Merge tag 'v6.6.99-rt58' into nilrt/master/6.6 #243
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 00a39d8652ff9088de07a6fe6e9e1893452fe0dd upstream. cmos_interrupt() can be called in a non-interrupt context, such as in an ACPI event handler (which runs in an interrupt thread). Therefore, usage of spin_lock(&rtc_lock) is insecure. Use spin_lock_irqsave() / spin_unlock_irqrestore() instead. Before a misguided commit 6950d04 ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") the cmos_interrupt() function used spin_lock_irqsave(). That commit changed it to spin_lock() and broke locking, which was partially fixed in commit 13be2ef ("rtc: cmos: Disable irq around direct invocation of cmos_interrupt()") That second commit did not take account of the ACPI fixed event handler pathway, however. It introduced local_irq_disable() workarounds in cmos_check_wkalrm(), which can cause problems on PREEMPT_RT kernels and are now unnecessary. Add an explicit comment so that this change will not be reverted by mistake. Cc: [email protected] Fixes: 6950d04 ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") Signed-off-by: Mateusz Jończyk <[email protected]> Reviewed-by: Sebastian Andrzej Siewior <[email protected]> Tested-by: Chris Bainbridge <[email protected]> Reported-by: Chris Bainbridge <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 315dbdd7cdf6aa533829774caaf4d25f1fd20e73 upstream. In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check. Cc: <[email protected]> Fixes: 4941d47 ("virtio-net: do not reset during XDP set") Signed-off-by: Bui Quang Minh <[email protected]> Acked-by: Jason Wang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b97a7972b1f4f81417840b9a2ab0c19722b577d5 upstream. If a device is disabled unblocking load/store on its own is not useful as a full re-enable of the function is necessary anyway. Note that SCLP Write Event Data Action Qualifier 0 (Reset) leaves the device disabled and triggers this case unless the driver already requests a reset. Cc: [email protected] Fixes: 4cdf2f4 ("s390/pci: implement minimal PCI error recovery") Reviewed-by: Farhan Ali <[email protected]> Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…g it commit 223e2288f4b8c262a864e2c03964ffac91744cd5 upstream. In vmci_transport_packet_init memset the vmci_transport_packet before populating the fields to avoid any uninitialised data being left in the structure. Cc: Bryan Tan <[email protected]> Cc: Vishnu Dasa <[email protected]> Cc: Broadcom internal kernel review list Cc: Stefano Garzarella <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Simon Horman <[email protected]> Cc: [email protected] Cc: [email protected] Cc: stable <[email protected]> Signed-off-by: HarshaVardhana S A <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Fixes: d021c34 ("VSOCK: Introduce VM Sockets") Acked-by: Stefano Garzarella <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…mode commit 2881ba9af073faa8ee7408a8d1e0575e50eb3f6c upstream. Add a helper function for dump register in dynamic debug mode. Signed-off-by: Victor Shih <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit dcc3bcfc5b50c625b475dcc25d167b6b947a6637 upstream. It has turned out the trying to strictly conform to the SDHCI specification is causing problems. Let's revert and start over. This reverts commit fb3bbc4. Cc: Erick Shepherd <[email protected]> Cc: [email protected] Fixes: fb3bbc4 ("mmc: sdhci: Disable SD card clock before changing parameters") Suggested-by: Adrian Hunter <[email protected]> Reported-by: Jonathan Liu <[email protected]> Reported-by: Salvatore Bonaccorso <[email protected]> Closes: https://bugs.debian.org/1108065 Acked-by: Adrian Hunter <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 009c3a4bc41e855fd76f92727f9fbae4e5917d7f upstream. Move the BROKEN_SD_DISCARD quirk for certain SanDisk SD cards from the `mmc_blk_fixups[]` to `mmc_sd_fixups[]`. This ensures the quirk is applied earlier in the device initialization process, aligning with the reasoning in [1]. Applying the quirk sooner prevents the kernel from incorrectly enabling discard support on affected cards during initial setup. [1] https://lore.kernel.org/all/[email protected] Fixes: 07d2872 ("mmc: core: Add SD card quirk for broken discard") Signed-off-by: Avri Altman <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 46c0d947b64ac8efcf89dd754213dab5d1bd00aa upstream. This reverts minor parts of the changes made in commit b338d91 ("Bluetooth: Implement support for Mesh"). It looks like these changes were only made for development purposes but shouldn't have been part of the commit. Fixes: b338d91 ("Bluetooth: Implement support for Mesh") Cc: [email