[For Sale] Complete kits or DIY (WorldWide)

[metaljay]

I have kits still available!

---

There was surprisingly more interest than I expected from my previous post so decided to list again.

If you are struggling to solder or don’t want the hassle ordering all the small components and flashing.
Drop me an email if you are interested in purchasing. These are the latest V2B kits and have everything as per the guide.

I have both 4 and 6 wire kits available. Though for the 4 wire kits I am unable to test as I don’t have a 4 wire pump.

• Hardware only (requires you to solder and flash): £20 (plus postage)
• Fully assembled and flashed kit (ready to go!): £50 (plus postage)

Mainland UK is £4 postage and usually next working day
USA/Canada is £10 (marked as gift to keep costs down) - usually 3-5 working days
Europe is £8 (marked as gift to keep costs down) - usually 6-7 working days

I can post tracked if you want, usually £3 or £4 more but gives you insurance if lost.

Happy for PayPal or bank transfer.
Drop me an email to discuss: [email protected] (iCloud hide my email address)

Its worth noting, I'm not a business - I'm just one guy so whilst I'm usually pretty quick it may be a week before I can make one up.

Thanks

A few photos of previous ones:

[WesWesthaver]

@metaljay Thanks for offering this service. I received my module in 6 days from UK to USA.

As I said in my email to you, I'm up to my @$$ in alligators right now and I really appreciated you providing a pre-assembled module complete with firmware.

I was able to get up and running quickly and can stay focused on the other things demanding my attention right now.

Thanks again,
-Wes

[Alexd911]

Hey,

So you still have some of these boards avaialble?

Regard
Alex

[metaljay]

I do, drop me an email if you’re interested. You’ll need to confirm if your pump is 4 or 6 wire.

[Captain0Kangaroo]

Ordered my board which arrived quickly.
Simply opened up my pump housing and plugged in the module. Popped the cover back on and was up and running in minutes.
Great service and would 100% recommend 👍

[piffmunday]

I dropped a reply on another thread but I am interested in these if you still have one.

[metaljay]

I do, send me an email above.
Have a few built

[metaljay]

Still have some of these if anyone interested

[Chris-lal]

Hi, also interested, I dropped you an email!

[No-World-Order]

I received mine in NL and it worked great. First i had some trouble, but got all the support needed to get things going. If you are looking for this i can recommend getting it from him! :)

[robxbl69]

Dropping you an email now ;)

[robxbl69]

Received kit yesterday, will put together tomorrow. Watch this space :)

[robxbl69]

Kit went together without any issues, all flashed and connected to my wifi. Before I fit it to the pump I want to print the enclosure I designed this afternoon. Preview below:

[coreypottebaum]

Would you be willing to share the print file for this?

[robxbl69]

Yes sure, I'd always planned to do so. Will sort either later today or tomorrow.

[colinpeddle]

Did you ever share this somewhere?

[AttiMM]

Hi @robxbl69 , can we receive the print file (as you promised ;-) ) ?

[Mat-Moo]

Still got some?

[metaljay]

I do, drop me an email.
I’m on holiday until 1st November though

[Mat-Moo]

Sent email

[Mat-Moo]

Received built and ready to install, thanks for help and support

[mpjanofsky]

Just got my kit yesterday and have it installed and working. Thanks for the quick shipping!

[coreypottebaum]

Add another happy customer here. Thanks!

[victordiges]

I got my kit today, looking forward to install it asap! :)

[ticho777]

Hi, I am also interested. I just dropped you an email! thank you in advance.

[Rodrigocicci]

Sent you an email. if you still have any 6 wire board ready i would like to prchase one. Thanks in advance.

[jmadejek]

Wiring for S200102 will be the same?

[metaljay]

You’ll have to open your pump to confirm if it’s 6 or 4 wire version to be 100%

[Peele69]

@metaljay Thank you, the pcb works very good! Fast response to my questions.

[alexapps1]

Thanks @metaljay

Received super fast. Cheers! Getting the same issue as a few people here: #673

What pump do you have?

[alexapps1]

@metaljay do you know if you've had anyone get the S100102 pump working with the kit with the red LLC? Wondering if I should just buy another soldered by you to confirm it's not my soldering.

[metaljay]

Could you take a few photos of your soldering? What pump config have you selected?
I’ve had people have success with my boards and 102,

my pump is 101 and I select 6 wire pre 2021

[alexapps1]

6 wire pre 2021 same as you. Miami it says on the webpage. The tub is a Hollywood.

My soldering on the llc is not so great having had another look.

[karls238]

Hello ! The spa display dont work anymore since several days..., all is ok from wifi. Previously all works perfectly...On the spa display when I press buttons there is no longueur bip. And if I press a buttons on thé spa display nothing work. Maybe I have accidentaly tick something wrong in the menu ? Thanks by advance !

[karls238]

Thanks a lot, I will check and reset if necessary, I will let you know, thx by advance.

[karls238]

Hello I have check this week end so,
All seems ok, no corrosion, solderings looks good I have also disconnect red board and reconnect it, reset the board, but nothing change the spa display is always not fuctionnal...(all work perfectly during 3 weeks) If I remove the bord from the spa, the display buttons works correcty. Do you have any idea of the issue ? My spa is a Maldive. Thanks by advance.

Hello ! The spa display dont work anymore since several days..., all is ok from wifi. Previously all works perfectly...On the spa display when I press buttons there is no longueur bip. And if I press a buttons on thé spa display nothing work. Maybe I have accidentaly tick something wrong in the menu ? Thanks by advance !

