diff --git a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/BaseClasses/PipeDataULg.mo b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/BaseClasses/PipeDataULg.mo index acd36c90eb..3803c40682 100644 --- a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/BaseClasses/PipeDataULg.mo +++ b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/BaseClasses/PipeDataULg.mo @@ -25,16 +25,16 @@ carried out at the University of Liège.

Before to perform a test, the water city network is pushed inside the approximately 39 meter long studied pipe during about 10 minutes -to be sure that it is at the same temperature. +to be sure that it is at the same temperature. During this time period, valves V3 and V1 are opened, the boiler is off and the valve V2 is closed.

-Then, the valve V1 is closed and the valve V2 and V3 are opened. -The boiler is started to reach the setpoint hot water temperature. +Then, the valve V1 is closed and the valve V2 and V3 are opened. +The boiler is started to reach the setpoint hot water temperature. When the temperature setpoint is achieved, data starts to be recorded, the valve V1 is opened and the valve V2 is closed at the same time -to supply the studied pipe in hot water. +to supply the studied pipe in hot water. After the outlet pipe temperature is stabilized, the boiler is shut off.

@@ -58,9 +58,9 @@ src=\"modelica://IBPSA/Resources/Images/Experimental/ULgTestBench.png\" border=\ to the initial temperature of the water (cooling before test)

  • Heat transfer coefficient between the pipe and the ambient is assumed -at 5 W/m2K (from internal model) due to insulation. +at 5 W/m2K (from internal model) due to insulation. The pipe is insulated by Tubolit 60/13 (13mm of thickness) whose -nominal thermal coefficient is inferior 0.04. +nominal thermal coefficient is inferior 0.04. Notice the insulation is quite aged therefore the nominal thermal coefficient could be higher
    • diff --git a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/BaseClasses/package.mo b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/BaseClasses/package.mo index 1eb72c351d..43a3987f2f 100644 --- a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/BaseClasses/package.mo +++ b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/BaseClasses/package.mo @@ -2,4 +2,11 @@ within IBPSA.Fluid.FixedResistances.Validation.PlugFlowPipes.Data; package BaseClasses "BaseClasses for data records" extends Modelica.Icons.BasesPackage; +annotation (Documentation(info=" +

    +This package contains base classes that are used to construct the models in + +IBPSA.Fluid.FixedResistances.Validation.PlugFlowPipes.Data. +

    +")); end BaseClasses; diff --git a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/PipeDataULg160104_2.mo b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/PipeDataULg160104_2.mo index 89d2c725dd..85318fe47a 100644 --- a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/PipeDataULg160104_2.mo +++ b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/Data/PipeDataULg160104_2.mo @@ -1004,7 +1004,6 @@ record PipeDataULg160104_2 "Experimental data from ULg's pipe test bench from 4 21.2; 10145.1,0.2494,22.2,22.3,21.3,21.2; 10152.7,0.2494,22.1,22.3,21.2, 21.2; 10161.2,0.2494,22.1,22.3,21.2,21.1; 10169,0.2494,22.1,22.2,21.2, 21.1; 10176.5,0.2494,22.1,22.2,21.2,21.1]); - // TODO adapt this value annotation (Documentation(revisions=" -"), - __Dymola_Commands(file= - "Resources/Scripts/Dymola/Fluid/FixedResistances/Validation/PlugFlowPipes/MSLAIT.mos" - "Simulate and plot")); +")); end MSLAIT; diff --git a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/MSLAIT2Nodes.mo b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/MSLAIT2Nodes.mo index 2a72e4c237..314f980107 100644 --- a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/MSLAIT2Nodes.mo +++ b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/MSLAIT2Nodes.mo @@ -431,9 +431,10 @@ equation annotation ( Diagram(coordinateSystem(preserveAspectRatio=false, extent={{-160,-160},{ 220,200}})), - experiment(StopTime=603900, Tolerance=1e-006, - __Dymola_Algorithm="Dassl"), - __Dymola_experimentSetupOutput(events=false), + experiment(StopTime=603900, Tolerance=1e-006), + __Dymola_Commands(file= + "Resources/Scripts/Dymola/Fluid/FixedResistances/Validation/PlugFlowPipes/MSLAIT2Nodes.mos" + "Simulate and plot"), Documentation(info="

    The example contains @@ -504,8 +505,5 @@ influence of allowFlowReversal and the presence of explicit volumes in the pipe.

