configure.ac

dnl  Autoconf script for GNU Emacs
dnl To rebuild the 'configure' script from this, execute the command
dnl	autoconf
dnl in the directory containing this script.
dnl If you changed any AC_DEFINES, also run autoheader.
dnl
dnl Copyright (C) 1994-1996, 1999-2026 Free Software Foundation, Inc.
dnl
dnl  This file is part of GNU Emacs.
dnl
dnl  GNU Emacs is free software: you can redistribute it and/or modify
dnl  it under the terms of the GNU General Public License as published by
dnl  the Free Software Foundation, either version 3 of the License, or
dnl  (at your option) any later version.
dnl
dnl  GNU Emacs is distributed in the hope that it will be useful,
dnl  but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
dnl  GNU General Public License for more details.
dnl
dnl  You should have received a copy of the GNU General Public License
dnl  along with GNU Emacs.  If not, see <https://www.gnu.org/licenses/>.

AC_PREREQ([2.65])
dnl Note this is parsed by (at least) make-dist and lisp/cedet/ede/emacs.el.
AC_INIT([GNU Emacs], [31.0.50], [bug-gnu-emacs@gnu.org], [],
  [https://www.gnu.org/software/emacs/])

if test "$XCONFIGURE" = "android"; then
  # configure is being called recursively to configure Emacs for
  # Android!
  AC_MSG_NOTICE([called to recursively configure Emacs for Android.])
  # Set CC to ANDROID_CC and CFLAGS to ANDROID_CFLAGS.
  CC=$ANDROID_CC
  # Set -Wno-implicit-function-declaration.  Building Emacs for older
  # versions of Android requires configure tests to fail if the
  # functions are not defined, as the Android library in the NDK
  # defines subroutines that are not available in the headers being
  # used.
  CFLAGS="$ANDROID_CFLAGS -Werror=implicit-function-declaration"
  # Don't explicitly enable support for large files unless Emacs is
  # being built for API 21 or later.  Otherwise, mmap does not work.
  #
  # Moreover, 64-bit variants of file IO functions in the C library are
  # liable to fail with ENOSYS or EINVAL on earlier API versions, and as
  # such their definitions must be explicitly disabled on NDK releases
  # that enable them by default.
  AS_IF([test "$ANDROID_SDK" -lt "21"], [
    CFLAGS="$CFLAGS -D_FILE_OFFSET_BITS=32"
    enable_largefile=no
    enable_year2038=no])
  # C23 cannot be enabled for Android builds on account of
  # incompatibilities in many external dependencies (glib, librsvg,
  # etc.) and system headers.
  ac_cv_prog_cc_c23=no
fi

dnl Set emacs_config_options to the options of 'configure', quoted for the shell,
dnl and then quoted again for a C string.  Separate options with spaces.
dnl Add some environment variables, if they were passed via the environment
dnl rather than on the command-line.
emacs_config_options=
optsep=
dnl This is the documented way to record the args passed to configure,
dnl rather than $ac_configure_args.
for opt in "$@" CFLAGS CPPFLAGS LDFLAGS; do
  case $opt in
    -n | --no-create | --no-recursion)
      continue ;;
    CFLAGS | CPPFLAGS | LDFLAGS)
      eval 'test "${'$opt'+set}" = set' || continue
      case " $*" in
	*" $opt="*) continue ;;
      esac
      eval opt=$opt=\$$opt ;;
  esac

  emacs_shell_specials=$IFS\''"#$&()*;<>?@<:@\\`{|~'
  case $opt in
    *[["$emacs_shell_specials"]]*)
      case $opt in
	*\'*)
	  emacs_quote_apostrophes="s/'/'\\\\''/g"
	  opt=`AS_ECHO(["$opt"]) | sed "$emacs_quote_apostrophes"` ;;
      esac
      opt="'$opt'"
      case $opt in
	*[['"\\']]*)
	  emacs_quote_for_c='s/[["\\]]/\\&/g; $!s/$/\\n\\/'
	  opt=`AS_ECHO(["$opt"]) | sed "$emacs_quote_for_c"` ;;
      esac ;;
  esac
  AS_VAR_APPEND([emacs_config_options], ["$optsep$opt"])
  optsep=' '
done

AC_CONFIG_HEADERS([src/config.h:src/config.in])
AC_CONFIG_SRCDIR([src/lisp.h])
AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_MACRO_DIR([m4])

xcsdkdir=
AC_CHECK_PROGS([XCRUN], [xcrun])
if test -n "$XCRUN"; then
  if test -z "$MAKE"; then
    dnl Call the variable MAKE_PROG, not MAKE, to avoid confusion with
    dnl the usual MAKE variable that 'make' itself uses.
    AC_CHECK_PROG([MAKE_PROG], [make], [yes])
    if test -z "$MAKE_PROG"; then
      MAKE="$XCRUN MAKE"
      export MAKE
      xcsdkdir=`$XCRUN --show-sdk-path 2>/dev/null`
    fi
  fi
fi

dnl Check for GNU Make and possibly set MAKE.
[emacs_check_gnu_make ()
{
  emacs_makeout=`($1 --version) 2>/dev/null` &&
  case $emacs_makeout in
    'GNU Make '3.8[1-9]* | 'GNU Make '3.9[0-9]* | \
    'GNU Make '3.[1-9][0-9][0-9]* | 'GNU Make '[4-9]* | 'GNU Make '[1-9][0-9]* )
       ac_path_MAKE_found=:;;
  esac
}]
AC_CACHE_CHECK([for GNU Make], [ac_cv_path_MAKE],
  [ac_path_MAKE_found=false
   if test -n "$MAKE"; then
     emacs_check_gnu_make "$MAKE"
     ac_cv_path_MAKE=$MAKE
   else
     emacs_tried_make=false
     emacs_tried_gmake=false
     emacs_tried_gnumake=false
     AC_PATH_PROGS_FEATURE_CHECK([MAKE], [make gmake gnumake],
       [[emacs_check_gnu_make "$ac_path_MAKE"
	 if $ac_path_MAKE_found; then
	   # Use the fully-qualified program name only if the basename
	   # would not resolve to it.
	   if eval \$emacs_tried_$ac_prog; then
	     ac_cv_path_MAKE=$ac_path_MAKE
	   else
	     ac_cv_path_MAKE=$ac_prog
	   fi
	 fi
	 eval emacs_tried_$ac_prog=:]])
   fi])
$ac_path_MAKE_found || {
AC_MSG_ERROR([[Building Emacs requires GNU Make, at least version 3.81.
If you have it installed under another name, configure with 'MAKE=...'.
For example, run '$0 MAKE=gnu-make'.]])
}
MAKE=$ac_cv_path_MAKE
export MAKE

dnl Canonicalize the configuration name.
if test "$XCONFIGURE" = "android"; then
  dnl Set host to whatever Android system Emacs is being configured
  dnl for.  Determine this by looking at the output of ANDROID_CC.

  AC_MSG_CHECKING([the cross-compiler's target])
  cc_target=`${CC} -v 2>&1 | sed -n 's/Target: //p'`
  case "$cc_target" in
    *android*) host_alias=$cc_target
    ;;
    *) AC_MSG_ERROR([The cross compiler does not compile for Android.
Please verify that you specified the correct compiler in the ANDROID_CC
variable when you ran configure.])
    ;;
  esac
  AC_MSG_RESULT([$host_alias])
fi

AC_CANONICAL_HOST
AC_CANONICAL_BUILD

AS_IF([test "$XCONFIGURE" = "android"],[
  # Initialize the Android NDK build system.  Make sure to use the
  # passed through NDK path.
  # Make sure to pass through the CFLAGS, as older versions of the
  # NDK require them to be able to find system includes.
  with_ndk_path="$android_ndk_path"
  with_ndk_cxx="$android_ndk_cxx"
  ndk_INIT([$android_abi], [$ANDROID_SDK], [cross/ndk-build],
           [$ANDROID_CFLAGS])

  # At the same time, configure libexec with the build directory
  # set to `exec'.
  AS_MKDIR_P([exec])

  # Enter exec and configure it, using the C compiler as both the
  # assembler and the linker; it is for this reason that
  # AC_CONFIG_SUBDIRS is not suitable in this context.  Establish the
  # absolute name of the source directory.
  # N.B. that the linker is actually cc, so pass -nostdlib, lest
  # the crt be linked in.  Likewise for as.

  AS_CASE([$srcdir], [.], [emacs_srcdir=`pwd`],
    [[[\\/]* | ?:[\\/]*]], [emacs_srcdir=$srcdir],
    [*], [emacs_srcdir=`pwd`/$srcdir])

  AC_MSG_NOTICE([configuring in `exec'])

  # Derive a name for a cache file for this configure script from the
  # current, if specified.
  exec_cache_file=
  AS_CASE([$cache_file], [/dev/null | ""], [],
    [[[\\/]* | ?:[\\/]*]], [exec_cache_file="--cache-file=$cache_file.2"],
    [*], [exec_cache_file="--cache-file=../$cache_file.2"])
  OLDCWD=`pwd`
  cd exec
  $CONFIG_SHELL $emacs_srcdir/exec/configure		\
		--host=$host "CC=$CC" "LD=$CC" "AS=$CC"	\
		"AR=$AR" "CFLAGS=$CFLAGS" $exec_cache_file
  emacs_val=$?
  cd $OLDCWD

  AS_IF([test "$emacs_val" != "0"],
    [AC_MSG_ERROR([failed to configure in `exec'])])
])

case $host in
 *-mingw*)

  if test -z "$host_alias"; then

      # No --host argument was given to 'configure'; therefore $host
      # was set to a default value based on the build platform.  But
      # this default value may be wrong if we are building from a
      # 64-bit MSYS[2] pre-configured to build 32-bit MinGW programs.
      # Therefore, we'll try to get the right host platform from the
      # compiler's target.

      AC_MSG_CHECKING([the compiler's target])
      if test -z "$CC"; then
	  cc=gcc
      else
	  cc=$CC
      fi
      cc_target=`$cc -v 2>&1 | sed -n 's/Target: //p'`
      case "$cc_target" in
          *-*) host=$cc_target
	      ;;
          "") AC_MSG_ERROR([Impossible to obtain $cc compiler target.
Please explicitly provide --host.])
              ;;
	  *) AC_MSG_WARN([Compiler reported non-standard target.
Defaulting to $host.])
              ;;
      esac
      AC_MSG_RESULT([$host])
  fi

  . $srcdir/nt/mingw-cfg.site

  case $srcdir in
    /* | ?:*)
      # srcdir is an absolute path.  In this case, force the format
      # "/c/foo/bar", to simplify later conversions to native Windows
      # format ("c:/foo/bar").
      srcdir=`cd "${srcdir}" && pwd -W`
      # 'eval' pacifies strict POSIX non-MinGW shells (Bug#18612).
      # We downcase the drive letter to avoid warnings when
      # generating autoloads.
      eval 'srcdir=/`echo ${srcdir:0:1} | sed "y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/"`"${srcdir:2}"'
      ;;
  esac;;
esac

canonical=$host
configuration=${host_alias-${build_alias-$host}}
emacs_uname_r=`uname -r`

dnl Support for --program-prefix, --program-suffix and
dnl --program-transform-name options
AC_ARG_PROGRAM

dnl It is important that variables on the RHS not be expanded here,
dnl hence the single quotes.  This is per the GNU coding standards, see
dnl (autoconf) Installation Directory Variables
dnl See also epaths.h below.
lispdirrel='${version}/lisp'
lispdir='${datadir}/emacs/'${lispdirrel}
standardlisppath='${lispdir}'
locallisppath='${datadir}/emacs/${version}/site-lisp:'\
'${datadir}/emacs/site-lisp'
lisppath='${locallisppath}:${standardlisppath}'
etcdir='${datadir}/emacs/${version}/etc'
archlibdir='${libexecdir}/emacs/${version}/${configuration}'
etcdocdir='${datadir}/emacs/${version}/etc'
gamedir='${localstatedir}/games/emacs'

dnl Special option to disable the most of other options.
AC_ARG_WITH([all],
[AS_HELP_STRING([--without-all],
		[omit almost all features and build
		small executable with minimal dependencies])],
  [with_features=$withval],
  [with_features=yes])

dnl ARCH_INDEPENDENT_CONFIG_FILES(FILE...)
dnl Like AC_CONFIG_FILES(FILE).  However, do not generate this
dnl   if configure is being called recursively in preparation
dnl   for cross-compilation.
AC_DEFUN([ARCH_INDEPENDENT_CONFIG_FILES], [
  AS_IF([test "$XCONFIGURE" != "android"], [AC_CONFIG_FILES([$1])])])

dnl OPTION_DEFAULT_OFF(NAME, HELP-STRING)
dnl Create a new --with option that defaults to being disabled.
dnl NAME is the base name of the option.  The shell variable with_NAME
dnl   will be set to either the user's value (if the option is
dnl   specified; 'yes' for a plain --with-NAME) or to 'no' (if the
dnl   option is not specified).  Note that the shell variable name is
dnl   constructed as autoconf does, by replacing non-alphanumeric
dnl   characters with "_".
dnl HELP-STRING is the help text for the option.
AC_DEFUN([OPTION_DEFAULT_OFF], [dnl
  AC_ARG_WITH([$1],[AS_HELP_STRING([--with-$1],[$2])],[],[dnl
    m4_bpatsubst([with_$1], [[^0-9a-z]], [_])=no])dnl
])dnl

dnl OPTION_DEFAULT_IFAVAILABLE(NAME, HELP-STRING)
dnl Create a new --with option that defaults to 'ifavailable',
dnl unless it is overridden by $with_features being equal to 'no'.
dnl NAME is the base name of the option.  The shell variable with_NAME
dnl   will be set to either the user's value (if the option is
dnl   specified; 'yes' for a plain --with-NAME) or to 'ifavailable' (if the
dnl   option is not specified).  Note that the shell variable name is
dnl   constructed as autoconf does, by replacing non-alphanumeric
dnl   characters with "_".
dnl HELP-STRING is the help text for the option.
AC_DEFUN([OPTION_DEFAULT_IFAVAILABLE], [dnl
  AC_ARG_WITH([$1],[AS_HELP_STRING([--with-$1],[$2])],[],[dnl
    AS_IF([test "$with_features" != no],
      [m4_bpatsubst([with_$1], [[^0-9a-z]], [_])=ifavailable],
      [m4_bpatsubst([with_$1], [[^0-9a-z]], [_])=no])dnl
  ])dnl
])dnl

dnl OPTION_DEFAULT_ON(NAME, HELP-STRING)
dnl Create a new --with option that defaults to $with_features.
dnl NAME is the base name of the option.  The shell variable with_NAME
dnl   will be set either to 'no' (for a plain --without-NAME) or to
dnl   'yes' (if the option is not specified).  Note that the shell
dnl   variable name is constructed as autoconf does, by replacing
dnl   non-alphanumeric characters with "_".
dnl HELP-STRING is the help text for the option.
AC_DEFUN([OPTION_DEFAULT_ON], [dnl
  AC_ARG_WITH([$1],[AS_HELP_STRING([--without-$1],[$2])],[],[dnl
   m4_bpatsubst([with_$1], [[^0-9a-z]], [_])=$with_features])dnl
])dnl

# For retrieving mail, unencrypted network connections are the default
# only on native MS-Windows platforms.  (FIXME: These platforms should
# also be secure by default.)

AC_ARG_WITH([mailutils],
  [AS_HELP_STRING([--with-mailutils],
     [rely on GNU Mailutils, so that the --without-pop through --with-mailhost
      options are irrelevant; this is the default if GNU Mailutils is
      installed])],
  [],
  [AS_IF([test "$with_features" != "no"],
   [with_mailutils=yes-unless-android
    AS_IF([test "x$XCONFIGURE" != "xandroid"],
     [(movemail --version) >/dev/null 2>&1 || with_mailutils=no],
     [dnl Don't check for movemail if cross-compiling.
      dnl instead, default to false.
      with_mailutils=no])])])

AC_ARG_WITH([pop],
  [AS_HELP_STRING([--with-pop],
     [Support POP mail retrieval if Emacs movemail is used (not recommended,
      as Emacs movemail POP is insecure).  This is the default only on
      native MS-Windows and Android.])],
  [],
  dnl Enable movemail POP support on Android as GNU Mailutils is
  dnl normally unavailable on that platform.
  [AS_CASE([$host],
     [*-mingw*|*android*], [with_pop=yes],
     [with_pop=no-by-default])])
if test "$with_pop" = yes; then
   AC_DEFINE([MAIL_USE_POP])
fi
AH_TEMPLATE([MAIL_USE_POP], [Define to support POP mail retrieval.])dnl

OPTION_DEFAULT_OFF([kerberos],[support Kerberos-authenticated POP])
if test "$with_kerberos" != no; then
   AC_DEFINE([KERBEROS])
fi
AH_TEMPLATE([KERBEROS],
	    [Define to support Kerberos-authenticated POP mail retrieval.])dnl

OPTION_DEFAULT_OFF([kerberos5],[support Kerberos version 5 authenticated POP])
if test "${with_kerberos5}" != no; then
  if test "${with_kerberos}" = no; then
    with_kerberos=yes
    AC_DEFINE([KERBEROS])
  fi
  AC_DEFINE([KERBEROS5], [1],
    [Define to use Kerberos 5 instead of Kerberos 4.])
fi

OPTION_DEFAULT_OFF([hesiod],[support Hesiod to get the POP server host])
dnl FIXME hesiod support may not be present, so it seems like an error
dnl to define, or at least use, this unconditionally.
if test "$with_hesiod" != no; then
  AC_DEFINE([HESIOD], [1],
    [Define to support using a Hesiod database to find the POP server.])
fi

OPTION_DEFAULT_OFF([mail-unlink],[unlink, rather than empty, mail spool after reading])
if test "$with_mail_unlink" != no; then
   AC_DEFINE([MAIL_UNLINK_SPOOL], [1],
     [Define to unlink, rather than empty, mail spool after reading.])
fi

AC_ARG_WITH([mailhost],[AS_HELP_STRING([--with-mailhost=HOSTNAME],
    [string giving default POP mail host])],
    AC_DEFINE_UNQUOTED([MAILHOST], ["$withval"],
      [String giving fallback POP mail host.]))

AC_ARG_WITH([sound],[AS_HELP_STRING([--with-sound=VALUE],
  [compile with sound support (VALUE one of: yes, alsa, oss, bsd-ossaudio, no;
default yes).  Only for GNU/Linux, FreeBSD, NetBSD, MinGW, Cygwin.])],
  [ case "${withval}" in
      yes|no|alsa|oss|bsd-ossaudio) val=$withval ;;
      *) AC_MSG_ERROR(['--with-sound=$withval' is invalid;
this option's value should be 'yes', 'no', 'alsa', 'oss', or 'bsd-ossaudio'.])
      ;;
    esac
    with_sound=$val
  ],
  [with_sound=$with_features])

AC_ARG_WITH([pdumper],
  AS_HELP_STRING(
    [--with-pdumper=VALUE],
    [enable pdumper support unconditionally
      ('yes', 'no', or 'auto': default 'auto')]),
    [ case "${withval}" in
        yes|no|auto) val=$withval ;;
        *) AC_MSG_ERROR(
           ['--with-pdumper=$withval' is invalid;
this option's value should be 'yes' or 'no'.]) ;;
      esac
      with_pdumper=$val
    ],
    [with_pdumper=auto])

AC_ARG_WITH([dumping],[AS_HELP_STRING([--with-dumping=VALUE],
    [kind of dumping to use for initial Emacs build
(VALUE one of: pdumper, none; default pdumper)])],
    [ case "${withval}" in
        pdumper|none) val=$withval ;;
        *) AC_MSG_ERROR(['--with-dumping=$withval is invalid;
this option's value should be 'pdumper' or 'none'.])
        ;;
      esac
      with_dumping=$val
    ],
    [with_dumping=pdumper])

if test "$with_pdumper" = "auto"; then
  if test "$with_dumping" = "pdumper"; then
    with_pdumper=yes
  else
    with_pdumper=no
  fi
fi

if test "$with_dumping" = "pdumper" && test "$with_pdumper" = "no"; then
  AC_MSG_ERROR(['--with-dumping=pdumper' requires pdumper support])
fi

if test "$with_pdumper" = "yes"; then
  AC_DEFINE([HAVE_PDUMPER], [1],
    [Define to build with portable dumper support])
  HAVE_PDUMPER=yes
else
  HAVE_PDUMPER=no
fi
AC_SUBST([HAVE_PDUMPER])

DUMPING=$with_dumping
AC_SUBST([DUMPING])

dnl Where the etc/emacs.service file is to be installed.
dnl We use $(prefix)/lib/systemd/user as default, but this may not be
dnl in systemd's search path when prefix is neither /usr nor /usr/local.
dnl In that case (e.g. for non-root installs) the location can be
dnl specified with the configure option.
dnl See https://www.freedesktop.org/software/systemd/man/latest/systemd.unit.html#id-1.8.5
dnl for documentation of systemd's unit file load path.
AC_ARG_WITH([systemduserunitdir],
  [AS_HELP_STRING([--with-systemduserunitdir=DIR],
    [directory for systemd user unit file;
    default 'PREFIX/usr/lib/systemd/user'])],
  [systemduserunitdir=${withval}],
  [systemduserunitdir='${prefix}/lib/systemd/user'])
if test "${systemduserunitdir}" = "no"; then
  systemduserunitdir=''
fi
AC_SUBST([systemduserunitdir])

dnl FIXME currently it is not the last.
dnl This should be the last --with option, because --with-x is
dnl added later on when we find the file name of X, and it's best to
dnl keep them together visually.
AC_ARG_WITH([x-toolkit],[AS_HELP_STRING([--with-x-toolkit=KIT],
 [use an X toolkit (KIT one of: yes or gtk, gtk2, gtk3, lucid or athena, motif, no)])],
[	  case "${withval}" in
	    y | ye | yes )	val=gtk ;;
	    n | no )		val=no  ;;
	    l | lu | luc | luci | lucid )	val=lucid ;;
	    a | at | ath | athe | athen | athena )	val=athena ;;
	    m | mo | mot | moti | motif )	val=motif ;;
	    g | gt | gtk  )	val=gtk ;;
	    gtk2  )	val=gtk2 ;;
	    gtk3  )	val=gtk3 ;;
	    * )
AC_MSG_ERROR(['--with-x-toolkit=$withval' is invalid;
this option's value should be 'yes', 'no', 'lucid', 'athena', 'motif', 'gtk',
'gtk2' or 'gtk3'.  'yes' and 'gtk' are synonyms.
'athena' and 'lucid' are synonyms.])
	    ;;
	  esac
	  with_x_toolkit=$val
])

OPTION_DEFAULT_OFF([wide-int],
  [prefer wide Emacs integers (typically 62-bit);
   on 32-bit hosts, this allows buffer and string size up to 2GB,
   at the cost of 10% to 30% slowdown of Lisp interpreter
   and larger memory footprint])
if test "$with_wide_int" = yes; then
  AC_DEFINE([WIDE_EMACS_INT], [1], [Use long long for EMACS_INT if available.])
fi

dnl _ON results in a '--without' option in the --help output, so
dnl the help text should refer to "don't compile", etc.
with_xpm_set=${with_xpm+set}
OPTION_DEFAULT_ON([xpm],[don't compile with XPM image support])
OPTION_DEFAULT_ON([jpeg],[don't compile with JPEG image support])
OPTION_DEFAULT_ON([tiff],[don't compile with TIFF image support])
OPTION_DEFAULT_ON([gif],[don't compile with GIF image support])
OPTION_DEFAULT_ON([png],[don't compile with PNG image support])
OPTION_DEFAULT_ON([rsvg],[don't compile with SVG image support])
OPTION_DEFAULT_ON([webp],[don't compile with WebP image support])
OPTION_DEFAULT_ON([sqlite3],[don't compile with sqlite3 support])
OPTION_DEFAULT_ON([lcms2],[don't compile with Little CMS support])
OPTION_DEFAULT_ON([libsystemd],[don't compile with libsystemd support])
OPTION_DEFAULT_ON([cairo],[don't compile with Cairo drawing])
OPTION_DEFAULT_OFF([cairo-xcb], [use XCB surfaces for Cairo support])
OPTION_DEFAULT_ON([xml2],[don't compile with XML parsing support])
OPTION_DEFAULT_OFF([imagemagick],[compile with ImageMagick image support])
OPTION_DEFAULT_ON([native-image-api], [don't use native image APIs (GDI+ on Windows)])
OPTION_DEFAULT_IFAVAILABLE([tree-sitter], [compile with tree-sitter])

OPTION_DEFAULT_ON([xft],[don't use XFT for anti aliased fonts])
OPTION_DEFAULT_ON([harfbuzz],[don't use HarfBuzz for text shaping])
OPTION_DEFAULT_ON([libotf],[don't use libotf for OpenType font support])
OPTION_DEFAULT_ON([m17n-flt],[don't use m17n-flt for text shaping])

OPTION_DEFAULT_ON([toolkit-scroll-bars],[don't use Motif/Xaw3d/GTK toolkit scroll bars])
OPTION_DEFAULT_ON([xaw3d],[don't use Xaw3d])
OPTION_DEFAULT_ON([xim],[at runtime, default X11 XIM to off])
OPTION_DEFAULT_ON([xdbe],[don't use X11 double buffering support])
AC_ARG_WITH([ns],[AS_HELP_STRING([--with-ns],
[use Nextstep (macOS Cocoa or GNUstep) windowing system.
On by default on macOS.])],[],[with_ns=maybe])
OPTION_DEFAULT_OFF([w32], [use native MS Windows GUI in a Cygwin build])
OPTION_DEFAULT_OFF([pgtk], [use GTK to support window systems other than X])

OPTION_DEFAULT_ON([gpm],[don't use -lgpm for mouse support on a GNU/Linux console])
OPTION_DEFAULT_IFAVAILABLE([dbus],[compile with D-Bus support])
AC_ARG_WITH([gconf],[AS_HELP_STRING([--with-gconf],
[compile with Gconf support (Gsettings replaces this)])],[],
[if test $with_features = yes; then
with_gconf=maybe
else
with_gconf=no
fi])
OPTION_DEFAULT_ON([gsettings],[don't compile with GSettings support])
dnl Override the AC_ARG_WITH in gl_LIBSELINUX, defaulting to "yes"
dnl if --with-all and to "maybe" otherwise.
AC_ARG_WITH([selinux],
  [AS_HELP_STRING([--without-selinux],
     [do not use SELinux, even on systems with SELinux])],
  [],
  [with_selinux=${with_all-maybe}])
OPTION_DEFAULT_ON([gnutls],[don't use -lgnutls for SSL/TLS support])
OPTION_DEFAULT_ON([zlib],[don't compile with zlib decompression support])
OPTION_DEFAULT_ON([modules],[don't compile with dynamic modules support])
OPTION_DEFAULT_ON([threads],[don't compile with elisp threading support])
OPTION_DEFAULT_OFF([cygwin32-native-compilation],[use native compilation on 32-bit Cygwin])
OPTION_DEFAULT_ON([xinput2],[don't use version 2 of the X Input Extension for input])
OPTION_DEFAULT_OFF([small-ja-dic],[generate a smaller-size Japanese dictionary])
OPTION_DEFAULT_OFF([android],[cross-compile Android application package])
OPTION_DEFAULT_ON([android-debug],[don't build Emacs as a debug package on Android])

# Find out of Android support is enabled and mailutils has defaulted
# to `yes-unless-android'.  Disable it if so.

AS_IF([test "x$with_mailutils" = "xyes-unless-android"],
  [AS_IF([test "x$with_android" != "xno"],
     [with_mailutils=no],
     [with_mailutils=yes])])

# Clear with_mailutils if it's set to no.

AS_IF([test "$with_mailutils" = no],
  [with_mailutils=])

AS_IF([test x"$with_mailutils" = xyes],
  [AC_DEFINE([HAVE_MAILUTILS], [1],
     [Define to 1 if Emacs was configured with mailutils])])

AC_SUBST([with_mailutils])

AC_ARG_WITH([shared-user-id],
  [AS_HELP_STRING([--with-shared-user-id=ID],
    [use the given shared user ID in Android builds])])

AC_ARG_WITH([file-notification],[AS_HELP_STRING([--with-file-notification=LIB],
 [use a file notification library (LIB one of: yes, inotify, kqueue, gfile, w32, no)])],
 [ case "${withval}" in
    y | ye | yes )	val=yes ;;
    n | no )		val=no  ;;
    i | in | ino | inot | inoti | inotif | inotify )	val=inotify ;;
    k | kq | kqu | kque | kqueu | kqueue )	val=kqueue ;;
    g | gf | gfi | gfil | gfile )	val=gfile ;;
    w | w3 | w32 )	val=w32 ;;
    * ) AC_MSG_ERROR(['--with-file-notification=$withval' is invalid;
this option's value should be 'yes', 'no', 'inotify', 'kqueue', 'gfile' or 'w32'.
'yes' is a synonym for 'w32' on MS-Windows, for 'no' on Nextstep,
otherwise for the first of 'inotify', 'kqueue' or 'gfile' that is usable.])
    ;;
   esac
   with_file_notification=$val
 ],
 [with_file_notification=$with_features])

OPTION_DEFAULT_OFF([xwidgets],
  [enable use of xwidgets in Emacs buffers (requires gtk3 or macOS Cocoa)])

OPTION_DEFAULT_OFF([be-app],
  [enable use of Haiku's Application Kit as a window system])

OPTION_DEFAULT_OFF([be-cairo],
  [enable use of cairo under Haiku's Application Kit])

## Makefile.in needs the cache file name.
AC_SUBST([cache_file])

## This is an option because I do not know if all info/man support
## compressed files, nor how to test if they do so.
OPTION_DEFAULT_ON([compress-install],
  [don't compress some files (.el, .info, etc.) when installing.  Equivalent to:
make GZIP_PROG= install])

AC_ARG_WITH([gameuser],
[AS_HELP_STRING([--with-gameuser=USER_OR_GROUP],
		[user for shared game score files.
		An argument prefixed by ':' specifies a group instead.])])
gameuser=
gamegroup=
case ${with_gameuser} in
  '' | no) ;;
  yes) gamegroup=games ;;
  :*) gamegroup=${with_gameuser#:} ;;
  *) gameuser=${with_gameuser} ;;
esac

AC_ARG_WITH([gnustep-conf],
[AS_HELP_STRING([--with-gnustep-conf=FILENAME],
   [name of GNUstep configuration file to use on systems where the command
    'gnustep-config' does not work; default $GNUSTEP_CONFIG_FILE, or
    /etc/GNUstep/GNUstep.conf])])
test "X${with_gnustep_conf}" != X && test "${with_gnustep_conf}" != yes && \
  GNUSTEP_CONFIG_FILE="${with_gnustep_conf}"
test "X$GNUSTEP_CONFIG_FILE" = "X" && \
     GNUSTEP_CONFIG_FILE=/etc/GNUstep/GNUstep.conf

AC_ARG_ENABLE([ns-self-contained],
[AS_HELP_STRING([--disable-ns-self-contained],
                [disable self contained build under NeXTstep])],
   [EN_NS_SELF_CONTAINED=$enableval],
   [EN_NS_SELF_CONTAINED=yes])

locallisppathset=no
AC_ARG_ENABLE([locallisppath],
[AS_HELP_STRING([--enable-locallisppath=PATH],
                [directories Emacs should search for lisp files specific
		 to this site])],
[if test "${enableval}" = "no"; then
  locallisppath=
elif test "${enableval}" != "yes"; then
  locallisppath=${enableval} locallisppathset=yes
fi])

