small_monsters.scad

include <boardgame_insert_toolkit_lib.2.scad>;

// determines whether lids are output.
g_b_print_lid = f;

// determines whether boxes are output.
g_b_print_box = t; 

// Focus on one box
g_isolated_print_box = ""; 

// Used to visualize how all of the boxes fit together. 
g_b_visualization = false;          
        
// this is the outer wall thickness. 
//Default = 1.5mm
g_wall_thickness = 1.5;

// The tolerance value is extra space put between planes of the lid and box that fit together.
// Increase the tolerance to loosen the fit and decrease it to tighten it.
//
// Note that the tolerance is applied exclusively to the lid.
// So if the lid is too tight or too loose, change this value ( up for looser fit, down for tighter fit ) and 
// you only need to reprint the lid.
// 
// The exception is the stackable box, where the bottom of the box is the lid of the box below,
// in which case the tolerance also affects that box bottom.
//
g_tolerance = 0.15;

// This adjusts the position of the lid detents downward. 
// The larger the value, the bigger the gap between the lid and the box.
g_tolerance_detents_pos = 0.1;

label = "Small Cards"; // Roberta Tolben Quill Olette Elwyn
data =
[

    [   "card tray - push down",
        [
            [ BOX_SIZE_XYZ,                                     [73, 98,38] ],
            [ BOX_LID,
                [
                    [ LID_SOLID_B, f],    
                    [ LID_PATTERN_RADIUS,         5],        
                    [ LID_LABELS_BG_THICKNESS, 4],

                    [ LID_PATTERN_N1,               7 ],
                    [ LID_PATTERN_N2,               7 ],
                    [ LID_PATTERN_ANGLE,            25.7 ],
                    [ LID_PATTERN_ROW_OFFSET,       10 ],
                    [ LID_PATTERN_COL_OFFSET,       140 ],
                    [ LID_PATTERN_THICKNESS,        0.6 ],
                    [ LABEL,
                        [
                            [ LBL_TEXT,    label],
                            [ ROTATION,     45 ],
                            [ LBL_SIZE,     AUTO ],
                            [ LBL_FONT,         "Orthodox Herbertarian:style=Regular"],
                        ]
           
                ],
                 ]
            ],

            [ BOX_COMPONENT,
                [                
                    [ CMP_NUM_COMPARTMENTS_XY, [1, 2] ],
                    [ CMP_COMPARTMENT_SIZE_XYZ, [ 66, 44, 35] ],
                ]
            ], 

            [ BOX_COMPONENT,
                [
                    [CMP_COMPARTMENT_SIZE_XYZ,  [ 20, 99, 35 ] ],
                ]
            ],                          
        ]
    ],    

    
  

 
    


   


];


MakeAll();