chore: replace kit.svelte.dev links with updated URLs (#603)

---------

Co-authored-by: Simon H <[email protected]>

Author: benmccann

apps/kit.svelte.dev/vercel.json

@@ -6,6 +6,16 @@
 			"destination": "https://svelte.dev/",
 			"permanent": true
 		},
+		{
+			"source": "/docs/layouts",
+			"destination": "https://svelte.dev/docs/kit/routing",
+			"permanent": true
+		},
+		{
+			"source": "/docs/loading",
+			"destination": "https://svelte.dev/docs/kit/load",
+			"permanent": true
+		},
 		{
 			"source": "/docs/modules",
 			"destination": "https://svelte.dev/docs/kit/@sveltejs-kit"

apps/svelte.dev/content/blog/2021-03-23-sveltekit-beta.md

@@ -24,7 +24,7 @@ npm install
 npm run dev -- --open
 ```
 
-You'll find documentation at [kit.svelte.dev/docs](https://kit.svelte.dev/docs). If you have a [Sapper](https://sapper.svelte.dev) app that you'd like to migrate to SvelteKit, you'll find instructions at [kit.svelte.dev/docs/migrating](https://kit.svelte.dev/docs/migrating).
+You'll find documentation at [svelte.dev/docs/kit](/docs/kit). If you have a [Sapper](https://sapper.svelte.dev) app that you'd like to migrate to SvelteKit, you'll find instructions at [svelte.dev/docs/kit/migrating](/docs/kit/migrating).
 
 The source code is available at [github.com/sveltejs/kit](https://github.com/sveltejs/kit). Issues and pull requests are disabled while we finish getting our house in order, but we'll be making it fully open in the near future.
 
@@ -58,7 +58,7 @@ Using unfinished software to build an app that will be seen by millions of peopl
 
 ## The road to 1.0
 
-You can see the list of outstanding issues with the 1.0 milestone on our [issue tracker](https://github.com/sveltejs/kit/issues?q=is%3Aopen+is%3Aissue+milestone%3A1.0). Alongside that work, we plan to upgrade the documentation and add more [adapters](https://kit.svelte.dev/docs/adapters).
+You can see the list of outstanding issues with the 1.0 milestone on our [issue tracker](https://github.com/sveltejs/kit/issues?q=is%3Aopen+is%3Aissue+milestone%3A1.0). Alongside that work, we plan to upgrade the documentation and add more [adapters](/docs/kit/adapters).
 
 Most importantly though, we need your feedback to help us make the best possible app framework. Try it out, and let us know which pieces are missing.
 

apps/svelte.dev/content/blog/2021-05-01-whats-new-in-svelte-may-2021.md

@@ -17,9 +17,9 @@ Last week, Svelte Summit blew us away with a mountain of content! [Check out the
 - [kit.svelte.dev](https://kit.svelte.dev/) has a fresh new look and the [SvelteKit Demo Site](https://netlify.demo.svelte.dev/) got a fresh set of paint. Check it out by running `npm init svelte@next`
 - You can now use `@sveltejs/adapter-static` to create a single-page app or SPA by specifying a fallback page ([PR](https://github.com/sveltejs/kit/pull/1181), [Docs](https://github.com/sveltejs/kit/tree/master/packages/adapter-static))
 - Disable Server-side Rendering (SSR) app-wide or on a page-by-page basis ([PR](https://github.com/sveltejs/kit/pull/713))
-- Error messages thrown during pre-rendering are now much more informative and readable ([PR](https://github.com/sveltejs/kit/pull/1062), [Docs](https://kit.svelte.dev/docs/layouts#error-pages))
-- Layouts can now be reset to prevent pages from inheriting the root layout. This is useful if you have a specific layout for a page or i18n variation ([PR](https://github.com/sveltejs/kit/pull/1061), [Docs](https://kit.svelte.dev/docs/layouts#resets))
-- `fetch` in SvelteKit code will now use the environment-provided implementation, whenever possible. If `fetch` is unavailable, it will be polyfilled by adapters ([PR](https://github.com/sveltejs/kit/pull/1066), [Docs](https://kit.svelte.dev/docs/loading#input-fetch))
+- Error messages thrown during pre-rendering are now much more informative and readable ([PR](https://github.com/sveltejs/kit/pull/1062), [Docs](/docs/kit/routing#error))
