Aryaos 1.0.0

.github/workflows/pi-gen-action.yml

@@ -0,0 +1,148 @@
+name: pi-gen-action
+
+on:
+  push:
+    branches: [ main, aryaos_1.0.0 ]
+  pull_request:
+    branches: [ main ]
+
+env:
+  DUMP1090_RECEIVER_SERIAL: stx:1090:0
+  DUMP978_RECEIVER_SERIAL: stx:978:0
+  COMITUP_WEB_PORT: 9080
+  AOS_SERVICES: AISCOT ADSBCOT LINCOT DroneCOT nodered 
+
+jobs:
+  pi-gen-action:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out repository
+        uses: actions/checkout@v4
+
+      - name: List working directory
+        run: ls -alR ../
+
+      - name: Run pi-gen build
+        uses: usimd/pi-gen-action@v1
+        id: build
+        with:
+          # Compression to apply on final image (either "none", "zip", "xz" or "gz").
+          compression: zip
+
+          # Compression level to be used. From 0 to 9 (refer to the tool man page for more 
+          # information on this. Usually 0 is no compression but very fast, up to 9 with the 
+          # best compression but very slow).
+          compression-level: 6
+
+          # Disable the renaming of the first user during the first boot. This make it so 
+          # 'username' stays activated. 'username' must be set for this to work. Please be 
+          # aware of the implied security risk of defining a default username and password 
+          # for your devices.
+          disable-first-boot-user-rename: 1
+
+          # Additional options to include in PIGEN_DOCKER_OPTS
+          docker-opts: ''
+
+          # Set whether a NOOBS image should be built as well. If enabled, the output 
+          # directory containing the NOOBS files will be saved as output variable 
+          # 'image-noobs-path'.
+          enable-noobs: false
+
+          # Enable SSH access to Pi.
+          enable-ssh: 1
+
+          # If this feature is enabled, the action will configure pi-gen to not export any 
+          # stage as image but the last one defined in property 'stage-list'. This is 
+          # helpful when building a single image flavor (in contrast to building a 
+          # lite/server and full-blown desktop image), since it speeds up the build process 
+          # significantly.
+          export-last-stage-only: true
+
+          # Comma or whitespace separated list of additional packages to install on host 
+          # before running pi-gen. Use this list to add any packages your custom stages may 
+          # require. Note that this is not affecting the final image. In order to add 
+          # additional packages, you need to add a respective 'XX-packages' file in your 
+          # custom stage.
+          extra-host-dependencies: ''
+
+          # Comma or whitespace separated list of additional modules to load on host before 
+          # running pi-gen. If your custom stage requires additional software or kernel 
+          # modules to be loaded, add them here. Note that this is not meant to configure 
+          # modules to be loaded in the target image.
+          extra-host-modules: ''
+
+          # Token to use for checking out pi-gen repo.
+          github-token: ${{ github.token }}
+
+          # Host name of the image.
+          hostname: aryaos
+
+          # Final image name.
+          image-name: aryaos
+
+          # Default keyboard keymap.
+          keyboard-keymap: us
+
+          # Default keyboard layout.
+          keyboard-layout: English (US)
+
+          # Default locale of the system image.
+          locale: en_US.UTF-8
+
+          # Password of the intial user account, locked if empty.
+          password: aryaos415
+
+          # Path where selected pi-gen ref will be checked out to. If the path does not yet 
+          # exist, it will be created (including its parents).
+          pi-gen-dir: pi-gen
+
+          # The release name to use in `/etc/issue.txt`. The default should only be used for 
+          # official Raspberry Pi builds.
+          pi-gen-release: 'AryaOS: An Operating System for Modern Situational Awareness'
+
+          # GitHub repository to fetch pi-gen from, must be a fork from RPi-Distro/pi-gen.
+          pi-gen-repository: RPi-Distro/pi-gen
+
+          # Release version of pi-gen to use. This can both be a branch or tag name known in 
+          # the pi-gen repository.
+          pi-gen-version: arm64
+
+          # The release version to build images against. Valid values are jessie, stretch, 
+          # buster, bullseye, bookworm, and testing.
+          release: bookworm
+
+          # Setting to `1` will prevent pi-gen from dropping the "capabilities" feature. 
+          # Generating the root filesystem with capabilities enabled and running it from a 
+          # filesystem that does not support capabilities (like NFS) can cause issues. Only 
+          # enable this if you understand what it is.
+          setfcap: ''
+
+          # List of stage name to execute in given order. Relative and absolute paths to 
+          # custom stage directories are allowed here. Note that by default pi-gen exports 
+          # images in stage2 (lite), stage4 and stage5. You probably want to hook in custom 
+          # stages before one of the exported stages. Otherwise, the action will make sure 
+          # any custom stage will include an image export directive.
+          stage-list: stage0 stage1 stage2 ../aryaos/stage3-base ../aryaos/stage3-wifi ../aryaos/stage4-node-red ../aryaos/stage5-common ../aryaos/stage6-air ../aryaos/stage7-sea ../aryaos/stage8-uas ../aryaos/stage9-docker
+
+          # System timezone.
+          timezone: UTC
+
+          # Name of the initial user account.
+          username: pi
+
+          # Print all output from pi-gen.
+          verbose-output: true
+
+          # Wifi country code of default network to connect to.
+          wpa-country: US
+
+          # SSID of a default wifi network to connect to.
+          wpa-essid: AryaOS-WiFi
+
+          # Password of default wifi network to connect to.
+          wpa-password: aryaos415
+
+      - uses: actions/upload-artifact@v3
+        with:
+          name: pi-gen-image
+          path: ${{ steps.build.outputs.image-path }}

