HackRF Pro failing self test after upgrade to 2026.01.3 #1696
Description
What outcome were you hoping for?
Just received a Hackrf Pro. Hoping to get it working consistently. Hoping for some insight as to what I have done wrong and didn't see any other answers that were the same as this issue.
What outcome actually happened?
Initially had the HackRF Pro working with GnuRadio Companion and Airspy using Win 11. Shut down the PC, rebooted later and neither would work. The HackRF Pro lights appear normal, it is recognized by Windows but no data was analyzed by either GnuRadio Companion or Airspy. Tried updating to version 2026.01.3 abd now the unit fails the self test. Tried on two different PCs running Win 11.
What operating systems are you seeing the problem on?
Windows 11
What is the output of hackrf_info?
hackrf_info version: 2026.01.3
libhackrf version: 2026.01.3 (0.9.2)
Found HackRF
Index: 0
Serial number: 0000000000000000977c64de31245f13
Board ID Number: 5 (HackRF Pro)
Firmware Version: 2026.01.3 (API:1.10)
Part ID Number: 0xa0000a30 0x00584f5e
Hardware Revision: r1.2
Hardware appears to have been manufactured by Great Scott Gadgets.
Hardware supported by installed firmware:
HackRF Pro
Self-test FAIL:
Mixer: RFFC5072, ID: 4416, Rev: 1, Locks: 111 (PASS)
Clock: Si5351, Rev: 1, readback: OK
Transceiver: MAX2831, RSSI mux test: FAIL
FPGA configuration: FAIL
FPGA SPI: SKIP
SGPIO RX test: SKIP
Loopback test: SKIP
0:0,0,0,0,0,0
1:0,0,0,0,0,0
2:0,0,0,0,0,0
3:0,0,0,0,0,0
There are 3 other devices on the same USB bus.
You may have problems at high sample rates.
Are you using any third-party software?
GnuRadio, radioconda (Airpsy)
Are you using any third-party hardware?
no