Opensuse/MATE, in Caja SATA HDD doesn't show up when On-demand mount, hot plug

[VadeInPace]

Hi,
Opensuse Leap 15.6, MATE 1.26.1
When I switch on (hot plug) a SATA HDD, nothing happens in the GUI. Nothing show up in Caja, no new Caja window.
With USB devices it's working fine.
fstab
`# On-demand SATA HDD mount
UUID=e36711e7-67c4-460c-b002-529e09e7c792 /mnt/Store1 ext4 noauto,nofail,x-systemd.automount,x-systemd.mount-timeout=10,x-systemd.idle-timeout=10min 0 0

~> udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[9572.585133] add /devices/virtual/devlink/:ata3--scsi:2:0:0:0 (devlink)
KERNEL[9572.585570] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0 (scsi)
KERNEL[9572.585686] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0 (scsi)
KERNEL[9572.585722] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/scsi_device/2:0:0:0 (scsi_device)
KERNEL[9572.585818] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/scsi_generic/sg0 (scsi_generic)
KERNEL[9572.585882] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/scsi_disk/2:0:0:0 (scsi_disk)
KERNEL[9572.585922] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/bsg/2:0:0:0 (bsg)
KERNEL[9572.586886] add /devices/virtual/bdi/8:0 (bdi)
UDEV [9572.591506] add /devices/virtual/devlink/:ata3--scsi:2:0:0:0 (devlink)
UDEV [9572.592425] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0 (scsi)
UDEV [9572.593303] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0 (scsi)
UDEV [9572.593319] add /devices/virtual/bdi/8:0 (bdi)
UDEV [9572.594115] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/scsi_device/2:0:0:0 (scsi_device)
UDEV [9572.594297] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/scsi_disk/2:0:0:0 (scsi_disk)
UDEV [9572.594429] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/scsi_generic/sg0 (scsi_generic)
UDEV [9572.594715] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/bsg/2:0:0:0 (bsg)
KERNEL[9572.623096] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/block/sda (block)
KERNEL[9572.623140] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/block/sda/sda1 (block)
KERNEL[9572.623167] bind /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0 (scsi)
UDEV [9572.787804] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/block/sda (block)
UDEV [9572.916645] add /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0/block/sda/sda1 (block)
UDEV [9572.917215] bind /devices/pci0000:00/0000:00:02.1/0000:01:00.1/ata3/host2/target2:0:0/2:0:0:0 (scsi)
`
Is it a bug? How to troubleshoot? Any help?
Thanks

[lukefromdc]

I am not seeing anything in that code referring to mounting the device. Is is properly formatted? If not you might potentially have hardware or kernel issues

[VadeInPace]

Thank you for your reply.
The hard drive is correctly formatted and contains data. After turning it on, as I wrote, nothing happens in Caja. If I enter the path in the ‘Go to:’ field and press Enter, the data on the hard drive is displayed below. I can then read/write to the hard drive as usual. However, there is no way to unmount it in Caja.
It should work the same way as with a USB stick: when I turn it on/plug it in, the hard drive appears in the left column with a small arrow to unmount it. Once unmounted, it should disappear.
Would you like more tests/code? Let me know.

[lukefromdc]

I have no way to evaluate this any further. I don't have this problem here and do not have a landline to download distros over for testing

[VadeInPace]

After lot of reading:
This issue is due to my bad command in fstab
noauto,x-systemd.automount
tells systemd:
• ❌ Do not mount at boot
• ❌ Do not mount when the device appears
• ✅ Mount only when something accesses /mnt/Store1
Caja shows nothing
With these commands, it is the expected behavior.
Moreover to get a good Caja integration prefer /run/media/{$USER}/myHDD as mount point.
The command should be:
UUID=e36711e7-67c4-460c-b002-649e9e792 /run/media/user1/Store1 ext4 nofail,x-systemd.idle-timeout=10min 0 0

Hope this will help.
Thanks for your time.