[STM32F3/G4/L4/H7] add ext. trigger and offset api

Author: Tecnologic

src/modm/platform/adc/stm32f3/adc.hpp.in

@@ -309,6 +309,14 @@ public:
 %% endif
 	};
 
+	enum class ExternalTriggerPolarity
+	{
+		NoTriggerDetection = 0x0u,
+		RisingEdge = 0x1u,
+		FallingEdge = 0x2u,
+		RisingAndFallingEdge = 0x3u,
+	};
+
 	enum class Interrupt : uint32_t
 	{
 		Ready 								= ADC_IER_ADRDYIE,
@@ -342,6 +350,57 @@ public:
 	};
 	MODM_FLAGS32(InterruptFlag);
 
+	/**
+	 * Enum mapping all events on a external trigger converter.
+	 * The source mapped to each event varies on controller family,
+	 * refer to the ADC external trigger section on reference manual
+	 * of your controller for more information
+	 */
+	enum class ExternalTriggerEvent
+	{
+		Event0 = 0x00u,
+		Event1 = 0x01u,
+		Event2 = 0x02u,
+		Event3 = 0x03u,
+		Event4 = 0x04u,
+		Event5 = 0x05u,
+		Event6 = 0x06u,
+		Event7 = 0x07u,
+		Event9 = 0x09u,
+		Event10 = 0x0Au,
+		Event11 = 0x0Bu,
+		Event12 = 0x0Cu,
+		Event13 = 0x0Du,
+		Event14 = 0x0Eu,
+		Event15 = 0x0Fu,
+%% if target["family"] in ["g4", "h7"]
+		Event16 = 0x10u,
+		Event17 = 0x11u,
+		Event18 = 0x12u,
+		Event19 = 0x13u,
+		Event20 = 0x14u,
+		Event21 = 0x15u,
+		Event22 = 0x16u,
+		Event23 = 0x17u,
+		Event24 = 0x18u,
+		Event25 = 0x19u,
+		Event26 = 0x1Au,
+		Event27 = 0x1Bu,
+		Event28 = 0x1Cu,
+		Event29 = 0x1Du,
+		Event30 = 0x1Eu,
+		Event31 = 0x1Fu,
+%% endif
+	};
+
+	enum class OffsetSlot : uint8_t
+	{
+		Slot0 = 0,
+		Slot1 = 1,
+		Slot2 = 2,
+		Slot3 = 3,
+	};
+
 public:
 	template< class... Signals >
 	static void
@@ -499,6 +558,23 @@ public:
 	static inline void
 	stopConversion();
 
+	/**
+	 * enable regular conversions on external trigger.
+	 *
+	 * @param externalTriggerPolarity
+	 * 		Polarity of the external trigger signal.
+	 * @param externalTriggerEvent
+	 * 		Regular conversion external trigger source.
+	 */
+	static inline void enableRegularConversionExternalTrigger(
+		ExternalTriggerPolarity externalTriggerPolarity,
+		ExternalTriggerEvent externalTriggerEvent);
+
+	/**
+	 * Disable regular conversions external trigger.
+	 */
+	static inline void disableRegularConversionExternalTrigger( void );
+
 	/**
 	 * @return If the conversion is finished.
 	 * @pre A conversion should have been started with startConversion()
@@ -539,6 +615,23 @@ public:
 	static inline bool
 	setInjectedConversionSequenceLength(uint8_t length);
 
+	/**
+	 * enable injected conversions on external trigger.
+	 *
+	 * @param externalTriggerPolarity
+	 * 		Polarity of the external trigger signal.
+	 * @param externalTriggerEvent
+	 * 		External trigger source.
+	 */
+	static inline void enableInjectedConversionExternalTrigger(
+		ExternalTriggerPolarity externalTriggerPolarity,
+		ExternalTriggerEvent externalTriggerEvent);
+
+	/**
+	 * Disable injected conversions external trigger.
+	 */
+	static inline void disableInjectedConversionExternalTrigger();
+
 	/**
 	 * @return If the injected conversion sequence is finished.
 	 * @pre An injected conversion should have been started with startInjectedConversionSequence()
@@ -585,6 +678,76 @@ public:
 		}
 	}
 