protected] Signed-off-by: Christian Eggers <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e5af67a870f738bb8a4594b6c60c2caf4c87a3c9 upstream. According to the message of commit b338d91 ("Bluetooth: Implement support for Mesh"), MGMT_OP_SET_MESH_RECEIVER should set the passive scan parameters. Currently the scan interval and window parameters are silently ignored, although user space (bluetooth-meshd) expects that they can be used [1] [1] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/mesh/mesh-io-mgmt.c#n344 Fixes: b338d91 ("Bluetooth: Implement support for Mesh") Cc: [email protected] Signed-off-by: Christian Eggers <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f3cb5676e5c11c896ba647ee309a993e73531588 upstream. The unconditional call of hci_disable_advertising_sync() in mesh_send_done_sync() also disables other LE advertisings (non mesh related). I am not sure whether this call is required at all, but checking the adv_instances list (like done at other places) seems to solve the problem. Fixes: b338d91 ("Bluetooth: Implement support for Mesh") Cc: [email protected] Signed-off-by: Christian Eggers <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c9764fd88bc744592b0604ccb6b6fc1a5f76b4e3 upstream. drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But the memory is allocated for only one pointer. This will lead to out-of-bounds access later in the code if 'config::ngpios' is > 1. So fix the code to allocate enough memory to hold 'config::ngpios' of GPIO descriptors. While at it, also move the check for memory allocation failure to be below the allocation to make it more readable. Cc: [email protected] # 5.0 Fixes: d6cd33a ("regulator: gpio: Convert to use descriptors") Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit af4db5a35a4ef7a68046883bfd12468007db38f1 upstream. A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition. Fixes: 0e3bb7d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable <[email protected]> Signed-off-by: RD Babiera <[email protected]> Reviewed-by: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 539d80575b810c7a5987c7ac8915e3bc99c03695 upstream.
When swiotlb buffer is full, the dma_map_sg() returns 0 to
msdc_prepare_data(), but it does not check it and sets the
MSDC_PREPARE_FLAG.
swiotlb_tbl_map_single() /* prints "swiotlb buffer is full" */
<-swiotlb_map()
<-dma_direct_map_page()
<-dma_direct_map_sg()
<-__dma_map_sg_attrs()
<-dma_map_sg_attrs()
<-dma_map_sg() /* returns 0 (pages mapped) */
<-msdc_prepare_data()
Then, the msdc_unprepare_data() checks MSDC_PREPARE_FLAG and calls
dma_unmap_sg() with unmapped pages. It causes a page fault.
To fix this problem, Do not set MSDC_PREPARE_FLAG if dma_map_sg()
fails because this is not prepared.
Fixes: 2084890 ("mmc: mediatek: Add Mediatek MMC driver")
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Tested-by: Sergey Senozhatsky <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/174908565814.4056588.769599127120955383.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f5de469990f19569627ea0dd56536ff5a13beaa3 upstream. If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it. Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Fixes: 2084890 ("mmc: mediatek: Add Mediatek MMC driver") Cc: [email protected] Link: https://lore.kernel.org/r/174972756982.3337526.6755001617701603082.stgit@mhiramat.tok.corp.google.com Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ec54c0a20709ed6e56f40a8d59eee725c31a916b upstream. Do not leave host with dangling ->mrq pointer if we hit the msdc_prepare_data() error out path. Signed-off-by: Sergey Senozhatsky <[email protected]> Reviewed-by: Masami Hiramatsu (Google) <[email protected]> Fixes: f5de469990f1 ("mtk-sd: Prevent memory corruption from DMA map failure") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit ac1daa91e9370e3b88ef7826a73d62a4d09e2717 ]
Fix the following `make dtbs_check` warnings for all t8103 based devices:
arch/arm64/boot/dts/apple/t8103-j274.dtb: network@0,0: $nodename:0: 'network@0,0' does not match '^wifi(@.*)?$'
from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
arch/arm64/boot/dts/apple/t8103-j274.dtb: network@0,0: Unevaluated properties are not allowed ('local-mac-address' was unexpected)
from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
Fixes: bf2c05b ("arm64: dts: apple: t8103: Expose PCI node for the WiFi MAC address")
Signed-off-by: Janne Grunau <[email protected]>