+- Layouts can now be reset to prevent pages from inheriting the root layout. This is useful if you have a specific layout for a page or i18n variation ([PR](https://github.com/sveltejs/kit/pull/1061), [Docs](/docs/kit/advanced-routing#Advanced-layouts-layout))
+- `fetch` in SvelteKit code will now use the environment-provided implementation, whenever possible. If `fetch` is unavailable, it will be polyfilled by adapters ([PR](https://github.com/sveltejs/kit/pull/1066), [Docs](/docs/kit/load#Making-fetch-requests))
 
 ## New in Svelte & Language Tools
 

apps/svelte.dev/content/blog/2021-09-01-whats-new-in-svelte-september-2021.md

@@ -29,8 +29,8 @@ The focus this past month was on continuing to iron out any kinks, with well ove
 
 - SvelteKit will now detect if a prerendered app is trying to access a query parameter and return an error instead of failing silently ([#2104](https://github.com/sveltejs/kit/pull/2104))
 - `adapter-node` now lets you [add the Kit middleware to your own server](https://kit.svelte.dev/faq#integrations) for use with other middleware. You can also [add middleware in dev mode](https://kit.svelte.dev/faq#how-do-i-use-x-with-sveltekit-how-do-i-use-middleware) with more improvements to come in this area
-- The new [`sequence` helper lets you chain together multiple `handle` calls](https://kit.svelte.dev/docs/modules#sveltejs-kit-hooks)
-- A new [`handleError` hook](https://kit.svelte.dev/docs/hooks#handleerror) gives you the option to send data to an error tracking service, or to customise the formatting before printing the error to the console.
+- The new [`sequence` helper lets you chain together multiple `handle` calls](/docs/kit/@sveltejs-kit-hooks)
+- A new [`handleError` hook](/docs/kit/hooks#Shared-hooks-handleError) gives you the option to send data to an error tracking service, or to customise the formatting before printing the error to the console.
 - `adapter-node` can now listen on socket path ([#2048](https://github.com/sveltejs/kit/pull/2048))
 
 To see all updates to SvelteKit, check out the [SvelteKit changelog](https://github.com/sveltejs/kit/blob/master/packages/kit/CHANGELOG.md).

apps/svelte.dev/content/blog/2022-02-01-whats-new-in-svelte-february-2022.md

@@ -18,23 +18,23 @@ Let's take a look...
 
 ## What's new in SvelteKit
 
-- `inlineStyleThreshold` allows you to specify where inline stylesheets are inserted into the page ([Docs](https://kit.svelte.dev/docs/configuration#inlinestylethreshold), [#2620](https://github.com/sveltejs/kit/pull/2620))
-- `beforeNavigate`/`afterNavigate` lifecycle functions lets you add functionality before or after a page navigation ([Docs](https://kit.svelte.dev/docs/modules#$app-navigation), [#3293](https://github.com/sveltejs/kit/pull/3293))
-- Platform context can now be passed from adapters ([Docs](https://kit.svelte.dev/docs/adapters#supported-environments-platform-specific-context), [#3429](https://github.com/sveltejs/kit/pull/3429))
-- Hooks now have an `ssr` parameter in `resolve` to make it easier to skip SSR, when needed ([Docs](https://kit.svelte.dev/docs/hooks#handle), [#2804](https://github.com/sveltejs/kit/pull/2804))
+- `inlineStyleThreshold` allows you to specify where inline stylesheets are inserted into the page ([Docs](/docs/kit/configuration#inlineStyleThreshold), [#2620](https://github.com/sveltejs/kit/pull/2620))
+- `beforeNavigate`/`afterNavigate` lifecycle functions lets you add functionality before or after a page navigation ([Docs](/docs/kit/$app-navigation), [#3293](https://github.com/sveltejs/kit/pull/3293))
+- Platform context can now be passed from adapters ([Docs](/docs/kit/adapters#Platform-specific-context), [#3429](https://github.com/sveltejs/kit/pull/3429))
+- Hooks now have an `ssr` parameter in `resolve` to make it easier to skip SSR, when needed ([Docs](/docs/kit/hooks#Server-hooks-handle), [#2804](https://github.com/sveltejs/kit/pull/2804))
 - `$page.stuff` provides a mechanism for pages to pass data 'upward' to layouts ([Docs](https://kit.svelte.dev/docs/loading#input-stuff), [#3252](https://github.com/sveltejs/kit/pull/3252))
-- Fallthrough routes let you specify where to route when an route can't be loaded ([Docs](https://kit.svelte.dev/docs/routing#advanced-routing-fallthrough-routes), [#3217](https://github.com/sveltejs/kit/pull/3217))
+- Fallthrough routes let you specify where to route when an route can't be loaded ([#3217](https://github.com/sveltejs/kit/pull/3217))
 
 ### New configs
 
-- Content Security Policy (CSP) is now supported for increased security when using inline javascript or stylesheets ([Docs](https://kit.svelte.dev/docs/configuration#csp), [#3499](https://github.com/sveltejs/kit/pull/3499))
-- `kit.routes` config allows you to customise public/private modules during build ([Docs](https://kit.svelte.dev/docs/configuration#routes), [#3576](https://github.com/sveltejs/kit/pull/3576))
-- `prerender.createIndexFiles` config lets you prerender index.html files as their subfolder's name ([Docs](https://kit.svelte.dev/docs/configuration#prerender), [#2632](https://github.com/sveltejs/kit/pull/2632))
+- Content Security Policy (CSP) is now supported for increased security when using inline javascript or stylesheets ([Docs](/docs/kit/configuration#csp), [#3499](https://github.com/sveltejs/kit/pull/3499))
+- `kit.routes` config allows you to customise public/private modules during build ([#3576](https://github.com/sveltejs/kit/pull/3576))
+- `prerender.createIndexFiles` config lets you prerender index.html files as their subfolder's name ([#2632](https://github.com/sveltejs/kit/pull/2632))
 - HTTP methods can now be overridden using `kit.methodOverride` ([Docs](https://kit.svelte.dev/docs/routing#endpoints-http-method-overrides), [#2989](https://github.com/sveltejs/kit/pull/2989))
 
 ### Config changes
 
-- `config.kit.hydrate` and `config.kit.router` are now nested under `config.kit.browser` ([Docs](https://kit.svelte.dev/docs/configuration#browser), [3578](https://github.com/sveltejs/kit/pull/3578))
+- `config.kit.hydrate` and `config.kit.router` are now nested under `config.kit.browser` ([3578](https://github.com/sveltejs/kit/pull/3578))
 
 ### Breaking change
 

apps/svelte.dev/content/blog/2022-03-01-whats-new-in-svelte-march-2022.md

@@ -13,9 +13,9 @@ More on that and other new features and fixes below!
 
 ## What's new in SvelteKit
 
-- The docs are now searchable and multipage with type definitions and hoverable code examples - Check them out at [kit.svelte.dev/docs](https://kit.svelte.dev/docs/)
-- Page endpoints significantly decrease the boilerplate needed when loading a page ([Issue](https://github.com/sveltejs/kit/issues/3532), [PR](https://github.com/sveltejs/kit/pull/3679), [Docs](https://kit.svelte.dev/docs/routing#endpoints-page-endpoints))
-- Application versioning and update detection support lets you determine what to do when a route fails to load after an app update ([Issue](https://github.com/sveltejs/kit/issues/87), [PR](https://github.com/sveltejs/kit/pull/3412), [Docs](https://kit.svelte.dev/docs/configuration#version))
+- The docs are now searchable and multipage with type definitions and hoverable code examples - Check them out at [svelte.dev/docs/kit](/docs/kit/)
+- Page endpoints significantly decrease the boilerplate needed when loading a page ([Issue](https://github.com/sveltejs/kit/issues/3532), [PR](https://github.com/sveltejs/kit/pull/3679), [Docs](/docs/kit/routing#server))
+- Application versioning and update detection support lets you determine what to do when a route fails to load after an app update ([Issue](https://github.com/sveltejs/kit/issues/87), [PR](https://github.com/sveltejs/kit/pull/3412), [Docs](/docs/kit/configuration#version))
 - A new option in `npm init svelte@next` will now set up Playwright automatically for testing ([PR](https://github.com/sveltejs/kit/pull/4056))
 
 ### Breaking Changes
@@ -24,7 +24,7 @@ More on that and other new features and fixes below!
