No hdmi on mangopi

[skypap]

Description

Steps to reproduce the issue:
1.Bake mango pi with default param
2. The board had no interraction with de hdmi port

Describe the results you expected:
I mean there should be some message from dmesg like
[sun20i_d1_hdmi_phy_enable]:tx_ready_status
etc...

am I missing something???

[kraj]

are you able to see login prompt on serial console ?

[skypap]

Sure

U-Boot SPL 2024.01-rc1 (Oct 31 2023 - 08:53:02 +0000)
mxstatus=0xc0408000 mhcr=0x0000010b m�
OpenSBI v1.4

---

/ __ \ / | _ _ |
| | | | __ ___ _ __ | ( | |) || |
| | | | '_ \ / _ \ '_ \ ___ | _ < | |
| || | |) | __/ | | |) | |) || |
_/| ./ _|| ||/|____/|
| |
|_|

Platform Name : MangoPi MQ Pro
Platform Features : medeleg
Platform HART Count : 1
Platform IPI Device : ---
Platform Timer Device : --- @ 0Hz
Platform Console Device : uart8250
Platform HSM Device : sun20i-d1-ppu
Platform PMU Device : thead,c900-pmu
Platform Reboot Device : sunxi-wdt-reset
Platform Shutdown Device : ---
Platform Suspend Device : ---
Platform CPPC Device : ---
Firmware Base : 0x40000000
Firmware Size : 323 KB
Firmware RW Offset : 0x40000
Firmware RW Size : 67 KB
Firmware Heap Offset : 0x48000
Firmware Heap Size : 35 KB (total), 2 KB (reserved), 9 KB (used), 24 KB )
Firmware Scratch Size : 4096 B (total), 312 B (used), 3784 B (free)
Runtime SBI Version : 2.0

Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000002500000-0x0000000002500fff M: (I,R,W) S/)
Domain0 Region01 : 0x0000000040040000-0x000000004005ffff M: (R,W) S/U:)
Domain0 Region02 : 0x0000000040000000-0x000000004003ffff M: (R,X) S/U:)
Domain0 Region03 : 0x0000000010000000-0x0000000013ffffff M: (I,R,W) S/)
Domain0 Region04 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R)
Domain0 Next Address : 0x0000000042e00000
Domain0 Next Arg1 : 0x0000000042e8d070
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Domain0 SysSuspend : yes

Boot HART ID : 0
Boot HART Domain : root
Boot HART Priv Version : v1.11
Boot HART Base ISA : rv64imafdcvx
Boot HART ISA Extensions : zicntr,zihpm
Boot HART PMP Count : 8
Boot HART PMP Granularity : 11 bits
Boot HART PMP Address Bits: 38
Boot HART MHPM Info : 12 (0x0003e3f8)
Boot HART MIDELEG : 0x0000000000020222
Boot HART MEDELEG : 0x000000000000b109

U-Boot 2024.01-rc1 (Oct 31 2023 - 08:53:02 +0000) Allwinner Technology

DRAM: 1 GiB
Core: 48 devices, 20 uclasses, devicetree: separate
WDT: Started watchdog@6011000 with servicing every 1000ms (16s timeout)
MMC: mmc@4020000: 0, mmc@4021000: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial@2500000
Out: serial@2500000
Err: serial@2500000
Net: No ethernet found.
starting USB...
Bus usb@4200000: USB EHCI 1.00
Bus usb@4200400: USB OHCI 1.0
scanning bus usb@4200000 for devices... 1 USB Device(s) found
scanning bus usb@4200400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr.uimg
1249 bytes read in 1 ms (1.2 MiB/s)

Executing script at 41900000

No ethernet found.
No ethernet found.
No ethernet found.
322 bytes read in 2 ms (157.2 KiB/s)
6608539 bytes read in 1094 ms (5.8 MiB/s)

Loading kernel from FIT Image at 41c00000 ...

