build-yocto-genivi is a subproject of easy-build and has the objective of providing a simplified environment where to rebuild from sources
as well as running it on virtual targets such as QEMU, VirtualBox or VMware.
build-yocto-genivi relies on Docker and creates a clean, stand-alone development environment complete with all the tools needed to perform a full build of the target image.
Several options are possible here.
The most recent builds of the build-yocto-genivi project are published on Docker Hub:
$ docker pull gmacario/build-yocto-genivi
Alternatively you may do a local rebuild of your Docker image following to the instructions
inside the Dockerfile. You may do so through the following command
$ ./build.sh
NOTE: If the script appears to hang, please either delete or move the contents
of the shared/ subdirectory before launching the script.
This is basically what the build.sh script does, but you may customize the Docker image
or add other configuration options (please consult man docker for details)
$ docker build -t my-build-yocto-genivi .
Prerequisite: the Docker image is already available locally.
As before, several options are possible.
This command will execute faster in case the container has already run previously.
$ ./run.sh
This command will create and start a new container
$ docker run -t -i -v <shareddir>:/home/build/shared gmacario/build-yocto-genivi
The -v <shareddir>:/home/build/shared options instructs Docker to have the /home/build/shared
directory of the container mapped to a directory of the host filesystem.
This may be used to prevent the Yocto build directory to fill in the partition where containers
are created, as well as for preserving the build directory after the container is destroyed.
Adapted from meta-ivi README.md
Prerequisite: the container is already running.
# Make sure that /dev/shm is writable
chmod a+w /dev/shm
# Make sure that ~build/shared directory is owned by user "build"
chown build.build ~build/shared
# Switch to user 'build'
su - build
After logging in as user "build" execute the following commands:
$ export GENIVI=~/genivi-baseline
$ source ${GENIVI}/poky/oe-init-build-env ~/shared/my-genivi-build
$ export TOPDIR=${PWD}
Review script configure_build.sh and make any modifications if needed, then invoke the script
$ sh ~/configure_build.sh
For help about syntax of conf/bblayers.conf and conf/local.conf please refer to the
Yocto Project Documentation.
$ cd ${TOPDIR}
$ bitbake -k <genivi_release>-image
The actual command depends on which GENIVI release you are targeting at.
NOTE: This command may take a few hours to complete.
Command:
$ cd ${TOPDIR}
$ bitbake -k jupiter-image
Result (for meta-ivi 8.0):
build@50e2c65e266d:~/shared/my-genivi-build$ bitbake -k jupiter-image
Loading cache: 100% |#############################################################################| ETA: 00:00:00
Loaded 1887 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.24.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "i586-poky-linux"
MACHINE = "qemux86"
DISTRO = "poky-ivi-systemd"
DISTRO_VERSION = "8.0.0"
TUNE_FEATURES = "m32 i586"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "(detachedfrom6dd21a9):6dd21a9f152a93e2df1178d7a5bd903d7edcf4be"
meta-ivi
meta-ivi-bsp = "8.0:3a619f09239276dafca21f521fdbffae226b6e0e"
meta-oe = "(detachedfrom853dcfa):853dcfa0d618dc26bd27b3a1b49494b98d6eee97"
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL http://zlib.net/pigz/pigz-2.3.1.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/b/base-passwd/base-passwd_3.5.29.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://downloads.sourceforge.net/project/libpng/libpng16/1.6.13/libpng-1.6.13.tar.xz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://www.apache.org/dist/apr/apr-util-1.5.3.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://ftp.gnome.org/pub/GNOME/sources/gnome-common/3.12/gnome-common-3.12.0.tar.xz;name=archive, attempting MIRRORS if available
WARNING: Checksum failure encountered with download of http://avahi.org/download/avahi-0.6.31.tar.gz - will attempt other sources if available
WARNING: Renaming /home/build/shared/my-genivi-build/downloads/avahi-0.6.31.tar.gz to /home/build/shared/my-genivi-build/downloads/avahi-0.6.31.tar.gz_bad-checksum_5fea92ab9e5697fb8f146319b6120b3a
WARNING: Failed to fetch URL http://www.apache.org/dist/subversion/subversion-1.8.9.tar.bz2, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/n/netbase/netbase_5.2.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/d/dpkg/dpkg_1.17.4.tar.xz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://ftp.de.debian.org/debian/pool/main/m/mklibs/mklibs_0.1.39.tar.xz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://createrepo.baseurl.org/download/createrepo-0.4.11.tar.gz, attempting MIRRORS if available
NOTE: validating kernel config, see log.do_kernel_configcheck for details
WARNING: QA Issue: coreutils: configure was passed unrecognised options: --disable-acl [unknown-configure-option]
WARNING: QA Issue: mesa: configure was passed unrecognised options: --with-llvm-shared-libs [unknown-configure-option]
WARNING: QA Issue: coreutils rdepends on libacl, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: ELF binary '/home/build/shared/my-genivi-build/tmp/work/i586-poky-linux/wayland-ivi-extension/1.3.0-r0/packages-split/wayland-ivi-extension/usr/lib/weston/ivi-controller.so' has relocations in .text [textrel]
WARNING: QA Issue: pulseaudio-module-console-kit rdepends on consolekit, but it isn't a build dependency? [build-deps]
NOTE: Tasks Summary: Attempted 3179 tasks of which 15 didn't need to be rerun and all succeeded.
