Smart config not running on second device

[ollie1400]

PSK is recieved, but SSID was not recieved properly:

configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:8896
load:0x40080400,len:5828
entry 0x400806ac
Firmware version
0.1.0 Build time 1615030261
CPU frequency set to 80 MHz
initNVS
NVS OK
tryReadSSIDPW
SSID was:
pwd was: ********** (blanked out)
MAC Address: 7C:9E:BD:FB:EF:5C
Connecting to [E][WiFiSTA.cpp:124] begin(): SSID too long or missing!
.........................................
Failed to connect to WiFi
Failed to update RTC.
Powering on to take measurement
tryInitI2CAndDevices
BH1750 Advanced begin
tryInitI2CAndDevices: done
Taken measurements 1/5
Powering down for 120 seconds...