/run.sh: line 8: /usr/bin/flicd: No such file or directory

[peravn]

I've been running flic buttons for 2 years, with occasional need to reboot because of flic buttons were "disconnected". Then about two weeks ago all buttons went off-line - not even flashing red when pushing the buttons.
I found in the flicd log the following statement "/run.sh: line 8: /usr/bin/flicd: No such file or directory", and found that the flicd is not starting up.

I've tried reinstall but no change. I also saw on other report of this where the recommendation was to try aarch64.
However it has been working on the same hardware for years.
Please help.

SW:
Core. 2024.5.3
Supervisor 2024.05.1
Operating System12.3
Frontend 20240501.1

HW:
Raspberry Pi 3 (32-bit)
Home Assistant SkyConnect
(No USB bluetooth dongles attached

[DragonSorcerer]

Just returned from holiday, updated everything and now I have exactly the same issue (after years of working without issue)

Raspberry Pi 3 (32-bit) without any dongles
Core 2024.5.5
Supervisor 2024.05.1
Operating System 12.3
Frontend 20240501.1

flicd log...
Available HCI devices found:
hci0

Trying hci0
hci0 is busy, shutting down and retrying...
Successfully bound HCI socket
Flic server is now up and running!
Initialization of Bluetooth controller done!
Accepted new client
Received signal 15
A client was disconnected
Exited
/run.sh: line 8: /usr/bin/flicd: No such file or directory
(the last line appears multiple times but that might be because I've tried restarting the addon)