fix: go-libp2p v0.44 with self-healing UPnP port mappings

docs/changelogs/v0.39.md

@@ -12,6 +12,7 @@ This release was brought to you by the [Shipyard](https://ipshipyard.com/) team.
 - [🔦 Highlights](#-highlights)
   - [📊 Detailed statistics for Sweep provider with `ipfs provide stat`](#-detailed-statistics-for-sweep-provider-with-ipfs-provide-stat)
   - [🔔 Sweep provider slow reprovide warnings](#-sweep-provider-slow-reprovide-warnings)
+  - [🔧 Fixed UPnP port forwarding after router restarts](#-fixed-upnp-port-forwarding-after-router-restarts)
   - [🪦 Deprecated `go-ipfs` name no longer published](#-deprecated-go-ipfs-name-no-longer-published)
 - [📦️ Important dependency updates](#-important-dependency-updates)
 - [📝 Changelog](#-changelog)
@@ -74,8 +75,33 @@ a warning displays with:
 - Recommended solutions: increase `Provide.DHT.MaxWorkers` or `Provide.DHT.DedicatedPeriodicWorkers`
 - Command to monitor real-time progress: `watch ipfs provide stat --all --compact`
 
-The alert polls every 15 minutes and only triggers after sustained growth
-across multiple intervals. The legacy provider is unaffected by this change.
+The alert polls every 15 minutes (to avoid alert fatigue while catching
+persistent issues) and only triggers after sustained growth across multiple
+intervals. The legacy provider is unaffected by this change.
+
+#### 🔧 Fixed UPnP port forwarding after router restarts
+
+Kubo now automatically recovers UPnP port mappings when routers restart or
+become temporarily unavailable, fixing a critical connectivity issue that
+affected self-hosted nodes behind NAT.
+
+**Previous behavior:** When a UPnP-enabled router restarted, Kubo would lose
+its port mapping and fail to re-establish it automatically. Nodes would become
+unreachable to the network until the daemon was manually restarted, forcing
+reliance on relay connections which degraded performance.
+
+**New behavior:** The upgraded go-libp2p (v0.44.0) includes [Shipyard's fix](https://github.com/libp2p/go-libp2p/pull/3367)
+for self-healing NAT mappings that automatically rediscover and re-establish
+port forwarding after router events. Nodes now maintain public connectivity
+without manual intervention.
+
+> [!NOTE]
+> If your node runs behind a router and you haven't manually configured port
+> forwarding, make sure [`Swarm.DisableNatPortMap=false`](https://github.com/ipfs/kubo/blob/master/docs/config.md#swarmdisablenatportmap)
+> so UPnP can automatically handle port mapping (this is the default).
+
+This significantly improves reliability for desktop and self-hosted IPFS nodes
+using UPnP for NAT traversal.
 
 #### 🪦 Deprecated `go-ipfs` name no longer published
 
@@ -90,6 +116,8 @@ For Docker users, the legacy `ipfs/go-ipfs` image name now shows a deprecation n
 
 ### 📦️ Important dependency updates
 
+- update `go-libp2p` to [v0.44.0](https://github.com/libp2p/go-libp2p/releases/tag/v0.44.0) with self-healing UPnP port mappings
+- update `quic-go` to [v0.55.0](https://github.com/quic-go/quic-go/releases/tag/v0.55.0)
 - update `go-ds-pebble` to [v0.5.3](https://github.com/ipfs/go-ds-pebble/releases/tag/v0.5.3)
 
 ### 📝 Changelog

docs/config.md

@@ -1920,7 +1920,7 @@ map CIDs to your peer ID, enabling content discovery across the network.
 While designed to support multiple routing systems in the future, the current
 default configuration only supports [providing to the Amino DHT](#providedht).
 
