Doesn't work...

[IdoPort1]

I have tried running your script as described in the README and it doesn't work (see image attached).
Moreover it tries to do the next days instead of the previous month, how can it be changed?

[nirizr]

Yes, it stopped working a few months back... probably because a change to the html forms by timewatch. Since I'm no longer using timewatch I didn't bother fixing it although it shouldn't be too difficult.
I'll happily accept PRs.

Regarding to month being populated, by default it the current month is assumed (use --month to change that) and a date offset is set to the 24th of the previous month (this is also configurable).

[Rommmmm]

Are you familiar with other working projects?

[nirizr]

Hi,
Unfortunately, no. If I had, I would've used it back when I needed this.

P.S.

Looking at the attached image again, this might be a logical flaw on my part.
I can make a stub at fixing it (or provide instructions) but I suspect, as this is more than 2 years old, other changes may be required.

[tobenary]

I have a working script for unfilled days. It might have a bug or two if you do punch in. But I can share it with you.

…

On Thu, 19 Mar 2020, 15:52 Nir, ***@***.***> wrote: Hi, Unfortunately, no. If I had, I would've used it back when I needed this. P.S. Looking at the attached image again, this might be a logical flaw on my part. I can make a stub at fixing it (or provide instructions) but I suspect, as this is more than 2 years old, other changes may be required. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#9 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AB5DO6W5Y4OPDF452HI4SLDRIIPSDANCNFSM4ESI3ZZQ> .

[Rommmmm]

i will be glad if you will share it with me. i can take a look and maybe help you finish it if you like

…

On Thu, Mar 19, 2020 at 11:52 PM tobenary ***@***.***> wrote: I have a working script for unfilled days. It might have a bug or two if you do punch in. But I can share it with you. On Thu, 19 Mar 2020, 15:52 Nir, ***@***.***> wrote: > Hi, > Unfortunately, no. If I had, I would've used it back when I needed this. > > P.S. > > Looking at the attached image again, this might be a logical flaw on my > part. > I can make a stub at fixing it (or provide instructions) but I suspect, as > this is more than 2 years old, other changes may be required. > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#9 (comment)>, or > unsubscribe > < https://github.com/notifications/unsubscribe-auth/AB5DO6W5Y4OPDF452HI4SLDRIIPSDANCNFSM4ESI3ZZQ > > . > — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#9 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AESY4PBXGPL6U3ZB67XB6KLRIKHYRANCNFSM4ESI3ZZQ> .

-- Sincerely, Roman Roberman

[tobenary]

The issue is with dates with 15+ at the start punch date and 11 gets + 9 instead of punching from 9 to 11 and then continiue.

note - this it my first code that I also based my idea on Nir's code, but it's working for me...

WARNING:timewatch:Skipping parameter not listed in config: daysoff
 40%|████      | 8/20 [00:07<00:13,  1.09s/it]WARNING:timewatch:Failed punching in 9 times on 2020-03-09
 55%|█████▌    | 11/20 [00:16<00:16,  1.78s/it]WARNING:timewatch:Failed punching in 9 times on 2020-03-12
100%|██████████| 20/20 [00:31<00:00,  1.05s/it]

[tobenary]

2fa2f73

[tobenary]

@Rommmmm
The new code is working for you?

[Rommmmm]

didn't had a chance to try it yet sorry was little bit busy will try it tomorrow

…

On Tue, Mar 24, 2020 at 6:26 PM tobenary ***@***.***> wrote: @Rommmmm <https://github.com/Rommmmm> The new code is working for you? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#9 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AESY4PE3I36ISY3YF5C6TZ3RJDNMPANCNFSM4ESI3ZZQ> .

-- Sincerely, Roman Roberman

[Rommmmm]

having weird issues with BS4 doesn't work no matter what Im doing :\ On Tue, Mar 24, 2020 at 7:49 PM Roman Robreman <romanroberman@gmail.com> wrote:

…

didn't had a chance to try it yet sorry was little bit busy will try it tomorrow On Tue, Mar 24, 2020 at 6:26 PM tobenary ***@***.***> wrote: > @Rommmmm <https://github.com/Rommmmm> > The new code is working for you? > > — > You are receiving this because you were mentioned. > Reply to this email directly, view it on GitHub > <#9 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AESY4PE3I36ISY3YF5C6TZ3RJDNMPANCNFSM4ESI3ZZQ> > . > -- Sincerely, Roman Roberman

-- Sincerely, Roman Roberman

[tobenary]

Worked for me on the 24/04/20 On Sun, Apr 19, 2020 at 10:11 AM Roman Roberman <notifications@github.com> wrote:

…

having weird issues with BS4 doesn't work no matter what Im doing :\ On Tue, Mar 24, 2020 at 7:49 PM Roman Robreman ***@***.***> wrote: > didn't had a chance to try it yet sorry was little bit busy will try it > tomorrow > > On Tue, Mar 24, 2020 at 6:26 PM tobenary ***@***.***> wrote: > >> @Rommmmm <https://github.com/Rommmmm> >> The new code is working for you? >> >> — >> You are receiving this because you were mentioned. >> Reply to this email directly, view it on GitHub >> <#9 (comment)>, >> or unsubscribe >> < https://github.com/notifications/unsubscribe-auth/AESY4PE3I36ISY3YF5C6TZ3RJDNMPANCNFSM4ESI3ZZQ > >> . >> > > > -- > Sincerely, > Roman Roberman > -- Sincerely, Roman Roberman — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#9 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AB5DO6U4ZWGRTANXG4PI763RNKPZRANCNFSM4ESI3ZZQ> .

-- ------------------------------ מי שנותן-מתמלא מי שלוקח-מתרוקן Tomer Ben-Arye