Repository navigation
Conversation
Adds blockTimestamp to the logs in response of eth_simulateV1. --------- Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
) This PR does a few things: - Sets the gh actions runner sizes for lint (s) and test (l) workflows - Runs the tests on gh actions in parallel - Skips fetching the spec tests when unnecessary (on windows in appveyor) - Removes ubuntu appveyor runner since it's essentially duplicate of the gh action workflow now The gh test seems to go down from ~35min to ~13min.
Co-authored-by: Felix Lange <fjl@twurst.com>
…32834) In both `TestSimultaneousRequests` and `TestSameRequestID`, we send two concurrent requests. The client under test is free to respond in either order, so we need to handle responses both ways. Also fixes an issue where some generated blob transactions didn't have any blobs. --------- Co-authored-by: Felix Lange <fjl@twurst.com>
Fixes issue ethereum#32793. When the pending tx subscription ends, the filter is removed from `api.filters`, but it is not terminated. There is no other way to terminate it, so the subscription will leak, and potentially block the producer side.
- Introduce a new subscription kind `transactionReceipts` to allow clients to receive transaction receipts over WebSocket as soon as they are available. - Accept optional `transactionHashes` filter to subscribe to receipts for specific transactions; an empty or omitted filter subscribes to all receipts. - Preserve the same receipt format as returned by `eth_getTransactionReceipt`. - Avoid additional HTTP polling, reducing RPC load and latency. --------- Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
…eum#32845) invalidTxMeter was counting txs, while validTxMeter was counting accounts. Better make the two comparable. --------- Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
It's a pull request based on the ethereum#32523 , implementing the structure of trienode history.
Add `SubscribeTransactionReceipts` for ethclient. This is a complement to ethereum#32697.
```
goos: darwin
goarch: amd64
pkg: github.com/ethereum/go-ethereum/core/types
cpu: VirtualApple @ 2.50GHz
│ old.txt │ new.txt │
│ sec/op │ sec/op vs base │
CreateBloom/small-createbloom-10 1.676µ ± 4% 1.646µ ± 1% -1.76% (p=0.000 n=10)
CreateBloom/large-createbloom-10 164.8µ ± 3% 164.3µ ± 0% ~ (p=0.247 n=10)
CreateBloom/small-mergebloom-10 231.60n ± 0% 68.00n ± 0% -70.64% (p=0.000 n=10)
CreateBloom/large-mergebloom-10 21.803µ ± 3% 5.107µ ± 1% -76.58% (p=0.000 n=10)
geomean 6.111µ 3.113µ -49.06%
│ old.txt │ new.txt │
│ B/op │ B/op vs base │
CreateBloom/small-createbloom-10 112.0 ± 0% 112.0 ± 0% ~ (p=1.000 n=10) ¹
CreateBloom/large-createbloom-10 10.94Ki ± 0% 10.94Ki ± 0% ~ (p=0.474 n=10)
CreateBloom/small-mergebloom-10 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=10) ¹
CreateBloom/large-mergebloom-10 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=10) ¹
geomean ² +0.00% ²
¹ all samples are equal
² summaries must be >0 to compute geomean
│ old.txt │ new.txt │
│ allocs/op │ allocs/op vs base │
CreateBloom/small-createbloom-10 6.000 ± 0% 6.000 ± 0% ~ (p=1.000 n=10) ¹
CreateBloom/large-createbloom-10 600.0 ± 0% 600.0 ± 0% ~ (p=1.000 n=10) ¹
CreateBloom/small-mergebloom-10 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=10) ¹
CreateBloom/large-mergebloom-10 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=10) ¹
geomean ² +0.00% ²
¹ all samples are equal
² summaries must be >0 to compute geomean
```
…#32894) Fix ethereum#32893. In the previous ethereum#32794, it only handles the pending tx filter, while there are also head and log filters. This PR applies the patch to all filter APIs and uses `defer` to maintain code consistency.
…2132) This PR implements the partial read functionalities in the freezer, optimizing the state history reader by resolving less data from freezer. --------- Signed-off-by: jsvisa <delweng@gmail.com> Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This speeds up LogDist by 75% using 64-bit operations instead of byte-wise XOR. --------- Co-authored-by: Felix Lange <fjl@twurst.com>
This speeds up DistCmp by 75% through using 64-bit operations instead of byte-wise XOR.
This PR move the queue out of the main transaction pool. For now there should be no functional changes. I see this as a first step to refactor the legacypool and make the queue a fully separate concept from the main pending pool. --------- Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com> Co-authored-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This PR adds a `filterfuzz` subcommand to the workload tester that generates requests similarly to `filtergen` (though with a much smaller block length limit) and also verifies the results by retrieving all block receipts in the range and locally filtering out relevant results. Unlike `filtergen` that operates on the finalized chain range only, `filterfuzz` does check the head region, actually it seeds a new query at every new chain head.
This ensures the node is ready to accept other nodes into the table before it is used in a test. Closes ethereum#32863
The limit check for `MaxUint32` is done after the cast to `int`. On 64 bits machines, that will work without a problem. On 32 bits machines, that will always fail. The compiler catches it and refuses to build. Note that this only fixes the compiler build. ~~If the limit is above `MaxInt32` but strictly below `MaxUint32` then this will fail at runtime and we have another issue.~~ I checked and this should not happen during regular execution, although it might happen in tests.
…2900) This happens normally after a restart, so it is better to use Info level here. Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com>
This pr addresses a few issues brought by the ethereum#32270 - Add updates to pricedList after dropping transactions. - Remove redundant deletions in queue.evictList, since pool.removeTx(hash, true, true) already performs the removal. - Prevent duplicate addresses during promotion when Reset is not nil.
…oceeding with transfer (ethereum#32374) remove todo
…thereum#32849) This adds a temporary conversion path for blob transactions with legacy proof sidecar. This feature will activate after Fusaka. We will phase this out when the fork has sufficiently settled and client side libraries have been upgraded to send the new proofs.
This adds two new CI targets. One is for building all supported keeper executables, the other is for running unit tests on 32-bit Linux. --------- Co-authored-by: Felix Lange <fjl@twurst.com>
Clean the previous resource (v4) if the latter (v5) failed.
This pull request updates `PrettyAge.String` so that the age formatter now treats exact unit boundaries (like a full day or week) as that unit instead of spilling into smaller components, keeping duration output aligned with human expectations.
workflows: update docker registry to ghcr.io/berachain/bera-geth-internal
* Update release workflow for internal repository Signed-off-by: chuck-bear <156690865+chuck-bear@users.noreply.github.com> * nit --------- Signed-off-by: chuck-bear <156690865+chuck-bear@users.noreply.github.com> Co-authored-by: Cal Bera <calbera@berachain.com>
Sets the fusaka, bpo1, bpo2 timestamps for mainnet see: https://notes.ethereum.org/@bbusa/fusaka-bpo-timeline
We unfortunately missed this update for the Geth v1.16.6 release, but it is critical.
* miner,core: update prague3 state processing * keep prague3 checks in block_validator * apply tx cleanup
* core,miner: clean prague3 code flow to fix linter and UTs * nit: fix mispell * fix broken UT by using nil PostState in receipt
calbera
force-pushed
the
latest-master-update2
branch
from
November 5, 2025 15:28
e3ca846 to
9023d71
Compare
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.