Skip to content

Audio Processing

= edited this page Feb 10, 2026 · 1 revision

Audio Processing

By default, transcriber passes the decoded audio straight to whisper without any extra processing. This is fine for most recordings.

For problematic audio (cheap mics, phone recordings, files with long silence padding), there are three optional processing steps you can turn on.

DC Offset Removal

Some recording devices add a constant bias to the signal (the waveform isn't centered on zero). This can confuse whisper. DC offset removal subtracts the mean sample value.

let opts = TranscribeOptions::new()
    .audio_processing(
        AudioProcessing::new()
            .dc_offset_removal(true)
    );

Peak Normalization

Scales the audio so the loudest sample hits 1.0. Useful for very quiet recordings where whisper might struggle.

let opts = TranscribeOptions::new()
    .audio_processing(
        AudioProcessing::new()
            .normalize(true)
    );

Silence Trimming

Cuts leading and trailing silence. Handy for recordings that start with a long pause or end with minutes of dead air. Keeps a small padding (50ms by default) so speech edges aren't clipped.

let opts = TranscribeOptions::new()
    .audio_processing(
        AudioProcessing::new()
            .trim_silence(true)
            .silence_threshold_db(-30.0)  // default: -40.0 dB
            .silence_pad_ms(100)          // default: 50ms
    );

All at once

// Turn everything on with defaults
let processing = AudioProcessing::all();

// Or pick and choose
let processing = AudioProcessing::new()
    .dc_offset_removal(true)
    .normalize(true)
    .trim_silence(true)
    .silence_threshold_db(-35.0);

let opts = TranscribeOptions::new()
    .audio_processing(processing);

When to use what

Problem Fix
Whisper hallucinates on quiet audio normalize(true)
Recording has a buzzy baseline dc_offset_removal(true)
5 minutes of silence at the end trim_silence(true)
Voice recorder from a cheap mic AudioProcessing::all()
Clean studio recording or YouTube Leave defaults (all off)

Clone this wiki locally