AC_ARG_ENABLE([checking],
[AS_HELP_STRING([--enable-checking@<:@=LIST@:>@],
		[enable expensive checks.  With LIST,
		 enable only specific categories of checks.
		 Categories are: all,yes,no.
		 Flags are: stringbytes, stringoverrun, stringfreelist,
		 structs, glyphs])],
[ac_checking_flags="${enableval}"],[])
IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="$IFS,"
CHECK_STRUCTS=false
for check in $ac_checking_flags
do
	case $check in
	# these set all the flags to specific states
	yes)		ac_enable_checking=1 ;;
	no)		ac_enable_checking= ;
			CHECK_STRUCTS=false
			ac_gc_check_stringbytes= ;
	                ac_gc_check_string_overrun= ;
	                ac_gc_check_string_free_list= ;
			ac_glyphs_debug= ;;
	all)		ac_enable_checking=1 ;
			CHECK_STRUCTS=true
			ac_gc_check_stringbytes=1 ;
	                ac_gc_check_string_overrun=1 ;
	                ac_gc_check_string_free_list=1 ;
			ac_glyphs_debug=1 ;;
	# these enable particular checks
	stringbytes)	ac_gc_check_stringbytes=1 ;;
	stringoverrun)	ac_gc_check_string_overrun=1 ;;
	stringfreelist) ac_gc_check_string_free_list=1 ;;
	structs)	CHECK_STRUCTS=true ;;
	glyphs)		ac_glyphs_debug=1 ;;
	*)	AC_MSG_ERROR([unknown check category $check]) ;;
	esac
done
IFS="$ac_save_IFS"

# This environment variable is used to signal that checking should be
# enabled on Android.  When that happens, simply enable checking for
# the cross-compiled Android binary.

AS_IF([test "x$XCONFIGURE" = "xandroid" \
       && test "x$android_enable_checking" = "xyes"],
  [ac_enable_checking=yes])

# There is little point in enabling checking in the build machine if
# cross-compiling for Android.
AS_IF([test "$with_android" = no || test -n "$XCONFIGURE"],[
  if test x$ac_enable_checking != x ; then
    AC_DEFINE([ENABLE_CHECKING], [1],
  [Define to 1 if expensive run-time data type and consistency checks are enabled.])
  fi
  if $CHECK_STRUCTS; then
    AC_DEFINE([CHECK_STRUCTS], [1],
      [Define this to check whether someone updated the portable dumper
       code after changing the layout of a structure that it uses.
       If you change one of these structures, check that the pdumper.c
       code is still valid, and update the pertinent hash in pdumper.c
       by manually copying the hash from the newly-generated dmpstruct.h.])
  fi
  AC_SUBST([CHECK_STRUCTS])
  if test x$ac_gc_check_stringbytes != x ; then
    AC_DEFINE([GC_CHECK_STRING_BYTES], [1],
  [Define this temporarily to hunt a bug.  If defined, the size of
     strings is redundantly recorded in sdata structures so that it can
     be compared to the sizes recorded in Lisp strings.])
  fi
  if test x$ac_gc_check_string_overrun != x ; then
    AC_DEFINE([GC_CHECK_STRING_OVERRUN], [1],
  [Define this to check for short string overrun.])
  fi
  if test x$ac_gc_check_string_free_list != x ; then
    AC_DEFINE([GC_CHECK_STRING_FREE_LIST], [1],
  [Define this to check the string free list.])
  fi
  if test x$ac_glyphs_debug != x ; then
    AC_DEFINE([GLYPH_DEBUG], [1],
  [Define this to enable glyphs debugging code.])
  fi
],[AS_IF([test "x$ac_enable_checking" != x],
    [android_enable_checking=yes
     export android_enable_checking])])

AC_ARG_ENABLE([gc-mark-trace],
 [AS_HELP_STRING([--disable-gc-mark-trace],
                 [disable the mark trace buffer used for debugging the Emacs
                 garbage collector])],
 [ac_enable_gc_mark_trace="${enableval}"],
 [ac_enable_gc_mark_trace=yes])
if test "x$ac_enable_gc_mark_trace" = xyes ; then
   AC_DEFINE([GC_REMEMBER_LAST_MARKED], [1],
   [Define to 1 to enable GC mark trace buffer.])
fi

dnl The name of this option is unfortunate.  It predates, and has no
dnl relation to, the "sampling-based elisp profiler" added in 24.3.
dnl Actually, it stops it working.
dnl https://lists.gnu.org/r/emacs-devel/2012-11/msg00393.html
AC_ARG_ENABLE([profiling],
[AS_HELP_STRING([--enable-profiling],
		[build emacs with low-level, gprof profiling support.
                Mainly useful for debugging Emacs itself.  May not work on
                all platforms.  Stops profiler.el working.])],
[ac_enable_profiling="${enableval}"],[])
if test x$ac_enable_profiling != x ; then
   PROFILING_CFLAGS="-DPROFILING=1 -pg"
else
   PROFILING_CFLAGS=
fi
AC_SUBST([PROFILING_CFLAGS])

AC_ARG_ENABLE([autodepend],
[AS_HELP_STRING([--enable-autodepend],
		[automatically generate dependencies to .h-files.
		 Requires gcc, enabled if found.])],
[ac_enable_autodepend="${enableval}"],[ac_enable_autodepend=yes])

AC_ARG_ENABLE([gtk-deprecation-warnings],
[AS_HELP_STRING([--enable-gtk-deprecation-warnings],
		[Show Gtk+/Gdk deprecation warnings for Gtk+ >= 3.0])],
[ac_enable_gtk_deprecation_warnings="${enableval}"],[])

BUILD_DETAILS=
AC_ARG_ENABLE([build-details],
  [AS_HELP_STRING([--disable-build-details],
		  [Make the build more deterministic by omitting host
		   names, time stamps, etc. from the output.])],
  [test "$enableval" = no && BUILD_DETAILS=--no-build-details])
AC_SUBST([BUILD_DETAILS])

# JAVA_PUSH_LINT(OPT)
# -------------------
# Check if javac supports the diagnostic flag -Xlint:OPT.
# If it does, add it to WARN_JAVAFLAGS.

AC_DEFUN([JAVA_PUSH_LINT],
[
  AC_CACHE_CHECK([whether Java compiler accepts -Xlint:$1],
    [emacs_cv_javac_knows_lint_$1],
    AS_IF([rm -f conftest.class
cat << EOF > conftest.java

class conftest
{

}

EOF
("$JAVAC" -Xlint:$1 conftest.java 2>&AS_MESSAGE_LOG_FD) \
  && rm -f conftest.class], [emacs_cv_javac_knows_lint_$1=yes],
     [emacs_cv_javac_knows_lint_$1=no]))

  AS_IF([test "$emacs_cv_javac_knows_lint_$1" = "yes"],
    [WARN_JAVAFLAGS="$WARN_JAVAFLAGS -Xlint:$1"])
])

# Start Android configuration.  This is done in three steps:

# First, the SDK tools needed to build the Android package on the host
# are found.

# Then, configure is called inside itself with the NDK C and C++
# compilers, and the Makefiles generated, along with config.h, are
# renamed to end with .android.

# Finally, configure continues to configure the Emacs binary that will
# run on the host.

ANDROID=
JAVAC=
AAPT=
JARSIGNER=
APKSIGNER=
ZIPALIGN=
DX=
ANDROID_JAR=
ANDROID_ABI=
WARN_JAVAFLAGS=
ANDROID_SHARED_USER_ID=
ANDROID_SHARED_USER_NAME=
IS_D8_R8=

# This is a list of Makefiles that have alternative versions for
# Android.
android_makefiles="lib/Makefile lib/gnulib.mk lib-src/Makefile src/Makefile"

# This is whether or not to package mailutils into the executable.
emacs_use_mailutils=

AC_ARG_VAR([ANDROID_CC], [The Android C cross-compiler.])
AC_ARG_VAR([SDK_BUILD_TOOLS], [Name of directory holding Android SDK build-tools.])
AC_ARG_VAR([ANDROID_CFLAGS], [Flags given to the Android C cross-compiler.])
AC_ARG_VAR([JAVAC], [Java compiler path.  Used for Android.])
AC_ARG_VAR([JARSIGNER], [Java package signer path.  Used for Android.])
AC_ARG_VAR([APKSIGNER], [Android package signer path.  Used for Android.])
AC_ARG_VAR([SDK_BUILD_TOOLS], [Path to the Android SDK build tools.])
AC_ARG_VAR([ZIP], [Path to the `zip' utility.])