Using 'conf-1' configuration
Trying 'kernel-1' kernel subimage
Description: Linux kernel
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x41c00104
Data Size: 6605364 Bytes = 6.3 MiB
Architecture: RISC-V
OS: Linux
Load Address: 0x40200000
Entry Point: 0x40200000
Hash algo: sha256
Hash value: fa8ccd6c2dec8defa0055af5e374614034da4297ff27f1737d12d5c70d6c4
Verifying Hash Integrity ... sha256+ OK

Flattened Device Tree blob at 7fd2e600

Booting using the fdt blob at 0x7fd2e600
Working FDT set to 7fd2e600
Uncompressing Kernel Image
Loading Device Tree to 0000000042df3000, end 0000000042dff7af ... OK
Working FDT set to 42df3000

Starting kernel ...

[ 0.000000] Linux version 6.1.0-rc3-mangopi (oe-user@oe-host) (riscv64-poky-2
[ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[ 0.000000] Machine model: MangoPi MQ Pro
[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[ 0.000000] printk: bootconsole [sbi0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000040200000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000007fffffff]
[ 0.000000] SBI specification v2.0 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x10004
[ 0.000000] SBI TIME extension detected
[ 0.000000] SBI IPI extension detected
[ 0.000000] SBI RFENCE extension detected
[ 0.000000] SBI SRST extension detected
[ 0.000000] riscv: base ISA extensions acdfim
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544
[ 0.000000] Kernel command line: earlycon=sbi clk_ignore_unused initcall_debt
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, l)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] Memory: 1005876K/1046528K available (8122K kernel code, 5712K rw)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: interrupt-controller@10000000: mapped 175 interrupts with .
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, maxs
[ 0.000000] riscv-timer: riscv_timer_init_dt: Registering clocksource cpuid ]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycs
[ 0.000001] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398s
[ 0.008373] Console: colour dummy device 80x25
[ 0.012861] Calibrating delay loop (skipped), value calculated using timer f)
[ 0.023128] pid_max: default: 32768 minimum: 301
[ 0.027918] LSM: Security Framework initializing
[ 0.032664] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, lin)
[ 0.040036] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.050642] cblist_init_generic: Setting adjustable number of callback queue.
[ 0.057859] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.064145] riscv: ELF compat mode unsupported
[ 0.064199] ASID allocator using 16 bits (65536 entries)
[ 0.074168] rcu: Hierarchical SRCU implementation.
[ 0.078935] rcu: Max phase no-delay instances is 1000.
[ 0.084462] EFI services will not be available.
[ 0.089576] devtmpfs: initialized
[ 0.102581] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[ 0.112334] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[ 0.119183] pinctrl core: initialized pinctrl subsystem
[ 0.126327] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.132678] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.139737] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic as
[ 0.148512] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.148528] thermal_sys: Registered thermal governor 'step_wise'
[ 0.154489] thermal_sys: Registered thermal governor 'user_space'
[ 0.160823] cpuidle: using governor menu
[ 0.183682] platform 5460000.tcon-top: Fixing up cyclic dependency with 5200r
[ 0.191632] platform 5460000.tcon-top: Fixing up cyclic dependency with 5100r
[ 0.200143] platform 5461000.lcd-controller: Fixing up cyclic dependency witp
[ 0.209398] platform 5470000.lcd-controller: Fixing up cyclic dependency witp
[ 0.219834] platform 7090000.rtc: Fixing up cyclic dependency with 7010000.cr
[ 0.392416] raid6: int64x8 gen() 352 MB/s
[ 0.536419] raid6: int64x4 gen() 442 MB/s
[ 0.665244] raid6: int64x2 gen() 402 MB/s
[ 0.736511] raid6: int64x1 gen() 344 MB/s
[ 0.740736] raid6: using algorithm int64x4 gen() 442 MB/s
[ 0.812480] raid6: .... xor() 303 MB/s, rmw enabled
[ 0.817311] raid6: using intx1 recovery algorithm