-<!-- TODO: See the [Reprovide Sweep blog post](https://blog.ipfs.tech/2025-reprovide-sweep/) for detailed performance comparisons. -->
+<!-- TODO: See the [Reprovide Sweep blog post](https://github.com/ipshipyard/ipshipyard.com/pull/8) for detailed performance comparisons. -->
 
 ### `Provide.Enabled`
 
@@ -2026,8 +2026,8 @@ overwhelming the network with unnecessary announcements.
 **With sweep mode enabled
 ([`Provide.DHT.SweepEnabled`](#providedhtsweepenabled)):** The system spreads
 reprovide operations smoothly across this entire interval. Each keyspace region
-is reprovided at scheduled times throughout the period, ensuring announcements
-periodically happen every interval.
+is reprovided at scheduled times throughout the period, ensuring each region's
+announcements complete before records expire.
 
 **With legacy mode:** The system attempts to reprovide all CIDs as quickly as
 possible at the start of each interval. If reproviding takes longer than this

docs/examples/kubo-as-a-library/go.mod

@@ -9,7 +9,7 @@ replace github.com/ipfs/kubo => ./../../..
 require (
 	github.com/ipfs/boxo v0.35.0
 	github.com/ipfs/kubo v0.0.0-00010101000000-000000000000
-	github.com/libp2p/go-libp2p v0.43.0
+	github.com/libp2p/go-libp2p v0.44.0
 	github.com/multiformats/go-multiaddr v0.16.1
 )
 
@@ -123,7 +123,7 @@ require (
 	github.com/libp2p/go-libp2p-routing-helpers v0.7.5 // indirect
 	github.com/libp2p/go-libp2p-xor v0.1.0 // indirect
 	github.com/libp2p/go-msgio v0.3.0 // indirect
-	github.com/libp2p/go-netroute v0.2.2 // indirect
+	github.com/libp2p/go-netroute v0.3.0 // indirect
 	github.com/libp2p/go-reuseport v0.4.0 // indirect
 	github.com/libp2p/go-yamux/v5 v5.0.1 // indirect
 	github.com/libp2p/zeroconf/v2 v2.2.0 // indirect
@@ -177,7 +177,7 @@ require (
 	github.com/prometheus/common v0.66.1 // indirect
 	github.com/prometheus/procfs v0.17.0 // indirect
 	github.com/quic-go/qpack v0.5.1 // indirect
-	github.com/quic-go/quic-go v0.54.1 // indirect
+	github.com/quic-go/quic-go v0.55.0 // indirect
 	github.com/quic-go/webtransport-go v0.9.0 // indirect
 	github.com/rogpeppe/go-internal v1.14.1 // indirect
 	github.com/spaolacci/murmur3 v1.1.0 // indirect

