Sync with RT-Thread/rt-thread@de6d7ec

- FinSH is retired by upstream
- Upgrade FatFs from R0.13c to R0.14b
- Tested with Arduino DUE

Author: onelife

examples/FinSH/FinSH.ino

@@ -6,66 +6,27 @@
 #include <rtt.h>
 
 /* ATTENTION
-    Please append your new shell commands and variables to "shell_cmd.h" and
-    "shell_var.h".
+    - Please enable "CONFIG_USING_FINSH" in "rtconfig.h"
+    - Please add new shell commands to "shell_cmd.h".
  */
 
 /* NOTES
-    When using FinSH without MSH (CONFIG_USING_FINSH == 1 &&
-    CONFIG_USING_MSH == 0):
-    - please append the following line to "shell_cmd.h":
-      ADD_FINSH_CMD(led, Turn on/off builtin LED, led, rt_uint32_t, rt_uint32_t id, rt_uint8_t state)
-    - and append the following 2 lines to "shell_var.h"
-      ADD_SHELL_VAR(id, LED ID, led_id, finsh_type_uint)
-      ADD_SHELL_VAR(state, LED state, led_state, finsh_type_uchar)
-
-    After uploaded, please send the following command through "Serial Monitor"
-    and observe the output:
-    led(0, 1)
-    led(0, 0)
-    led(id, state)
-    state
-    state=0
-    led(id, state)
- */
-
-/* NOTES
-    When using FinSH with MSH (default, CONFIG_USING_FINSH == 1 &&
-    CONFIG_USING_MSH == 1):
-    - please append the following line to "shell_cmd.h":
-      ADD_MSH_CMD(led, Turn on/off builtin LED, led, int, int argc, char **argv)
-    - due to MSH doesn't support shell variables, "ADD_SHELL_VAR" has no effect
-
-    After uploaded, please send the following command through "Serial Monitor"
-    and observe the output:
-    led 0, 1, 2
-    led 1, 1
-    led 0, 1
+    - Using "MSH_CMD_EXPORT_ALIAS" macro to export shell command with the following format:
+      MSH_CMD_EXPORT_ALIAS(function_name, command_name, command description)
+    - Using "ADD_MSH_CMD" macro to add shell command to system with the following format:
+      ADD_MSH_CMD(function_name)
+    - Please insert the following line to "shell_cmd.h":
+      ADD_MSH_CMD(led)
+
+    After uploaded, please send the following command through "Serial Monitor" and observe the output:
+    led 0 1 2
+    led 1 1
+    led 0 1
  */
 
 extern "C" {
 
-#if !CONFIG_USING_MSH
-
-  rt_uint32_t led_id = 0;
-  rt_uint32_t led_state = 1;
-
-  rt_uint32_t led(rt_uint32_t id, rt_uint32_t state) {
-    rt_kprintf("led%d=%d\n", id, state);
-    if (id != 0) {
-      return 1;
-    }
-    if (state) {
-      digitalWrite(LED_BUILTIN, HIGH);
-    } else {
-      digitalWrite(LED_BUILTIN, LOW);
-    }
-    return 0;
-  }
-
-#else /* !CONFIG_USING_MSH */
-
-  int led(int argc, char **argv) {
+  int led_set(int argc, char **argv) {
     // argc - the number of arguments
     // argv[0] - command name, e.g. "led"
     // argv[n] - nth argument in the type of char array
@@ -93,10 +54,8 @@ extern "C" {
     }
     return 0;
   }
-
-#endif
-
 }
+MSH_CMD_EXPORT_ALIAS(led_set, led, Turn on/off builtin LED.);
 
 void setup() {
   pinMode(LED_BUILTIN, OUTPUT);

examples/HelloMo/hello_mo.c

@@ -19,13 +19,13 @@ int say_hello(unsigned char argc, char **argv) {
 }
 
 void module_init(void *param) {
-    rt_dlmodule_t *self = (rt_dlmodule_t *)param;
+    struct rt_dlmodule *self = (struct rt_dlmodule *)param;
 
     rt_kprintf("%s init\n", self->parent.name);
 }
 
 void module_cleanup(void *param) {
-    rt_dlmodule_t *self = (rt_dlmodule_t *)param;
+    struct rt_dlmodule *self = (struct rt_dlmodule *)param;
 
     rt_kprintf("%s cleanup\n", self->parent.name);
 }

examples/HelloMo/load_mo.c

@@ -6,7 +6,7 @@
 #include "mo.h"
 
 int load_hello(unsigned char argc, char **argv) {
-    rt_dlmodule_t *hello;
+    struct rt_dlmodule *hello;
     int (*say_hello)(unsigned char argc, char **argv);
     char *param[2];
     (void)argc;

keywords.txt

@@ -56,7 +56,6 @@ rt_thread_mdelay			KEYWORD2
 rt_thread_control			KEYWORD2
 rt_thread_suspend			KEYWORD2
 rt_thread_resume			KEYWORD2
-rt_thread_timeout			KEYWORD2
 rt_thread_sleep				KEYWORD2
 
