bill_of_materials.md

Bill of Materials - Tamiya TT02

This page lists the parts needed to build JetRacer - Tamiya TT02 version. After you've received the parts, follow the hardware setup.

Jetson Nano

Part	Quantity	Cost	URL	Notes	My Notes
Jetson Nano	1	$99.00	NVIDIA, Amazon		In hand
Micro SD Card	1	$11.99	Amazon	Must be at least 32GB	Ordered
USB Battery	1	$13.99	Amazon	Must provide at least 5V @ 2A	Ordered
USB A -> 2.1mm Barrel Cable	1	$7.00	Amazon		Ordered
5V @ 4A Barrel Plug Power Supply	1	$14.95	Adafruit	2.1mm Iinner diameter	Ordered
Jumper Caps Pack	1	$5.09	Amazon	2.54mm pitch	Ordered

Chassis

Part	Quantity	Cost	URL	Notes	My Notes
RC Car	1	$118.99	Amazon, Hobbytown, Tamiya	Tamiya NSX TT-02 assembly kit	Ordered
Servo	1	$15.98	Amazon	Futaba S3004 Standard Ball Bearing Servo	Ordered
TX RX Combo	1	$129.99	Amazon	Futaba 3PV 3ch 2.4GHz transmitter and receiver module set	Do we need this?
RC battery pack	1	$39.99	Amazon	Tenergy 7.2V 3000mAh NiMH (2-pack)	Ordered
RC battery charger	1	$20.99	Amazon	Tenergy Universal RC Battery Charger	Ordered
3d-printed base board	1		STL file	Can be printed purchased at Donkey Car Store	Need to order
3d-printed camera mount	1		STL file	Can be printed purchased at Donkey Car Store	Need to order

Jig

Part	Quantity	Cost	URL	Notes	My Notes
3d-printed jig plate	1		STL file	to help drill holes on RC car chassis	Need to order

Electronics

Part	Quantity	Cost	URL	Notes	My Notes
PWM Servo Motor Driver	1	$6.99	Amazon		Ordered 2
RC Servo Multiplexer	1	$9.95	Pololu		Ordered 2
Servo Extension Cable Pack	1	$5.91	Amazon	Male to Male, 10cm	Ordered 2
Jumper Wire Pack	1	$6.98	Amazon	Female to Female, > 10cm	Ordered

Wi-Fi

Part	Quantity	Cost	URL	Notes	My Notes
Wi-Fi Card	1	$18.95	Amazon, NewEgg		Ordered
Wi-Fi Antenna kit	1	$8.99	Amazon	IPEX MHF4 connectors	Ordered

Camera

PLEASE READ - We already have a camera arriving. Need to check if the below listed cameras need to used. Mine is costlier but more versatile. Need to check if I need it.

You need a wide angle camera for JetRacer. Pick an option and order the parts listed.

Option 1 - Wide angle Leopard Imaging camera

Part	Quantity	Cost	URL	Notes
Camera	1	$29	Leopard Imaging	Select wide angle (H145) option

Option 2 - Raspberry Pi Camera V2 + Wide angle attachment

Part	Quantity	Cost	URL	Notes
Camera	1	$23.90	Amazon, Adafruit	Raspberry Pi Camera V2
Wide angle attachment	1	$18.99	Amazon(1), Amazon(2), eBay	160-degree FoV

Assembly Hardware

Part	Quantity	Cost	URL	Notes	My Notes
M3x45mm Standoff Pack	1	$10.69	Amazon	To support 3d-printed base plate	Ordered 2
M3 Universal Screw Pack	1	$12.94	Amazon	4x M3x8mm screws, 4x M3 flat head screws needed for 4 standoffs	Ordered
M2x8mm Screw Pack	1	$6.39	Amazon	Mounts accessories to 3D printed base plate. 18 screws needed per car	Ordered
Battery Strap Pack	1	$6.98	Amazon	1 needed per car	Ordered

Next

Follow the hardware setup.