docs/examples/kubo-as-a-library/go.sum

@@ -428,8 +428,8 @@ github.com/libp2p/go-flow-metrics v0.0.1/go.mod h1:Iv1GH0sG8DtYN3SVJ2eG221wMiNpZ
 github.com/libp2p/go-flow-metrics v0.0.3/go.mod h1:HeoSNUrOJVK1jEpDqVEiUOIXqhbnS27omG0uWU5slZs=
 github.com/libp2p/go-flow-metrics v0.3.0 h1:q31zcHUvHnwDO0SHaukewPYgwOBSxtt830uJtUx6784=
 github.com/libp2p/go-flow-metrics v0.3.0/go.mod h1:nuhlreIwEguM1IvHAew3ij7A8BMlyHQJ279ao24eZZo=
-github.com/libp2p/go-libp2p v0.43.0 h1:b2bg2cRNmY4HpLK8VHYQXLX2d3iND95OjodLFymvqXU=
-github.com/libp2p/go-libp2p v0.43.0/go.mod h1:IiSqAXDyP2sWH+J2gs43pNmB/y4FOi2XQPbsb+8qvzc=
+github.com/libp2p/go-libp2p v0.44.0 h1:5Gtt8OrF8yiXmH+Mx4+/iBeFRMK1TY3a8OrEBDEqAvs=
+github.com/libp2p/go-libp2p v0.44.0/go.mod h1:NovCojezAt4dnDd4fH048K7PKEqH0UFYYqJRjIIu8zc=
 github.com/libp2p/go-libp2p-asn-util v0.4.1 h1:xqL7++IKD9TBFMgnLPZR6/6iYhawHKHl950SO9L6n94=
 github.com/libp2p/go-libp2p-asn-util v0.4.1/go.mod h1:d/NI6XZ9qxw67b4e+NgpQexCIiFYJjErASrYW4PFDN8=
 github.com/libp2p/go-libp2p-core v0.2.4/go.mod h1:STh4fdfa5vDYr0/SzYYeqnt+E6KfEV5VxfIrm0bcI0g=
@@ -455,8 +455,8 @@ github.com/libp2p/go-libp2p-xor v0.1.0/go.mod h1:LSTM5yRnjGZbWNTA/hRwq2gGFrvRIbQ
 github.com/libp2p/go-msgio v0.0.4/go.mod h1:63lBBgOTDKQL6EWazRMCwXsEeEeK9O2Cd+0+6OOuipQ=
 github.com/libp2p/go-msgio v0.3.0 h1:mf3Z8B1xcFN314sWX+2vOTShIE0Mmn2TXn3YCUQGNj0=
 github.com/libp2p/go-msgio v0.3.0/go.mod h1:nyRM819GmVaF9LX3l03RMh10QdOroF++NBbxAb0mmDM=
-github.com/libp2p/go-netroute v0.2.2 h1:Dejd8cQ47Qx2kRABg6lPwknU7+nBnFRpko45/fFPuZ8=
-github.com/libp2p/go-netroute v0.2.2/go.mod h1:Rntq6jUAH0l9Gg17w5bFGhcC9a+vk4KNXs6s7IljKYE=
+github.com/libp2p/go-netroute v0.3.0 h1:nqPCXHmeNmgTJnktosJ/sIef9hvwYCrsLxXmfNks/oc=
+github.com/libp2p/go-netroute v0.3.0/go.mod h1:Nkd5ShYgSMS5MUKy/MU2T57xFoOKvvLR92Lic48LEyA=
 github.com/libp2p/go-openssl v0.0.3/go.mod h1:unDrJpgy3oFr+rqXsarWifmJuNnJR4chtO1HmaZjggc=
 github.com/libp2p/go-openssl v0.0.4/go.mod h1:unDrJpgy3oFr+rqXsarWifmJuNnJR4chtO1HmaZjggc=
 github.com/libp2p/go-reuseport v0.4.0 h1:nR5KU7hD0WxXCJbmw7r2rhRYruNRl2koHw8fQscQm2s=
@@ -469,6 +469,8 @@ github.com/lunixbochs/vtclean v1.0.0/go.mod h1:pHhQNgMf3btfWnGBVipUOjRYhoOsdGqdm
 github.com/magiconair/properties v1.8.0/go.mod h1:PppfXfuXeibc/6YijjN8zIbojt8czPbwD3XqdrwzmxQ=
 github.com/mailru/easyjson v0.0.0-20180823135443-60711f1a8329/go.mod h1:C1wdFJiN94OJF2b5HbByQZoLdCWB1Yqtg26g4irojpc=
 github.com/mailru/easyjson v0.0.0-20190312143242-1de009706dbe/go.mod h1:C1wdFJiN94OJF2b5HbByQZoLdCWB1Yqtg26g4irojpc=
+github.com/marcopolo/simnet v0.0.1 h1:rSMslhPz6q9IvJeFWDoMGxMIrlsbXau3NkuIXHGJxfg=
+github.com/marcopolo/simnet v0.0.1/go.mod h1:WDaQkgLAjqDUEBAOXz22+1j6wXKfGlC5sD5XWt3ddOs=
 github.com/marten-seemann/tcp v0.0.0-20210406111302-dfbc87cc63fd h1:br0buuQ854V8u83wA0rVZ8ttrq5CpaPZdvrK0LP2lOk=
 github.com/marten-seemann/tcp v0.0.0-20210406111302-dfbc87cc63fd/go.mod h1:QuCEs1Nt24+FYQEqAAncTDPJIuGs+LxK1MCiFL25pMU=
 github.com/mattn/go-colorable v0.0.9/go.mod h1:9vuHe8Xs5qXnSaW/c/ABM9alt+Vo+STaOChaDxuIBZU=
@@ -649,8 +651,8 @@ github.com/prometheus/procfs v0.17.0 h1:FuLQ+05u4ZI+SS/w9+BWEM2TXiHKsUQ9TADiRH7D
 github.com/prometheus/procfs v0.17.0/go.mod h1:oPQLaDAMRbA+u8H5Pbfq+dl3VDAvHxMUOVhe0wYB2zw=
 github.com/quic-go/qpack v0.5.1 h1:giqksBPnT/HDtZ6VhtFKgoLOWmlyo9Ei6u9PqzIMbhI=
 github.com/quic-go/qpack v0.5.1/go.mod h1:+PC4XFrEskIVkcLzpEkbLqq1uCoxPhQuvK5rH1ZgaEg=
-github.com/quic-go/quic-go v0.54.1 h1:4ZAWm0AhCb6+hE+l5Q1NAL0iRn/ZrMwqHRGQiFwj2eg=
-github.com/quic-go/quic-go v0.54.1/go.mod h1:e68ZEaCdyviluZmy44P6Iey98v/Wfz6HCjQEm+l8zTY=
+github.com/quic-go/quic-go v0.55.0 h1:zccPQIqYCXDt5NmcEabyYvOnomjs8Tlwl7tISjJh9Mk=
+github.com/quic-go/quic-go v0.55.0/go.mod h1:DR51ilwU1uE164KuWXhinFcKWGlEjzys2l8zUl5Ss1U=
 github.com/quic-go/webtransport-go v0.9.0 h1:jgys+7/wm6JarGDrW+lD/r9BGqBAmqY/ssklE09bA70=
 github.com/quic-go/webtransport-go v0.9.0/go.mod h1:4FUYIiUc75XSsF6HShcLeXXYZJ9AGwo/xh3L8M/P1ao=
 github.com/rogpeppe/go-internal v1.3.0/go.mod h1:M8bDsm7K2OlrFYOpmOWEs/qY81heoFRclV5y23lUDJ4=

