Skip to content

Latest commit

 

History

History
68 lines (59 loc) · 9.19 KB

XiqRpRadioUsageOptimization.md

File metadata and controls

68 lines (59 loc) · 9.19 KB

extremecloudiq.model.xiq_rp_radio_usage_optimization.XiqRpRadioUsageOptimization

The payload of config for the radio profile

Model Type Info

Input Type Accessed Type Description Notes
dict, frozendict.frozendict, frozendict.frozendict, The payload of config for the radio profile

Dictionary Keys

Key Input Type Accessed Type Description Notes
update_time str, datetime, str, The last update time value must conform to RFC-3339 date-time
create_time str, datetime, str, The create time value must conform to RFC-3339 date-time
id decimal.Decimal, int, decimal.Decimal, The unique identifier value must be a 64 bit integer
preamble str, str, The preamble data length -- "AUTO" or "LONG" [optional]
beacon_period decimal.Decimal, int, decimal.Decimal, The amount of time between beacons from 40 up to 3500. [optional] value must be a 32 bit integer
enable_frame_burst bool, BoolClass, Whether to enable Frame Burst [optional]
enable_smart_antenna bool, BoolClass, Whether to enable Smart Antenna (Enabling this option will disable (Null) for MU-MIMO) [optional]
enable_backhaul_failover bool, BoolClass, Whether to enable backhaul failover. Backhaul failover settings determine the thresholds at which the device switches from a wired to a wireless backhaul link, and the thresholds at which the device switches back [optional]
wireless_backhaul_switch_trigger_time decimal.Decimal, int, decimal.Decimal, Switch to Wireless Backhaul after 1 up to 5 seconds after the wired link fails [optional] value must be a 32 bit integer
wired_backhaul_revert_hold_time decimal.Decimal, int, decimal.Decimal, Revert Back to Wired Backhaul after 1 up to 300 seconds after the wired link is established [optional] value must be a 32 bit integer
enable_band_steering bool, BoolClass, Whether to enable band steering. Enabling steers clients from 2.4 GHz to 5.0 GHz radio band [optional]
band_steering_mode str, str, The band steering mode -- "BALANCE", "URGE_5G", or "ENFORCE_5G" [optional]
ignore_initial_client_connection_number decimal.Decimal, int, decimal.Decimal, The number of connection attempts from 1 to 100 for 2.4 GHz clients to ignore before responding for URGE_5G steering mode. [optional] value must be a 32 bit integer
enable_client_load_balancing bool, BoolClass, Whether to enable client load balancing. Enabling load-balances clients across neighboring Extreme Networks within the same hive. Set WiFi0 and WiFi1 radios to the same load balancing mode when it is based on the number of associated stations. [optional]
load_balancing_mode str, str, The client load balancing mode -- "AIRTIME_BASED" or "CLIENT_NUMBER" [optional]
crc_error_rate_per_device decimal.Decimal, int, decimal.Decimal, The CRC Error rate threshold from 1 up to 99 for "AIRTIME_BASED" load balancing. Ignore probe and association requests per device when CRC Error rate exceeds the threshold. [optional] value must be a 32 bit integer
rf_interference_per_device decimal.Decimal, int, decimal.Decimal, The RF Interference threshold from 1 up to 99 for "AIRTIME_BASED" load balancing. Ignore probe and association requests per device when RF Interference exceeds the threshold. [optional] value must be a 32 bit integer
average_airtime_per_client decimal.Decimal, int, decimal.Decimal, The Average Airtime Per Client threshold from 1 up to 5 for "AIRTIME_BASED" load balancing. Ignore probe and association requests per device when Average Airtime Per Client exceeds the threshold. [optional] value must be a 32 bit integer
anchor_period decimal.Decimal, int, decimal.Decimal, The Anchor Period from 10 up to 600 for both "AIRTIME_BASED" and "CLIENT_NUMBER" load balancing. Ignore probe and association requests from clients associated with other Extreme Networks devices until Anchor Period Eelapses in the range of 10 to 600 seconds [optional] value must be a 32 bit integer