Summary: There were 17 WARNING messages shown.
build@50e2c65e266d:~/shared/my-genivi-build$
As a result of the build the following files will be created:
build@50e2c65e266d:~/shared/my-genivi-build$ ls -la tmp/deploy/images/qemux86/
total 317740
drwxrwxr-x 2 build build 4096 Mar 19 14:06 .
drwxrwxr-x 3 build build 4096 Mar 19 13:33 ..
-rw-r--r-- 2 build build 294 Mar 19 14:01 README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
lrwxrwxrwx 1 build build 73 Mar 19 13:33 bzImage -> bzImage--3.14.24+git0+a227f20eff_38cd560d50-r0-qemux86-20150319110225.bin
-rw-r--r-- 2 build build 6643952 Mar 19 13:33 bzImage--3.14.24+git0+a227f20eff_38cd560d50-r0-qemux86-20150319110225.bin
lrwxrwxrwx 1 build build 73 Mar 19 13:33 bzImage-qemux86.bin -> bzImage--3.14.24+git0+a227f20eff_38cd560d50-r0-qemux86-20150319110225.bin
-rw-r--r-- 1 build build 281374720 Mar 19 14:05 jupiter-image-qemux86-20150319110225.rootfs.ext3
-rw-r--r-- 1 build build 33594 Mar 19 14:05 jupiter-image-qemux86-20150319110225.rootfs.manifest
-rw-r--r-- 1 build build 55339655 Mar 19 14:05 jupiter-image-qemux86-20150319110225.rootfs.tar.bz2
lrwxrwxrwx 1 build build 48 Mar 19 14:06 jupiter-image-qemux86.ext3 -> jupiter-image-qemux86-20150319110225.rootfs.ext3
lrwxrwxrwx 1 build build 52 Mar 19 14:06 jupiter-image-qemux86.manifest -> jupiter-image-qemux86-20150319110225.rootfs.manifest
lrwxrwxrwx 1 build build 51 Mar 19 14:06 jupiter-image-qemux86.tar.bz2 -> jupiter-image-qemux86-20150319110225.rootfs.tar.bz2
-rw-rw-r-- 2 build build 76208922 Mar 19 13:33 modules--3.14.24+git0+a227f20eff_38cd560d50-r0-qemux86-20150319110225.tgz
lrwxrwxrwx 1 build build 73 Mar 19 13:33 modules-qemux86.tgz -> modules--3.14.24+git0+a227f20eff_38cd560d50-r0-qemux86-20150319110225.tgz
build@50e2c65e266d:~/shared/my-genivi-build$
Command:
$ cd ${TOPDIR}
$ bitbake -k intrepid-image
Sample output:
build@f49b57277afb:~/shared/my-genivi-build$ bitbake -k intrepid-image
Parsing recipes: 100% |###########################################################################| Time: 00:00:43
Parsing of 1436 .bb files complete (0 cached, 1436 parsed). 1883 targets, 216 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.24.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "i586-poky-linux"
MACHINE = "qemux86"
DISTRO = "poky-ivi-systemd"
DISTRO_VERSION = "7.0.3"
TUNE_FEATURES = "m32 i586"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "(detachedfromdf87cb2):df87cb27efeaea1455f20692f9f1397c6fcab254"
meta-ivi
meta-ivi-bsp = "(detachedfrom7.0.3):7cae90ffa290cb4ab0578174abfebce5579cac48"
meta-oe = "(detachedfrom9efaed9):9efaed99125b1c4324663d9a1b2d3319c74e7278"
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL http://zlib.net/pigz/pigz-2.3.1.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/b/base-passwd/base-passwd_3.5.29.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://downloads.sourceforge.net/project/libpng/libpng16/1.6.13/libpng-1.6.13.tar.xz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://www.apache.org/dist/apr/apr-util-1.5.3.tar.gz, attempting MIRRORS if available
WARNING: Checksum failure encountered with download of http://avahi.org/download/avahi-0.6.31.tar.gz - will attempt other sources if available
WARNING: Renaming /home/build/shared/my-genivi-build/downloads/avahi-0.6.31.tar.gz to /home/build/shared/my-genivi-build/downloads/avahi-0.6.31.tar.gz_bad-checksum_5fea92ab9e5697fb8f146319b6120b3a
WARNING: Failed to fetch URL http://www.apache.org/dist/subversion/subversion-1.8.9.tar.bz2, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/n/netbase/netbase_5.2.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/d/dpkg/dpkg_1.17.4.tar.xz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://ftp.de.debian.org/debian/pool/main/m/mklibs/mklibs_0.1.39.tar.xz, attempting MIRRORS if available
