Description
Board
ESP32 CHIP
Device Description
ESP32 One : https://www.waveshare.com/wiki/ESP32_One
Hardware Configuration
OV2460 Camera with SD Card reader, Classic BT and TLS enabled
Version
latest master (checkout manually)
IDE Name
ESP-IDF v5.3
Operating System
Windows 11
Flash frequency
40 Mhz
PSRAM enabled
yes
Upload speed
115200
Description
I am currently using an A2DP library : https://github.com/pschatzmann/arduino-audio-tools
This library need arduino-eps32 to run some of it's program and also i had initially written my code on Arduino IDE and then migrated to ESP-IDF.
I went through this related issue with the same error : #3436
This has put me in doubt that if the issue above is solved in the latest version of esp-idf , if not , there is a workaround provided in the issue but I am not sure how to use it in my case.
Sketch
#define HELIX_LOGGING_ACTIVE false
#include "AudioTools.h"
#include "AudioTools/AudioLibs/A2DPStream.h"
#include "AudioTools/AudioLibs/AudioSourceSDFAT.h"
#include "AudioTools/AudioCodecs/CodecMP3Helix.h"
const char *startFilePath="/music/";
const char* ext="mp3";
AudioSourceSDFAT source(startFilePath, ext, 15);
A2DPStream out;
MP3DecoderHelix decoder;
AudioPlayer player(source, out, decoder);
void setup() {
Serial.begin(115200);
AudioToolsLogger.begin(Serial, AudioToolsLogLevel::Warning);
// setup player
// Setting up SPI if necessary with the right SD pins by calling
SPI.begin(14, 12, 13, 15);
player.setVolume(0.8);
player.begin();
// setup output - We send the test signal via A2DP - so we conect to a Bluetooth Speaker
auto cfg = out.defaultConfig(TX_MODE);
cfg.silence_on_nodata = true; // prevent disconnect when there is no audio data
cfg.name = "CLIP 5"; // set the device here. Otherwise the first available device is used for output
//cfg.auto_reconnect = true; // if this is use we just quickly connect to the last device ignoring cfg.name
out.begin(cfg);
}
void loop() {
player.copy();
}Debug Message
Please go through this issue I created in : https://github.com/pschatzmann/arduino-audio-tools/issues/1977
Other Steps to Reproduce
Pleas apply this configuration: https://github.com/pschatzmann/ESP32-A2DP/wiki/Espressif-IDF-as-a-Component
and it should lead you to the error i am stuck with.
I have checked existing issues, online documentation and the Troubleshooting Guide
- I confirm I have checked existing issues, online documentation and Troubleshooting guide.