transparent pics

openandroidinstaller/app_state.py

@@ -95,7 +95,7 @@ def toggle_flash_unlock_bootloader(self):
                     type="confirm_button",
                     content="If you already flashed TWRP, boot into it by pressing 'Confirm and run'. Otherwise restart the process. Once your phone screen looks like the picture on the left, continue.",
                     command="adb_reboot_recovery",
-                    img="twrp-start.jpeg",
+                    img="twrp-start.png",
                 )
             ]
 
@@ -117,6 +117,6 @@ def toggle_flash_recovery(self):
                     type="call_button",
                     content="If you already flashed TWRP, boot into it by pressing 'Confirm and run'. Otherwise restart the process. Once your phone screen looks like the picture on the left, continue.",
                     command="adb_reboot_recovery",
-                    img="twrp-start.jpeg",
+                    img="twrp-start.png",
                 )
             ]

openandroidinstaller/assets/configs/FP2.yaml

@@ -16,7 +16,7 @@ steps:
         Make sure your device is turned on and connected to the computer. Boot into the bootloader by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/FP3.yaml

@@ -54,7 +54,7 @@ steps:
         Turn on your device. Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Once the device is in fastboot mode, flash the custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/FP4.yaml

@@ -54,7 +54,7 @@ steps:
         Turn on your device. Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Once the device is in fastboot mode, boot the custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/Mi439.yaml

@@ -54,7 +54,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/addison.yaml

@@ -48,7 +48,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/ali.yaml

@@ -46,7 +46,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/alioth.yaml

@@ -47,7 +47,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/apollo.yaml

@@ -46,7 +46,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/avicii.yaml

@@ -41,7 +41,7 @@ steps:
         Note : If you have not selected additional partitions it will do nothing and is save to continue.
       command: fastboot_flash_additional_partitions
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -51,7 +51,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/bacon.yaml

@@ -38,7 +38,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/barbet.yaml

@@ -49,7 +49,7 @@ steps:
       content: >
         Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/begonia.yaml

@@ -48,7 +48,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/billie.yaml

@@ -37,7 +37,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -47,7 +47,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/blueline.yaml

@@ -38,7 +38,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once your phone screen looks like the picture on the left, continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/bonito.yaml

@@ -38,7 +38,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once your phone screen looks like the picture on the left, continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/cedric.yaml

@@ -46,7 +46,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/cheeseburger.yaml

@@ -34,7 +34,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/coral.yaml

@@ -57,7 +57,7 @@ steps:
         Note : If you have not selected additional partitions it will do nothing and is save to continue.
       command: fastboot_flash_additional_partitions
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/crosshatch.yaml

@@ -38,7 +38,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once your phone screen looks like the picture on the left, continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/cupid.yaml

@@ -48,7 +48,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/davinci.yaml

@@ -44,7 +44,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/dre.yaml

@@ -37,7 +37,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -47,7 +47,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/dumpling.yaml

@@ -34,7 +34,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/enchilada.yaml

@@ -32,7 +32,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -42,7 +42,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/evert.yaml

@@ -47,7 +47,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -57,7 +57,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/fajita.yaml

@@ -33,7 +33,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -43,7 +43,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/flame.yaml

@@ -51,7 +51,7 @@ steps:
       content: >
         Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/garden.yaml

@@ -49,7 +49,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/ginkgo.yaml

@@ -48,7 +48,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/griffin.yaml

@@ -52,7 +52,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/guacamole.yaml

@@ -35,7 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/guacamoleb.yaml

@@ -35,7 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/hotdog.yaml

@@ -35,7 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/hotdogb.yaml

@@ -35,7 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery

openandroidinstaller/assets/configs/jasminesprout.yaml

@@ -47,7 +47,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: twrp-start.jpeg
+      img: twrp-start.png
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.