docs/provide-stats.md

@@ -45,8 +45,9 @@ a batch for efficient processing.
 
 Average length of binary prefixes identifying the scheduled regions. Each
 keyspace region is identified by a binary prefix, and this shows the average
-prefix length across all regions in the schedule. Longer prefixes indicate more
-DHT servers in the swarm.
+prefix length across all regions in the schedule. Longer prefixes indicate the
+keyspace is divided into more regions (because there are more DHT servers in the
+swarm to distribute records across).
 
 ### Next region prefix
 
@@ -65,7 +66,8 @@ start timestamp.
 
 ### Current time offset
 
-Elapsed time in the current reprovide cycle, showing cycle progress.
+Elapsed time in the current reprovide cycle, showing cycle progress (e.g., '11h'
+means 11 hours into a 22-hour cycle, roughly halfway through).
 
 ### Cycle started
 
@@ -84,7 +86,8 @@ DHT servers. In practice, this is often lower than the [replication
 factor](#replication-factor) due to unreachable peers or timeouts. Matching the
 replication factor would indicate all DHT servers are reachable.
 
-Note: some holders may have gone offline since receiving the record.
+Note: this counts successful sends; some DHT servers may have gone offline
+afterward, so actual availability may be lower.
 
 ### Peers swept
 
@@ -175,14 +178,23 @@ Number of idle workers not reserved for periodic or burst tasks.
 
 ### Workers stats
 
-Breakdown of worker status by type (periodic for scheduled reprovides, burst
-for initial provides). For each: active (currently processing), dedicated
-(reserved for this type), available (idle dedicated + [free
-workers](#free-workers)), and queued (0 or 1, since we only acquire when
-needed). See [provide queue](#provide-queue) and [reprovide
-queue](#reprovide-queue) for regions waiting to be processed.
+Breakdown of worker status by type (periodic for scheduled reprovides, burst for
+initial provides). For each type:
+
+- **Active**: Currently processing operations
+- **Dedicated**: Reserved for this type
+- **Available**: Idle dedicated workers + [free workers](#free-workers)
+- **Queued**: 0 or 1 (workers acquired only when needed)
+
+See [provide queue](#provide-queue) and [reprovide queue](#reprovide-queue) for
+regions waiting to be processed.
 
