arduino · jcarolinares · May 31, 2024 · May 31, 2024
diff --git a/...ions-and-kits/portenta-machine-control/tutorials/pmc-opta-modbus-tcp/content.md b/...ions-and-kits/portenta-machine-control/tutorials/pmc-opta-modbus-tcp/content.md
@@ -42,8 +42,9 @@ If you prefer to follow the tutorial in a written format, or need to review the
 - Ethernet cables (x2)
 - Wired internet access
 - 24 VDC/0.5 A power supply (x2)
+
 ### Software
-- The [Arduino PLC IDE](https://www.arduino.cc/pro/software-plc-ide) (including Arduino PLC IDE Tools)
+- The [Arduino PLC IDE](https://www.arduino.cc/pro/software-plc-ide)
 - [Portenta Machine Control - PLC IDE Activation](https://store-usa.arduino.cc/products/plc-key-portenta-machine-control?queryID=undefined&selectedStore=us)
 
 ## Instructions 

diff --git a/...tions-and-kits/portenta-machine-control/tutorials/pmc-opta-temp-ctrl/content.md b/...tions-and-kits/portenta-machine-control/tutorials/pmc-opta-temp-ctrl/content.md
@@ -50,16 +50,16 @@ Opta™ PLC with RS-485 support: [Opta™ RS485](https://store.arduino.cc/produc
 
 ### Software Requirements
 
-- The [Arduino PLC IDE](https://www.arduino.cc/pro/software-plc-ide) (including Arduino PLC IDE Tools)
+- The [Arduino PLC IDE](https://www.arduino.cc/pro/software-plc-ide)
 - [Portenta Machine Control - PLC IDE Activation](https://docs.arduino.cc/tutorials/portenta-machine-control/plc-ide-setup-license)
 - [Opta™ - Set up with PLC IDE](https://docs.arduino.cc/tutorials/portenta-machine-control/plc-ide-setup-license#7-license-activation-with-pre-licensed-products-opta)
 - You can directly download the Arduino [PLC IDE Projects](assets/pmc-opta-temp-ctrl.zip) and extract them in your workspace
 
-***It is recommendable to read ["Connect RTD/Thermocouple to the Portenta Machine Control"](https://docs.arduino.cc/tutorials/portenta-machine-control/rtd-thermocouple-pmc) tutorial before continuing present tutorial.***
+***It is recommended to read ["Connect RTD/Thermocouple to the Portenta Machine Control"](https://docs.arduino.cc/tutorials/portenta-machine-control/rtd-thermocouple-pmc) tutorial before continuing to follow the present tutorial.***
 
 ## Temperature Sensor
 
-In this tutorial, a **Two-wire PT100 RTD** is used, but you can also use a Three-wire RTD or a thermocouple depending on your requirements or preferences. You can learn more about the differences between these temperature sensors and how to connect them to the Portenta Machine Control following the [previously mentioned tutorial](https://docs.arduino.cc/tutorials/portenta-machine-control/rtd-thermocouple-pmc). It is recommendable to read [this tutorial](https://docs.arduino.cc/tutorials/portenta-machine-control/rtd-thermocouple-pmc) to learn the basics about the temperature sensors introduced earlier.
+In this tutorial, a **Two-wire PT100 RTD** is used, but you can also use a Three-wire RTD or a thermocouple depending on your requirements or preferences. You can learn more about the differences between these temperature sensors and how to connect them to the Portenta Machine Control following the [previously mentioned tutorial](https://docs.arduino.cc/tutorials/portenta-machine-control/rtd-thermocouple-pmc). It is recommended to read [this tutorial](https://docs.arduino.cc/tutorials/portenta-machine-control/rtd-thermocouple-pmc) to learn the basics about the temperature sensors introduced earlier.
 
