[Bug]: Stream Ultra / AC Pro: After update to firmware 1.0.1.41 values zero

[bczapp]

Versions

Integration 1.3.0, HA 2025.9.3

Device Model

Stream Ultra

Integration Type

Public API

What's the problem?

After updating Ecoflow Stream Ultra and AC Pro to firmware version 1.0.1.41 some sensors return "0".
Like PV Sum, Power AC SYS, Power Battery.

Others are shown fine like PV1 to PV4, Power AC, In Power, Cycles and Battery Temperature

Issue started immediately after firmware update.

Logs (if any)

Device Status

• Works in EcoFlow app
• Shows as connected in HA
• All entities show zeros/unavailable
• Was working before

[bczapp]

PS: Updated to 1.4.0 Beta 2 without any changes to this issue. Also updates HA to 2025.9.4 (no change)

[bczapp]

Update 2: I looked at it some more and it seems as if the sensor readings are now on my AC Pro instead of the Ultra.
Like the "_power_battery" sensor previously had only valid readings on the ultra and always 0 on the ac pro. Now it's the opposite way. Same is true for power_sys_load and _power_pv_sum.

[nevakee]

I had the same problem after updating to 1.0.1.41. But the problem also occurred with an earlier update (e.g. 1.0.1.30).

The solution was to turn the AC Pro off and on again. Then both displayed the correct values in Home Assistant again.

[phoinixgrr]

Hey @bczapp

Whould you mind letting me know, how you have managed to get all these data from the Ecoflow Public API?
I also run an Ecoflow Stream Ultra , but don't have all this wealth of information like temperatures, PV1-4 , Cycles , etc

I run 1.0.1.41.

Thanks!