You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hi @neuberfran , I was able to get following:
i.MX BSP release based on Yocto -- it supports 5.4/5.10/5.15/6.1 kernels
we have i.MX kernel 5.10 for Yocto Hardkott and 5.15 kernel for Yocto Kirkstonec
rpmsg_lite was created to be binary compatible with Linux rpmsg so once the rpmsg is part of the Linux kernel it should work with the rpmsg_lite counterpart app. Hope it helped to address your question.
Hi,
This is the main project file:
https://gist.github.com/neuberfran/c3fc054a4640e809231ddc587947819a
As you can see in the photos linked below, it hangs on the following line:
rpmsg_lite_is_link_up
https://drive.google.com/drive/folders/1loIpXypW1lMcBy9CxSiIJeIbN0uWtkkL?usp=drive_link
Regarding the photos above, special attention should be paid to the result of the dmesg | grep -E "MU|rpmsg"
In one of the photos (in which I used warp7-m4 and zephyr 1.13 the compilation worked and the results for the above command were better
I'm sure my device tree is correct:
Can I run rpmsg-lite with Yocto Hardkott Or Kirkstone Or Only with NXP downstream kernel?
The text was updated successfully, but these errors were encountered: