Skip to content

Commit e490931

Browse files
ck-telecomck-telecom
committed
drivers: input: add ft6146 driver
add initial driver for ft6146 Signed-off-by: Qingsong Gou <[email protected]>
1 parent a3aa513 commit e490931

File tree

6 files changed

+296
-0
lines changed

6 files changed

+296
-0
lines changed

‎drivers/input/CMakeLists.txt‎

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -15,6 +15,7 @@ zephyr_library_sources_ifdef(CONFIG_INPUT_CST816S input_cst816s.c)
1515
zephyr_library_sources_ifdef(CONFIG_INPUT_CY8CMBR3XXX input_cy8cmbr3xxx.c)
1616
zephyr_library_sources_ifdef(CONFIG_INPUT_ESP32_TOUCH_SENSOR input_esp32_touch_sensor.c)
1717
zephyr_library_sources_ifdef(CONFIG_INPUT_FT5336 input_ft5336.c)
18+
zephyr_library_sources_ifdef(CONFIG_INPUT_FT6146 input_ft6146.c)
1819
zephyr_library_sources_ifdef(CONFIG_INPUT_GPIO_KBD_MATRIX input_gpio_kbd_matrix.c)
1920
zephyr_library_sources_ifdef(CONFIG_INPUT_GPIO_KEYS input_gpio_keys.c)
2021
zephyr_library_sources_ifdef(CONFIG_INPUT_GPIO_QDEC input_gpio_qdec.c)

‎drivers/input/Kconfig‎

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -17,6 +17,7 @@ source "drivers/input/Kconfig.cy8cmbr3xxx"
1717
source "drivers/input/Kconfig.esp32"
1818
source "drivers/input/Kconfig.evdev"
1919
source "drivers/input/Kconfig.ft5336"
20+
source "drivers/input/Kconfig.ft6146"
2021
source "drivers/input/Kconfig.gpio_kbd_matrix"
2122
source "drivers/input/Kconfig.gpio_keys"
2223
source "drivers/input/Kconfig.gpio_qdec"

‎drivers/input/Kconfig.ft6146‎

Lines changed: 28 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,28 @@
1+
# Copyright (c) 2025 Qingsong Gou <[email protected]>
2+
# SPDX-License-Identifier: Apache-2.0
3+
4+
menuconfig INPUT_FT6146
5+
bool "FT6146 touch controller"
6+
default y
7+
depends on DT_HAS_FOCALTECH_FT6146_ENABLED
8+
select I2C
9+
select INPUT_TOUCH
10+
help
11+
Enable driver for FT6146 capacitive touch controller.
12+
13+
if INPUT_FT6146
14+
15+
config INPUT_FT6416_PERIOD
16+
int "Sample period"
17+
depends on !INPUT_FT6146_INTERRUPT
18+
default 10
19+
help
20+
Sample period in milliseconds when in polling mode.
21+
22+
config INPUT_FT6146_INTERRUPT
23+
bool "FT6146 interrupt support"
24+
default y if $(dt_compat_any_has_prop,$(DT_COMPAT_FOCALTECH_FT6146),int-gpios)
25+
help
26+
Enable interrupt support for the FT6146 touch controller.
27+
28+
endif # INPUT_FT6146