 ### Max connections/worker
 
 Maximum concurrent DHT server connections per worker when sending provider
 records for a region.
+
+## See Also
+
+- [Provide configuration reference](./config.md#provide)
+- [Provide metrics for Prometheus](./metrics.md#provide)

go.mod

@@ -51,7 +51,7 @@ require (
 	github.com/jbenet/go-temp-err-catcher v0.1.0
 	github.com/julienschmidt/httprouter v1.3.0
 	github.com/libp2p/go-doh-resolver v0.5.0
-	github.com/libp2p/go-libp2p v0.43.0
+	github.com/libp2p/go-libp2p v0.44.0
 	github.com/libp2p/go-libp2p-http v0.5.0
 	github.com/libp2p/go-libp2p-kad-dht v0.35.2-0.20251017193437-abd04263daac
 	github.com/libp2p/go-libp2p-kbucket v0.8.0
@@ -170,7 +170,7 @@ require (
 	github.com/libp2p/go-libp2p-gostream v0.6.0 // indirect
 	github.com/libp2p/go-libp2p-xor v0.1.0 // indirect
 	github.com/libp2p/go-msgio v0.3.0 // indirect
-	github.com/libp2p/go-netroute v0.2.2 // indirect
+	github.com/libp2p/go-netroute v0.3.0 // indirect
 	github.com/libp2p/go-reuseport v0.4.0 // indirect
 	github.com/libp2p/go-yamux/v5 v5.0.1 // indirect
 	github.com/libp2p/zeroconf/v2 v2.2.0 // indirect
@@ -221,7 +221,7 @@ require (
 	github.com/prometheus/procfs v0.17.0 // indirect
 	github.com/prometheus/statsd_exporter v0.27.1 // indirect
 	github.com/quic-go/qpack v0.5.1 // indirect
-	github.com/quic-go/quic-go v0.54.1 // indirect
+	github.com/quic-go/quic-go v0.55.0 // indirect
 	github.com/quic-go/webtransport-go v0.9.0 // indirect
 	github.com/rivo/uniseg v0.4.4 // indirect
 	github.com/rogpeppe/go-internal v1.14.1 // indirect