[ 0.825796] iommu: Default domain type: Translated
[ 0.830642] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.837417] SCSI subsystem initialized
[ 0.841515] usbcore: registered new interface driver usbfs
[ 0.847054] usbcore: registered new interface driver hub
[ 0.852426] usbcore: registered new device driver usb
[ 0.857774] mc: Linux media interface: v0.10
[ 0.862079] videodev: Linux video capture interface: v2.00
[ 0.868757] Advanced Linux Sound Architecture Driver Initialized.
[ 0.875984] clocksource: Switched to clocksource timer
[ 0.920777] NET: Registered PF_INET protocol family
[ 0.932374] IP idents hash table entries: 16384 (order: 5, 131072 bytes, lin)
[ 0.956621] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096)
[ 0.972049] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,)
[ 0.988068] TCP established hash table entries: 8192 (order: 4, 65536 bytes,)
[ 1.004131] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linea)
[ 1.016491] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.032165] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.044083] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.056294] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.072118] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 1.108285] SGI XFS with ACLs, security attributes, no debug enabled
[ 1.193884] NET: Registered PF_ALG protocol family
[ 1.198655] xor: measuring software checksum speed
[ 1.209105] 8regs : 1762 MB/sec
[ 1.219006] 8regs_prefetch : 1761 MB/sec
[ 1.228903] 32regs : 1765 MB/sec
[ 1.238806] 32regs_prefetch : 1759 MB/sec
[ 1.243104] xor: using function: 32regs (1765 MB/sec)
[ 1.248222] async_tx: api initialized (async)
[ 1.252876] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[ 1.289403] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.307176] zram: Added device: zram0
[ 1.314150] usbcore: registered new interface driver r8152
[ 1.320535] usbcore: registered new interface driver uas
[ 1.325956] usbcore: registered new interface driver usb-storage
[ 1.332148] usbcore: registered new interface driver ch341
[ 1.337651] usbserial: USB Serial support registered for ch341-uart
[ 1.344545] UDC core: g_cdc: couldn't find an available UDC
[ 1.352678] sun6i-rtc 7090000.rtc: registered as rtc0
[ 1.357814] sun6i-rtc 7090000.rtc: setting system clock to 1970-01-02T00:00:)
[ 1.366266] sun6i-rtc 7090000.rtc: RTC enabled
[ 1.371044] i2c_dev: i2c /dev entries driver
[ 1.377233] sunxi-wdt 6011000.watchdog: Watchdog enabled (timeout=16 sec, no)
[ 1.386131] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-m
[ 1.395581] cpuidle-riscv-sbi: idle driver registered for all CPUs
[ 1.403048] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.409288] sun8i-ce 3040000.crypto: Set mod clock to 300000000 (300 Mhz) fr)
[ 1.418629] sun8i-ce 3040000.crypto: will run requests pump with realtime pry
[ 1.426408] sun8i-ce 3040000.crypto: will run requests pump with realtime pry
[ 1.434180] sun8i-ce 3040000.crypto: will run requests pump with realtime pry
[ 1.441966] sun8i-ce 3040000.crypto: will run requests pump with realtime pry
[ 1.449639] sun8i-ce 3040000.crypto: Register cbc(aes)
[ 1.454778] sun8i-ce 3040000.crypto: Register ecb(aes)
[ 1.459970] sun8i-ce 3040000.crypto: Register cbc(des3_ede)
[ 1.465583] sun8i-ce 3040000.crypto: Register ecb(des3_ede)
[ 1.471223] sun8i-ce 3040000.crypto: Register md5
[ 1.476021] sun8i-ce 3040000.crypto: Register sha1
[ 1.480850] sun8i-ce 3040000.crypto: Register sha224
[ 1.485875] sun8i-ce 3040000.crypto: Register sha256
[ 1.490902] sun8i-ce 3040000.crypto: Register sha384
[ 1.495927] sun8i-ce 3040000.crypto: Register sha512
[ 1.500966] sun8i-ce 3040000.crypto: Register stdrng
[ 1.506813] sun8i-ce 3040000.crypto: CryptoEngine Die ID 0
[ 1.512844] usbcore: registered new interface driver usbhid
[ 1.518680] random: crng init done
[ 1.522057] usbhid: USB HID core driver
[ 1.527412] riscv-pmu-sbi: SBI PMU extension is available
[ 1.532828] riscv-pmu-sbi: 16 firmware and 14 hardware counters
[ 1.540390] usbcore: registered new interface driver snd-usb-audio
[ 1.549953] NET: Registered PF_INET6 protocol family