+%% if target["family"] in ["f3", "l4", "l5"] or (target["family"] in ["h7"] and resolution == 16):
+	/**
+	 * @arg slot for the offset register (0..3)
+	 * @arg channel channel to which the offset is applied
+	 * @arg offset offset value to be applied to the channel
+	 * @return true if the offset was successfully enabled, false if the slot is invalid
+	 * @note The offset can only be applied when the adc is stopped!
+	 */
+	static inline bool
+	enableChannelOffset(const OffsetSlot slot, const Channel channel, const uint16_t offset);
+
+	/**
+	 * @arg slot for the offset register (0..3)
+	 * @arg offset value applied to the channel
+	 * @return true if the offset was successfully enabled, false if the slot is invalid
+	 * @note The channel is determined by the GPIO pin type.
+	 * @note The offset can only be applied when the adc is stopped!
+	 */
+	template<class Gpio>
+	static inline bool enableChannelOffset(const OffsetSlot slot, const uint16_t offset)
+	{
+		return enableChannelOffset(slot, getPinChannel<Gpio>(), offset);
+	}
+
+%% else
+	/**
+	 * @arg slot for the offset register (0..3)
+	 * @arg channel channel to which the offset is applied
+	 * @arg offset offset value to be applied to the channel
+	 * @arg saturate if true, the adc result value is saturated to the range of the ADC
+	 * @return true if the offset was successfully enabled, false if the slot is invalid
+	 * @note The offset can only be applied when the adc is stopped!
+	 */
+	static inline bool
+	enableChannelOffset(const OffsetSlot slot, const Channel channel, const int16_t offset, const bool saturate = false);
+
+	/**
+	 * @arg slot for the offset register (0..3)
+	 * @arg offset value applied to the channel
+	 * @arg saturate if true, the adc result value is saturated to the range of the ADC
+	 * @return true if the offset was successfully enabled, false if the slot is invalid
+	 * @note The channel is determined by the GPIO pin type.
+	 * @note The offset can only be applied when the adc is stopped!
+	 */
+	template<class Gpio>
+	static inline bool enableChannelOffset(const OffsetSlot slot, const int16_t offset, const bool saturate = false)
+	{
+		return enableChannelOffset(slot, getPinChannel<Gpio>(), offset, saturate);
+	}
+%% endif
+
+	/**
+	 * @arg slot for the offset register (0..3)
+	 * @return true if the offset was successfully disabled, false if the slot is invalid
+	 * @note The offset can only be disabled when the adc is stopped!
+	 */
+	static inline bool disableChannelOffset(OffsetSlot slot);
+
+	/**
+	 * @arg slot for the offset register (0..3)
+	 * @return true if the offset was successfully disabled, false if the slot is invalid
+	 * @note The channel is determined by the GPIO pin type.
+	 * @note The offset can only be disabled when the adc is stopped!
+	 */
+	template<class Gpio>
+	static inline bool disableChannelOffset(OffsetSlot slot)
+	{
+		return disableChannelOffset(slot);
+	}
+
 	static inline void
 	enableInterruptVector(const uint32_t priority, const bool enable = true);
 

src/modm/platform/adc/stm32f3/adc_impl.hpp.in

@@ -302,6 +302,25 @@ modm::platform::Adc{{ id }}::isConversionSequenceFinished()
 	return static_cast<bool>(getInterruptFlags() & InterruptFlag::EndOfRegularSequenceOfConversions);
 }
 
+void
+modm::platform::Adc{{ id }}::enableRegularConversionExternalTrigger(
+	ExternalTriggerPolarity externalTriggerPolarity,
+	ExternalTriggerEvent externalTriggerEvent)
+{
+	const auto polarity = (static_cast<uint32_t>(externalTriggerPolarity) << ADC_CFGR_EXTEN_Pos);
+	const auto externalTrigger = (static_cast<uint32_t>(externalTriggerEvent) << ADC_CFGR_EXTSEL_Pos);
+	const auto mask = ADC_CFGR_EXTEN_Msk | ADC_CFGR_EXTSEL_Msk;
+	ADC{{ id }}->CFGR = (ADC{{ id }}->CFGR & ~mask) | polarity | externalTrigger;
+}
+
+void
+modm::platform::Adc{{ id }}::disableRegularConversionExternalTrigger()
+{
+	// Disable regular conversions external trigger by clearing the bits
+	// for polarity and external trigger source.
+	ADC{{ id }}->CFGR &= ~(ADC_CFGR_EXTEN_Msk | ADC_CFGR_EXTSEL_Msk);
+}
+
 void
 modm::platform::Adc{{ id }}::startInjectedConversionSequence()
 {
@@ -351,6 +370,25 @@ modm::platform::Adc{{ id }}::setInjectedConversionSequenceLength(uint8_t length)
 	return true;
 }
 