 - App-level types now live in the `App` namespace which allows you to type global types like `Stuff` or `Session` ([#3670](https://github.com/sveltejs/kit/pull/3670))
 - `JSONString` is now `JSONValue` ([#3683](https://github.com/sveltejs/kit/pull/3683))
 - `createIndexFiles` has been removed — it is now controlled by the `trailingSlash` option ([#3801](https://github.com/sveltejs/kit/pull/3801))
-- SvelteKit will no longer exclude root-relative external links from prerendering, which will cause 404s if these URLs are intended to be served by a separate app. Use a custom [`prerender.onError`](https://kit.svelte.dev/docs/configuration#prerender) handler if you need to ignore them ([#3826](https://github.com/sveltejs/kit/pull/3826))
+- SvelteKit will no longer exclude root-relative external links from prerendering, which will cause 404s if these URLs are intended to be served by a separate app. Use a custom [`prerender.onError`](/docs/kit/configuration#prerender) handler if you need to ignore them ([#3826](https://github.com/sveltejs/kit/pull/3826))
 
 ## New in Language Tools
 

apps/svelte.dev/content/blog/2022-04-01-whats-new-in-svelte-april-2022.md

@@ -11,15 +11,15 @@ More on that, and what else is new in Svelte, as we dive in...
 
 ## What's new in SvelteKit
 
-- Param matchers allow you to check if a url parameter matches before rendering a page - replacing the need for fallthrough routes for this purpose ([Docs](https://kit.svelte.dev/docs/routing#advanced-routing-matching), [#4334](https://github.com/sveltejs/kit/pull/4334))
+- Param matchers allow you to check if a url parameter matches before rendering a page - replacing the need for fallthrough routes for this purpose ([Docs](/docs/kit/advanced-routing#Matching), [#4334](https://github.com/sveltejs/kit/pull/4334))
 - Explicit redirects can now be handled directly from endpoints ([#4260](https://github.com/sveltejs/kit/pull/4260))
 - `svelte-kit sync` ([#4182](https://github.com/sveltejs/kit/pull/4182)), TypeScript 4.6 ([#4190](https://github.com/sveltejs/kit/pull/4190)) and Vite 2.9 were released - adding non-blocking dependency optimization and experimental CSS source maps in dev mode as well as a number of bug fixes contributed by the SvelteKit team ([#4468](https://github.com/sveltejs/kit/pull/4468))
 
 ### New Config Options
 
-- `outDir` fixes path issues in monorepos and other situations where the desired output directory is outside the project directory ([Docs](https://kit.svelte.dev/docs/configuration#outdir), [#4176](https://github.com/sveltejs/kit/pull/4176))
-- `endpointExtensions` prevents files other than .js and .ts files from being treated as endpoints, unless you specify endpointExtensions ([Docs](https://kit.svelte.dev/docs/configuration#endpointextensions), [#4197](https://github.com/sveltejs/kit/pull/4197))
-- `prerender.default` lets you prerender every page without having to write `export const prerender = true` in every page file ([Docs](https://kit.svelte.dev/docs/configuration#prerender), [#4192](https://github.com/sveltejs/kit/pull/4192))
+- `outDir` fixes path issues in monorepos and other situations where the desired output directory is outside the project directory ([Docs](/docs/kit/configuration#outDir), [#4176](https://github.com/sveltejs/kit/pull/4176))
+- `endpointExtensions` prevents files other than .js and .ts files from being treated as endpoints, unless you specify `endpointExtensions` ([Docs](https://kit.svelte.dev/docs/configuration#endpointextensions), [#4197](https://github.com/sveltejs/kit/pull/4197))
+- `prerender.default` lets you prerender every page without having to write `export const prerender = true` in every page file ([Docs](/docs/kit/configuration#prerender), [#4192](https://github.com/sveltejs/kit/pull/4192))
 
 ### Breaking Changes
 

apps/svelte.dev/content/blog/2022-05-01-whats-new-in-svelte-may-2022.md

@@ -23,12 +23,12 @@ With yesterday's Svelte Summit behind us, we've got a lot of news to share! Chec
 
 - Files and directories can now be named `__tests__` and `__test__` in the routes directory ([#4438](https://github.com/sveltejs/kit/pull/4438))
 - Netlify Edge Functions ([#4657](https://github.com/sveltejs/kit/pull/4657)) and the Vercel build output API ([#4663](https://github.com/sveltejs/kit/pull/4663)) are now supported
-- Custom `load` dependencies, array of strings representing URLs the page depends on, are now available when loading routes ([Docs](https://kit.svelte.dev/docs/loading#output-dependencies), [#4536](https://github.com/sveltejs/kit/pull/4536))
+- Custom `load` dependencies, array of strings representing URLs the page depends on, are now available when loading routes ([Docs](/docs/kit/load#Rerunning-load-functions), [#4536](https://github.com/sveltejs/kit/pull/4536))
 
 ### Breaking Changes
 
-- Validators are now called "matchers" ([Docs](https://kit.svelte.dev/docs/routing#advanced-routing-matching), [#4358](https://github.com/sveltejs/kit/pull/4358))
-- `__layout.reset` has been replaced by named layouts - which have much configurability for shared layout elements ([Docs](https://kit.svelte.dev/docs/layouts#named-layouts), [#4388](https://github.com/sveltejs/kit/pull/4388))
+- Validators are now called "matchers" ([Docs](/docs/kit/advanced-routing#Matching), [#4358](https://github.com/sveltejs/kit/pull/4358))
+- `__layout.reset` has been replaced by named layouts - which have much configurability for shared layout elements ([Docs](/docs/kit/advanced-routing#Advanced-layouts-layout), [#4388](https://github.com/sveltejs/kit/pull/4388))
 - Prerendering is now skipped for `rel="external"` links ([#4545](https://github.com/sveltejs/kit/pull/4545))
 - `maxage` is now `cache` in `LoadOutput` ([#4690](https://github.com/sveltejs/kit/pull/4690))
 

apps/svelte.dev/content/blog/2022-06-01-whats-new-in-svelte-june-2022.md

@@ -18,16 +18,16 @@ Let's dive in!
 ## What's new in SvelteKit
 
 - Vite 2.9.9 was released as one of the last Vite 2 releases. The Svelte team has been hard at work contributing to the Vite 3 release to make the integration between SvelteKit and Vite smoother than ever ([Vite 3.0 Milestone](https://github.com/vitejs/vite/milestone/5))
-- `config.kit.alias` lets you more easily declare a custom alias to replace values in `import` statements ([Docs](https://kit.svelte.dev/docs/configuration#alias), [PR](https://github.com/sveltejs/kit/pull/4964))
+- `config.kit.alias` lets you more easily declare a custom alias to replace values in `import` statements ([Docs](/docs/kit/configuration#alias), [PR](https://github.com/sveltejs/kit/pull/4964))
 - Pages marked for prerendering will now fail during SSR at runtime ([PR](https://github.com/sveltejs/kit/pull/4812))
 
 ### Breaking Changes
 
 - Node 14 is no longer supported ([PR](https://github.com/sveltejs/kit/pull/4922))
 - Requests to `/favicon.ico` will no longer be suppressed and will instead be handled as a valid route ([PR](https://github.com/sveltejs/kit/pull/5046))
-- AMP support has been moved to a separate `@sveltejs/amp` package ([Docs](https://kit.svelte.dev/docs/seo#manual-setup-amp), [PR](https://github.com/sveltejs/kit/pull/4710))
+- AMP support has been moved to a separate `@sveltejs/amp` package ([Docs](/docs/kit/seo#Manual-setup-AMP), [PR](https://github.com/sveltejs/kit/pull/4710))
 - Generated types are now written to `_types` directories - update your imports accordingly ([PR](https://github.com/sveltejs/kit/pull/4705))
-- `%svelte.head%` and `%svelte.body%` are now `%sveltekit.head%` and `%sveltekit.body%` in `app.html` ([Docs](https://kit.svelte.dev/docs/migrating#project-files-src-template-html), [PR](https://github.com/sveltejs/kit/pull/5016/))
+- `%svelte.head%` and `%svelte.body%` are now `%sveltekit.head%` and `%sveltekit.body%` in `app.html` ([PR](https://github.com/sveltejs/kit/pull/5016/))
 - `LoadInput` is now `LoadEvent`
 - Dropped support for Wrangler 1 in favor of Wrangler 2 ([PR](https://github.com/sveltejs/kit/pull/4887))