Releases: mi0bot/OpenHPSDR-Thetis
v2.10.3.13-beta1
This is the first beta release of v2.10.3.13 of Thetis for the HL2.
Upgraded to latest development codebase of official Thetis
NB - The legacy spot support and code has been removed as it was not being maintained as had many issues. Use a 3rd party app via TCI such as Cluster-TCI-Bridge by OE3IDE to provide spots to the spectrum
This release contains the database manager. If you have other Anan radios, this release will work with them, but you must define separate databases and select the correct database with the -dbid: option. This release creates the shortcut with -dbid:HL2. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases.
There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will not overwrite it.
No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case and ensure correct power output.
v2.10.3.12
This is the final release of v2.10.3.12 of Thetis for the HL2.
- Upgraded to allow Pure Signal at full sample rate (384K)
IMPORTANT NOTE: please follow the steps below for this version
Take backup of your DB before you uninstall the old version of Thetis, use DB manager to do this.
Uninstall the previous Thetis install(s) using Add/Remove Programs. Uninstalling via Add/Remove Programs will leave your database intact
Remove your wdspWisdom00 file from %appdata%\OpenHPSDR\Thetis-x64
Install this new version, and reboot, even if not requested to do so.
Restart this new version and wait for wisdom regenerated. This could take upwards of 5 mins, follow the on-screen instructions.
This release contains the database manager. If you have other Anan radios, this release will work with them, but you must define separate databases and select the correct database with the -dbid: option. This release creates the shortcut with -dbid:HL2. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases.
There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will not overwrite it.
No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case and ensure correct power output.
v2.10.3.11
This is the final release of v2.10.3.11 of Thetis for the HL2.
WARNING - This release requires a rebuild of the database if you are upgrading
from 2.10.3.6 or earlier.
Fixed amASIO mic gain issue
Fixed control of break at start of Tune
This release contains the database manager. If you have other Anan radios, this release will work with them, but you must define separate databases and select the correct database with the -dbid: option. This release creates the shortcut with -dbid:HL2. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases.
There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will not overwrite it.
No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case and ensure correct power output.
v2.10.3.8
This is the final release of v2.10.3.8 of Thetis for the HL2.
WARNING - This release requires a rebuild of the database if you are upgrading
from 2.10.3.6.
- Fixed Mic control issue
- Increased receiver Attenuate to full range, 32dB max attenuation
- Updated code base to latest official code
- Enabled software side-tone
- Fixed issue with lock-up with no I/O Board installed
This release contains the database manager. If you have other Anan radios, this release will work with them, but you must define separate databases and select the correct database with the -dbid: option. This release creates the shortcut with -dbid:HL2. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases.
There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will not overwrite it.
No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case.
v2.10.3.7
This is the final release of v2.10.3.7 of Thetis for the HL2.
WARNING - This release requires a rebuild of the database by using the database manager to create a new database. You may have already done this if you have been installing the beta releases, so you will be good to go.
WARNING - Uninstall previous versions of Thetis for HL2 before installing this version.
TL:DR -
Icon "Thetis-HL2" runs the HL2 version of Thetis setup for database identifier for HL2
Icon "Thetis" runs the HL2 version of Thetis without any CLI options
If the Anan version of Thetis is installed, "Thetis-x64" runs the Anan version without any CLI options
This release has an updated installer which allows both the Anan and HL2 version of Thetis to be installed. The release will create two icons. Icon "Thetis-HL2" will run Thetis with the -dbid:HL2 option, and "Thetis" will run Thetis without any options.
Note that the Anan version of Thetis creates an icon called Thetis-x64.
This release has had to update enumerations to make it compatible with the official Thetis. As these enumerations are stored in the database, it must be rebuilt by creating a new database using the database manager. The changes mainly affect the Tx profiles, and it is possible to open the old databases to inspect a configuration during the database rebuild.
This release contains the database manager. If you have other Anan radios, this release will work with them, but you must define separate databases and select the correct database with the -dbid: option. This release creates the shortcut with -dbid:HL2. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases.
There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will not overwrite it.
No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case.
v2.10.3.6
This is the final release of v2.10.3.6 of Thetis for the HL2.
WARNING
This release now contains the database manager. If you have other Anan radios, this release will work with them, but you must define separate databases and select the correct database with the -dbid: option. This release creates the shortcut with -dbid:HL2. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases.
There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will overwrite it. You might need to remove the official Thetis release or select the repair option to allow the installation to complete.
This release may require a reset of the database or holding the Ctrl key while Thetis is starting, if you get errors on startup.
No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case.
v2.10.3.5
This is the final v2.10.3.5 release of Thetis for the HL2.
WARNING
This release now contains an installer and will install in the same place as the official Thetis. If you have other Anan radios, this release will work with them, but you must define separate databases with the command line "-datapath" option. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases.
There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will overwrite it. You might need to remove the official Thetis release or select the repair option to allow the installation to complete.
This release may require a reset of the database or holding the Ctrl key while Thetis is starting, if you get errors on startup.
No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case.
v2.10.3.4
This is the final release v2.10.3.4 of Thetis for HL2.
It isn't a proper install but a zip of an install and can be placed in an different directory (I use C:\OpenHPSDR) so should allow the original release to still be used. Then just run Thetis.exe within your new directory.
If you haven't already done so, you first need to install the latest release of Thetis as it sets up things like skins and the resource files for the new meter module. The link is
https://github.com/ramdor/Thetis/releases/tag/v2.10.3.4
Please read the release instructions associated with the above release as there has been updates to the skins which will affect some controls and meters.
This release may require a reset of the database.
No warranty or guarantee, use at your own risk. It should use its own database but do a backup of your current Thetis one just in case.
v2.10.3.3
This is the final release v2.10.3.3 of Thetis for HL2.
It isn't a proper install but a zip of an install and can be placed in an different directory (I use C:\OpenHPSDR) so should allow the original release to still be used. Then just run Thetis.exe within your new directory.
If you haven't already done so, you first need to install the latest release of Thetis as it sets up things like skins and the resource files for the new meter module. The link is
https://github.com/ramdor/Thetis/releases/tag/v2.10.3.3
More details on this release can be found at
https://community.apache-labs.com/viewtopic.php?f=9&t=4870
Please read the release instructions associated with the above release as there has been updates to the skins which will affect some controls and meters.
This release may require a reset of the database.
No warranty or guarantee, use at your own risk. It should use it's own database but do a backup of your current Thetis one just in case.
v2.10.2.2
This is the formal release v2.10.2.2-HL2 of Thetis for HL2.
It isn't a proper install but a zip of an install and can be placed in an different directory (I use C:\OpenHPSDR) so should allow the original release to still be used. Then just run Thetis.exe within your new directory.
If you haven't already done so, you first need to install the latest pre-release of Thetis (x86 or x64 version) as it sets up things like skins and the resource file for the new meter module. The link is
https://github.com/ramdor/Thetis-2.9.0/releases/tag/v2.10.2.2
Please read the release instructions associated with the above release as there has been updates to the skins which will affect some controls and meters.
This release may require a reset of the database.
No warranty or guarantee, use at your own risk. It should use it's own database but do a backup of your current Thetis one just in case.