Scale Reader Service

A .NET 8.0 cross-platform service that reads weight data from industrial scales via IP (SMA 8.1.2 protocol, Mettler Toledo Shared Data, or custom) and posts readings to web applications via SignalR.

How It Works

1. The service connects to the BasicWeigh web app via SignalR
2. It polls one or more scales via TCP/IP at a configurable interval (default 750ms)
3. Weight readings are parsed using the SMA 8.1.2 standard and broadcast to all web clients in real-time
4. Supports automatic reconnection with exponential backoff on connection loss
5. Scales are configured via the built-in Swagger API and persisted to a local SQLite database

Features

• SMA 8.1.2 Protocol — full parsing of status, range, gross/net, motion, weight, and units
• Multi-scale support — poll multiple scales simultaneously from one service instance
• SignalR — real-time weight data broadcast to web applications
• Swagger API — REST API for configuration, diagnostics, and scale management
• SQLite persistence — scale and service settings stored locally
• Cross-platform — runs on Windows, Linux, Raspberry Pi
• Forever retry — never gives up on SignalR or scale connections
• Zero command — send zero commands to scales via SignalR
• Diagnostic endpoint — view raw SMA responses for troubleshooting

Supported Protocols

Protocol	Description
SMA 8.1.2 (Generic)	Standard SMA weight request/response over TCP. Supports Weigh-Tronix ZM-301 and compatible indicators.
Mettler Toledo Shared Data	Mettler Toledo Shared Data Services protocol via IP.
Custom	Any TCP-based scale protocol with configurable request/response parsing.

Scale protocol definitions can be loaded from the device-definitions repo.

Installation

Quick Install (Linux / Raspberry Pi)

SSH into the target machine and run one of:

git clone https://github.com/GTMichelli-Dev/scale-reader-service.git /tmp/srs

# Production: web app reachable as a public URL (port 80 or 443)
bash /tmp/srs/deploy/install.sh https://basicscale.scaledata.net

# LAN-only Pi: web app listening on port 80 on the same Pi
bash /tmp/srs/deploy/install.sh http://localhost

# Local dev: web app launched with `dotnet run` (port 5110)
bash /tmp/srs/deploy/install.sh http://localhost:5110

rm -rf /tmp/srs

The web-server URL must match the actual listen port of the web app. The LAN-only Pi deploy binds Kestrel directly to port 80 — so the right URL is http://localhost, not http://localhost:5110 (that one is the dev default and only applies when the web app is launched via dotnet run). A wrong URL puts the service into an endless "Connection refused" reconnect loop:

sudo journalctl -u scale-reader-service -n 20 --no-pager | grep -E 'Connect|refused'

With options:

git clone https://github.com/GTMichelli-Dev/scale-reader-service.git /tmp/srs
bash /tmp/srs/deploy/install.sh https://basicscale.scaledata.net \
    --service-id plant-1 --port 5220
rm -rf /tmp/srs

For private repos, git will prompt for credentials. You can also use a deploy key or GitHub token.

Options:

Option	Default	Description
--service-id <id>	default	Unique ID for this service instance
--port <port>	5220	Swagger API port
--branch <branch>	master	Git branch to install
--install-dir <path>	/opt/scale-reader-service	Install location

The install script will:

1. Detect system architecture (ARM64, ARM, x64)
2. Install .NET 8 SDK and runtime permanently (skips download on future updates)
3. Clone and build the service from GitHub
4. Configure the web server URL
5. Set up a systemd service that starts on boot
6. Preserve existing database on updates

Prerequisites: Just internet access and git. No .NET needed — the script installs everything. The .NET SDK is installed permanently so future updates skip the download.

Updating an Existing Install (Linux / Raspberry Pi)

install.sh is idempotent — re-running it on a machine that already has the service installed will:

1. Stop the running service (systemctl stop scale-reader-service).
2. Back up scalereaderservice.db (your scale configs and runtime settings).
3. Pull the latest master from GitHub.
4. Rebuild the binary for the local architecture.
5. Restore the database.
6. Reload + start the systemd unit.

