Not working

[TFUR77]

Hi
Thanks for making this app!
Pairing my Secure SRT 321 went just fine, then I set up one flow where a heater should be turned on when tempetature less than target, and other flow where heater should be turned off when temperature greater than target.
When push the flow test button, it works fine, but when i adjust the thermostate target temp over / below current temp (eighter on the thermostat or in homey) nothing happens.
What may be the reason for this?

Thank you in advance 😊

[hankolsen]

Hi @TFUR77!

Unfortunately I'm not using flow that much myself.
The way I have set mine up is via Groups in Advanced Settings in the SRT321 in Homey.

First I get the unit ID of each device that I want to be controlled:

1. Open the Homey app
2. Click the unit that you want to be controlled
3. Click the cog wheel in the top right corner
4. Click Advanced Settings
5. Scroll down to Unit information for Z-Wave
6. Take note of the Unit Id

Then I add those Unit Id's to the SRT321 under Group 3

1. Open the Homey app
2. Click the SRT321 icon
3. Click the cog wheel in the top right corner
4. Click Advanced Settings
5. Under Group 3, you can add a comma separated list of the unit id's of the units that you want to be controlled. Example: 37,38

Hope that helps!