 #######################################

library.properties

@@ -1,5 +1,5 @@
 name=RT-Thread
-version=0.9.4
+version=1.0.0
 author=onelife <[email protected]>, Bernard Xiong <[email protected]>
 maintainer=onelife <[email protected]>
 sentence=Real Time Operating System porting for Arduino SAM and SAMD boards

src/components/arduino/drv_iic_ft6206.cpp

@@ -150,6 +150,8 @@ static rt_err_t ft_read_data(struct bsp_ft_contex *ctx) {
             (CONFIG_GUI_WIDTH > x) ? CONFIG_GUI_WIDTH - x : 0,
             (CONFIG_GUI_HIGH > y) ? CONFIG_GUI_HIGH - y : 0);
     }
+    (void)x;
+    (void)y;
 
     return RT_EOK;
 }

src/components/arduino/drv_rtc.h

@@ -8,7 +8,7 @@
 
 /* Includes ------------------------------------------------------------------*/
 /* Exported defines ----------------------------------------------------------*/
-#define RTC_NAME                    "RTC"
+#define RTC_NAME                    "rtc"
 
 /* Exported types ------------------------------------------------------------*/
 struct bsp_rtc_contex {

src/components/arduino/drv_spiili.cpp

@@ -119,10 +119,11 @@ static const rt_uint8_t init_code[] = {
 static const struct rt_device_graphic_info disp_info = {
     .pixel_format   = RTGRAPHIC_PIXEL_FORMAT_RGB565,
     .bits_per_pixel = 16,
-    .reserved       = 0,
+    .pitch          = 0,
     .width          = CONFIG_GUI_WIDTH,
     .height         = CONFIG_GUI_HIGH,
     .framebuffer    = RT_NULL,
+    .smem_len       = 0,
 };
 
 static struct rtgui_graphic_driver_ops disp_ops = {

src/components/arduino/drv_spisd.cpp

@@ -939,13 +939,15 @@ rt_err_t bsp_hw_spiSd_init(void) {
  ******************************************************************************/
 #ifdef RT_USING_FINSH
 
-rt_err_t list_sd(void) {
+int list_sd(int argc, char **argv) {
     struct bsp_sd_contex *ctx = SD_CTX();
     rt_uint8_t buf_res[16];
     struct sd_register_cid *cid = (sd_register_cid *)buf_res;
     struct rt_device_blk_geometry geometry;
     rt_uint32_t temp;
-    rt_err_t ret;
+    int ret;
+    (void)argc;
+    (void)argv;
 
     if (RT_EOK != (ret = rt_device_open(&ctx->dev, RT_DEVICE_OFLAG_RDWR))) {
         rt_kprintf("Error: open failed!\n");
@@ -1008,7 +1010,7 @@ rt_err_t list_sd(void) {
 
     return RT_EOK;
 }
-FINSH_FUNCTION_EXPORT(list_sd, show SD information.)
+MSH_CMD_EXPORT(list_sd, Show SD information.)
 #endif /* RT_USING_FINSH */
 
 /***************************************************************************//**

src/components/dfs/filesystems/elmfat/00history.txt

@@ -328,3 +328,32 @@ R0.13c (October 14, 2018)
   Fixed creating a sub-directory in the fragmented sub-directory on the exFAT volume collapses FAT chain of the parent directory. (appeared at R0.12)
   Fixed f_getcwd() cause output buffer overrun when the buffer has a valid drive number. (appeared at R0.13b)
 
+
+
+R0.14 (October 14, 2019)
+  Added support for 64-bit LBA and GUID partition table (FF_LBA64 = 1)
+  Changed some API functions, f_mkfs() and f_fdisk().
+  Fixed f_open() function cannot find the file with file name in length of FF_MAX_LFN characters.
+  Fixed f_readdir() function cannot retrieve long file names in length of FF_MAX_LFN - 1 characters.
+  Fixed f_readdir() function returns file names with wrong case conversion. (appeared at R0.12)
+  Fixed f_mkfs() function can fail to create exFAT volume in the second partition. (appeared at R0.12)
+
+
+R0.14a (December 5, 2020)
+  Limited number of recursive calls in f_findnext().
+  Fixed old floppy disks formatted with MS-DOS 2.x and 3.x cannot be mounted.
+  Fixed some compiler warnings.
+
+
+
+R0.14b (April 17, 2021)
+  Made FatFs uses standard library <string.h> for copy, compare and search instead of built-in string functions.
+  Added support for long long integer and floating point to f_printf(). (FF_STRF_LLI and FF_STRF_FP)
+  Made path name parser ignore the terminating separator to allow "dir/".
+  Improved the compatibility in Unix style path name feature.
+  Fixed the file gets dead-locked when f_open() failed with some conditions. (appeared at R0.12a)
+  Fixed f_mkfs() can create wrong exFAT volume due to a timing dependent error. (appeared at R0.12)
+  Fixed code page 855 cannot be set by f_setcp().
+  Fixed some compiler warnings.
+
+