‎drivers/input/input_ft6146.c‎

Lines changed: 236 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,236 @@
1+
/*
2+
* Copyright (c) 2025 Qingsong Gou <[email protected]>
3+
*
4+
* SPDX-License-Identifier: Apache-2.0
5+
*/
6+
#define DT_DRV_COMPAT focaltech_ft6146
7+
8+
#include <zephyr/kernel.h>
9+
#include <zephyr/drivers/i2c.h>
10+
#include <zephyr/drivers/gpio.h>
11+
#include <zephyr/input/input.h>
12+
#include <zephyr/input/input_touch.h>
13+
#include <zephyr/logging/log.h>
14+
15+
LOG_MODULE_REGISTER(ft6146, CONFIG_INPUT_LOG_LEVEL);
16+
17+
/* FT6146 register definitions */
18+
#define FT6146_REG_DEVICE_MODE 0x00
19+
#define FT6146_REG_GEST_ID 0x01
20+
#define FT6146_REG_TD_STATUS 0x02
21+
#define FT6146_REG_P1_XH 0x03
22+
#define FT6146_REG_P1_XL 0x04
23+
#define FT6146_REG_P1_YH 0x05
24+
#define FT6146_REG_P1_YL 0x06
25+
#define FT6146_REG_P1_WEIGHT 0x07
26+
#define FT6146_REG_P1_MISC 0x08
27+
#define FT6146_REG_P2_XH 0x09
28+
#define FT6146_REG_P2_XL 0x0A
29+
#define FT6146_REG_P2_YH 0x0B
30+
#define FT6146_REG_P2_YL 0x0C
31+
#define FT6146_REG_P2_WEIGHT 0x0D
32+
#define FT6146_REG_P2_MISC 0x0E
33+
#define FT6146_REG_THRESHOLD 0x80
34+
#define FT6146_REG_FILTER_COE 0x85
35+
#define FT6146_REG_CTRL 0x86
36+
#define FT6146_REG_TIMEENTERMONITOR 0x87
37+
#define FT6146_REG_PERIODACTIVE 0x88
38+
#define FT6146_REG_PERIODMONITOR 0x89
39+
#define FT6146_REG_RADIAN_VALUE 0x91
40+
#define FT6146_REG_OFFSET_LEFT_RIGHT 0x92
41+
#define FT6146_REG_OFFSET_UP_DOWN 0x93
42+
#define FT6146_REG_DIST_LEFT_RIGHT 0x94
43+
#define FT6146_REG_DIST_UP_DOWN 0x95
44+
#define FT6146_REG_ZOOM_DIS_SQR 0x96
45+
#define FT6146_REG_RADIAN_THRESHOLD 0x97
46+
#define FT6146_REG_SMALL_OBJECT_THRESHOLD 0x98
47+
48+
/* Device mode values */
49+
#define FT6146_DEVICE_MODE_NORMAL 0x00
50+
#define FT6146_DEVICE_MODE_TEST 0x04
51+
#define FT6146_DEVICE_MODE_SYSTEM 0x01
52+
53+
/* Gesture IDs */
54+
#define FT6146_GESTURE_NO_GESTURE 0x00
55+
#define FT6146_GESTURE_MOVE_UP 0x10
56+
#define FT6146_GESTURE_MOVE_RIGHT 0x14
57+
#define FT6146_GESTURE_MOVE_DOWN 0x18
58+
#define FT6146_GESTURE_MOVE_LEFT 0x1C
59+
#define FT6146_GESTURE_ZOOM_IN 0x48
60+
#define FT6146_GESTURE_ZOOM_OUT 0x49
61+
62+
/* Reset timing */
63+
#define FT6146_RESET_DELAY_MS 10
64+
#define FT6146_POST_RESET_DELAY_MS 100
65+
66+
#define CTP_DOWN (0U)
67+
#define CTP_UP (1U)
68+
#define CTP_MOVE (2U)
69+
#define CTP_RESERVE (3U)
70+
71+
struct ft6146_data {
72+
const struct device *dev;
73+
struct gpio_callback int_cb;
74+
struct k_work work;
75+
struct k_timer poll_timer;
76+
};
77+
78+
struct ft6146_config {
79+
struct input_touchscreen_common_config common;
80+
struct i2c_dt_spec i2c;
81+
struct gpio_dt_spec int_gpio;
82+
struct gpio_dt_spec reset_gpio;
83+
};
84+
85+
static void ft6146_process_touch(const struct device *dev, uint8_t status)
86+
{
87+
const struct ft6146_config *config = dev->config;
88+
uint8_t point_data[9];
89+
uint8_t event_flag;
90+
uint16_t x, y;
91+
int ret;
92+
93+
/* Read touch data */
94+
ret = i2c_burst_read_dt(&config->i2c, FT6146_REG_DEVICE_MODE, point_data,
95+
sizeof(point_data));
96+
if (ret < 0) {
97+
LOG_ERR("Failed to read touch data: %d", ret);
98+
return;
99+
}
100+
101+
event_flag = (point_data[FT6146_REG_P1_XH] >> 6) & 0x03;
102+
x = ((point_data[FT6146_REG_P1_XH] & 0x0F) << 8) + point_data[FT6146_REG_P1_XL];
103+
y = ((point_data[FT6146_REG_P1_YH] & 0x0F) << 8) + point_data[FT6146_REG_P1_YL];
104+
105+
LOG_DBG("event_flag:%d, x:%d, y:%d", event_flag, x, y);
106+
if ((event_flag == CTP_DOWN) || (event_flag == CTP_MOVE)) {
107+
input_touchscreen_report_pos(dev, x, y, K_FOREVER);
108+
input_report_key(dev, INPUT_BTN_TOUCH, 1, true, K_FOREVER);
109+
} else if (event_flag == CTP_UP) {
110+
input_report_key(dev, INPUT_BTN_TOUCH, 0, true, K_FOREVER);
111+
}
112+
}
113+
114+
static void ft6146_work_handler(struct k_work *work)
115+
{
116+
struct ft6146_data *data = CONTAINER_OF(work, struct ft6146_data, work);
117+
const struct device *dev = data->dev;
118+
119+
ft6146_process_touch(dev, 0);
120+
}
121+
122+
#ifndef CONFIG_INPUT_FT6146_INTERRUPT
123+
static void ft6146_poll_timer_handler(struct k_timer *timer)
124+
{
125+
struct ft6146_data *data = CONTAINER_OF(timer, struct ft6146_data, poll_timer);
126+
127+
k_work_submit(&data->work);
128+
}
129+
#else
130+
static void ft6146_isr_handler(const struct device *dev, struct gpio_callback *cb, uint32_t pins)
131+
{
132+
struct ft6146_data *data = CONTAINER_OF(cb, struct ft6146_data, int_cb);
133+
134+
k_work_submit(&data->work);
135+
}
136+
#endif
137+
138+
static int ft6146_reset(const struct device *dev)
139+
{
140+
const struct ft6146_config *config = dev->config;
141+
int ret;
142+
143+
if (!config->reset_gpio.port) {
144+
return 0;
145+
}
146+
147+
if (!device_is_ready(config->reset_gpio.port)) {
148+
LOG_ERR("Reset GPIO not ready");
149+
return -ENODEV;
150+
}
151+
152+
ret = gpio_pin_configure_dt(&config->reset_gpio, GPIO_OUTPUT_ACTIVE);
153+
if (ret < 0) {
154+
LOG_ERR("Failed to configure reset GPIO: %d", ret);
155+
return ret;
156+
}
157+
158+
k_msleep(FT6146_RESET_DELAY_MS);
159+
160+
/* De-assert reset */
161+
ret = gpio_pin_set_dt(&config->reset_gpio, 0);
162+
if (ret < 0) {
163+
LOG_ERR("Failed to de-assert reset: %d", ret);
164+
return ret;
165+
}
166+
167+
k_msleep(FT6146_POST_RESET_DELAY_MS);
168+
169+
return ret;
170+
}
171+
172+
static int ft6146_init(const struct device *dev)
173+
{
174+
const struct ft6146_config *config = dev->config;
175+
struct ft6146_data *data = dev->data;
176+
int ret;
177+
178+
if (!i2c_is_ready_dt(&config->i2c)) {
179+
LOG_ERR("I2C bus not ready");
180+
return -ENODEV;
181+
}
182+
183+
data->dev = dev;
184+
185+
/* Perform reset sequence */
186+
ret = ft6146_reset(dev);
187+
if (ret < 0) {
188+
return ret;
189+
}
190+
191+
#ifdef CONFIG_INPUT_FT6146_INTERRUPT
192+
ret = gpio_pin_configure_dt(&config->int_gpio, GPIO_INPUT);
193+
if (ret < 0) {
194+
LOG_ERR("Failed to configure interrupt GPIO: %d", ret);
195+
return ret;
196+
}
197+
198+
ret = gpio_pin_interrupt_configure_dt(&config->int_gpio, GPIO_INT_EDGE_TO_ACTIVE);
199+
if (ret < 0) {
200+
LOG_ERR("Failed to configure interrupt: %d", ret);
201+
return ret;
202+
}
203+
204+
gpio_init_callback(&data->int_cb, ft6146_isr_handler, BIT(config->int_gpio.pin));
205+
ret = gpio_add_callback(config->int_gpio.port, &data->int_cb);
206+
if (ret < 0) {
207+
LOG_ERR("Failed to add callback: %d", ret);
208+
return ret;
209+
}
210+
#else
211+
/* Initialize polling timer */
212+
k_timer_init(&data->poll_timer, ft6146_poll_timer_handler, NULL);
213+
k_timer_start(&data->poll_timer, K_MSEC(CONFIG_INPUT_FT6416_PERIOD),
214+
K_MSEC(CONFIG_INPUT_FT6416_PERIOD));
215+
#endif
216+
217+
/* Initialize work queue */
218+
k_work_init(&data->work, ft6146_work_handler);
219+
220+
return ret;
221+
}
222+
223+
#define FT6146_INIT(n) \
224+
static struct ft6146_data ft6146_data_##n; \
225+
\
226+
static const struct ft6146_config ft6146_config_##n = { \
227+
.common = INPUT_TOUCH_DT_INST_COMMON_CONFIG_INIT(n), \
228+
.i2c = I2C_DT_SPEC_INST_GET(n), \
229+
.reset_gpio = GPIO_DT_SPEC_INST_GET_OR(n, reset_gpios, {0}), \
230+
COND_CODE_1(CONFIG_INPUT_FT6146_INTERRUPT, \
231+
(.int_gpio = GPIO_DT_SPEC_INST_GET(n, int_gpios),), ()) }; \
232+
\
233+
DEVICE_DT_INST_DEFINE(n, ft6146_init, NULL, &ft6146_data_##n, &ft6146_config_##n, \
234+
POST_KERNEL, CONFIG_INPUT_INIT_PRIORITY, NULL);
235+
236+
DT_INST_FOREACH_STATUS_OKAY(FT6146_INIT)