Reviewed-by: Sven Peter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sven Peter <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 109f4d29dade8ae5b4ac6325af9d1bc24b4230f8 ] Fix warnings reported by sparse, related to incorrect type: drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types) drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: 78034cb ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors") Signed-off-by: David Thompson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8edab8a72d67742f87e9dc2e2b0cdfddda5dc29a ] The obj_event may be loaded immediately after inserted, then if the list_head is not initialized then we may get a poisonous pointer. This fixes the crash below: mlx5_core 0000:03:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced) mlx5_core.sf mlx5_core.sf.4: firmware version: 32.38.3056 mlx5_core 0000:03:00.0 en3f0pf0sf2002: renamed from eth0 mlx5_core.sf mlx5_core.sf.4: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps IPv6: ADDRCONF(NETDEV_CHANGE): en3f0pf0sf2002: link becomes ready Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007760fb000 [0000000000000060] pgd=000000076f6d7003, p4d=000000076f6d7003, pud=0000000777841003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] SMP Modules linked in: ipmb_host(OE) act_mirred(E) cls_flower(E) sch_ingress(E) mptcp_diag(E) udp_diag(E) raw_diag(E) unix_diag(E) tcp_diag(E) inet_diag(E) binfmt_misc(E) bonding(OE) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) isofs(E) cdrom(E) mst_pciconf(OE) ib_umad(OE) mlx5_ib(OE) ipmb_dev_int(OE) mlx5_core(OE) kpatch_15237886(OEK) mlxdevm(OE) auxiliary(OE) ib_uverbs(OE) ib_core(OE) psample(E) mlxfw(OE) tls(E) sunrpc(E) vfat(E) fat(E) crct10dif_ce(E) ghash_ce(E) sha1_ce(E) sbsa_gwdt(E) virtio_console(E) ext4(E) mbcache(E) jbd2(E) xfs(E) libcrc32c(E) mmc_block(E) virtio_net(E) net_failover(E) failover(E) sha2_ce(E) sha256_arm64(E) nvme(OE) nvme_core(OE) gpio_mlxbf3(OE) mlx_compat(OE) mlxbf_pmc(OE) i2c_mlxbf(OE) sdhci_of_dwcmshc(OE) pinctrl_mlxbf3(OE) mlxbf_pka(OE) gpio_generic(E) i2c_core(E) mmc_core(E) mlxbf_gige(OE) vitesse(E) pwr_mlxbf(OE) mlxbf_tmfifo(OE) micrel(E) mlxbf_bootctl(OE) virtio_ring(E) virtio(E) ipmi_devintf(E) ipmi_msghandler(E) [last unloaded: mst_pci] CPU: 11 PID: 20913 Comm: rte-worker-11 Kdump: loaded Tainted: G OE K 5.10.134-13.1.an8.aarch64 #1 Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.2.2.12968 Oct 26 2023 pstate: a0400089 (NzCv daIf +PAN -UAO -TCO BTYPE=--) pc : dispatch_event_fd+0x68/0x300 [mlx5_ib] lr : devx_event_notifier+0xcc/0x228 [mlx5_ib] sp : ffff80001005bcf0 x29: ffff80001005bcf0 x28: 0000000000000001 x27: ffff244e0740a1d8 x26: ffff244e0740a1d0 x25: ffffda56beff5ae0 x24: ffffda56bf911618 x23: ffff244e0596a480 x22: ffff244e0596a480 x21: ffff244d8312ad90 x20: ffff244e0596a480 x19: fffffffffffffff0 x18: 0000000000000000 x17: 0000000000000000 x16: ffffda56be66d620 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000040 x10: ffffda56bfcafb50 x9 : ffffda5655c25f2c x8 : 0000000000000010 x7 : 0000000000000000 x6 : ffff24545a2e24b8 x5 : 0000000000000003 x4 : ffff80001005bd28 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff244e0596a480 x0 : ffff244d8312ad90 Call trace: dispatch_event_fd+0x68/0x300 [mlx5_ib] devx_event_notifier+0xcc/0x228 [mlx5_ib] atomic_notifier_call_chain+0x58/0x80 mlx5_eq_async_int+0x148/0x2b0 [mlx5_core] atomic_notifier_call_chain+0x58/0x80 irq_int_handler+0x20/0x30 [mlx5_core] __handle_irq_event_percpu+0x60/0x220 handle_irq_event_percpu+0x3c/0x90 handle_irq_event+0x58/0x158 handle_fasteoi_irq+0xfc/0x188 generic_handle_irq+0x34/0x48 ... Fixes: 7597385 ("IB/mlx5: Enable subscription for device events over DEVX") Link: https://patch.msgid.link/r/3ce7f20e0d1a03dc7de6e57494ec4b8eaf1f05c2.1750147949.git.leon@kernel.org Signed-off-by: Mark Zhang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e8d6f3ab59468e230f3253efe5cb63efa35289f7 ] syzbot reported a warning below [1] following a fault injection in nfs_fs_proc_net_init(). [0] When nfs_fs_proc_net_init() fails, /proc/net/rpc/nfs is not removed. Later, rpc_proc_exit() tries to remove /proc/net/rpc, and the warning is logged as the directory is not empty. Let's handle the error of nfs_fs_proc_net_init() properly. [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) should_fail_ex (lib/fault-inject.c:73 lib/fault-inject.c:174) should_failslab (mm/failslab.c:46) kmem_cache_alloc_noprof (mm/slub.c:4178 mm/slub.c:4204) __proc_create (fs/proc/generic.c:427) proc_create_reg (fs/proc/generic.c:554) proc_create_net_data (fs/proc/proc_net.c:120) nfs_fs_proc_net_init (fs/nfs/client.c:1409) nfs_net_init (fs/nfs/inode.c:2600) ops_init (net/core/net_namespace.c:138) setup_net (net/core/net_namespace.c:443) copy_net_ns (net/core/net_namespace.c:576) create_new_namespaces (kernel/nsproxy.c:110) unshare_nsproxy_namespaces (kernel/nsproxy.c:218 (discriminator 4)) ksys_unshare (kernel/fork.c:3123) __x64_sys_unshare (kernel/fork.c:3190) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> [1]: remove_proc_entry: removing non-empty directory 'net/rpc', leaking at least 'nfs' WARNING: CPU: 1 PID: 6120 at fs/proc/generic.c:727 remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727 Modules linked in: CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 RIP: 0010:remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727 Code: 3c 02 00 0f 85 85 00 00 00 48 8b 93 d8 00 00 00 4d 89 f0 4c 89 e9 48 c7 c6 40 ba a2 8b 48 c7 c7 60 b9 a2 8b e8 33 81 1d ff 90 <0f> 0b 90 90 e9 5f fe ff ff e8 04 69 5e ff 90 48 b8 00 00 00 00 00 RSP: 0018:ffffc90003637b08 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88805f534140 RCX: ffffffff817a92c8 RDX: ffff88807da99e00 RSI: ffffffff817a92d5 RDI: 0000000000000001 RBP: ffff888033431ac0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888033431a00 R13: ffff888033431ae4 R14: ffff888033184724 R15: dffffc0000000000 FS: 0000555580328500(0000) GS:ffff888124a62000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f71733743e0 CR3: 000000007f618000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sunrpc_exit_net+0x46/0x90 net/sunrpc/sunrpc_syms.c:76 ops_exit_list net/core/net_namespace.c:200 [inline] ops_undo_list+0x2eb/0xab0 net/core/net_namespace.c:253 setup_net+0x2e1/0x510 net/core/net_namespace.c:457 copy_net_ns+0x2a6/0x5f0 net/core/net_namespace.c:574 create_new_namespaces+0x3ea/0xa90 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:218 ksys_unshare+0x45b/0xa40 kernel/fork.c:3121 __do_sys_unshare kernel/fork.c:3192 [inline] __se_sys_unshare kernel/fork.c:3190 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3190 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x490 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa1a6b8e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff3a090368 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007fa1a6db5fa0 RCX: 00007fa1a6b8e929 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000080 RBP: 00007fa1a6c10b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa1a6db5fa0 R14: 00007fa1a6db5fa0 R15: 0000000000000001 </TASK> Fixes: d47151b ("nfs: expose /proc/net/sunrpc/nfs in net namespaces") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=a4cc4ac22daa4a71b87c Tested-by: [email protected] Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c01776287414ca43412d1319d2877cbad65444ac ] We found a few different systems hung up in writeback waiting on the same page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count was zero. It seems most likely that this is another race between the waiter and waker similar to commit ed0172a ("SUNRPC: Fix a race to wake a sync task"). Fix it up by applying the advised barrier. Fixes: 880265c ("pNFS: Avoid a live lock condition in pnfs_update_layout()") Signed-off-by: Benjamin Coddington <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c3b214719a87735d4f67333a8ef3c0e31a34837c ] dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is often ~0. The error value should be tested with dma_mapping_error() like it was done in qla26xx_dport_diagnostics(). Fixes: 818c7f8 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP") Signed-off-by: Thomas Fourier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 00f452a1b084efbe8dcb60a29860527944a002a1 ] dma_map_XXX() can fail and should be tested for errors with dma_mapping_error(). Fixes: b3a271a ("[SCSI] qla4xxx: support iscsiadm session mgmt") Signed-off-by: Thomas Fourier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 021f243627ead17eb6500170256d3d9be787dad8 ] Change "resourse" into "resource" in the name of a sysfs attribute. Fixes: d829fc8 ("scsi: ufs: sysfs: unit descriptor") Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Avri Altman <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3cc1dbfddf88dc5ecce0a75185061403b1f7352d ] To get the device HW counters, a non-representor switchdev device should use the mlx5_ib_query_q_counters() function and query all of the available counters. While a representor device in switchdev mode should use the mlx5_ib_query_q_counters_vport() function and query only the Q_Counters without the PPCNT counters and congestion control counters, since they aren't relevant for a representor device. Currently a non-representor switchdev device skips querying the PPCNT counters and congestion control counters, leaving them unupdated. Fix that by properly querying those counters for non-representor devices. Fixes: d22467a ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics") Signed-off-by: Patrisious Haddad <[email protected]> Reviewed-by: Maher Sanalla <[email protected]> Link: https://patch.msgid.link/56bf8af4ca8c58e3fb9f7e47b1dca2009eeeed81.