6dofimu13

\mainpage Main Page

---

6DOF IMU 13 click

6DOF IMU 13 Click is a compact add-on board that contains an eCompass that consists of a 3-axis linear accelerometer and a 3-axis magnetic field sensor. This board features the MC6470, an accelerometer and magnetometer for a 6 DoF (6 Degrees of Freedom) sensor solution, from mCube Inc.

click Product page

---

Click library

• Author : Stefan Filipovic
• Date : May 2021.
• Type : I2C type

Software Support

We provide a library for the 6DOFIMU13 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for 6DOFIMU13 Click driver.

Standard key functions :

• c6dofimu13_cfg_setup Config Object Initialization function.

void c6dofimu13_cfg_setup ( c6dofimu13_cfg_t *cfg );

• c6dofimu13_init Initialization function.

C6DOFIMU13_RETVAL c6dofimu13_init ( c6dofimu13_t *ctx, c6dofimu13_cfg_t *cfg );

• c6dofimu13_default_cfg Click Default Configuration function.

void c6dofimu13_default_cfg ( c6dofimu13_t *ctx );

Example key functions :

• c6dofimu13_mag_get_data This function reads magnetometer X, Y, and Z-Axis data.

err_t c6dofimu13_mag_get_data ( c6dofimu13_t *ctx, float *mag_x, float *mag_y, float *mag_z );

• c6dofimu13_accel_init This function initializes accelerometer.

err_t c6dofimu13_accel_init ( c6dofimu13_t *ctx, uint8_t samp_rate, uint8_t samp_range, uint8_t samp_res );

• c6dofimu13_accel_get_data This function reads accelerometer X, Y, and Z-Axis data.

err_t c6dofimu13_accel_get_data ( c6dofimu13_t *ctx, float *accel_x, float *accel_y, float *accel_z );

Example Description

This example demonstrates the use of 6DOF IMU 13 click board.

The demo application is composed of two sections :

Application Init

Initializes the driver, and sets the device default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    c6dofimu13_cfg_t c6dofimu13_cfg;  /**< Click config object. */

    // Logger initialization.

    LOG_MAP_USB_UART( log_cfg );
    log_cfg.level = LOG_LEVEL_DEBUG;
    log_cfg.baud = 115200;
    log_init( &logger, &log_cfg );
    Delay_ms( 100 );

    log_info( &logger, " Application Init " );

    // Click initialization.

    c6dofimu13_cfg_setup( &c6dofimu13_cfg );
    C6DOFIMU13_MAP_MIKROBUS( c6dofimu13_cfg, MIKROBUS_1 );
    err_t init_flag = c6dofimu13_init( &c6dofimu13, &c6dofimu13_cfg );
    if ( init_flag == I2C_MASTER_ERROR ) 
    {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );

        for ( ; ; );
    }

    c6dofimu13_default_cfg ( &c6dofimu13 );
    log_info( &logger, " Application Task " );
}

Application Task

Measures acceleration and magnetometer data and displays the results on the USB UART every second.

void application_task ( void )
{
    float acc_x, acc_y, acc_z;
    float mag_x, mag_y, mag_z;

    c6dofimu13_accel_get_data( &c6dofimu13, &acc_x, &acc_y, &acc_z );
    c6dofimu13_mag_get_data( &c6dofimu13, &mag_x, &mag_y, &mag_z );

    log_printf( &logger, " Accel X: %.3f g\t Mag X: %.2f uT\r\n", acc_x, mag_x );
    log_printf( &logger, " Accel Y: %.3f g\t Mag Y: %.2f uT\r\n", acc_y, mag_y );
    log_printf( &logger, " Accel Z: %.3f g\t Mag Z: %.2f uT\r\n", acc_z, mag_z );
    log_printf( &logger, "----------------------------------\r\n");

    Delay_ms( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.6DOFIMU13

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---