neighbor_query_interval decimal.Decimal, int, decimal.Decimal, In both client load balancing modes, query neighbors about client load every 1 up to 600 seconds [optional] value must be a 32 bit integer
enable_weak_signal_probe_request_suppression bool, BoolClass, Whether to enable Weak Signal Probe Request Suppression. Weak Signal Probe Request Suppression allows the configuration of signal-to-noise threshold beyond which the device does not respond to client probes. [optional]
weak_snr_threshold decimal.Decimal, int, decimal.Decimal, The signal to noise threshold from 1 up to 100 for Weak Signal Probe Request Suppression. [optional] value must be a 32 bit integer
enable_safety_net bool, BoolClass, Whether to enable Safety Net. When a device is overloaded or is probed by clients with a low signal-to-noise ratio, Safety Net allows the device to respond to association requests after a certain time period lapses. [optional]
safety_net_period decimal.Decimal, int, decimal.Decimal, The Safety Net Time Period from 5 up to 300 seconds. [optional] value must be a 32 bit integer
enable_high_density bool, BoolClass, Whether to enable High Density Configuration. Enabling optimizes performance in high density environments [optional]
management_frame_basic_data_rate str, str, The data rates to support in high density environment -- "HIGH" or "LOW" [optional]
enable_suppress_successive_probe_request bool, BoolClass, Whether to Reduce Response to Probe Requests. Enabling suppresses successive requests within the same beacon interval [optional]
probe_response_reduction_option str, str, The suppress response to broadcast probes options -- "ONLY_ONE_SSID_RESPOND_AT_A_TIME" (allowed for only one SSID to respond at a time), "REDUCE_CERTAIN_CLIENTS_RESPONSE" (reducing responses to certain client devices). [optional]
suppression_limit decimal.Decimal, int, decimal.Decimal, The Number of Connection Attempts from 1 up to 10 [optional] value must be a 32 bit integer
enable_radio_balance bool, BoolClass, Whether to enable Radio Load Balancing. Enabling distributes wireless clients that support 5 GHz band evenly across the two radios in Dual-5G mode when an SSID is available on both radios [optional]
enable_ampdu bool, BoolClass, Enable Aggregate MAC Protocol Data Units to combine data frames into larger frames before transmission. [optional]
enable_mu_mimo bool, BoolClass, Whether to enable Multiple-Input Multiple-Output (802.11ac & 802.11ax) for multiple-user access by using different spatial streams. [optional]
enable_ofdma_down_link bool, BoolClass, Whether to enable OFDMA for AP downlink communication. [optional]
enable_ofdma_up_link bool, BoolClass, Whether to enable OFDMA for AP uplink communication. [optional]
bss_coloring decimal.Decimal, int, decimal.Decimal, Whether to enable BSS Coloring (802.11ax ) to identify overlapping basic service sets (OBSSs). [optional] value must be a 32 bit integer
enable_target_weak_time bool, BoolClass, Whether to enable Target Weak Time. [optional]
mac_ouis list, tuple, tuple, The device vendor identifiers for the "REDUCE_CERTAIN_CLIENTS_RESPONSE" for the probe response reduction option [optional]
ratio_for_5g_clients decimal.Decimal, int, decimal.Decimal, The percentage distribution from 1 up to 100 for 2.4 and 5.0 GHz clients for "BALANCE" steering mode. [optional] value must be a 32 bit integer
any_string_name dict, frozendict.frozendict, str, date, datetime, int, float, bool, decimal.Decimal, None, list, tuple, bytes, io.FileIO, io.BufferedReader frozendict.frozendict, str, BoolClass, decimal.Decimal, NoneClass, tuple, bytes, FileIO any string name can be used but the value must be the correct type [optional]

mac_ouis

The device vendor identifiers for the "REDUCE_CERTAIN_CLIENTS_RESPONSE" for the probe response reduction option

Model Type Info

Input Type Accessed Type Description Notes
list, tuple, tuple, The device vendor identifiers for the "REDUCE_CERTAIN_CLIENTS_RESPONSE" for the probe response reduction option

Tuple Items

Class Name Input Type Accessed Type Description Notes
XiqRpMacOuiProfile XiqRpMacOuiProfile XiqRpMacOuiProfile

[Back to Model list] [Back to API list] [Back to README]