if test "$with_android" = "yes"; then
   AC_MSG_ERROR([Please specify the path to the Android.jar file, like so:

  ./configure --with-android=/path/to/android.jar

along with the path to the SDK build-tools (this is the directory with
tools such as aapt, dx, and aidl):

              SDK_BUILD_TOOLS=/path/to/sdk-build-tools

The cross-compiler should then be specified:

              ANDROID_CC=/path/to/armv7a-linux-androideabi19-clang

In addition, you may pass any special arguments to the cross-compiler
via the ANDROID_CFLAGS environment variable.])
elif test "$with_android" = "no" || test "$with_android" = ""; then
  ANDROID=no
else
  AC_CHECK_PROGS([JAVAC], [javac])
  if test "$JAVAC" = ""; then
    AC_MSG_ERROR([The Java compiler required to build Emacs was not found.
Please make sure `javac' can be found on your path, or alternatively specify
the path to your Java compiler before configuring Emacs, like so:

  JAVAC=/opt/jdk/bin/javac ./configure --with-android])
  fi

  AC_CHECK_PROGS([JARSIGNER], [jarsigner])
  if test "$JARSIGNER" = ""; then
    AC_MSG_ERROR([The Java package signing utility was not found.
Please make sure `jarsigner' can be found on your path, or alternatively
specify its location before configuring Emacs, like so:

  JARSIGNER=/opt/jdk/bin/jarsigner ./configure --with-android])
  fi

  AC_CACHE_CHECK([whether the Java compiler works],
    [emacs_cv_working_javac],
    AS_IF([rm -f conftest.class
cat << EOF > conftest.java

import android.app.Activity;
import android.os.Bundle;

class conftest extends Activity
{
  @Override
  public void
  onCreate (Bundle savedInstanceState)
  {
    super.onCreate (savedInstanceState);
  }
}

EOF
("$JAVAC" -classpath "$with_android" -target 1.7 -source 1.7 conftest.java \
  -d . >&AS_MESSAGE_LOG_FD 2>&1) && test -s conftest.class && rm -f conftest.class],
          [emacs_cv_working_javac=yes],
          [emacs_cv_working_javac=no]))

  if test "$emacs_cv_working_javac" = "no"; then
    AC_MSG_ERROR([The Java compiler does not work, or you did not specify
a valid path to android.jar.  See config.log for more details.])
  fi

  AC_CACHE_CHECK([whether android.jar is new enough],
    [emacs_cv_android_w_or_later],
    AS_IF([rm -f conftest.class
cat << EOF > conftest.java

import android.os.Build;

class conftest
{
  private static int test = Build.VERSION_CODES.BAKLAVA;
}

EOF
("$JAVAC" -classpath "$with_android" -target 1.7 -source 1.7 conftest.java \
  -d . >&AS_MESSAGE_LOG_FD 2>&1) && test -s conftest.class && rm -f conftest.class],
          [emacs_cv_android_w_or_later=yes],
          [emacs_cv_android_w_or_later=no]))

  if test "$emacs_cv_android_w_or_later" = "no"; then
    AC_MSG_ERROR([Emacs must be built with an android.jar file produced for \
Android 16 (BAKLAVA) or later.])
  fi

  dnl See if the Java compiler supports the `--release' option which
  dnl makes it check for and prevent using features introduced after
  dnl Java 1.7.

  AC_CACHE_CHECK([whether javac accepts --release 7],
    [emacs_cv_javac_release_7], AS_IF([rm -f conftest.class
cat << EOF > conftest.java

class conftest
{

}

EOF
("$JAVAC" --release 7 conftest.java 2>&AS_MESSAGE_LOG_FD) \
  && rm -f conftest.class],
      [emacs_cv_javac_release_7=yes],
      [emacs_cv_javac_release_7=no]))

  if test "$emacs_cv_javac_release_7" = "yes"; then
    WARN_JAVAFLAGS="$WARN_JAVAFLAGS --release 7"
  else
    dnl If not, just make sure the generated bytecode is correct.
    WARN_JAVAFLAGS="$WARN_JAVAFLAGS -target 1.7 -source 1.7"
  fi

  dnl Enable some useful Java linting options.
  JAVA_PUSH_LINT([deprecation])
  JAVA_PUSH_LINT([cast])
  JAVA_PUSH_LINT([divzero])
  JAVA_PUSH_LINT([nonempty])
  JAVA_PUSH_LINT([empty])
  JAVA_PUSH_LINT([finally])
  JAVA_PUSH_LINT([overrides])
  JAVA_PUSH_LINT([path])
  JAVA_PUSH_LINT([serial])
  JAVA_PUSH_LINT([unchecked])

  # Get the name of the android.jar file.
  ANDROID_JAR="$with_android"

  # Substitute this into java/Makefile.
  AC_SUBST([WARN_JAVAFLAGS])

  AC_PATH_PROGS([AAPT], [aapt], [], "${SDK_BUILD_TOOLS}:$PATH")
  if test "$AAPT" = ""; then
    AC_MSG_ERROR([The Android asset packaging tool was not found.
Please verify that the path to the SDK build tools you specified is correct])
  fi

  AC_PATH_PROGS([APKSIGNER], [apksigner], [], "${SDK_BUILD_TOOLS}:$PATH")
  if test "$APKSIGNER" = ""; then
    AC_MSG_ERROR([The Android package signing tool was not found.
Please verify that the path to the SDK build tools you specified is correct])
  fi

  AC_PATH_PROGS([D8], [d8], [], "${SDK_BUILD_TOOLS}:$PATH")
  if test "$D8" = ""; then
    AC_MSG_ERROR([The Android dexer was not found.
Please verify that the path to the SDK build tools you specified is correct])
  fi

  # Locate any d8.jar within the SDK build tools directory.  The R8
  # optimizing compiler is also present in this bundle, and it generates
  # far superior code.
  emacs_val=`which $D8`
  emacs_val=`AS_DIRNAME([$emacs_val])`/lib/d8.jar
  AS_IF([test -f "$emacs_val"],
    [AC_CACHE_CHECK([whether d8.jar coresident with d8 binary provides r8],
       [emacs_cv_d8_provides_r8],
       [AS_IF([java -cp "$emacs_val" com.android.tools.r8.R8 --help &>/dev/null],
         [emacs_cv_d8_provides_r8=yes], [emacs_cv_d8_provides_r8=no])])])
  AS_IF([test "$emacs_cv_d8_provides_r8" = "yes"],
    # And substitute it for D8 if present.
    [D8="java -cp $emacs_val com.android.tools.r8.R8"
     IS_D8_R8=yes])

  AC_PATH_PROGS([ZIPALIGN], [zipalign], [], "${SDK_BUILD_TOOLS}:$PATH")
  if test "ZIPALIGN" = ""; then
    AC_MSG_ERROR([The Android ZIP archive alignment utility was not found.
Please verify that the path to the SDK build tools you specified is correct]);
  fi

  dnl Now configure Emacs to generate binaries for Android.  After the
  dnl configuration completes, move the generated Makefiles.

  if test "$ANDROID_CC" = ""; then
    AC_MSG_ERROR([Please specify the path to the Android cross-compiler
for your machine.  For example:

  ANDROID_CC=/path/to/armv7a-linux-androideabi19-clang    \\
    ./configure --with-android])
  fi

  dnl Obtain the cross compiler's target to find out where binaries go
  dnl in the resulting package.

  AC_MSG_CHECKING([for the kind of Android system Emacs is being built for])
  cc_target=`${ANDROID_CC} -v 2>&1 | sed -n 's/Target: //p'`
  case "$cc_target" in
[
    *i[3-6]86*) android_abi=x86
      ;;
    *x86_64*) android_abi=x86_64
      ;;
    *aarch64*) android_abi=arm64-v8a
      ;;
    *arm*v7a*) android_abi=armeabi-v7a
      ;;
    *mips64*) android_abi=mips64
      ;;
    *mips*) android_abi=mips
      ;;
    *arm*) android_abi=armeabi
      ;;
]
    *) AC_MSG_ERROR([configure could not determine the type of Android \
binary Emacs is being configured for.  Please port this configure script \
to your Android system, or verify that you specified the correct compiler \
in the ANDROID_CC variable when you ran configure.