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit acd245b1e33fc4b9d0f2e3372021d632f7ee0652 ] In case, CC counters are querying for the second port use the correct core device for the query instead of always using the master core device. Fixes: aac4492 ("IB/mlx5: Update counter implementation for dual port RoCE") Signed-off-by: Patrisious Haddad <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Link: https://patch.msgid.link/9cace74dcf106116118bebfa9146d40d4166c6b0.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a9a9e68954f29b1e197663f76289db4879fd51bb ] Always enable vport loopback for both MPV devices on driver start. Previously in some cases related to MPV RoCE, packets weren't correctly executing loopback check at vport in FW, since it was disabled. Due to complexity of identifying such cases for MPV always enable vport loopback for both GVMIs when binding the slave to the master port. Fixes: 0042f9e ("RDMA/mlx5: Enable vport loopback when user context or QP mandate") Signed-off-by: Patrisious Haddad <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Link: https://patch.msgid.link/d4298f5ebb2197459e9e7221c51ecd6a34699847.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d07143b507c51c04c091081627c5a130e9d3c517 ] change error log to use correct bus number from main_mux_devs instead of cpld_devs. Fixes: 662f248 ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Alok Tiwari <[email protected]> Reviewed-by: Vadim Pasternak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 1f029b4e30a602db33dedee5ac676e9236ad193c ] When PA Create Sync is enabled, advertising resumes unexpectedly. Therefore, it's necessary to check whether advertising is currently active before attempting to pause it. < HCI Command: LE Add Device To... (0x08|0x0011) plen 7 #1345 [hci0] 48.306205 Address type: Random (0x01) Address: 4F:84:84:5F:88:17 (Resolvable) Identity type: Random (0x01) Identity: FC:5B:8C:F7:5D:FB (Static) < HCI Command: LE Set Address Re.. (0x08|0x002d) plen 1 #1347 [hci0] 48.308023 Address resolution: Enabled (0x01) ... < HCI Command: LE Set Extended A.. (0x08|0x0039) plen 6 #1349 [hci0] 48.309650 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x01 Duration: 0 ms (0x00) Max ext adv events: 0 ... < HCI Command: LE Periodic Adve.. (0x08|0x0044) plen 14 #1355 [hci0] 48.314575 Options: 0x0000 Use advertising SID, Advertiser Address Type and address Reporting initially enabled SID: 0x02 Adv address type: Random (0x01) Adv address: 4F:84:84:5F:88:17 (Resolvable) Identity type: Random (0x01) Identity: FC:5B:8C:F7:5D:FB (Static) Skip: 0x0000 Sync timeout: 20000 msec (0x07d0) Sync CTE type: 0x0000 Fixes: ad383c2 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled") Signed-off-by: Yang Li <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…g log replay [ Upstream commit 6561a40ceced9082f50c374a22d5966cf9fc5f5c ] During log replay, at __add_inode_ref(), when we are searching for inode ref keys we totally ignore if btrfs_search_slot() returns an error. This may make a log replay succeed when there was an actual error and leave some metadata inconsistency in a subvolume tree. Fix this by checking if an error was returned from btrfs_search_slot() and if so, return it to the caller. Fixes: e02119d ("Btrfs: Add a write ahead tree log to optimize synchronous operations") Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 54a7081ed168b72a8a2d6ef4ba3a1259705a2926 ] At __inode_add_ref() when processing extrefs, if we jump into the next label we have an undefined value of victim_name.len, since we haven't initialized it before we did the goto. This results in an invalid memory access in the next iteration of the loop since victim_name.len was not initialized to the length of the name of the current extref. Fix this by initializing victim_name.len with the current extref's name length. Fixes: e43eec8 ("btrfs: use struct qstr instead of name and namelen pairs") Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 969127b ] Add additional checks that queue depth and number of queues are non-zero. Signed-off-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c489096 ] The DMA map functions can fail and should be tested for errors. Signed-off-by: Thomas Fourier <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 2d65fc1 ] When compiling with clang (19.1.7), initializing *vp using a compound literal may result in excessive stack usage. Fix it by initializing the required fields of *vp individually. Without this patch: $ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0 ... 0x0000000000000540 vector_eth_configure [vector_kern.o]:1472 ... With this patch: $ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0 ... 