Hi,
When I power on radio receiver I got 2 popup window error message showing:
There was a problem: USB write failed (length 0x64000), rc=1, lastErrorMessege="Transfer failed".
When I launch rtl_fm I can listen to the radio and see the folowing message
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM
Detached kernel driver
Found Rafael Micro R820T tuner
Tuner gain set to automatic.
Tuned to 89855000 Hz.
oversampling input by: 6x.
Oversampling output by: 1x.
Buffer size: 8.03ms
Exact sample rate is: 1020000.026345 Hz
Create UDP thread
Created UDP thread
Main socket started! :-) Tuning enabled on UDP/6020
Sampling at 1020000 S/s.
Output at 170000 Hz.
Do you have any idea of where this pb could come from?
Thanks for your help
Hi,
When I power on radio receiver I got 2 popup window error message showing:
There was a problem: USB write failed (length 0x64000), rc=1, lastErrorMessege="Transfer failed".
When I launch rtl_fm I can listen to the radio and see the folowing message
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM
Detached kernel driver
Found Rafael Micro R820T tuner
Tuner gain set to automatic.
Tuned to 89855000 Hz.
oversampling input by: 6x.
Oversampling output by: 1x.
Buffer size: 8.03ms
Exact sample rate is: 1020000.026345 Hz
Create UDP thread
Created UDP thread
Main socket started! :-) Tuning enabled on UDP/6020
Sampling at 1020000 S/s.
Output at 170000 Hz.
Do you have any idea of where this pb could come from?
Thanks for your help