[ 1.556693] Segment Routing with IPv6
[ 1.560442] In-situ OAM (IOAM) with IPv6
[ 1.564483] NET: Registered PF_PACKET protocol family
[ 1.570397] Key type .fscrypt registered
[ 1.574319] Key type fscrypt-provisioning registered
[ 1.581491] Key type encrypted registered
[ 1.636509] sun20i-d1-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[ 1.644702] printk: console [ttyS0] disabled
[ 1.678136] printk: console [ttyS0] enabledx2500000 (irq = 206, base_baud = A
[ 1.678136] printk: console [ttyS0] enabled
[ 1.686497] printk: bootconsole [sbi0] disabled
[ 1.686497] printk: bootconsole [sbi0] disabled
[ 1.717910] 2500400.serial: ttyS1 at MMIO 0x2500400 (irq = 207, base_baud = A
[ 1.727088] serial serial0: tty port ttyS1 registered
[ 1.733597] ehci-platform 4200000.usb: EHCI Host Controller
[ 1.740905] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allows
[ 1.750967] ohci-platform 4200400.usb: Generic Platform OHCI controller
[ 1.757726] ehci-platform 4200000.usb: new USB bus registered, assigned bus 1
[ 1.765555] ohci-platform 4200400.usb: new USB bus registered, assigned bus 2
[ 1.774199] ehci-platform 4200000.usb: irq 208, io mem 0x04200000
[ 1.780902] using random self ethernet address
[ 1.785617] ohci-platform 4200400.usb: irq 209, io mem 0x04200400
[ 1.791798] using random host ethernet address
[ 1.797520] usb0: HOST MAC 96:c3:f4:fa:71:94
[ 1.801855] usb0: MAC 5a:ab:0e:3f:1a:a6
[ 1.805782] g_cdc gadget.0: CDC Composite Gadget, version: King Kamehameha D8
[ 1.813525] ehci-platform 4200000.usb: USB 2.0 started, EHCI 1.00
[ 1.819943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b1
[ 1.828275] g_cdc gadget.0: g_cdc ready
[ 1.832199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 1.842253] clk: Not disabling unused clocks
[ 1.849797] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
[ 1.855373] sunxi-mmc 4020000.mmc: Got CD GPIO
[ 1.863974] ALSA device list:
[ 1.866996] No soundcards found.
[ 1.870780] usb usb1: Product: EHCI Host Controller
[ 1.876477] usb usb1: Manufacturer: Linux 6.1.0-rc3-mangopi ehci_hcd
[ 1.883013] usb usb1: SerialNumber: 4200000.usb
[ 1.888758] hub 1-0:1.0: USB hub found
[ 1.892670] hub 1-0:1.0: 1 port detected
[ 1.896692] sunxi-mmc 4021000.mmc: initialized, max. request size: 2047 KB, e
[ 1.907228] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, b1
[ 1.915859] sunxi-mmc 4020000.mmc: initialized, max. request size: 2047 KB, e
[ 1.925067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 1.933481] usb usb2: Product: Generic Platform OHCI controller
[ 1.939583] usb usb2: Manufacturer: Linux 6.1.0-rc3-mangopi ohci_hcd
[ 1.946021] usb usb2: SerialNumber: 4200400.usb
[ 1.950628] sunxi-mmc 4021000.mmc: card claims to support voltages below defe
[ 1.959556] hub 2-0:1.0: USB hub found
[ 1.963491] hub 2-0:1.0: 1 port detected
[ 1.968607] md: Waiting for all devices to be available before autodetect
[ 1.975685] md: If you don't use raid, use raid=noautodetect
[ 1.981451] md: Autodetecting RAID arrays.
[ 1.985631] md: autorun ...
[ 1.988505] md: ... autorun DONE.
[ 1.991886] Waiting for root device /dev/mmcblk0p2...
[ 2.014590] mmc1: new high speed SDIO card at address 0001
[ 2.040027] mmc0: new high speed SDXC card at address aaaa
[ 2.046615] mmcblk0: mmc0:aaaa SN64G 59.5 GiB
[ 2.053407] mmcblk0: p1 p2
[ 2.079469] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesysm
[ 2.086836] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 2.909716] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ 2.920251] EXT4-fs (mmcblk0p2): recovery complete
[ 2.928467] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. .
[ 2.937467] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 2.945343] devtmpfs: mounted
[ 2.949907] Freeing unused kernel image (initmem) memory: 2156K
[ 2.955930] Run /sbin/init as init process
[ 2.960074] with arguments:
[ 2.963046] /sbin/init
[ 2.965778] with environment:
[ 2.968946] HOME=/
[ 2.971311] TERM=linux
[ 3.821402] systemd[1]: System time before build time, advancing clock.
[ 3.890910] systemd[1]: systemd 255.1^ running in system mode (+PAM -AUDIT -)
[ 3.922853] systemd[1]: Detected architecture riscv64.

