PaketReferencesFilePath>
+      <ContinuePackingAfterGeneratingNuspec>true</ContinuePackingAfterGeneratingNuspec>
+    </PropertyGroup>
+
+    <ItemGroup>
+      <_NuspecFiles Include="$(BaseIntermediateOutputPath)*.nuspec"/>
+    </ItemGroup>
+
+    <Exec Command='$(PaketCommand) fix-nuspec file "@(_NuspecFiles)" references-file "$(PaketReferencesFilePath)" ' />
+
+    <ConvertToAbsolutePath Condition="@(_NuspecFiles) != ''" Paths="@(_NuspecFiles)">
+      <Output TaskParameter="AbsolutePaths" PropertyName="NuspecFileAbsolutePath" />
+    </ConvertToAbsolutePath>
+
+    <!-- Call Pack -->
+    <PackTask PackItem="$(PackProjectInputFile)"
+              PackageFiles="@(_PackageFiles)"
+              PackageFilesToExclude="@(_PackageFilesToExclude)"
+              PackageVersion="$(PackageVersion)"
+              PackageId="$(PackageId)"
+              Title="$(Title)"
+              Authors="$(Authors)"
+              Description="$(Description)"
+              Copyright="$(Copyright)"
+              RequireLicenseAcceptance="$(PackageRequireLicenseAcceptance)"
+              LicenseUrl="$(PackageLicenseUrl)"
+              ProjectUrl="$(PackageProjectUrl)"
+              IconUrl="$(PackageIconUrl)"
+              ReleaseNotes="$(PackageReleaseNotes)"
+              Tags="$(PackageTags)"
+              TargetPathsToAssemblies="@(_TargetPathsToAssemblies->'%(FinalOutputPath)')"
+              TargetPathsToSymbols="@(_TargetPathsToSymbols)"
+              TargetFrameworks="@(_TargetFrameworks)"
+              AssemblyName="$(AssemblyName)"
+              PackageOutputPath="$(PackageOutputAbsolutePath)"
+              IncludeSymbols="$(IncludeSymbols)"
+              IncludeSource="$(IncludeSource)"
+              PackageTypes="$(PackageType)"
+              IsTool="$(IsTool)"
+              RepositoryUrl="$(RepositoryUrl)"
+              RepositoryType="$(RepositoryType)"
+              SourceFiles="@(_SourceFiles->Distinct())"
+              NoPackageAnalysis="$(NoPackageAnalysis)"
+              MinClientVersion="$(MinClientVersion)"
+              Serviceable="$(Serviceable)"
+              AssemblyReferences="@(_References)"
+              ContinuePackingAfterGeneratingNuspec="$(ContinuePackingAfterGeneratingNuspec)"
+              NuspecOutputPath="$(BaseIntermediateOutputPath)"
+              IncludeBuildOutput="$(IncludeBuildOutput)"
+              BuildOutputFolder="$(BuildOutputTargetFolder)"
+              ContentTargetFolders="$(ContentTargetFolders)"
+              RestoreOutputPath="$(RestoreOutputAbsolutePath)"
+              NuspecFile="$(NuspecFileAbsolutePath)"
+              NuspecBasePath="$(NuspecBasePath)"
+              NuspecProperties="$(NuspecProperties)"/>
+  </Target>
+
+</Project>