 ## Connections
 

diff --git a/...ons-and-kits/portenta-machine-control/tutorials/rtd-thermocouple-pmc/content.md b/...ons-and-kits/portenta-machine-control/tutorials/rtd-thermocouple-pmc/content.md
@@ -50,7 +50,7 @@ The goals of this tutorial are:
 
 ### Software Requirements
 
-- The [Arduino PLC IDE](https://www.arduino.cc/pro/software-plc-ide) (Including Arduino PLC IDE Tools)
+- The [Arduino PLC IDE](https://www.arduino.cc/pro/software-plc-ide)
 - If you have not done so, set up and activate the Portenta Machine Control license following the steps of [this tutorial](https://docs.arduino.cc/tutorials/portenta-machine-control/plc-ide-setup-license)
 
 ## Temperature Sensors

diff --git a/content/hardware/07.opta/opta-family/opta/tutorials/01.user-manual/content.md b/content/hardware/07.opta/opta-family/opta/tutorials/01.user-manual/content.md
@@ -35,7 +35,6 @@ This user manual will provide a comprehensive overview of Opta™, covering its
 
 - [Arduino IDE 2.0+](https://www.arduino.cc/en/software) or [Arduino Web Editor](https://create.arduino.cc/editor)
 - [Arduino PLC IDE 1.0.3+](https://www.arduino.cc/en/software) (for IEC 61131-3 PLC programming languages)
-- [Arduino PLC IDE 1.0.3+ Tools](https://www.arduino.cc/en/software#arduino-plc-ide) 
 
 ***To learn more about the PLC IDE, check out our tutorials [here](https://docs.arduino.cc/software/plc-ide).***
 

diff --git a/...rdware/07.opta/opta-family/opta/tutorials/10.opta-modbus-tcp-plc-ide/content.md b/...rdware/07.opta/opta-family/opta/tutorials/10.opta-modbus-tcp-plc-ide/content.md
@@ -40,7 +40,6 @@ In this tutorial, you will learn how to implement Modbus TCP based communication
 
 ### Software Requirements
 
-- [Arduino PLC IDE Tools](https://www.arduino.cc/en/software#arduino-plc-ide)
 - [Arduino PLC IDE software](https://www.arduino.cc/en/software#arduino-plc-ide)
 - If you have an Opta™, you do not need any license key to activate your product. Go to section [__License Activation With Pre-Licensed Products (Opta™)__](https://docs.arduino.cc/software/plc-ide/tutorials/plc-ide-setup-license#7-license-activation-with-pre-licensed-products-opta) to know more.
 - [Opta™ Modbus TCP PLC IDE Project Example File](assets/ModbusTCP_Opta_Example.zip)
@@ -93,14 +92,11 @@ Having provided an overview of the entire process, we can now delve into the spe
 
 Access the Arduino PLC IDE software by following [Arduino PLC IDE official website](https://www.arduino.cc/pro/software-plc-ide). You will have to download two executable files for proper software installation:
 
-- [Arduino PLC IDE Tools](https://www.arduino.cc/en/software#arduino-plc-ide)
 - [Arduino PLC IDE](https://www.arduino.cc/en/software#arduino-plc-ide)
 
 ![Arduino PLC IDE Software Download Section](assets/plcide_software_download.svg)
 
-The **Arduino PLC IDE Tools** will provide all the required drivers, libraries, and cores for development while the **Arduino PLC IDE** will install the IDE software.
-
-Install the Arduino PLC IDE Tools before the Arduino PLC IDE to avoid potential problems related to old libraries and drivers.
+The installation wizard will provide all the required drivers, libraries, and cores for development and install the **Arduino PLC IDE**.
 
 ***For more details regarding Arduino PLC IDE setup, please take a look at [Arduino PLC IDE Setup and Board's License Activation](https://docs.arduino.cc/tutorials/portenta-machine-control/plc-ide-setup-license) tutorial.***
 

diff --git a/content/software/plc-ide/tutorials/plc-ide-cloud-support/content.md b/content/software/plc-ide/tutorials/plc-ide-cloud-support/content.md
@@ -35,16 +35,15 @@ In this comprehensive tutorial, you will learn how to integrate and utilize the
 
 ### Software Requirements
 
-- [Arduino PLC IDE Tools](https://www.arduino.cc/en/software#arduino-plc-ide)
 - [Arduino PLC IDE software](https://www.arduino.cc/en/software#arduino-plc-ide)
 - If you have an Opta™, you do not need any license key to activate your product. Go to section [__License Activation With Pre-Licensed Products (Opta™)__](https://docs.arduino.cc/software/plc-ide/tutorials/plc-ide-setup-license#7-license-activation-with-pre-licensed-products-opta) to know more.
 - The [Arduino Cloud](https://cloud.arduino.cc/) will be required to perform remote actuation and status monitoring via Wi-Fi® connectivity using the sketch provided in the following section. In case you do not have an account, you can create one for free inside [cloud.arduino.cc](https://cloud.arduino.cc/home/?get-started=true).
 
 - To ensure optimal Wi-Fi® connectivity on Opta™, please use the `WiFiFirmwareUpdater` to update with the latest network firmware version. This can be done by going to `Examples -> STM32H747_System -> WiFiFirmwareUpdater` on Arduino IDE 2.X. Additionally, please ensure that you have the latest __Arduino Mbed OS Opta Boards__ version, which can be checked under `Boards Manager`.
 - [PLC IDE & Arduino Cloud integration example project](assets/Opta_PLCIDE_Cloud.zip) file compatible with Opta™
 
-***This tutorial requires the latest versions of the PLC IDE & PLC IDE Tools ( >= v 1.0.4 ). 
-You can get the latest versions [here](https://www.arduino.cc/en/software#arduino-plc-ide) for the latest PLC IDE and its tools. If it is your first time using the Arduino PLC IDE, we highly recommend you to begin with [Arduino PLC IDE Setup & Device License Activation](https://docs.arduino.cc/software/plc-ide/tutorials/plc-ide-setup-license).***
+***This tutorial requires the latest versions of the PLC IDE ( >= v 1.0.4 ). 
+You can get the latest versions [here](https://www.arduino.cc/en/software#arduino-plc-ide) for the latest PLC IDE. If it is your first time using the Arduino PLC IDE, we highly recommend you to begin with [Arduino PLC IDE Setup & Device License Activation](https://docs.arduino.cc/software/plc-ide/tutorials/plc-ide-setup-license).***
 
 ## PLC IDE & Arduino Cloud Integration
 
@@ -199,7 +198,7 @@ Save this example template for later. We will now proceed with a demonstrative e
 
 ### Setting Up the PLC IDE
 
-***Before continuing with the PLC IDE configuration with Opta™, please remember to have the latest PLC IDE with its corresponding tools stated within [Software Requirements](#software-requirements).***
+***Before continuing with the PLC IDE configuration with Opta™, please remember to have the latest PLC IDE and [Software Requirements](#software-requirements).***
 
 The PLC IDE configuration will play an important role in establishing successful communication with the Arduino Cloud. It will require setting onboard features and the communication protocol for Opta™ as usual. However, a proper 'Shared variables' setting will define the communication outcome with the Arduino Cloud.
 

diff --git a/content/software/plc-ide/tutorials/plc-ide-setup-license/content.md b/content/software/plc-ide/tutorials/plc-ide-setup-license/content.md
@@ -52,7 +52,7 @@ The following accessories are needed:
 - If you have an [Opta™](https://store-usa.arduino.cc/collections/opta-family), you do not need any license key to activate your product. Go to section [__License Activation With Pre-Licensed Products (Opta™)__](#6-license-activation-with-pre-licensed-products-opta™) to know more.
 - [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2](https://www.arduino.cc/en/software), [Arduino Web Editor](https://create.arduino.cc/editor) or any program with a serial monitor in case you need to retrieve the _Hardware-ID_ of your device.
 
-***To get the Arduino PLC IDE and the PLC IDE License for your device, please visit the [Arduino software page](https://www.arduino.cc/en/software) and the [store page](https://store.arduino.cc/plc-key-portenta-machine-control).***
+***To get the Arduino PLC IDE for your device, please visit the [Arduino software page](https://www.arduino.cc/en/software). In case you are using a Portenta Machine Control, you need to acquire a PLC IDE License at the [store page](https://store.arduino.cc/plc-key-portenta-machine-control).***
 
 ## Instructions