The compiler target is: $cc_target])
      ;;
  esac
  AC_MSG_RESULT([$android_abi])

  ANDROID_ABI=$android_abi

  dnl Obtain the minimum SDK version of the resulting Emacs binary
  dnl built with this NDK.

  ANDROID_MIN_SDK=8
  AC_MSG_CHECKING([for the lowest Android version Emacs can run on])
  [android_sdk=`echo "$cc_target" | grep -oE 'android([0-9][0-9]?)'`]

  if test -n "$android_sdk"; then
    android_sdk=`echo "$android_sdk" | sed -n 's/android//p'`
    AC_MSG_RESULT([$android_sdk])
    ANDROID_MIN_SDK=$android_sdk
  else
    # This is probably GCC.
    [ cat << EOF > conftest.c
#include <android/api-level.h>
extern const char *foo;

int
main (void)
{
#if __ANDROID_API__ < 7
   foo = "emacs_api_6";
#elif __ANDROID_API__ < 8
   foo = "emacs_api_7";
#elif __ANDROID_API__ < 9
   foo = "emacs_api_8";
#elif __ANDROID_API__ < 10
  foo = "emacs_api_9";
#elif __ANDROID_API__ < 11
  foo = "emacs_api_10";
#elif __ANDROID_API__ < 12
  foo = "emacs_api_11";
#elif __ANDROID_API__ < 13
  foo = "emacs_api_12";
#elif __ANDROID_API__ < 14
   foo = "emacs_api_13";
#elif __ANDROID_API__ < 15
   foo = "emacs_api_14";
#elif __ANDROID_API__ < 16
   foo = "emacs_api_15";
#elif __ANDROID_API__ < 17
   foo = "emacs_api_16";
#elif __ANDROID_API__ < 18
   foo = "emacs_api_17";
#elif __ANDROID_API__ < 19
   foo = "emacs_api_18";
#elif __ANDROID_API__ < 20
   foo = "emacs_api_19";
#elif __ANDROID_API__ < 21
   foo = "emacs_api_20";
#elif __ANDROID_API__ < 22
   foo = "emacs_api_21";
#elif __ANDROID_API__ < 23
   foo = "emacs_api_22";
#elif __ANDROID_API__ < 24
   foo = "emacs_api_23";
#elif __ANDROID_API__ < 25
   foo = "emacs_api_24";
#elif __ANDROID_API__ < 26
   foo = "emacs_api_25";
#elif __ANDROID_API__ < 27
   foo = "emacs_api_26";
#elif __ANDROID_API__ < 28
   foo = "emacs_api_27";
#elif __ANDROID_API__ < 29
   foo = "emacs_api_28";
#elif __ANDROID_API__ < 30
   foo = "emacs_api_29";
#elif __ANDROID_API__ < 31
   foo = "emacs_api_30";
#elif __ANDROID_API__ < 32
   foo = "emacs_api_31";
#elif __ANDROID_API__ < 33
   foo = "emacs_api_32";
#elif __ANDROID_API__ < 34
   foo = "emacs_api_33";
#elif __ANDROID_API__ < 35
   foo = "emacs_api_34";
#elif __ANDROID_API__ < 36
   foo = "emacs_api_35";
#elif __ANDROID_API__ < 37
   foo = "emacs_api_36";
#else
   foo = "emacs_api_future";
#endif
}
EOF]

    AC_CACHE_VAL([emacs_cv_android_api],
		 [$ANDROID_CC $ANDROID_CFLAGS -c conftest.c -o conftest.o \
		  && emacs_cv_android_api=`grep -ao -E	       		  \
		     "emacs_api_([[0-9][0-9]]?|future)" conftest.o`])
    android_sdk="$emacs_cv_android_api"
    rm -rf conftest.c conftest.o

    # If this version of the NDK requires __ANDROID_API__ to be
    # specified, then complain to the user.
    if test "$android_sdk" = "emacs_api_future"; then
       AC_MSG_ERROR([The version of Android to build for was not specified.
You must tell the Android compiler what version of Android to build for,
by defining the __ANDROID_API__ preprocessor macro in ANDROID_CC, like so:

    ANDROID_CC="/path/to/ndk/arm-linux-android-gcc -D__ANDROID_API__=8"])
    fi

    if test -n "$android_sdk"; then
       android_sdk=`echo $android_sdk | sed -n 's/emacs_api_//p'`
       AC_MSG_RESULT([$android_sdk])
       ANDROID_MIN_SDK=$android_sdk
    else
      AC_MSG_RESULT([unknown ($cc_target); assuming 8])
      AC_MSG_ERROR([configure could not determine the versions of Android \
a binary built with this compiler will run on.  The generated application \
package will likely install on older systems but crash on startup.])
      android_sdk=8
    fi
  fi
  AC_SUBST([ANDROID_MIN_SDK])

  # Now tell java/Makefile if Emacs is being built for Android 4.3 or
  # earlier.
  ANDROID_SDK_18_OR_EARLIER=
  if test "$android_sdk" -le "18"; then
     ANDROID_SDK_18_OR_EARLIER=yes
  fi
  AC_SUBST([ANDROID_SDK_18_OR_EARLIER])

  # Likewise for Android 2.2.
  ANDROID_SDK_8_OR_EARLIER=
  if test "$android_sdk" -le "8"; then
     ANDROID_SDK_8_OR_EARLIER=yes
     AC_CHECK_PROGS([ZIP], [zip])
     AS_IF([test -z "$ZIP"],
       [AC_MSG_ERROR([The `zip' utility is required for generating \
packages targeting Android 2.2.])])
  fi
  AC_SUBST([ANDROID_SDK_8_OR_EARLIER])
  AC_SUBST([ZIP])

  # Save confdefs.h and config.log for now.
  mv -f confdefs.h _confdefs.h
  mv -f config.log _config.log

  # Make sure these files are removed upon exit.
  trap "rm -rf _confdefs.h _config.log" 0

  # Figure out what --with-FOO options to pass through.
  passthrough="$passthrough --with-png=$with_png"
  passthrough="$passthrough --with-webp=$with_webp"
  passthrough="$passthrough --with-gif=$with_gif"
  passthrough="$passthrough --with-jpeg=$with_jpeg"
  passthrough="$passthrough --with-xml2=$with_xml2"
  passthrough="$passthrough --with-sqlite3=$with_sqlite3"
  passthrough="$passthrough --with-gnutls=$with_gnutls"
  passthrough="$passthrough --with-tiff=$with_tiff"
  passthrough="$passthrough --with-selinux=$with_selinux"
  passthrough="$passthrough --with-modules=$with_modules"
  passthrough="$passthrough --with-tree-sitter=$with_tree_sitter"
  passthrough="$passthrough --with-imagemagick=$with_imagemagick"
  passthrough="$passthrough --with-lcms2=$with_lcms2"
  passthrough="$passthrough --with-mailutils=$with_mailutils"
  passthrough="$passthrough --with-pop=$with_pop"
  passthrough="$passthrough --with-harfbuzz=$with_harfbuzz"
  passthrough="$passthrough --with-threads=$with_threads"
  passthrough="$passthrough --with-rsvg=$with_rsvg"

  # Now pass through some checking-related options.
  emacs_val="--enable-check-lisp-object-type=$enable_check_lisp_object_type"
  passthrough="$passthrough $emacs_val"

  # And derive a name for the recursive configure invocation's cache
  # file if one should be specified for this.
  AS_IF([test -n "$cache_file" && test "$cache_file" != "/dev/null"],
    [passthrough="$passthrough --cache-file=$cache_file.1"])

  AS_IF([test "x$with_mailutils" = "xyes"], [emacs_use_mailutils=yes])
  AC_SUBST([emacs_use_mailutils])

  AS_IF([XCONFIGURE=android ANDROID_CC="$ANDROID_CC"		\
         ANDROID_SDK="$android_sdk" android_abi=$android_abi	\
	 android_ndk_path="$with_ndk_path"		     	\
	 android_ndk_cxx="$android_ndk_cxx"			\
	 $CONFIG_SHELL $0 $passthrough], [],
    [AC_MSG_ERROR([Failed to cross-configure Emacs for android.])])