0x0000000000000540 vector_eth_configure [vector_kern.o]:208 ... Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Tiwei Bie <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 88a8006 ] Like ftruncate and write, fallocate operations on the same file cannot be executed in parallel, so it is better to make fallocate be hashed work. Signed-off-by: Fengnan Chang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7186b81 ] This patch adds DMI-based quirk for the Acer Nitro ANV15-41, allowing the internal microphone to be detected correctly on machines with "RB" as board vendor. Signed-off-by: Yuzuru <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 68cc9d3 ] The HP Pavilion Laptop 15-eg100 has Realtek HDA codec ALC287. It needs the ALC287_FIXUP_HP_GPIO_LED quirk to enable the mute LED. Signed-off-by: Yasmin Fitzgerald <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 0b39b05 ] Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip. 0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9071 Rev= 5.15 S: Manufacturer=SIMCOM S: Product=SDXBAAGHA-IDP _SN:D744C4C5 S: SerialNumber=0123456789ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=none E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Xiaowei Li <[email protected]> Acked-by: Bjørn Mork <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a890523 ] Add "Thinkpad X1 Tablet Gen 2 Keyboard" PID to hid-lenovo driver to fix trackpoint not working issue. Signed-off-by: Akira Inoue <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e0fca6f ] MANA supports RDMA in PF mode. The driver should record the doorbell physical address when in PF mode. The doorbell physical address is used by the RDMA driver to map doorbell pages of the device to user-mode applications through RDMA verbs interface. In the past, they have been mapped to user-mode while the device is in VF mode. With the support for PF mode implemented, also expose those pages in PF mode. Support for PF mode is implemented in 290e5d3 ("net: mana: Add support for Multi Vports on Bare metal") Signed-off-by: Long Li <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 1961d20 ] When building the free space tree with the block group tree feature enabled, we can hit an assertion failure like this: BTRFS info (device loop0 state M): rebuilding free space tree assertion failed: ret == 0, in fs/btrfs/free-space-tree.c:1102 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1102! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Modules linked in: CPU: 1 UID: 0 PID: 6592 Comm: syz-executor322 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 lr : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 sp : ffff8000a4ce7600 x29: ffff8000a4ce76e0 x28: ffff0000c9bc6000 x27: ffff0000ddfff3d8 x26: ffff0000ddfff378 x25: dfff800000000000 x24: 0000000000000001 x23: ffff8000a4ce7660 x22: ffff70001499cecc x21: ffff0000e1d8c160 x20: ffff0000e1cb7800 x19: ffff0000e1d8c0b0 x18: 00000000ffffffff x17: ffff800092f39000 x16: ffff80008ad27e48 x15: ffff700011e740c0 x14: 1ffff00011e740c0 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011e740c0 x10: 0000000000ff0100 x9 : 94ef24f55d2dbc00 x8 : 94ef24f55d2dbc00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a4ce6f98 x4 : ffff80008f415ba0 x3 : ffff800080548ef0 x2 : 0000000000000000 x1 : 0000000100000000 x0 : 000000000000003e Call trace: populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 (P) btrfs_rebuild_free_space_tree+0x14c/0x54c fs/btrfs/free-space-tree.c:1337 btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074 btrfs_remount_rw fs/btrfs/super.c:1319 [inline] btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543 reconfigure_super+0x1d4/0x6f0 fs/super.c:1083 do_remount fs/namespace.c:3365 [inline] path_mount+0xb34/0xde0 fs/namespace.c:4200 do_mount fs/namespace.c:4221 [inline] __do_sys_mount fs/namespace.c:4432 [inline] __se_sys_mount fs/namespace.c:4409 [inline] __arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: f0047182 91178042 528089c3 9771d47b (d4210000) ---[ end trace 0000000000000000 ]--- This happens because we are processing an empty block group, which has no extents allocated from it, there are no items for this block group, including the block group item since block group items are stored in a dedicated tree when using the block group tree feature. It also means this is the block group with the highest start offset, so there are no higher keys in the extent root, hence btrfs_search_slot_for_read() returns 1 (no higher key found). Fix this by asserting 'ret' is 0 only if the block group tree feature is not enabled, in which case we should find a block group item for the block group since it's stored in the extent root and block group item keys are greater than extent item keys (the value for BTRFS_BLOCK_GROUP_ITEM_KEY is 192 and for BTRFS_EXTENT_ITEM_KEY and BTRFS_METADATA_ITEM_KEY the values are 168 and 169 respectively). In case 'ret' is 1, we just need to add a record to the free space tree which spans the whole block group, and we can achieve this by making 'ret == 0' as the while loop's condition. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ff78538 ] Programs using poll() on /dev/vcsa to be notified when VT changes occur were missing one case: the switch from gfx to text mode. Signed-off-by: Nicolas Pitre <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d4adf1c ] BPF_MAP_TYPE_LRU_HASH can recycle most recent elements well before the map is full, due to percpu reservations and force shrink before neighbor stealing. Once a CPU is unable to borrow from the global map, it will once steal one elem from a neighbor and after that each time flush this one element to the global list and immediately recycle it. Batch value LOCAL_FREE_TARGET (128) will exhaust a 10K element map with 79 CPUs. CPU 79 will observe this behavior even while its neighbors hold 78 * 127 + 1 * 15 == 9921 free elements (99%). CPUs need not be active concurrently. The issue can appear with affinity migration, e.g., irqbalance. Each CPU can reserve and then hold onto its 128 elements indefinitely. Avoid global list exhaustion by limiting aggregate percpu caches to half of map size, by adjusting LOCAL_FREE_TARGET based on cpu count. This change has no effect on sufficiently large tables. Similar to LOCAL_NR_SCANS and lru->nr_scans, introduce a map variable lru->free_target. The extra field fits in a hole in struct bpf_lru. The cacheline is already warm where read in the hot path. The field is only accessed with the lru lock held. Tested-by: Anton Protopopov <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 1a8953f ] MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an audio device is requested to get specific report id, the following error may occur. [ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd [ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00 [ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device [ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology [ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001 [ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35 [ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2 [ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint [ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) Ignore HID interface. The device is working properly. Signed-off-by: Zhang Heng <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 54bae4c ] The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C) report a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor. Add these 2 devices to the HID ignore list since the sensor interface is non-functional by design and should not be exposed to userspace. Signed-off-by: Chia-Lin Kao (AceLan) <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…_GETID commit 9cf6e24 upstream. After commit 936e4d4 ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") not only the getid command is skipped, but also the de-activating of the keyboard at the end of atkbd_probe(), potentially re-introducing the problem fixed by commit be2d7e4 ("Input: atkbd - fix multi-byte scancode handling on reconnect"). Make sure multi-byte scancode handling on reconnect is still handled correctly by not skipping the atkbd_deactivate() call. Fixes: 936e4d4 ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Tested-by: Paul Menzel <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Wang Hai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…free commit 5e9388f upstream. The below commit that updated BPF_MAP_TYPE_LRU_HASH free target, also updated tools/testing/selftests/bpf/test_lru_map to match. But that missed one case that passes with 4 cores, but fails at higher cpu counts. Update test_lru_sanity3 to also adjust its expectation of target_free. This time tested with 1, 4, 16, 64 and 384 cpu count. Fixes: d4adf1c ("bpf: Adjust free target to avoid global starvation of LRU map") Signed-off-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c32b624 upstream. dfs_cache_refresh() delayed worker could race with cifs_put_tcon(), so make sure to call list_replace_init() on @tcon->dfs_ses_list after kworker is cancelled or finished. Fixes: 4f42a8b ("smb: client: fix DFS interlink failover") Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6ee9b3d84775944fb8c8a447961cd01274ac671c upstream.
