Enable titan one by one

[sykp241095]

Original author: gary
Original time: 2024-03-24 13:16:19.898868
Original ID/Slug: 812 / enable-titan-one-by-one

version:tidb 7.5.0

I tried to enable titan:

  <a href="https://docs.pingcap.com/tidb/stable/titan-configuration/" target="_blank" rel="noopener nofollow ugc">docs.pingcap.com</a>

Titan Configuration

Learn how to configure Titan.

tikv:
rocksdb.titan.enabled: true
it looks it’s for all tikv instance.
currently there are 3 tikv node.
I’d try to enable titan on 1 tikv node only and watch the performance.
is it possible ? I tried to enable it in configure file:
tikv_servers:

• host: 10.10.1.150
  ssh_port: 22
  port: 20160
  status_port: 20180
  deploy_dir: /tidb-deploy/tikv-20160
  data_dir: /tidb-data/tikv-20160
  log_dir: /tidb-deploy/tikv-20160/log
  config:
  rocksdb.titan.enabled: true
  arch: amd64
  os: linux

i.e., try to enable titan for 10.10.1.150 1st, but looks ignored ?

[sykp241095]

Original author: TiDB-AI-Assistant
Original time: 2024-03-24 13:16:30.363018

To enable Titan on a specific TiKV node individually, you can follow these steps:

1. Edit the Configuration File: You need to edit the TiKV configuration file for the specific TiKV node where you want to enable Titan. The configuration should be set as follows:

   [rocksdb.titan]
   enabled = true
   

   This configuration change will enable Titan on the specified TiKV node.

2. Reload the Configuration: After editing the configuration file, you need to reload the configuration for the TiKV node. If you are using TiUP to manage your TiDB cluster, you can reload the configuration dynamically by executing the following command:

   tiup cluster reload ${cluster-name} -R tikv
   

   This command will apply the configuration changes without restarting the entire cluster.

By following these steps, you should be able to enable Titan on a specific TiKV node without affecting the other nodes in the cluster. This approach allows you to test the performance impact of Titan on a single node before enabling it cluster-wide.

[sykp241095]

Original author: gary
Original time: 2024-03-24 13:24:26.885791

TiDB AI Assistant:

Edit the Configuration File

how to ? where is the “TiKV configuration file for the specific TiKV node” location ?

[sykp241095]

Original author: TiDB-AI-Assistant
Original time: 2024-03-24 13:24:39.022158

To edit the TiKV configuration file for a specific TiKV node to enable Titan, you can follow these steps:

1. Locate the Configuration File:

   • The TiKV configuration file is typically located in the directory specified by the deploy_dir parameter for the TiKV node. In your case, the deploy_dir for the TiKV node with the IP address 10.10.1.150 is /tidb-deploy/tikv-20160.
   • Within the specified deploy_dir, you should find a configuration file named tikv.toml or similar. This file contains the configuration settings for the TiKV node.

2. Edit the Configuration File:

   • Open the tikv.toml file using a text editor.
   • Add the following configuration to enable Titan for the specific TiKV node:

     [rocksdb.titan]
     enabled = true
     

   • Save the file after adding this configuration.

3. Reload the Configuration:

   • After editing the configuration file, you need to reload the configuration for the TiKV node. You can use TiUP to reload the configuration dynamically as mentioned earlier:

     tiup cluster reload ${cluster-name} -R tikv
     

   • This command will apply the configuration changes without restarting the entire cluster.

By following these steps, you can locate and edit the TiKV configuration file for the specific TiKV node to enable Titan as desired.

[sykp241095]

Original author: gary
Original time: 2024-03-24 13:47:21.123779

great answer!

however, although

TiDB AI Assistant:

This command will apply the configuration changes without restarting the entire cluster.

in my case, the command restarted all tikv nodes ! while it should be ok.

[sykp241095]

Original author: TiDB-AI-Assistant
Original time: 2024-03-24 13:47:38.344617

It seems like there might have been a misunderstanding regarding the behavior of the tiup cluster reload command in your case. Let's clarify:

• Behavior of tiup cluster reload:

  When you execute the tiup cluster reload command with the -R tikv option, it is intended to reload the configuration for the TiKV nodes without restarting the entire cluster. This should apply the configuration changes dynamically to the specified components only.

• Possible Reasons for TiKV Node Restart:

  If all TiKV nodes were restarted after running the command, there could be a few reasons for this unexpected behavior:

  • There might have been a misconfiguration or issue in the TiKV configuration files that triggered a restart of the nodes.
  • There could be a bug or unexpected behavior in the TiUP tool that caused the unintended restart of the TiKV nodes.

• Next Steps:

  To investigate further and prevent unintended restarts of TiKV nodes, you may consider:

  • Reviewing the logs and output of the tiup cluster reload command to see if there are any error messages or warnings that indicate the reason for the node restarts.
  • Double-checking the configuration changes made to ensure they are correctly applied and do not trigger node restarts.
  • Consulting the TiDB documentation or community forums for any known issues or best practices related to dynamic configuration reloading with TiUP.

If you encounter any difficulties or need further assistance, feel free to provide more details, and I'll do my best to help you resolve the issue.