The case is designed for 3D printing
- Recomended matirial PET-G
- Recomended color GRAY, for button BLUE
| Case ESP v0.1 | Case ESP v0.2 - v0.5 | Case ESP v0.6 | Case ESP v0.7 - v0.8 | |
|---|---|---|---|---|
| input ESP v0.6 | 🔴 | 🔴 | 🟢 | 🟢 |
| input ESP v0.5 | 🔴 | 🟢 | 🔴 | 🟢 |
| input ESP v0.2 - v0.4 | 🟢 | 🟢 | 🔴 | 🔴 |
| relays boards | 🟢 | 🟢 | 🟢 | 🔴 |
| expansion board | 🟢 | 🔴 | 🔴 | 🔴 |
| 1/2 relays boards | 🔴 | 🔴 | 🔴 | 🔴 |
| Name | pcs. | Notes |
|---|---|---|
| Front | 1 | printed |
| Middle | 1 | printed |
| Bottom | 1 | printed |
| Back | 1 | printed |
| Button | 1 | printed |
| OLED Mount | 1 | printed |
| Clips | 2 | purchased Gianta DxMG-WALL CLIP |
| Bolts | 8 | purchased AN745 3x25 |