:Vfix

Go here for autoload + popup version

A crude and simple script for Vim to resolve some of the error :messages yielded when vim-scrips fail.

Can be a help to find where errors originate etc.

• For Vim >= 8.1.0362
• For Nvim >= 0.4.0 (#a2e48b556b7537acd26353b6cc201410be7cf3dc)

---

Latest

• Autoload and Popup preview This is currently on a different branch; autoload
• Added marks

---

ℹ️   About

Parses :messages and resolves numeric and other references to errors before adding them to QuickFix list.

💲   Example

As in gif above.

Error detected while processing function 346[5]..345[31]..340:
line   3:
E492: Not and editor command: ^I^I^Iautocmdx

Pushed by Vfix to QuickFix as:

1  .vim/some/dir/script.vim|460 error 492| fun! s:MyScript.set_au(): Not an editor command:   autocmdx
2  .vim/some/dir/script.vim|564 info| Called by: fun! s:MyScript.go_active(a, b)
3  .vim/some/dir/script.vim|594 info| Called by: fun! s:MyScript.interpret_cmd(...)

Here we have on line 1. in QuickFix the offending line 460 by function 340 resolved to s:MyScript.set_au().

Line 2. and 3. are the trace from 345 to 346. The entries in the QuickFix list are direct links to the scripts and their error lines - as long as they can be found.

💾   Install

Put script in a autoload folder or source it manually.

📟:   Commands

Adds one command: :Vfix

📚   Usage

The script comes with a few options. When Vfix has been sourced you can run:

:Vfix help

to get a list:

Options:
  a  : append    - Append to QuickFix List. Default OFF:replace
  r  : reverse   - Reverse messages.        Default OFF:FIFO
  o  : copen     - Open using copen.        Default OFF:cw
  s  : silent    - Do not open window.      Default OFF
 ig  : nolost    - Ignore lost functions.   Default OFF
 au  : autorun   - Vfix on sourcing a file. Default OFF
 ac  : clear     - Alway clear ":messages". Default OFF
 fm  : use-mark  - Only from last mark.     Default ON
  m  : use-mark  - Search mark.
 am  : auto-mark - Add marks in :messages.  Default ON
  M  : mark-now  - Add a mark in :messages.
 lm  : list-m    - List marks
 cc  : clear     - Clear messages once.
 sf  : Print Status for flags.
  h  : This help

Beware that cc and ac erase :messages. To view status of flags use :Vfix sf

:Vfix alone runs the script and open QuickFix if it managed to dechipher any errors - optionally with cc, a, s, o or r option(s).

🔍   Lost functions

Note that every time a script get sourced it get a new reference. If this is a numeric ref. it can not be resolved later and one will get N/A + a noop address in the errors list. Activate ig to silence these.

Update: With marks this is now better handled. Use marks and all old messages are ignored.

🌎   Global options

Override on options can be set in .vimrc (or elsewhere). All takes 1 for on and 0 for off.

" Option        Default
g:Vfix_append         0 " Append to QuickFix error list. Else replace.
g:Vfix_copen          0 " Use copen. Else cwindow.
g:Vfix_silent         0 " Never open window.
g:Vfix_reverse        0 " Reverse messages / errors LIFO. Main reson for this is
                        " when one have a lot of `:messages`. Would perhaps be
                        " better to jump to end of error list.
g:Vfix_ignore_lost    0 " Ignore errors where functions can not be resolved. See
                        " note below.
g:Vfix_clr_always     0 " Clear :messages each time Vfix is executed
g:Vfix_auto_run       0 " Auto run on sourcing. Can be buggy.

g:Vfix_filter_mark    1 " Only parse messages from last mark
g:Vfix_auto_mark      1 " Add mark in :messages each time a script is sourced
g:Vfix_hi_mark  Comment " Highlighting group to use for marks in messages


g:Vfix_load_on_startup    0 " The boot() section of the code will be run first
                            " time :Vfix is called. Set this to 1 to boot()
			    " when vim source the script. Mainly for hacking.
g:Vfix_re_source_globals  0 " Mainly for hacking ***this*** script.
                            " If set and true global options will be reset when
			    " re-sourcing script.

📰   News

Marks in :messages and new default values.

Added support for marks in messages. It makes, I hope, for a cleaner experience.

By this the default reversing of messages is also turned off.

Works in short like this:

1. Pre Sourcing: echo a persistent message (mark) to :messages
2. On run: Search for last mark and ignore all messages before it

Note! Marks are not auto added if path is */autoload/*. Yes, this can be somewhat inconvenient - but as we hook to SourcePre we risk adding marks on places where we do not want them ... Could try to find a better solution for this.

• Auto marking + filtering from last mark is on by default.
• All marks has a prefix of ;; VfixM NN HH:MM:SS <file|text> where NN is an internal counter.
• Add marks manually by :Vfix M <optional text>
• Filter using earlier marks by :Vfix m NR..
• Show all by uing :Vfix m 0 , or turn mark filtering off :Vfix fm=0
• List marks by: :Vfix lm
• Set marks highlighting by g:Vfix_hi_mark, default "Comment"

📣   Notes

• Support for Neovim (and older versions then 8.2)
• Add option to use shell command to read script files. Each time we read a file, even though it is with readfile(), the file is pushed to the hidden buflist. This can be a bit noisy. Files are added when updating Quickfix so this is not an option.
• Consider jumping to end of error list instead of reversing.
• Sorting is a mess when one have mixed messages: One can typically have an error reference in :messages followed by one or more error messages. This script is greedy when reading errors after an error with reported location - resulting in a skewed reporting when it comes to called by references. So - w ork on this.
• Better autocommand handling.
• More specific about that -^ point so it is actually possible to check off. :sweat_smile:
• It is possible to cache references to all objects and functions each time a script is sourced by looping s:, g: etc. Could have it as an option, but likely best suited as an addon. Is a bit complex and usually not worth it.
• Find a way to set a a mark in :messages if user reloads a script they are working on. Could likely use autocommand in combination with :silent echom This way one could ignore lost messages better.
• As we read the files where errors originated and also get context - a few lines before / after - one could try to implement a way to show this. Popup? For example a popup while navigating QuickFix list. Could be useful for when one do not want to open the file - or the file is open in another vim session.
• Look up error number in :help? Each :message is prepended with an error in the form of ENNN. Could add a link to this, - but have not found it useful.
• Add a plain-text README?
• This README started partially as a joke. Clean it up.

➰   History

Is a snip that has been in my .vim directory for years, adding a little now and then. Likely a lot of bugs, ironically enough. Did some cleanup on the code and have likely introduced a few more. But put it out there in case anyone find it helpful.