the results processed by rtknavi are just single

[zhuozwh]

I have tried to use rtknavi to process the testdata you provided, but the resaults just can show "single" for most. And i tried other datas from other people, it just can show "single"for all. I cann't find the reason, could you tell me why or how to do can handle this problem. (the conf file using which you provide).
Thank you so much for your help.

[SergeyDolin]

Hello, @zhuozwh can you take a screenshot of your configuration file?

[zhuozwh]

Hello, @zhuozwh can you take a screenshot of your configuration file?

[SergeyDolin]

@zhuozwh For post processing it is better to use "rtkpost". You don't have a navigation message file "brdc" for the date of your measurements.
And if you want to process the base line in kinematic mode using the relative method, then you also need to specify the exact coordinates of the base station (position tab), or if there are none, then simply record the coordinates from the file. You also need an .atx file with parameters for the variation of phase centers of satellite antennas and receivers

[zhuozwh]

@zhuozwh For post processing it is better to use "rtkpost". You don't have a navigation message file "brdc" for the date of your measurements. And if you want to process the base line in kinematic mode using the relative method, then you also need to specify the exact coordinates of the base station (position tab), or if there are none, then simply record the coordinates from the file. You also need an .atx file with parameters for the variation of phase centers of satellite antennas and receivers

Thank you! I'll try in the method that you provide. For another sheet of gnss datas which I recieved , i've processed them with rtkpost, and show some "float" and "fix"results. Thanks for your help again!