find_vm_area() couldn't be called in atomic_context. If find_vm_area() is
called to reports vm area information, kasan can trigger deadlock like:
CPU0 CPU1
vmalloc();
alloc_vmap_area();
spin_lock(&vn->busy.lock)
spin_lock_bh(&some_lock);
<interrupt occurs>
<in softirq>
spin_lock(&some_lock);
<access invalid address>
kasan_report();
print_report();
print_address_description();
kasan_find_vm_area();
find_vm_area();
spin_lock(&vn->busy.lock) // deadlock!
To prevent possible deadlock while kasan reports, remove kasan_find_vm_area().
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c056a36 ("kasan: print virtual mapping info in reports")
Signed-off-by: Yeoreum Yun <[email protected]>
Reported-by: Yunseong Kim <[email protected]>
Reviewed-by: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Byungchul Park <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 50f930db22365738d9387c974416f38a06e8057e upstream. If ksmbd_iov_pin_rsp return error, use-after-free can happen by accessing opinfo->state and opinfo_put and ksmbd_fd_put could called twice. Reported-by: Ziyan Xu <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b16510a upstream. Herbert notes that DIV_ROUND_UP() may overflow unnecessarily if an ecdsa implementation's ->key_size() callback returns an unusually large value. Herbert instead suggests (for a division by 8): X / 8 + !!(X & 7) Based on this formula, introduce a generic DIV_ROUND_UP_POW2() macro and use it in lieu of DIV_ROUND_UP() for ->key_size() return values. Additionally, use the macro in ecc_digits_from_bytes(), whose "nbytes" parameter is a ->key_size() return value in some instances, or a user-specified ASN.1 length in the case of ecdsa_get_signature_rs(). Link: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Lukas Wunner <[email protected]> Signed-off-by: Lukas Wunner <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit fd881d0 upstream. The rseq_cs field is documented as being set to 0 by user-space prior to registration, however this is not currently enforced by the kernel. This can result in a segfault on return to user-space if the value stored in the rseq_cs field doesn't point to a valid struct rseq_cs. The correct solution to this would be to fail the rseq registration when the rseq_cs field is non-zero. However, some older versions of glibc will reuse the rseq area of previous threads without clearing the rseq_cs field and will also terminate the process if the rseq registration fails in a secondary thread. This wasn't caught in testing because in this case the leftover rseq_cs does point to a valid struct rseq_cs. What we can do is clear the rseq_cs field on registration when it's non-zero which will prevent segfaults on registration and won't break the glibc versions that reuse rseq areas on thread creation. Signed-off-by: Michael Jeanson <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Mathieu Desnoyers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Linus Torvalds <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected] Tested-by: Miguel Ojeda <[email protected]> Tested-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Miguel Ojeda <[email protected]> Tested-by: Harshit Mogalapalli <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Mark Brown <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Peter Schneider <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Brett A C Sheffield <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
This is the 6.6.98 stable release
This is the 6.6.99 stable release
Signed-off-by: Clark Williams <[email protected]>
…in_use()"" This reverts commit 9e1e6e6. Revert the previous revert used to work around the ptp breakage. A fix is now available in the upstream linux-stable-rt v6.6-rt branch, see commit: a8c669b ("ptp: fix breakage after ptp_vclock_in_use() rework") Link: https://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git/commit/?h=v6.6-rt&id=a8c669bbc831eec2094ed9e2054a9a0bb81a6c52 Signed-off-by: Gratian Crisan <[email protected]>
Linux 6.6.99-rt58 Signed-off-by: Gratian Crisan <[email protected]>
chaitu236
approved these changes
Aug 6, 2025
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
115 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This is a merge of the latest upstream stable-rt tag
v6.12.39-rt11.Prior to the merge commit 9e1e6e6 ("Revert "ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()"") was reverted since a fix is now available in the upstream stable-rt branch as commit a8c669b ("ptp: fix breakage after ptp_vclock_in_use() rework")
No merge conflicts.
AB#3125763
AB#3184608
Testing
Additional functional and performance testing left to the ATSes.