‎dts/bindings/input/focaltech,ft6146.yaml‎

Lines changed: 17 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,17 @@
1+
# Copyright (c) 2025 Qingsong Gou <[email protected]>
2+
# SPDX-License-Identifier: Apache-2.0
3+
4+
description: FocalTech FT6146 capacitive touch controller
5+
6+
compatible: "focaltech,ft6146"
7+
8+
include: [i2c-device.yaml, touchscreen-common.yaml]
9+
10+
properties:
11+
int-gpios:
12+
type: phandle-array
13+
description: Interrupt GPIO specification, active low
14+
15+
reset-gpios:
16+
type: phandle-array
17+
description: Reset GPIO specification, active low

‎tests/drivers/build_all/input/app.overlay‎

Lines changed: 13 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -39,10 +39,12 @@
3939
compatible = "adc-keys";
4040
io-channels = <&test_adc 0>;
4141
keyup-threshold-mv = <0>;
42+
4243
button_0 {
4344
press-thresholds-mv = <1500>, <1750>;
4445
zephyr,code = <0>;
4546
};
47+
4648
button_1 {
4749
press-thresholds-mv = <2500>, <1750>;
4850
zephyr,code = <1>;
@@ -52,6 +54,7 @@
5254
gpio-keys {
5355
compatible = "gpio-keys";
5456
debounce-interval-ms = <30>;
57+
5558
button_0 {
5659
gpios = <&test_gpio 0 0>;
5760
zephyr,code = <0>;
@@ -61,6 +64,7 @@
6164
gpio-keys-polled {
6265
compatible = "gpio-keys";
6366
debounce-interval-ms = <30>;
67+
6468
button_0 {
6569
gpios = <&test_gpio 0 0>;
6670
zephyr,code = <0>;
@@ -134,6 +138,7 @@
134138

135139
analog_axis {
136140
compatible = "analog-axis";
141+
137142
axis-x {
138143
io-channels = <&test_adc 0>;
139144
out-min = <(-127)>;
@@ -174,6 +179,7 @@
174179

175180
sbus {
176181
compatible = "futaba,sbus";
182+
177183
right_stick_x {
178184
channel = <1>;
179185
type = <INPUT_EV_ABS>;
@@ -196,6 +202,13 @@
196202
int-gpios = <&test_gpio 0 0>;
197203
};
198204

205+
ft6146@0 {
206+
compatible = "focaltech,ft6146";
207+
reg = <0x0>;
208+
int-gpios = <&test_gpio 0 0>;
209+
reset-gpios = <&test_gpio 1 0>;
210+
};
211+
199212
gt911@1 {
200213
compatible = "goodix,gt911";
201214
reg = <0x1>;

0 commit comments

Comments
 (0)