Makefile

@@ -23,6 +23,7 @@ pi-gen:
 
 copy:
 	rsync -va ../aryaos kelp.local:~/src/SNS/
+	rsync -va ../aryaos titan2.local:~/src/SNS/
 
 sync: copy
 
@@ -49,4 +50,4 @@ skip5:
 
 mkdocs:
 	pip install -r docs/requirements.txt
-	mkdocs serve
+	mkdocs serve

config

@@ -15,24 +15,27 @@
 # limitations under the License.
 #
 
-AOS_FLAVOR="aryaos"
-AOS_FLAVOR_ST="AryaOS"
+AOS_FLAVOR="AryaOS"
 
-IMG_NAME="aryaos-1.0.0-beta1"
+IMG_NAME="aryaos-1.0.0-beta10"
 
 PI_GEN_RELEASE="AryaOS: An Operating System for Modern Situational Awareness."
 TARGET_HOSTNAME="aryaos"
 FIRST_USER_NAME="pi"
 FIRST_USER_PASS="aryaos415"
-STAGE_LIST="stage0 stage1 stage2 ../stage3-wifi ../stage4-node-red ../stage5-common ../stage6-dump1090 ../stage7-adsbcot"
+STAGE_LIST="stage0 stage1 stage2 ../stage3-base ../stage3-wifi ../stage4-node-red ../stage5-common ../stage6-air ../stage7-sea ../stage8-uas ../stage9-docker"
 DISABLE_FIRST_BOOT_USER_RENAME=1
 RELEASE="bookworm"
+WPA_ESSID="AryaOS-WiFi"
+WPA_PASSWORD="aryaos415"
 WPA_COUNTRY="US"
 LOCALE_DEFAULT="en_US.UTF-8"
 KEYBOARD_LAYOUT="English (US)"
 KEYBOARD_KEYMAP="us"
 ENABLE_SSH=1
+APT_PROXY="http://172.17.2.88:3142"
 
 DUMP1090_RECEIVER_SERIAL="stx:1090:0"
 DUMP978_RECEIVER_SERIAL="stx:978:0" 
-
+COMITUP_WEB_PORT="9080"
+AOS_SERVICES="AISCOT ADSBCOT LINCOT DroneCOT nodered"

docs/build.md

@@ -1,17 +1,17 @@
 # Download or Build
 
-## Download AirTAK Open Source
+## Download AyraOS
 
-* Latest: [R02](https://drive.google.com/file/d/1ZaAzdc1E-pdhytGDDaUfkhIVFpyTmuGk/view?usp=sharing).
+* FIXME TK
 
-## Build AirTAK Open Source
+## Build AryaOS
 
-The build environment for AirTAK is based on [pi-gen](https://github.com/RPi-Distro/pi-gen). 
-The build will create a Raspberry Pi OS image, compatible with [Raspberry Pi Imager](https://www.raspberrypi.com/software/) or [Balena Etcher](https://etcher.balena.io/).
+The build environment for AryaOS is based on [pi-gen](https://github.com/RPi-Distro/pi-gen). 
+The build will create a Raspberry Pi OS image, compatible with [Raspberry Pi Imager](https://www.raspberrypi.com/software/).
 
 Any SD card larger than 16 GB should suffice to get started, 32 GB recommended.
 
-The AirTAK build procedure is inspired by @deltazero's [kiosk.pi](https://medium.com/@deltazero/making-kioskpi-custom-raspberry-pi-os-image-using-pi-gen-99aac2cd8cb6).
+The AryaOS build procedure is inspired by @deltazero's [kiosk.pi](https://medium.com/@deltazero/making-kioskpi-custom-raspberry-pi-os-image-using-pi-gen-99aac2cd8cb6).
 
 ### Build Steps
 
@@ -27,4 +27,4 @@ To Update a build:
 2. `make skip` to skip base-os build steps.
 3. `make buld` to create an image.
 
-N.B.: THe `make build` step will attempt to sudo, and may prompt for a password.
+N.B.: The `make build` step will attempt to sudo, and may prompt for a password.