+void
+modm::platform::Adc{{ id }}::enableInjectedConversionExternalTrigger(
+	ExternalTriggerPolarity externalTriggerPolarity,
+	ExternalTriggerEvent externalTriggerEvent)
+{
+	const auto polarity = (static_cast<uint32_t>(externalTriggerPolarity) << ADC_JSQR_JEXTEN_Pos);
+	const auto externalTrigger = (static_cast<uint32_t>(externalTriggerEvent) << ADC_JSQR_JEXTSEL_Pos);
+	const auto mask = ADC_JSQR_JEXTEN_Msk | ADC_JSQR_JEXTSEL_Msk;
+	ADC{{ id }}->JSQR = (ADC{{ id }}->JSQR & ~mask) | polarity | externalTrigger;
+}
+
+void
+modm::platform::Adc{{ id }}::disableInjectedConversionExternalTrigger()
+{
+	// Disable injected conversions external trigger by clearing the bits
+	// for polarity and external trigger source.
+	ADC{{id}}->JSQR &= ~(ADC_JSQR_JEXTEN_Msk | ADC_JSQR_JEXTSEL_Msk);
+}
+
 bool
 modm::platform::Adc{{ id }}::isInjectedConversionFinished()
 {
@@ -410,3 +448,88 @@ modm::platform::Adc{{ id }}::acknowledgeInterruptFlags(const InterruptFlag_t fla
 	// Writing a zero is ignored.
 	ADC{{ id }}->ISR = flags.value;
 }
+
+%% if target["family"] in ["f3", "l4", "l5"] or (target["family"] in ["h7"] and resolution == 16):
+bool
+modm::platform::Adc{{ id }}::enableChannelOffset(const OffsetSlot slot, const Channel channel, const uint16_t offset)
+{
+	const uint32_t offsetMask = (offset << ADC_OFR1_OFFSET1_Pos) & ADC_OFR1_OFFSET1_Msk;
+	const uint32_t signMask = 0u;
+	const uint32_t saturateMask = 0u;
+%% else
+bool
+modm::platform::Adc{{ id }}::enableChannelOffset( const OffsetSlot slot, const Channel channel, const int16_t offset, const bool saturate)
+{
+	const uint32_t offsetMask = (std::abs(offset) << ADC_OFR1_OFFSET1_Pos) & ADC_OFR1_OFFSET1_Msk;
+%% if target["family"] in["h7"]
+%# H7 names the bits differently, but the logic is the same
+	const uint32_t signMask = (offset > 0) ? ADC3_OFR1_OFFSETPOS : 0u;
+	const uint32_t saturateMask = saturate ? ADC3_OFR1_SATEN : 0u;
+%% else
+	const uint32_t signMask = (offset > 0) ? ADC_OFR1_OFFSETPOS : 0u;
+	const uint32_t saturateMask = saturate ? ADC_OFR1_SATEN : 0u;
+%% endif
+%% endif
+%% if target["family"] in ["h7"]
+%% if resolution == 16
+%# no specific enable bit for H7 16-bit ADC, so always 0
+	const uint32_t enableMask = 0u;
+%% else
+	const uint32_t enableMask = ADC3_OFR1_OFFSET1_EN;
+%% endif
+%% else
+	const uint32_t enableMask = ADC_OFR1_OFFSET1_EN;
+%% endif
+	const uint32_t channelMask = (static_cast<uint32_t>(channel) << ADC_OFR1_OFFSET1_CH_Pos) & ADC_OFR1_OFFSET1_CH_Msk;
+	const uint32_t offsetValue = channelMask | offsetMask | enableMask | saturateMask | signMask;
+
+	if (ADC{{id}}->CR & (ADC_CR_ADSTART | ADC_CR_JADSTART))
+	{
+		// ADC is currently converting, cannot set offset
+		return false;
+	}
+
+	switch (slot)
+	{
+		case OffsetSlot::Slot0: ADC{{id}}->OFR1 = offsetValue;	break;
+		case OffsetSlot::Slot1: ADC{{id}}->OFR2 = offsetValue;	break;
+		case OffsetSlot::Slot2: ADC{{id}}->OFR3 = offsetValue;	break;
+		case OffsetSlot::Slot3: ADC{{id}}->OFR4 = offsetValue;	break;
+		default:
+			return false;	// invalid slot
+	}
+
+	return true;
+}
+
+bool
+modm::platform::Adc{{ id }}::disableChannelOffset(const OffsetSlot slot)
+{
+	if (ADC{{id}}->CR & (ADC_CR_ADSTART | ADC_CR_JADSTART))
+	{
+		// ADC is currently converting, cannot disable offset
+		return false;
+	}
+
+%% if target["family"] in ["h7"]
+%% if resolution == 16
+	%# no specific enable bit for H7 16-bit ADC
+	const uint32_t enableMask = ADC_OFR1_OFFSET1_Msk;
+%% else
+	const uint32_t enableMask = ADC3_OFR1_OFFSET1_EN;
+%% endif
+%% else
+	const uint32_t enableMask = ADC_OFR1_OFFSET1_EN;
+%%endif
+
+	switch (slot)
+	{
+		case OffsetSlot::Slot0: ADC{{id}}->OFR1 &= ~enableMask; break;
+		case OffsetSlot::Slot1: ADC{{id}}->OFR2 &= ~enableMask; break;
+		case OffsetSlot::Slot2: ADC{{id}}->OFR3 &= ~enableMask; break;
+		case OffsetSlot::Slot3: ADC{{id}}->OFR4 &= ~enableMask; break;
+		default:
+			return false;  // invalid slot
+	}
+	return true;
+}