So updating to the newest release is one block of commands on the Pi:

git clone https://github.com/GTMichelli-Dev/scale-reader-service.git /tmp/srs
bash /tmp/srs/deploy/install.sh http://localhost
rm -rf /tmp/srs

(Pass whatever web URL you originally used. http://localhost works when the BasicWeigh web app is on the same Pi listening on port 80; https://yourdomain for a cloud-hosted web app.)

Watch the upgrade live, optional but recommended:

# In one terminal — leave this running while you run install.sh in another
sudo journalctl -u scale-reader-service -f --no-pager

You should see the new version banner come through:

============================================
  Scale Reader Service v1.2.6
  Swagger: http://0.0.0.0:5220/swagger
============================================

Confirm the new version is what's actually running:

sudo journalctl -u scale-reader-service -n 100 --no-pager | grep "Scale Reader Service v" | tail -1

That line should match the <Version> in ScaleReaderService.csproj. If it shows an older version, the rebuild step was skipped (rare — usually a stale cache); force a clean and re-run:

sudo systemctl stop scale-reader-service
sudo rm -rf /opt/scale-reader-service/bin /opt/scale-reader-service/obj 2>/dev/null
bash /tmp/srs/deploy/install.sh http://localhost

Confirm the service connected to the web hub (so the Scale Management page can see it):

sudo journalctl -u scale-reader-service -n 30 --no-pager | grep -E 'Connect|refused' | tail -5

You want to see Connected to http://.../scaleHub with no follow-up Connection refused. If you see Connection refused, the ServerUrl in the service's settings table doesn't match the web app's actual listen port — see the next section for fixing that without re-running install.sh.

The database is preserved across reinstalls — scale configs, retained tares, BrandsUrl, ServerUrl, and ServiceId all survive. Only the binary is replaced. To start from a clean DB, stop the service and delete /opt/scale-reader-service/scalereaderservice.db before running install.sh.

Run as console app (Windows or Linux)

cd ScaleReaderService
dotnet run

Install as Windows Service

dotnet publish -c Release -o C:\Services\ScaleReaderService
sc create "ScaleReaderService" binPath="C:\Services\ScaleReaderService\ScaleReaderService.exe"
sc start ScaleReaderService

Configuration

All configuration is done via the Swagger API at http://<your-ip>:<port>/swagger.

Service Settings (GET/PUT /api/settings)

Setting	Description
serviceId	Unique ID for this service instance (used by the web app to identify it)
serverUrl	BasicWeigh web server URL (e.g., https://basicscale.scaledata.net)
signalRHub	SignalR hub path (default: /scaleHub)
brandsUrl	URL to remote scale-models.json for protocol definitions
brandsToken	GitHub token for private repos (optional)

Scale Configuration (CRUD /api/scales)

Field	Description
scaleId	Unique ID (e.g., scale-1)
displayName	Human-readable name
protocol	SMA, MettlerToledo, or Custom
ipAddress	Scale IP address
port	Scale TCP port (default: 10001)
requestCommand	Command sent to request weight (default: W\r\n)
pollingIntervalMs	Poll frequency in milliseconds (default: 750)
timeoutMs	Socket timeout (default: 1000)

Diagnostic Endpoints

Endpoint	Description
GET /api/status/health	Service health check with scale count
GET /api/status/weight	Current weight readings from all scales
GET /api/status/weight/{scaleId}	Weight reading from a specific scale
GET /api/status/diagnostic/{scaleId}	Raw SMA response for troubleshooting

Service Management (Linux)

# Check status
sudo systemctl status scale-reader-service

# Restart
sudo systemctl restart scale-reader-service

# View logs
sudo journalctl -u scale-reader-service -f

# Stop
sudo systemctl stop scale-reader-service

Service Management (Windows)

# Start/stop
sc start ScaleReaderService
sc stop ScaleReaderService

# View in Services app
services.msc

Requirements

• .NET 8.0 Runtime (installed automatically on Linux via deploy script)
• Network access to the scale(s) and the BasicWeigh web application
• TCP connectivity to scale indicators (typically port 10001)