NOTE: validating kernel config, see log.do_kernel_configcheck for details
WARNING: QA Issue: coreutils: configure was passed unrecognised options: --disable-acl [unknown-configure-option]
WARNING: QA Issue: mesa: configure was passed unrecognised options: --with-llvm-shared-libs [unknown-configure-option]
WARNING: QA Issue: ELF binary '/home/build/shared/my-genivi-build/tmp/work/i586-poky-linux/wayland-ivi-extension/1.2.0-r0/packages-split/wayland-ivi-extension/usr/lib/weston/ivi-controller.so' has relocations in .text [textrel]
WARNING: QA Issue: pulseaudio-module-console-kit rdepends on consolekit, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: coreutils rdepends on libacl, but it isn't a build dependency? [build-deps]
NOTE: Tasks Summary: Attempted 3194 tasks of which 26 didn't need to be rerun and all succeeded.
Summary: There were 15 WARNING messages shown.
build@f49b57277afb:~/shared/my-genivi-build$
As a result of the build the following files will be created:
build@f49b57277afb:~/shared/my-genivi-build$ ls -la tmp/deploy/images/qemux86/
total 317448
drwxrwxr-x 2 build build 4096 Mar 13 11:49 .
drwxrwxr-x 3 build build 4096 Mar 13 11:21 ..
-rw-r--r-- 2 build build 294 Mar 13 11:44 README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
lrwxrwxrwx 1 build build 73 Mar 13 11:21 bzImage -> bzImage--3.14.19+git0+fb6271a942_e19a1b40de-r0-qemux86-20150313083745.bin
-rw-r--r-- 2 build build 6636528 Mar 13 11:20 bzImage--3.14.19+git0+fb6271a942_e19a1b40de-r0-qemux86-20150313083745.bin
lrwxrwxrwx 1 build build 73 Mar 13 11:21 bzImage-qemux86.bin -> bzImage--3.14.19+git0+fb6271a942_e19a1b40de-r0-qemux86-20150313083745.bin
-rw-r--r-- 1 build build 281150464 Mar 13 11:48 intrepid-image-qemux86-20150313083745.rootfs.ext3
-rw-r--r-- 1 build build 33564 Mar 13 11:48 intrepid-image-qemux86-20150313083745.rootfs.manifest
-rw-r--r-- 1 build build 55350267 Mar 13 11:48 intrepid-image-qemux86-20150313083745.rootfs.tar.bz2
lrwxrwxrwx 1 build build 49 Mar 13 11:49 intrepid-image-qemux86.ext3 -> intrepid-image-qemux86-20150313083745.rootfs.ext3
lrwxrwxrwx 1 build build 53 Mar 13 11:49 intrepid-image-qemux86.manifest -> intrepid-image-qemux86-20150313083745.rootfs.manifest
lrwxrwxrwx 1 build build 52 Mar 13 11:49 intrepid-image-qemux86.tar.bz2 -> intrepid-image-qemux86-20150313083745.rootfs.tar.bz2
-rw-rw-r-- 2 build build 76114738 Mar 13 11:21 modules--3.14.19+git0+fb6271a942_e19a1b40de-r0-qemux86-20150313083745.tgz
lrwxrwxrwx 1 build build 73 Mar 13 11:21 modules-qemux86.tgz -> modules--3.14.19+git0+fb6271a942_e19a1b40de-r0-qemux86-20150313083745.tgz
build@f49b57277afb:~/shared/my-genivi-build$
Prerequisite: Create and run the container as explained before, then logged as user "build"
$ cd ~/shared
Retrieve the configure_build_gdp.sh script if you haven't one already:
$ if [ ! -x configure_build_gdp.sh ]; then curl -O \
https://raw.githubusercontent.com/gmacario/easy-build/master/build-yocto-genivi/configure_build_gdp.sh; \
chmod 755 configure_build_gdp.sh; fi
Run the configure_build_gdp.sh once to clone/pull the source repositories:
$ ~/shared/configure_build_gdp.sh
Then create the build directory and run the script again to customize the build configuration:
$ source ~/shared/sources/poky/oe-init-build-env ~/shared/my-gdp-build04
$ ~/shared/configure_build_gdp.sh
You may now start the build of the GDP with the following command
$ bitbake -k genivi-demo-platform
Result:
Missing or unbuildable dependency chain was: ['qt4-examples-dbg', 'virtual/libx11']
NOTE: Runtime target 'qt4-linguist-dbg' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['qt4-linguist-dbg', 'virtual/libx11']