Welcome to Poky (Yocto Project Reference Distro) 4.3+snapshot-25d60ac6f61cc186b!

[ 3.960850] systemd[1]: Hostname set to .
[ 5.497731] systemd[1]: Queued start job for default target Multi-User Syste.
[ 5.564825] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ 5.593029] systemd[1]: Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/modprobe.
[ 5.621049] systemd[1]: Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/serial-getty.
[ 5.647913] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 5.669079] systemd[1]: Started Dispatch Password Requests to Console Direct.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 5.697076] systemd[1]: Started Forward Password Requests to Wall Directory .
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 5.720786] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 5.740545] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 5.764549] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 5.784621] systemd[1]: Reached target Swaps.
[ OK ] Reached target Swaps.
[ 5.806502] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 5.832546] systemd[1]: Reached target RPC Port Mapper.
[ OK ] Reached target RPC Port Mapper.
[ 5.854106] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 5.873195] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 5.913473] systemd[1]: Journal Audit Socket was skipped because of an unmet.
[ 5.925994] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 5.949994] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 5.970114] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 5.995453] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 6.017825] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 6.041893] systemd[1]: Listening on User Database Manager Socket.
[ OK ] Listening on User Database Manager Socket.
[ 6.065738] systemd[1]: Huge Pages File System was skipped because of an unm.
[ 6.079520] systemd[1]: POSIX Message Queue File System was skipped because .
[ 6.108369] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 6.164417] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 6.223262] systemd[1]: Mounting Temporary Directory /tmp...
Mounting Temporary Directory /tmp...
[ 6.305020] systemd[1]: Starting Create List of Static Device Nodes...
Starting Create List of Static Device Nodes...
[ 6.380964] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 6.452998] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 6.537028] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 6.598268] systemd[1]: Starting Start psplash boot splash screen...
Starting Start psplash boot splash screen...
[ 6.693109] systemd[1]: Starting RPC Bind...
Starting RPC Bind...
[ 6.765013] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 6.806077] systemd[1]: systemd-journald.service: unit configures an IP fire.
[ 6.873243] systemd[1]: systemd-journald.service: (This warning is only show)
[ 6.954738] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 7.037081] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 7.109060] systemd[1]: Starting Generate network units from Kernel command .
Starting Generate network units from Kernel command line...
[ 7.209005] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 7.339949] systemd[1]: Started RPC Bind.
[ OK ] Started RPC Bind.
[ 7.381006] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted 7.413817] systemd[1]: Mounted Kernel Trace File System.
1;39mKernel Debug File System.
[ OK ] Mounted 7.469734] systemd[1]: Mounted Temporary Directory /tmp.
1;39mKernel Trace File System.
[ OK ] Mounted Temporary Directory /tmp.
[ 7.534233] systemd[1]: Finished Create List of Static Device Nodes.
[ OK ] Finished Create List of Static Device Nodes.
[ 7.592987] systemd[1]: [email protected]: Deactivated successfully.
[ 7.648355] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 7.692836] systemd[1]: [email protected]: Deactivated successfully.
[ 7.710020] systemd[1]: Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module drm.
[ 7.743783] systemd[1]: [email protected]: Deactivated successfully.
[ 7.761956] systemd[1]: Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Module fuse.
[ 7.794404] systemd[1]: psplash-start.service: Main process exited, code=exiN
[ 7.834180] systemd[1]: psplash-start.service: Failed with result 'exit-code.
[ 7.876322] systemd[1]: Failed to start Start psplash boot splash screen.
[FAILED] Failed to start Start psplash boot splash screen.
See 'systemctl status psplash-start.service' for details.
[ 7.940245] systemd[1]: Dependency failed for Start psplash-systemd progress.
[DEPEND] Dependency failed for Start psplas…temd progress communication helper.
[ 7.992237] systemd[1]: psplash-systemd.service: Job psplash-systemd.service.
[ 8.036331] systemd[1]: Finished File System Check on Root Device.
