Skip to content

About

EasyEffects speaker tuning and Omarchy integration for the Dell XPS 14 DA14260

Topics

Resources

Stars

2 stars

Watchers

0 watching

Forks

Repository files navigation

XPS Audio Linux

An experimental EasyEffects speaker profile for the Dell XPS 14 DA14260 (0DB9) on PipeWire Linux systems.

The stock Linux speaker path already loads Dell's Cirrus smart-amplifier firmware, but it does not include the Windows Waves/MaxxAudio perceptual processing layer. This project adds a userspace approximation:

applications
    -> Easy Effects Sink
    -> bass enhancer
    -> convolution response
    -> 8-band multiband compressor
    -> safety limiter
    -> sof-soundwire internal speakers

It is not perfect and it is not an official Dell, Cirrus, or Waves profile. On the tested XPS 14, however, it is substantially fuller and less thin than the stock speaker sound.

Tested system

  • Dell XPS 14 DA14260, subsystem 0DB9
  • Four Cirrus CS35L57 smart amplifiers through SOF/SoundWire
  • Arch Linux / Omarchy
  • EasyEffects 8.2.8
  • PipeWire 1.6.8
  • WirePlumber 0.5.15
  • 48 kHz stereo speaker path

The installer refuses unsupported models unless --allow-unsupported-model is supplied. XPS 16 hardware was part of the earlier research, but this profile has not been validated there.

What is included

  • The portable xps-clone EasyEffects output preset
  • Its 48 kHz stereo convolution impulse response
  • Deterministic service-mode startup and preset loading
  • A current Omarchy/Hyprland Lua volume-key bridge
  • Enable, disable, status, verification, and uninstall commands

The repository deliberately does not include:

  • Windows audio drivers, Waves binaries, or Dell/Cirrus firmware blobs
  • EasyEffects generated database files
  • PipeWire/WirePlumber runtime state
  • The rejected May 2026 tuning experiments
  • The older direct PipeWire filter-chain as an install option

The distro-provided linux-firmware-cirrus package remains responsible for the low-level amplifier firmware and protection tuning.

Quick start on Omarchy / Arch

Install the runtime dependencies:

omarchy pkg add easyeffects calf lsp-plugins-lv2 linux-firmware-cirrus

Install the profile:

git clone https://github.com/spencerbull/xps-audio-linux.git
cd xps-audio-linux
./install.sh

Then verify:

./verify.sh

The installer:

  1. confirms the target laptop model and required commands;
  2. installs the portable preset and convolution response;
  3. detects the internal SOF/SoundWire speaker sink;
  4. records that hardware output in EasyEffects without replacing unrelated settings;
  5. installs and enables an EasyEffects user service;
  6. loads xps-clone, disables global bypass, and selects the EasyEffects sink;
  7. adds a marked, removable block to Omarchy's active ~/.config/hypr/bindings.lua.

Existing service files are backed up under ~/.local/state/xps-audio-linux/.

Daily use

Check status:

xps-audio-profile status

A/B compare the tuned and raw speaker paths:

xps-audio-profile disable
xps-audio-profile enable

disable bypasses EasyEffects and returns the default output to the physical speaker sink. enable reloads the preset and selects the EasyEffects sink.

The installed volume helper changes the underlying speaker volume when the EasyEffects virtual sink is selected. On any other default output it controls that output normally. This avoids the common case where the OSD moves but the actual laptop-speaker level does not.

Manual EasyEffects setup

If you do not want the installer:

  1. Copy profile/output/xps-clone.json to ~/.local/share/easyeffects/output/.
  2. Copy profile/irs/xps-clone.irs to ~/.local/share/easyeffects/irs/.
  3. Start EasyEffects and select the internal sof-soundwire ... Speaker device as its output.
  4. Load the xps-clone output preset.
  5. Keep the EasyEffects virtual sink at 100% and control loudness at the underlying hardware speaker sink.

EasyEffects upstream normally advises users not to make its virtual devices the system default because it can move streams itself. This project does so intentionally to reproduce the tested always-on Omarchy setup. Use xps-audio-profile disable before switching to a different output if your desktop does not reroute it automatically.

Uninstall

./uninstall.sh

The uninstaller removes only files that still match this checkout, removes the marked Hyprland block, restores a pre-existing service backup when one was captured, and restores the prior default output while it is still project-managed. It leaves the EasyEffects generated database alone.

Use ./uninstall.sh --keep-profile if you want to retain the preset and IR.

Verification and troubleshooting

Run:

./verify.sh

For a repository-only check that does not inspect the live audio graph:

./verify.sh --offline

If you installed with --no-hyprland, use:

./verify.sh --no-hyprland

Common checks:

systemctl --user status easyeffects.service
easyeffects --presets
easyeffects --last-loaded-preset output
pactl get-default-sink
wpctl status

If the profile loads but sounds raw, confirm EasyEffects is targeting the internal speaker sink. If volume keys show an OSD but loudness does not move, run xps-audio-volume raise directly and then ./verify.sh.

See docs/TUNING.md before changing the compressor or limiter. Small laptop speakers and smart amplifiers can distort or protectively clamp when low-frequency gain is pushed too far.

Project history and provenance

  • April 2026: a public PipeWire filter-chain prototype created an xps_speakers virtual sink.
  • May 2026: the work moved to EasyEffects. A more aggressive "warmer" pass was rejected, and experiments with XPS 16 firmware overrides were rolled back.
  • The final hardware direction is the official XPS 14 tuning from linux-firmware-cirrus, with userspace processing layered on top.
  • July 2026: the current xps-clone preset became the daily-driver profile.

The included impulse response is a locally generated experimental approximation, not an extracted firmware or Waves binary. The original generation notes were not retained, so this repository makes no claim of bit-for-bit reverse engineering or Windows parity.

License and trademarks

The repository is licensed under the MIT License.

Dell, XPS, Waves, and MaxxAudio are trademarks of their respective owners. This project is unaffiliated with and not endorsed by them.

About

EasyEffects speaker tuning and Omarchy integration for the Dell XPS 14 DA14260

Topics

Resources

Stars

2 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages