Arduino-nRF24L01+

A library for using the nRF24L01+ with Arduino.

You can find the C version for AVR chips here: https://github.com/antoineleclair/avr-nrf24l01.

Connections

You should connect the SPI pins of the nRF24L01+ to the Arduino according to the Arduino docs. For example, for the Arduino Uno (see http://arduino.cc/en/Main/arduinoBoardUno):

MOSI: 11
MISO: 12
SCK: 13

Since the Arduino is used as the master device, the slave select is arbitrary. In the examples, the other pins are connected this way:

Slave Select: 7
Chip Enable: 8
Interrupt: 2

When using the Arduino Uno, you must connect the interrupt pin to either the pin 2 or 3.

How to use

Clone the repository somewhere in your home folder, then make a symlink of the source folder in arduino libraries folder. For example, in Ubuntu 13.04:

git clone [email protected]:antoineleclair/arduino-nrf24l01.git
sudo ln -s arduino-nrf24l01/src /usr/share/arduino/libraries/nrf24l01