NOTE: Runtime target 'qt4-makeqpf-dbg' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['qt4-makeqpf-dbg', 'virtual/libx11']
NOTE: Runtime target 'qt4-mkspecs-dbg' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['qt4-mkspecs-dbg', 'virtual/libx11']
NOTE: Runtime target 'qt4-pixeltool-dbg' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['qt4-pixeltool-dbg', 'virtual/libx11']
NOTE: Runtime target 'qt4-qmlviewer-dbg' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['qt4-qmlviewer-dbg', 'virtual/libx11']
NOTE: Runtime target 'qt4-xmlpatterns-dbg' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['qt4-xmlpatterns-dbg', 'virtual/libx11']
NOTE: Runtime target 'qt4-qt3to4-dbg' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['qt4-qt3to4-dbg', 'virtual/libx11']
NOTE: Runtime target 'qt4-qml-plugins-dbg' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['qt4-qml-plugins-dbg', 'virtual/libx11']
NOTE: Runtime target 'libqtpvrqwswsegl4-dbg' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['libqtpvrqwswsegl4-dbg', 'virtual/libx11']
ERROR: Nothing PROVIDES 'libxft' (but /home/build/shared/sources/poky/meta/recipes-qt/qt4/qt4-x11-free_4.8.6.bb DEPENDS on or otherwise requires it)
ERROR: libxft was skipped: missing required distro feature 'x11' (not in DISTRO_FEATURES)
ERROR: Nothing PROVIDES 'libxext' (but /home/build/shared/sources/poky/meta/recipes-qt/qt4/qt4-x11-free_4.8.6.bb DEPENDS on or otherwise requires it)
ERROR: libxext was skipped: missing required distro feature 'x11' (not in DISTRO_FEATURES)
ERROR: libxext was skipped: missing required distro feature 'x11' (not in DISTRO_FEATURES)
ERROR: Nothing PROVIDES 'libxrender' (but /home/build/shared/sources/poky/meta/recipes-qt/qt4/qt4-x11-free_4.8.6.bb DEPENDS on or otherwise requires it)
ERROR: libxrender was skipped: missing required distro feature 'x11' (not in DISTRO_FEATURES)
ERROR: Nothing PROVIDES 'libxrandr' (but /home/build/shared/sources/poky/meta/recipes-qt/qt4/qt4-x11-free_4.8.6.bb DEPENDS on or otherwise requires it)
ERROR: libxrandr was skipped: missing required distro feature 'x11' (not in DISTRO_FEATURES)
ERROR: Nothing PROVIDES 'libxcursor' (but /home/build/shared/sources/poky/meta/recipes-qt/qt4/qt4-x11-free_4.8.6.bb DEPENDS on or otherwise requires it)
ERROR: libxcursor was skipped: missing required distro feature 'x11' (not in DISTRO_FEATURES)
Build Configuration:
BB_VERSION = "1.24.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "x86_64-poky-linux"
MACHINE = "qemux86-64"
DISTRO = "poky-ivi-systemd"
DISTRO_VERSION = "7.0.3"
TUNE_FEATURES = "m64 core2"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "dizzy:29812e61736a95f1de64b3e9ebbb9c646ebd28dd"
meta-ivi
meta-ivi-bsp = "7.0:0d780d0cfd38694ae5e6f0198adcb72684b01acc"
meta-oe = "dizzy:5b6f39ce325d490fc382d5d59c5b8b9d5fa38b38"
meta-genivi-demo = "master:b1980ff6fefed9957513ce0a57f6926c76421324"
meta-qt5 = "dizzy:adeca0db212d61a933d7952ad44ea1064cfca747"
meta-ruby = "dizzy:5b6f39ce325d490fc382d5d59c5b8b9d5fa38b38"
meta-renesas = "genivi-7.0-bsp-1.8.0:6e829fe6e422793bbb05ec563c8544154c0e9bd8"
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: validating kernel config, see log.do_kernel_configcheck for details
WARNING: QA Issue: mesa: configure was passed unrecognised options: --with-llvm-shared-libs [unknown-configure-option]
WARNING: QA Issue: ELF binary '/home/build/shared/my-gdp-build04/tmp/work/core2-64-poky-linux/wayland-ivi-extension/1.3.0-r0/packages-split/wayland-ivi-extension/usr/lib/weston/ivi-controller.so' has relocations in .text [textrel]
WARNING: QA Issue: pulseaudio-module-console-kit rdepends on consolekit, but it isn't a build dependency? [build-deps]
NOTE: Tasks Summary: Attempted 4166 tasks of which 22 didn't need to be rerun and all succeeded.