  • January 26, 2016 by Carles Ribas:
    First implementation.
    • -"), - __Dymola_Commands(file= - "Resources/Scripts/Dymola/Fluid/FixedResistances/Validation/PlugFlowPipes/MSLAIT2Nodes.mos" - "Simulate and plot")); +")); end MSLAIT2Nodes; diff --git a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/PlugFlowAIT.mo b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/PlugFlowAIT.mo index d6b489aa17..62852c27c5 100644 --- a/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/PlugFlowAIT.mo +++ b/IBPSA/Fluid/FixedResistances/Validation/PlugFlowPipes/PlugFlowAIT.mo @@ -348,8 +348,11 @@ equation experiment( StopTime=603900, Interval=900, - Tolerance=1e-006, - __Dymola_Algorithm="Dassl"), + Tolerance=1e-006), + __Dymola_Commands(file= + "Resources/Scripts/Dymola/Fluid/FixedResistances/Validation/PlugFlowPipes/PlugFlowAIT.mos" + "Simulate and plot"), + Diagram(coordinateSystem(extent={{-120,-160},{160,160}})), Documentation(info="

    The example contains @@ -408,9 +411,5 @@ influence of allowFlowReversal and the presence of explicit volumes in the pipe.

  • January 26, 2016 by Carles Ribas:
    First implementation.
    • -"), - __Dymola_Commands(file= - "Resources/Scripts/Dymola/Fluid/FixedResistances/Validation/PlugFlowPipes/PlugFlowAIT.mos" - "Simulate and plot"), - Diagram(coordinateSystem(extent={{-120,-160},{160,160}}))); +")); end PlugFlowAIT; diff --git a/IBPSA/Fluid/MassExchangers/Validation/package.mo b/IBPSA/Fluid/MassExchangers/Validation/package.mo index 8891da0359..0799ea1348 100644 --- a/IBPSA/Fluid/MassExchangers/Validation/package.mo +++ b/IBPSA/Fluid/MassExchangers/Validation/package.mo @@ -2,4 +2,19 @@ within IBPSA.Fluid.MassExchangers; package Validation "Validation examples" extends Modelica.Icons.ExamplesPackage; +annotation (Documentation(info=" +

    +This package contains validation models for the classes in + +IBPSA.Fluid.MassExchangers. +

    +

    +Note that most validation models contain simple input data +which may not be realistic, but for which the correct +output can be obtained through an analytic solution. +The examples plot various outputs, which have been verified against these +solutions. These model outputs are stored as reference data and +used for continuous validation whenever models in the library change. +

    +")); end Validation; diff --git a/IBPSA/Fluid/MassExchangers/package.mo b/IBPSA/Fluid/MassExchangers/package.mo index aadecfed7b..54f85c3309 100644 --- a/IBPSA/Fluid/MassExchangers/package.mo +++ b/IBPSA/Fluid/MassExchangers/package.mo @@ -3,9 +3,11 @@ package MassExchangers "Package with mass exchanger models" extends Modelica.Icons.VariantsPackage; annotation (preferredView="info", Documentation(info=" +

    This package contains models for mass exchangers. For heat exchanger models without humidity transfer, see the package IBPSA.Fluid.HeatExchangers. +

    ")); end MassExchangers; diff --git a/IBPSA/Fluid/MixingVolumes/Validation/CoupledVolumesWater.mo b/IBPSA/Fluid/MixingVolumes/Validation/CoupledVolumesWater.mo index 2f4974800d..50f7d0e419 100644 --- a/IBPSA/Fluid/MixingVolumes/Validation/CoupledVolumesWater.mo +++ b/IBPSA/Fluid/MixingVolumes/Validation/CoupledVolumesWater.mo @@ -1,7 +1,6 @@ within IBPSA.Fluid.MixingVolumes.Validation; model CoupledVolumesWater "Validation model for two coupled volumes with water" - import IBPSA; extends Modelica.Icons.Example; replaceable package Medium = IBPSA.Media.Water diff --git a/IBPSA/Fluid/Storage/Examples/StratifiedUnloadAtMinimumTemperature.mo b/IBPSA/Fluid/Storage/Examples/StratifiedUnloadAtMinimumTemperature.mo index 80942b9d45..2ed40ef827 100644 --- a/IBPSA/Fluid/Storage/Examples/StratifiedUnloadAtMinimumTemperature.mo +++ b/IBPSA/Fluid/Storage/Examples/StratifiedUnloadAtMinimumTemperature.mo @@ -175,8 +175,7 @@ equation "Simulate and plot"), experiment( StopTime=21600, - Tolerance=1e-06, - __Dymola_Algorithm="Cvode"), + Tolerance=1e-06), Documentation(info="

    Example for tank model that has three outlets, each with a valve.