[ OK ] Finished File System Check on Root Device.
[ 8.079066] systemd[1]: Finished Generate network units from Kernel command .
[ OK ] Finished Generate network units from Kernel command line.
[ 8.127668] systemd[1]: Reached target Preparation for Network.
[ 8.134514] systemd-journald[124]: Collecting audit messages is disabled.
[ OK ] Reached target Preparation for Network.
[ 8.169530] systemd[1]: FUSE Control File System was skipped because of an u.
[ 8.272447] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System...
[ 8.352935] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 8.449002] systemd[1]: Starting Create Static Device Nodes in /dev graceful.
Starting Create Static Device Nodes in /dev gracefully...
[ 8.661319] systemd[1]: Mounted Kernel Configuration File System.
[ OK ] Mounted Kernel Configuration File System.
[ 9.017712] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: disabled.
[ 9.116271] systemd[1]: Finished Remount Root and Kernel File Systems.
[ OK ] Finished Remount Root and Kernel File Systems.
[ 9.173138] systemd[1]: Rebuild Hardware Database was skipped because of an .
[ 9.266649] systemd[1]: Finished Create Static Device Nodes in /dev graceful.
[ OK ] Finished Create Static Device Nodes in /dev gracefully.
[ 9.317415] systemd[1]: Create System Users was skipped because no trigger c.
[ 9.388899] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 9.477099] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
Mounting /var/volatile...
Starting Rule-based Manager for Device Events and Files...
[ 10.260899] systemd-journald[124]: Received client request to flush runtime .
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Mounted /var/volatile.
Starting Load/Save OS Random Seed...
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ 11.224690] 8723ds: loading out-of-tree module taints kernel.
[ OK ] Finished Load/Save OS Random Seed.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Starting User Database Manager...
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Started User Database Manager.
[ OK ] Reached target Hardware activated USB gadget.
Starting Virtual Console Setup...
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Set.
[ OK ] Finished Virtual Console Setup.
[ 20.205874] Bluetooth: Core ver 2.22
[ 20.222935] NET: Registered PF_BLUETOOTH protocol family
[ 20.240044] Bluetooth: HCI device and connection manager initialized
[ 20.256062] Bluetooth: HCI socket layer initialized
[ 20.276049] Bluetooth: L2CAP socket layer initialized
[ 20.292101] Bluetooth: SCO socket layer initialized
[ 20.326366] Bluetooth: HCI UART driver ver 2.3
[ 20.343950] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 21.102580] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=3
[ 21.115021] Bluetooth: hci0: RTL: rom_version status=0 version=2
[ 21.121159] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723ds_fw.bin
[ 21.127458] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723ds_fw.bin2
[ 21.138841] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8723ds_fw.bin not d
Starting Load/Save RF Kill Switch Status...
Starting Load Kernel Module fuse...
Starting Start psplash boot splash screen...
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Finished Load Kernel Module fuse.
[FAILED] Failed to start Start psplash boot splash screen.
See 'systemctl status psplash-start.service' for details.
[DEPEND] Dependency failed for Start psplas…temd progress communication helper.
Starting Load/Save RF Kill Switch Status...
[ OK ] Finished Load Kernel Modules.
Starting Apply Kernel Variables...
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timer Units.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Socket Units.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
Starting Bluetooth service...
[ OK ] Started Kernel Logging Service.
[ OK ] Started System Logging Service.
Starting D-Bus System Message Bus...
Starting User Login Management...
Starting Network Configuration...
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Bluetooth service.
[ OK ] Reached target Bluetooth Support.
Starting Hostname Service...
[ OK ] Started User Login Management.
[ OK ] Started Network Configuration.
[ OK ] Reached target Network.
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on hvc0.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
Starting Record Runlevel Change in UTMP...
[ OK ] Started Hostname Service.
[ OK ] Finished Record Runlevel Change in UTMP.
[ 35.789589] fbcon: Taking over console

Poky (Yocto Project Reference Dis
Poky (Yocto Projtro) 4.3+snapshot-25d60ac6f61cc186b4c5a961554bee583736fd17 mang0

mangopi-mq-pro login: ect Reference Distro) 4.3+snapshot-25d60ac6f61cc186b4c5a90

mangopi-mq-pro login:

I hope I didnt do anything stupid :S

[kraj]

perhaps look into device tree and check if hdmi is enabled or not.