Summary: There were 3 WARNING messages shown.
Summary: There were 6 ERROR messages shown, returning a non-zero exit code.
build@4f3caf384331:~/shared/my-gdp-build04$
The following files will be created under tmp/deploy/images/<MACHINE>:
build@4f3caf384331:~/shared/my-gdp-build04$ ls -la tmp/deploy/images/qemux86-64/
total 893664
drwxrwxr-x 2 build build 4096 Apr 30 16:26 .
drwxrwxr-x 3 build build 4096 Apr 30 12:22 ..
-rw-r--r-- 2 build build 294 Apr 30 16:18 README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
lrwxrwxrwx 1 build build 76 Apr 30 12:22 bzImage -> bzImage--3.14.29+git0+6eddbf4787_21ba402e0a-r0-qemux86-64-20150430090259.bin
-rw-r--r-- 2 build build 6621136 Apr 30 12:21 bzImage--3.14.29+git0+6eddbf4787_21ba402e0a-r0-qemux86-64-20150430090259.bin
lrwxrwxrwx 1 build build 76 Apr 30 12:22 bzImage-qemux86-64.bin -> bzImage--3.14.29+git0+6eddbf4787_21ba402e0a-r0-qemux86-64-20150430090259.bin
-rw-r--r-- 1 build build 814094336 Apr 30 16:25 genivi-demo-platform-qemux86-64-20150430090259.rootfs.ext3
-rw-r--r-- 1 build build 43146 Apr 30 16:24 genivi-demo-platform-qemux86-64-20150430090259.rootfs.manifest
-rw-r--r-- 1 build build 180343648 Apr 30 16:25 genivi-demo-platform-qemux86-64-20150430090259.rootfs.tar.bz2
lrwxrwxrwx 1 build build 58 Apr 30 16:26 genivi-demo-platform-qemux86-64.ext3 -> genivi-demo-platform-qemux86-64-20150430090259.rootfs.ext3
lrwxrwxrwx 1 build build 62 Apr 30 16:26 genivi-demo-platform-qemux86-64.manifest -> genivi-demo-platform-qemux86-64-20150430090259.rootfs.manifest
lrwxrwxrwx 1 build build 61 Apr 30 16:26 genivi-demo-platform-qemux86-64.tar.bz2 -> genivi-demo-platform-qemux86-64-20150430090259.rootfs.tar.bz2
-rw-rw-r-- 2 build build 70074601 Apr 30 12:22 modules--3.14.29+git0+6eddbf4787_21ba402e0a-r0-qemux86-64-20150430090259.tgz
lrwxrwxrwx 1 build build 76 Apr 30 12:22 modules-qemux86-64.tgz -> modules--3.14.29+git0+6eddbf4787_21ba402e0a-r0-qemux86-64-20150430090259.tgz
build@4f3caf384331:~/shared/my-gdp-build04$
In case the build fails you may try to clean the offending tasks, as in the following example:
$ bitbake -c cleansstate cairo
then invoke bitbake <package> again.
WARNING: This procedure currently works only for MACHINE=qemux86
Review the create_standalone_images.sh script to adjust the configurable parameters, then run
$ ./create_standalone_images.sh
Follow the instructions displayed by the script for loading and running the images under:
- qemu-system-i386 (tested with qemu-kvm 1.0 on Ubuntu 12.04.4 LTS)
- Oracle VM VirtualBox (tested with VirtualBox 4.3.10 on MS Windows 7 and Ubuntu 12.04.4 LTS)
- VMware Player (tested with VMware Player 6.0.1 on MS Windows 7)