crowsnest.conf_old

#### crowsnest.conf
#### This is a typical default config.
#### Also used as default in mainsail / MainsailOS
#### See:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#### for details to configure to your needs.


#####################################################################
####                                                            #####
####      Information about ports and according URL's           #####
####                                                            #####
#####################################################################
####                                                            #####
####    Port 8080 equals /webcam/?action=[stream/snapshot]      #####
####    Port 8081 equals /webcam2/?action=[stream/snapshot]     #####
####    Port 8082 equals /webcam3/?action=[stream/snapshot]     #####
####    Port 8083 equals /webcam4/?action=[stream/snapshot]     #####
####                                                            #####
####    Note: These ports are default for most Mainsail         #####
####    installations. To use any other port would involve      #####
####    changing the proxy configuration or using directly      #####
####    http://<ip>:<port>/?action=[stream/snapshot]            #####
####                                                            #####
#####################################################################
####    RTSP Stream URL: ( if enabled and supported )           #####
####    rtsp://<ip>:<rtsp_port>/stream.h264                     #####
#####################################################################


[crowsnest]
log_path: /home/spikeygg/printer_data/logs/crowsnest.log
log_level: debug                      # Valid Options are quiet/verbose/debug
delete_log: true                       # Deletes log on every restart, if set to true
no_proxy: true

[cam 1]
mode: camera-streamer                         # ustreamer - Provides mjpg and snapshots. (All devices)
                                       # camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
enable_rtsp: true                      # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8554                         # Set different ports for each device!
port: 8080                              # HTTP/MJPG Stream/Snapshot Port
#device: /dev/video0                     # See Log for available ...
device: /dev/v4l/by-id/usb-HD_Web_Camera_HD_Web_Camera_Ucamera001-video-index0
#resolution: 640x360                     # widthxheight format
resolution: 1280x720                     # widthxheight format
#resolution: 1920x1080                     # widthxheight format
max_fps: 30                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: --camera-force_active=1 --camera-height=360 --camera-width=640 --camera-video.height=360 --camera-snapshot.height=360
#custom_flags: --camera-force_active=1 --camera-height=360 --camera-width=640 --camera-video.height=360 --camera-snapshot.height=360 --camera-format=YUYV
#custom_flags: --camera-format=YUYV
#custom_flags:                          # You can run the Stream Services with custom flags.
#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.

[cam 2]
mode: ustreamer                         # ustreamer - Provides mjpg and snapshots. (All devices)
enable_rtsp: false                       # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8555                         # Set different ports for each device!
port: 8081                              # HTTP/MJPG Stream/Snapshot Port
device: /dev/v4l/by-id/usb-TSTC_USB20_WEB_CAMERA_TSTC_USB20_WEB_CAMERA_01.00.00-video-index0
resolution: 1280x720                     # widthxheight format
#resolution: 1920x1080                     # widthxheight format
max_fps: 30                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: --camera-force_active=1 --camera-height=720 --camera-width=1280 --camera-video.height=720 --camera-snapshot.height=720 --camera-format=YUYV
#custom_flags: --camera-format=YUYV

# [cam 3]
# mode: camera-streamer                         # ustreamer - Provides mjpg and snapshots. (All devices)
# enable_rtsp: true                       # If camera-streamer is used, this enables also usage of an rtsp server
# rtsp_port: 8556                         # Set different ports for each device!
# port: 8082                              # HTTP/MJPG Stream/Snapshot Port
# device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_543B45DF-video-index0
# resolution: 640x360                     # widthxheight format
##resolution: 1920x1080                     # widthxheight format
# max_fps: 30                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.