Hello, few questions. did it ever work? Has it been wet or cable become loose? The soldering looks good still? No corrosion? Have you checked your pump config hasn’t become lost and you need to re-enable? Finally, can you lift and resit the red circuit board (whilst it’s all plugged in) once it’s back in press the RST button and let me know if anything changes

[metaljay]

Sorry I didn’t get a notation for this, have you tried removing and replacing the red board whilst there is power to the main board? Are you able to connect via the web still?

[karls238]

Hello ! I have use your previous advice (removing and replacing the red board whilst there is power) and all works fine now, Thanks for your precious help !

[metaljay]

Hello ! I have use your previous advice (removing and replacing the red board whilst there is power) and all works fine now, Thanks for your precious help !

Glad it works, but this appears to show there is a problem with the LLC (red board) hopefully doesn’t occur again but might be worth checking the pins on it for any corrosion or damage.

[BAttila618]

Hello!
I am interested in the product, I sent an email

[lstoian79]

I got the assembled and preprogrammed kit (took almost 4 weeks for Romania post office to inform me about arrival from UK ... :-[ ) Other than that it all works fine. Just pluggen in, setup wifi, and all works, I'm printing these days an enclosure (might put inside a small silicagel bag to reduce the moisture). Currently I use the layzspa.local web page to control it, via port forwarding in router. In future maybe HomeAssistant will take over.
For reference, I use it on a Lay-Z-Spa Helsinki, 6wires connector, S100101 model (~2022 was the year of purchase)

Thanks for the kit @metaljay!

[Glurik]

Just received a fully assembled kit from @metaljay. Work perfectly, as expected. Integration with HA works great. I have MAIAMI Model S100102 (6 wire, 2021 (air))
Thanks a lot.

[alexapps1]

Did you use the A ports or B ports? Did you shorten the wires? Do you have a photo? About to disassemble mine for the third time and take some photos to work out what I’ve done wrong. Thanks.

[metaljay]

Sorry I missed this question, I use the B ports and do not shorten the cables. I follow the guide directly 😁

[Osjuh]

I got the 6 Wire assembled unit yesterday. Installed it and configured to my S100101 pump.
Connection to my Home Assistant via MQTT works great.

Great service and quick in responding on the e-mails.

If you don't want the hassle ordering everything apart from each other or even solder your own, I suggest taking one from here.

[Dalmomof3]

I have kits still available!

There was surprisingly more interest than I expected from my previous post so decided to list again.

If you are struggling to solder or don’t want the hassle ordering all the small components and flashing. Drop me an email if you are interested in purchasing. These are the latest V2B kits and have everything as per the guide.

I have both 4 and 6 wire kits available. Though for the 4 wire kits I am unable to test as I don’t have a 4 wire pump.

• Hardware only (requires you to solder and flash): £20 (plus postage)
• Fully assembled and flashed kit (ready to go!): £50 (plus postage)

Mainland UK is £4 postage and usually next working day USA/Canada is £10 (marked as gift to keep costs down) - usually 5-10 working days Europe is £8 (marked as gift to keep costs down) - usually 5 working days

Happy for PayPal or bank transfer. Drop me an email to discuss: [email protected] (iCloud hide my email address)

Its worth noting, I'm not a business - I'm just one guy so whilst I'm usually pretty quick it may be a week before I can make one up.

Thanks

A few photos of previous ones:

![IMG_4354](https://private-user-images.githubusercontent.com/10380582/346184288-c5c6c96f-

[Dalmomof3]

Hi . I am very interested in purchasing a kit . how do i know if my unit is four or six wires?

[metaljay]

Open the pump up and take a look, it’s just 4 screws

most pumps 2021+ are all 6 wire though

[mcmeechan84]

Hi, I'm very interested in purchasing one of these, is there an option to set the heating and pump to a timer within the interface.

[metaljay]

Yes, it’s worth reading the manual so you know the capabilities. Drop me an email

[mcmeechan84]

Done

[mungler]

Hi, are kits still available? :)

[metaljay]

Yes, drop me an email if your interested

[andrew-rinato]

Just got mine and wired it up, thanks!

[matthewalampe]

Unfortunately, I did not have luck with this full hardware kit purchased. Ive had it for over a year now and it never worked right. The display never functioned and I went back and forth over email, sending videos, etc. but never got anywhere and he wanted me to pay for shipping to get a new one/flash. Even without the display, it never seems to stay connected. Im constantly having to reseat the modules to bring online. Ive spent more time trying to fix the module than if I had just left the display on and manually adjusted it :(

After reading above, wondering if its a bad llc board? Seems like others have had the same issue

[matthewalampe]

Screenshot_20250119_231719_Outlook
_

[matthewalampe]

This is an email I sent right after I received the board and plugged it in, it never worked

[matthewalampe]

I have the same issue as karls238 above with the display but mine never worked even after reseating. Issue on LLC board?

[metaljay]

I’m not entirely sure what to say to you anymore, I’ve offered many times to replace the board free of charge you just needed to pay postage costs. To be honest, the fact you didn’t email me back and chose to reply on here says a lot.

[matthewalampe]

I did respond to your email. We went back and forth over 15 times, with me sending you screenshots, videos, etc. of everything you asked. I did not have a good experience, so I decided to share. I was excited to purchase a board from you but when it never worked when I plugged it in, and still continues not to work (even after re-flashing, checking connections, etc.) and then asked to pay more, it is a fustration.