diff --git a/Buildings/Experimental/DHC/Loads/HotWater/Examples/BaseClasses/PartialHeaterAndFixture.mo b/Buildings/Experimental/DHC/Loads/HotWater/Examples/BaseClasses/PartialHeaterAndFixture.mo
deleted file mode 100644
index 09c1fcbd522..00000000000
--- a/Buildings/Experimental/DHC/Loads/HotWater/Examples/BaseClasses/PartialHeaterAndFixture.mo
+++ /dev/null
@@ -1,86 +0,0 @@
-within Buildings.Experimental.DHC.Loads.HotWater.Examples.BaseClasses;
-partial model PartialHeaterAndFixture
-  "Partial base class for hot water source, thermostatic mixing, and fixture load examples."
-  replaceable package Medium = Buildings.Media.Water "Water media model";
-  parameter Modelica.Units.SI.Temperature THotSouSet=273.15 + 50
-    "Temperature setpoint of hot water supply source from heater";
-  parameter Modelica.Units.SI.Temperature TDis = 273.15+30 "Temperature of water supply from district";
-  parameter Modelica.Units.SI.Temperature TMixSet=273.15 + 43
-    "Temperature setpoint of hot water supply to fixture";
-  parameter Modelica.Units.SI.Temperature TCol = 273.15+10 "Temperature of domestic cold water supply";
-  parameter Modelica.Units.SI.MassFlowRate mHotSou_flow_nominal = 0.1 "Nominal mass flow rate of hot water source supply";
-  parameter Modelica.Units.SI.MassFlowRate mDis_flow_nominal = 1 "Nominal mass flow rate of district water";
-  parameter Modelica.Units.SI.MassFlowRate mMix_flow_nominal=1
-    "Nominal mass flow rate of hot water supplied to fixture";
-  parameter Modelica.Units.SI.PressureDifference dpValve_nominal(min=0, displayUnit="Pa") = 1000 "Pressure difference";
-
-  Buildings.Fluid.Sources.Boundary_pT souCol(
-    redeclare package Medium = Medium,
-    T(displayUnit="degC") = TCol,
-    nPorts=1) "Source of domestic cold water"
-    annotation (Placement(transformation(extent={{-10,-10},{10,10}},
-        rotation=90,
-        origin={10,-50})));
-  ThermostaticMixingValve theMixVal(redeclare package Medium = Medium,
-      mMix_flow_nominal=mMix_flow_nominal) "Ideal thermostatic mixing valve"
-    annotation (Placement(transformation(extent={{0,-12},{20,8}})));
-  Fluid.Sources.MassFlowSource_T souDis(
-    redeclare package Medium = Medium,
-    m_flow=mDis_flow_nominal,
-    T(displayUnit="degC") = TDis) "Source of district network water" annotation (
-     Placement(transformation(
-        extent={{-10,-10},{10,10}},
-        rotation=90,
-        origin={-30,-50})));
-  Modelica.Blocks.Sources.Constant conTHotSouSet(k=THotSouSet)
-    "Temperature setpoint for domestic hot water source supplied from heater"
-    annotation (Placement(transformation(extent={{-90,-10},{-70,10}})));
-  Modelica.Blocks.Sources.CombiTimeTable sch(
-    tableOnFile=true,
-    tableName="tab1",
-    fileName=Modelica.Utilities.Files.loadResource("modelica://Buildings/Resources/Data/Experimental/DHC/Loads/Heating/DHW/DHW_SingleApartment.mos"),
-    smoothness=Modelica.Blocks.Types.Smoothness.LinearSegments,
-    extrapolation=Modelica.Blocks.Types.Extrapolation.Periodic)
-    "Domestic hot water fixture draw fraction schedule"
-    annotation (Placement(transformation(extent={{-90,50},{-70,70}})));
-
-  Fluid.Sources.Boundary_pT sinDis(
-    redeclare package Medium = Medium,
-    T(displayUnit="degC")) "Sink of district network water" annotation (
-      Placement(transformation(
-        extent={{-10,-10},{10,10}},
-        rotation=90,
-        origin={-60,-50})));
-  Modelica.Blocks.Interfaces.RealOutput PEle(final unit="W")
-    "Electric power required for generation equipment"
-    annotation (Placement(transformation(extent={{100,70},{120,90}})));
-  Modelica.Blocks.Sources.Constant conTSetHot(k(final unit="K")=TMixSet)
-    "Temperature setpoint for hot water supply to fixture"
-    annotation (Placement(transformation(extent={{-90,20},{-70,40}})));
-equation
-  connect(conTSetHot.y, theMixVal.TMixSet) annotation (Line(points={{-69,30},{-10,
-          30},{-10,0},{-1,0}}, color={0,0,127}));
-  connect(theMixVal.port_col, souCol.ports[1]) annotation (Line(points={{0,-10},
-          {-10,-10},{-10,-30},{10,-30},{10,-40}}, color={0,127,255}));
-  connect(theMixVal.yMixSet, sch.y[1]) annotation (Line(points={{-1,6},{-4,6},{
-          -4,60},{-69,60}}, color={0,0,127}));
-  annotation (preferredView="info",Documentation(info="<html>
-<p>
-Partial base class for hot water source, thermostatic mixing, and fixture load examples.
-</p>
-</html>", revisions="<html>
-<ul>
-<li>
-September 11, 2023 by David Blum:<br/>
-Made as base class.
-</li>
-<li>
-October 20, 2022 by Dre Helmns:<br/>
-Initial implementation.
-</li>
-</ul>
-</html>"),experiment(
-      StopTime=864000,
-      Interval=1,
-      Tolerance=1e-06));
-end PartialHeaterAndFixture;
diff --git a/Buildings/Experimental/DHC/Loads/HotWater/Examples/BaseClasses/package.order b/Buildings/Experimental/DHC/Loads/HotWater/Examples/BaseClasses/package.order
deleted file mode 100644
index 8093fd47ab7..00000000000
--- a/Buildings/Experimental/DHC/Loads/HotWater/Examples/BaseClasses/package.order
+++ /dev/null
@@ -1 +0,0 @@
-PartialHeaterAndFixture