go.sum

@@ -508,8 +508,8 @@ github.com/libp2p/go-flow-metrics v0.0.1/go.mod h1:Iv1GH0sG8DtYN3SVJ2eG221wMiNpZ
 github.com/libp2p/go-flow-metrics v0.0.3/go.mod h1:HeoSNUrOJVK1jEpDqVEiUOIXqhbnS27omG0uWU5slZs=
 github.com/libp2p/go-flow-metrics v0.3.0 h1:q31zcHUvHnwDO0SHaukewPYgwOBSxtt830uJtUx6784=
 github.com/libp2p/go-flow-metrics v0.3.0/go.mod h1:nuhlreIwEguM1IvHAew3ij7A8BMlyHQJ279ao24eZZo=
-github.com/libp2p/go-libp2p v0.43.0 h1:b2bg2cRNmY4HpLK8VHYQXLX2d3iND95OjodLFymvqXU=
-github.com/libp2p/go-libp2p v0.43.0/go.mod h1:IiSqAXDyP2sWH+J2gs43pNmB/y4FOi2XQPbsb+8qvzc=
+github.com/libp2p/go-libp2p v0.44.0 h1:5Gtt8OrF8yiXmH+Mx4+/iBeFRMK1TY3a8OrEBDEqAvs=
+github.com/libp2p/go-libp2p v0.44.0/go.mod h1:NovCojezAt4dnDd4fH048K7PKEqH0UFYYqJRjIIu8zc=
 github.com/libp2p/go-libp2p-asn-util v0.4.1 h1:xqL7++IKD9TBFMgnLPZR6/6iYhawHKHl950SO9L6n94=
 github.com/libp2p/go-libp2p-asn-util v0.4.1/go.mod h1:d/NI6XZ9qxw67b4e+NgpQexCIiFYJjErASrYW4PFDN8=
 github.com/libp2p/go-libp2p-core v0.2.4/go.mod h1:STh4fdfa5vDYr0/SzYYeqnt+E6KfEV5VxfIrm0bcI0g=
@@ -539,8 +539,8 @@ github.com/libp2p/go-libp2p-xor v0.1.0/go.mod h1:LSTM5yRnjGZbWNTA/hRwq2gGFrvRIbQ
 github.com/libp2p/go-msgio v0.0.4/go.mod h1:63lBBgOTDKQL6EWazRMCwXsEeEeK9O2Cd+0+6OOuipQ=
 github.com/libp2p/go-msgio v0.3.0 h1:mf3Z8B1xcFN314sWX+2vOTShIE0Mmn2TXn3YCUQGNj0=
 github.com/libp2p/go-msgio v0.3.0/go.mod h1:nyRM819GmVaF9LX3l03RMh10QdOroF++NBbxAb0mmDM=
-github.com/libp2p/go-netroute v0.2.2 h1:Dejd8cQ47Qx2kRABg6lPwknU7+nBnFRpko45/fFPuZ8=
-github.com/libp2p/go-netroute v0.2.2/go.mod h1:Rntq6jUAH0l9Gg17w5bFGhcC9a+vk4KNXs6s7IljKYE=
+github.com/libp2p/go-netroute v0.3.0 h1:nqPCXHmeNmgTJnktosJ/sIef9hvwYCrsLxXmfNks/oc=
+github.com/libp2p/go-netroute v0.3.0/go.mod h1:Nkd5ShYgSMS5MUKy/MU2T57xFoOKvvLR92Lic48LEyA=
 github.com/libp2p/go-openssl v0.0.3/go.mod h1:unDrJpgy3oFr+rqXsarWifmJuNnJR4chtO1HmaZjggc=
 github.com/libp2p/go-openssl v0.0.4/go.mod h1:unDrJpgy3oFr+rqXsarWifmJuNnJR4chtO1HmaZjggc=
 github.com/libp2p/go-reuseport v0.4.0 h1:nR5KU7hD0WxXCJbmw7r2rhRYruNRl2koHw8fQscQm2s=
@@ -555,6 +555,8 @@ github.com/lunixbochs/vtclean v1.0.0/go.mod h1:pHhQNgMf3btfWnGBVipUOjRYhoOsdGqdm
 github.com/magiconair/properties v1.8.0/go.mod h1:PppfXfuXeibc/6YijjN8zIbojt8czPbwD3XqdrwzmxQ=
 github.com/mailru/easyjson v0.0.0-20180823135443-60711f1a8329/go.mod h1:C1wdFJiN94OJF2b5HbByQZoLdCWB1Yqtg26g4irojpc=
 github.com/mailru/easyjson v0.0.0-20190312143242-1de009706dbe/go.mod h1:C1wdFJiN94OJF2b5HbByQZoLdCWB1Yqtg26g4irojpc=
+github.com/marcopolo/simnet v0.0.1 h1:rSMslhPz6q9IvJeFWDoMGxMIrlsbXau3NkuIXHGJxfg=
+github.com/marcopolo/simnet v0.0.1/go.mod h1:WDaQkgLAjqDUEBAOXz22+1j6wXKfGlC5sD5XWt3ddOs=
 github.com/marten-seemann/tcp v0.0.0-20210406111302-dfbc87cc63fd h1:br0buuQ854V8u83wA0rVZ8ttrq5CpaPZdvrK0LP2lOk=
 github.com/marten-seemann/tcp v0.0.0-20210406111302-dfbc87cc63fd/go.mod h1:QuCEs1Nt24+FYQEqAAncTDPJIuGs+LxK1MCiFL25pMU=
 github.com/mattn/go-colorable v0.0.9/go.mod h1:9vuHe8Xs5qXnSaW/c/ABM9alt+Vo+STaOChaDxuIBZU=
@@ -775,8 +777,8 @@ github.com/prometheus/statsd_exporter v0.27.1 h1:tcRJOmwlA83HPfWzosAgr2+zEN5XDFv
 github.com/prometheus/statsd_exporter v0.27.1/go.mod h1:vA6ryDfsN7py/3JApEst6nLTJboq66XsNcJGNmC88NQ=
 github.com/quic-go/qpack v0.5.1 h1:giqksBPnT/HDtZ6VhtFKgoLOWmlyo9Ei6u9PqzIMbhI=
 github.com/quic-go/qpack v0.5.1/go.mod h1:+PC4XFrEskIVkcLzpEkbLqq1uCoxPhQuvK5rH1ZgaEg=
-github.com/quic-go/quic-go v0.54.1 h1:4ZAWm0AhCb6+hE+l5Q1NAL0iRn/ZrMwqHRGQiFwj2eg=
-github.com/quic-go/quic-go v0.54.1/go.mod h1:e68ZEaCdyviluZmy44P6Iey98v/Wfz6HCjQEm+l8zTY=
+github.com/quic-go/quic-go v0.55.0 h1:zccPQIqYCXDt5NmcEabyYvOnomjs8Tlwl7tISjJh9Mk=
+github.com/quic-go/quic-go v0.55.0/go.mod h1:DR51ilwU1uE164KuWXhinFcKWGlEjzys2l8zUl5Ss1U=
 github.com/quic-go/webtransport-go v0.9.0 h1:jgys+7/wm6JarGDrW+lD/r9BGqBAmqY/ssklE09bA70=
 github.com/quic-go/webtransport-go v0.9.0/go.mod h1:4FUYIiUc75XSsF6HShcLeXXYZJ9AGwo/xh3L8M/P1ao=
 github.com/rivo/uniseg v0.2.0/go.mod h1:J6wj4VEh+S6ZtnVlnTBMWIodfgj8LQOQFoIToxlJtxc=

