OpTestInterrupt.py: This patch validates interrupt controller mechanism

testcases/OpTestInterrupt.py

@@ -0,0 +1,163 @@
+#!/usr/bin/env python3
+# IBM_PROLOG_BEGIN_TAG
+# This is an automatically generated prolog.
+#
+# $Source: op-test-framework/testcases/OpTestInterrupt.py $
+#
+# OpenPOWER Automated Test Project
+#
+# Contributors Listed Below - COPYRIGHT 2020
+# [+] International Business Machines Corp.
+#
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# permissions and limitations under the License.
+#
+# IBM_PROLOG_END_TAG
+
+'''
+OpTestInterrupt
+---------------
+This module contain testcases related to XIVE.
+1.Enable kernel logging,basically generate console traffic 
+by printing the processes/tasks to the console
+2.check Xive is configured properly or not
+3.check system reboot with xive=on and xive=off
+4.validate interrupts handled by CPU's
+'''
+import os
+import re
+import sys
+import time
+import pexpect
+import unittest
+import subprocess
+
+import OpTestConfiguration
+from common import OpTestHMC, OpTestFSP
+from common.OpTestError import OpTestError
+from common.OpTestSystem import OpSystemState
+from common.OpTestSSH import ConsoleState as SSHConnectionState
+from common.OpTestConstants import OpTestConstants as BMC_CONST
+
+import logging
+import OpTestLogger
+log = OpTestLogger.optest_logger_glob.get_logger(__name__)
+
+
+class OpTestInterrupt(unittest.TestCase):
+    def setUp(self):
+        conf = OpTestConfiguration.conf
+        self.cv_SYSTEM = conf.system()
+        self.c = self.cv_SYSTEM.console
+        self.con = self.cv_SYSTEM.cv_HOST.get_ssh_connection()
+
+    def enable_consoletraffic(self):
+        '''
+        Enable kernel logging, basically generate console traffic by printing the 
+        processes/tasks to the console
+        '''
+        self.c.run_command("echo 10 > /proc/sys/kernel/printk")
+        try:
+            i = 1
+            while i <= 10: 
+                self.c.run_command("echo t > /proc/sysrq-trigger", timeout=600)
+                i = i+1
+        except(KernelOOPS, KernelKdump):
+            self.cv_SYSTEM.goto_state(OpSystemState.OS)
+        self.c.run_command("echo $?")
+
+class XiveTest(OpTestInterrupt):
+    '''
+    1.This function will check xive is configured properly or not
+    2.check for system reboot with Xive=off and on
+    '''
+    def setup_test(self):
+        self.cv_SYSTEM.goto_state(OpSystemState.OS)
+        self.con.run_command("uname -a")
+        result = self.con.run_command("grep -i --color=never xive /boot/config-`uname -r`")
+        for line in result:
+            temp = ''.join(self.con.run_command("echo %s | cut -d '=' -f 2" % line))
+            if temp != 'y':
+                self.fail("xive is not configured properly")
+        res = self.con.run_command("cat /etc/os-release | grep NAME | head -1")
+        if 'SLES' in res[0].strip():
+            self.con.run_command_ignore_fail("sed -i -e 's/xive=.* / /' -e 's/xive=.*/\"/' /etc/default/grub")
+            self.con.run_command("sed -i '/GRUB_CMDLINE_LINUX_DEFAULT/s/\"$/ xive=off\"/' /etc/default/grub")
+            self.sles_grub_update()
+            self.con.run_command("sed -i 's/xive=.*/xive=on\"/' /etc/default/grub")
+            self.sles_grub_update()
+        elif 'Red Hat' in res[0].strip():
+            self.rhel_grub_update('off')
+            self.rhel_grub_update('on')
+
+    def sles_grub_update(self):
+        self.con.run_command("grub2-mkconfig -o /boot/grub2/grub.cfg")
+        self.con.run_command("sync;sleep 10")
+        self.cv_SYSTEM.goto_state(OpSystemState.OFF)
+        self.cv_SYSTEM.goto_state(OpSystemState.OS)
+        self.con.run_command("cat /proc/cmdline")
+
+    def rhel_grub_update(self, param):
+        '''
+        This function will pass xive=on and off parameters to command line
+        '''
+        self.con.run_command("grubby --info=/boot/vmlinuz-`uname -r`")
+        self.con.run_command_ignore_fail("grubby --remove-args=xive* --update-kernel=/boot/vmlinuz-`uname -r`")
+        self.con.run_command("grubby --args=xive=%s --update-kernel=/boot/vmlinuz-`uname -r`" % param)
+        self.con.run_command("sync; sync; sleep 5")
+        self.cv_SYSTEM.goto_state(OpSystemState.OFF)
+        self.cv_SYSTEM.goto_state(OpSystemState.OS)
+        self.con.run_command("grubby --info=/boot/vmlinuz-`uname -r`")
+
+    def interrupt_cpu_check(self): 
+        '''
+        This function will validate interrupts handled by CPU's.
+        '''
+        self.con = self.cv_SYSTEM.cv_HOST.get_ssh_connection()
+        res = self.con.run_command("ip route list | grep default | awk '{print $5}'")
+        interrupt = "cat /proc/interrupts | grep %s | head -1" % res[0]
+        self.con.run_command(interrupt)
+        self.con.run_command("ppc64_cpu --cores-on")
+        self.con.run_command("ppc64_cpu --cores-on=1")
+        self.con.run_command(interrupt)
+        temp = "%s | awk '{print $2}'" % interrupt
+        self.con.run_command("ppc64_cpu --smt=off")
+        tmp1 = self.con.run_command(temp)
+        time.sleep(10)
+        tmp2 = self.con.run_command(temp)
+        if (tmp1[0] < tmp2[0]):
+            log.info("Interrupts are handled by CPU0")
+            self.con.run_command("ppc64_cpu --cores-on=all")
+            self.con.run_command("ppc64_cpu --smt=on")
+            output = self.con.run_command(interrupt)
+            cmd = "%s | awk '{print $4}'" % interrupt
+            tmp3 = self.con.run_command(cmd)
+            smp = "%s | awk '{print $1}'" % interrupt
+            result = self.con.run_command(smp)
+            log.info("setting smp_affinity_list to CPU2")
+            self.con.run_command("echo 2 > /proc/irq/%s/smp_affinity_list" % result[0].lstrip().split(':')[0])
+            self.con.run_command(interrupt)
+            time.sleep(10)
+            tmp4 = self.con.run_command(cmd)
+            if (tmp3[0] < tmp4[0]):
+                log.info("Interrupts are handled by CPU2")
+            else:
+                self.fail("Interrupts are not handled by CPU2")
+        else:
+            self.fail("Interrupts are not handled by CPU")
+
+    def runTest(self):
+        self.setup_test()
+        self.enable_consoletraffic()
+        self.interrupt_cpu_check()
+