test/dependencies/go.mod

@@ -182,14 +182,14 @@ require (
 	github.com/libp2p/go-cidranger v1.1.0 // indirect
 	github.com/libp2p/go-doh-resolver v0.5.0 // indirect
 	github.com/libp2p/go-flow-metrics v0.3.0 // indirect
-	github.com/libp2p/go-libp2p v0.43.0 // indirect
+	github.com/libp2p/go-libp2p v0.44.0 // indirect
 	github.com/libp2p/go-libp2p-asn-util v0.4.1 // indirect
 	github.com/libp2p/go-libp2p-kad-dht v0.35.2-0.20251017193437-abd04263daac // indirect
 	github.com/libp2p/go-libp2p-kbucket v0.8.0 // indirect
 	github.com/libp2p/go-libp2p-record v0.3.1 // indirect
 	github.com/libp2p/go-libp2p-routing-helpers v0.7.5 // indirect
 	github.com/libp2p/go-msgio v0.3.0 // indirect
-	github.com/libp2p/go-netroute v0.2.2 // indirect
+	github.com/libp2p/go-netroute v0.3.0 // indirect
 	github.com/libp2p/go-reuseport v0.4.0 // indirect
 	github.com/macabu/inamedparam v0.1.3 // indirect
 	github.com/magiconair/properties v1.8.7 // indirect
@@ -258,9 +258,7 @@ require (
 	github.com/quasilyte/gogrep v0.5.0 // indirect
 	github.com/quasilyte/regex/syntax v0.0.0-20210819130434-b3f0c404a727 // indirect
 	github.com/quasilyte/stdinfo v0.0.0-20220114132959-f7386bf02567 // indirect
-	github.com/quic-go/qpack v0.5.1 // indirect
-	github.com/quic-go/quic-go v0.54.1 // indirect
-	github.com/quic-go/webtransport-go v0.9.0 // indirect
+	github.com/quic-go/quic-go v0.55.0 // indirect
 	github.com/raeperd/recvcheck v0.2.0 // indirect
 	github.com/rivo/uniseg v0.4.7 // indirect
 	github.com/rogpeppe/go-internal v1.14.1 // indirect
@@ -325,7 +323,6 @@ require (
 	go.uber.org/automaxprocs v1.6.0 // indirect
 	go.uber.org/dig v1.19.0 // indirect
 	go.uber.org/fx v1.24.0 // indirect
-	go.uber.org/mock v0.5.2 // indirect
 	go.uber.org/multierr v1.11.0 // indirect
 	go.uber.org/zap v1.27.0 // indirect
 	go.uber.org/zap/exp v0.3.0 // indirect