  # Now set ANDROID to yes.
  ANDROID=yes

  for makefile in $android_makefiles; do
    AC_MSG_NOTICE([Generating $makefile.android])
    mv -f "$makefile" "$makefile.android"
  done

  AC_MSG_NOTICE([Generating src/config.h.android])
  mv -f src/config.h src/config.h.android

  # Tell AndroidManifest.xml whether or not Emacs should be built
  # debug.
  ANDROID_DEBUGGABLE=false
  if test "$with_android_debug" = "yes"; then
    ANDROID_DEBUGGABLE=true
  fi
  AC_SUBST([ANDROID_DEBUGGABLE])

  # Move confdefs.h back now that the recursive call to configure is
  # complete.
  mv -f _confdefs.h confdefs.h

  # Move the Android config.log to config.log.android.  */
  mv -f config.log config.log.android

  # And _config.log back.
  mv -f _config.log config.log
fi

AC_SUBST([ANDROID])
AC_SUBST([JAVAC])
AC_SUBST([AAPT])
AC_SUBST([D8])
AC_SUBST([ZIPALIGN])
AC_SUBST([ANDROID_JAR])
AC_SUBST([ANDROID_ABI])
AC_SUBST([IS_D8_R8])

if test "$XCONFIGURE" = "android"; then
  ANDROID=yes

  # Enable cross compiling.
  cross_compiling=yes
fi

AC_SUBST([XCONFIGURE])

if test "$ANDROID" = "yes"; then
  # When --with-android is specified, almost all build options must be
  # disabled, both within the recursive invocation of configure and
  # outside.
  with_xpm=no

  # Some of these dependencies are now supported within Android, so
  # they can be enabled.
  if test "$XCONFIGURE" != "android"; then
    with_png=no
    with_webp=no
    with_gif=no
    with_jpeg=no
    with_xml2=no
    with_sqlite3=no
    with_gnutls=no
    with_tiff=no
    with_selinux=no
    with_modules=no
    with_tree_sitter=no
    with_imagemagick=no
    with_lcms2=no
    with_mailutils=no
    with_pop=no
    with_harfbuzz=no
    with_native_compilation=no
    with_threads=no
    with_rsvg=no
  fi

  with_libsystemd=no
  with_cairo=no
  with_xft=no
  with_libotf=no
  with_gpm=no
  with_dbus=no
  with_gsettings=no
  with_ns=no

  # zlib is available in android.
fi

dnl This used to use changequote, but, apart from 'changequote is evil'
dnl per the autoconf manual, we can speed up autoconf somewhat by quoting
dnl the great gob of text.  Thus it's not processed for possible expansion.
dnl Just make sure the brackets remain balanced.
dnl
dnl Since Emacs can't find matching pairs of quotes, boundaries are
dnl indicated by comments.
dnl quotation begins
[

### If you add support for a new configuration, add code to this
### switch statement to recognize your configuration name and select
### the appropriate opsys.

### As far as handling version numbers on operating systems is
### concerned, make sure things will fail in a fixable way.  If
### /etc/MACHINES doesn't say anything about version numbers, be
### prepared to handle anything reasonably.  If version numbers
### matter, be sure /etc/MACHINES says something about it.

opsys='' unported=no
case "${canonical}" in

  ## Android
  *linux-android* )
    opsys=android
  ;;

  ## GNU/Linux and similar ports
  *-*-linux* )
    opsys=gnu-linux
  ;;

  ## FreeBSD ports
  *-*-freebsd* )
    opsys=freebsd
  ;;

  ## DragonFly ports
  *-*-dragonfly* )
    opsys=dragonfly
  ;;

  ## FreeBSD kernel + glibc based userland
  *-*-kfreebsd*gnu* )
    opsys=gnu-kfreebsd
  ;;

  ## NetBSD ports
  *-*-netbsd* )
    opsys=netbsd
  ;;

  ## OpenBSD ports
  *-*-openbsd* | *-*-mirbsd* )
    opsys=openbsd
  ;;

  ## Apple Darwin / macOS
  *-apple-darwin* )
    case "${canonical}" in
      *-apple-darwin[0-9].*) unported=yes ;;
      i[3456]86-* | x86_64-* | arm-* | aarch64-* )  ;;
      * )            unported=yes ;;
    esac
    opsys=darwin
    ## FIXME: Find a way to use Fink if available (Bug#11507).
  ;;

  ## Chromium Native Client
  *-nacl )
    opsys=nacl
  ;;

  ## Cygwin ports
  *-*-cygwin )
    opsys=cygwin
  ;;

  ## HP 9000 series 700 and 800, running HP/UX
  hppa*-hp-hpux10.2* )
    opsys=hpux10-20
  ;;
  hppa*-hp-hpux1[1-9]* )
    opsys=hpux11
    CFLAGS="-D_INCLUDE__STDC_A1_SOURCE $CFLAGS"
  ;;

  ## IBM machines
  rs6000-ibm-aix4.[23]* )
    opsys=aix4-2
  ;;
  powerpc-ibm-aix4.[23]*  )
    opsys=aix4-2
  ;;
  rs6000-ibm-aix[56]* )
    opsys=aix4-2
  ;;
  powerpc-ibm-aix[5-9]* | powerpc-ibm-aix[1-9][0-9]* )
    opsys=aix4-2
  ;;

  ## Solaris
  *-*-solaris* | *-*-sunos*)
    case "${canonical}" in
      i[3456]86-*-* )   ;;
      amd64-*-*|x86_64-*-*) ;;
      sparc* )		;;
      * )		unported=yes ;;
    esac
    opsys=solaris
    ## Watch out for a compiler that we know will not work.
    if [ "$CC" = /usr/ucb/cc ]; then
      ## /usr/ucb/cc doesn't work;
      ## we should find some other compiler that does work.
      unset CC
    fi
  ;;

  ## QNX Neutrino
  *-nto-qnx* )
    opsys=qnxnto
    test -z "$CC" && CC=qcc
    LDFLAGS="-N2M $LDFLAGS"
  ;;

  *-haiku )
    opsys=haiku
  ;;

  ## Intel 386 machines where we don't care about the manufacturer.
  i[3456]86-*-* )
    case "${canonical}" in
      *-darwin* )               opsys=darwin ;;
      *-mingw* )
		opsys=mingw32
		# MinGW overrides and adds some system headers in nt/inc.
		# Also, GCC 14 turns on implicit-function-declaration
		# error by default, which fails configure tests where our
		# emulation of Posix headers defines only the minimal
		# stuff we actually need.
		GCC_TEST_OPTIONS="-I $srcdir/nt/inc -Wno-error=implicit-function-declaration"
		;;
      *-sysv4.2uw* )		opsys=unixware ;;
      *-sysv5uw* )		opsys=unixware ;;
      *-sysv5OpenUNIX* )	opsys=unixware ;;
      ## Otherwise, we'll fall through to the generic opsys code at the bottom.
    esac
  ;;

  # MinGW64
  x86_64-*-* )
    case "${canonical}" in
      *-mingw* )
		opsys=mingw32
		# MinGW overrides and adds some system headers in nt/inc.
		GCC_TEST_OPTIONS="-I $srcdir/nt/inc -Wno-error=implicit-function-declaration"
		;;
      ## Otherwise, we'll fall through to the generic opsys code at the bottom.
    esac
  ;;

  * )
    unported=yes
  ;;
esac

### If the code above didn't choose an operating system, just choose
### an operating system based on the configuration name.  You really
### only want to use this when you have no idea what the right
### operating system is; if you know what operating systems a machine
### runs, it's cleaner to make it explicit in the case statement
### above.
if test x"${opsys}" = x; then
  case "${canonical}" in
    *-gnu* )				opsys=gnu ;;
    * )
      unported=yes
    ;;
  esac
fi

]
dnl quotation ends

if test $unported = yes; then
  AC_MSG_ERROR([Emacs does not support '${canonical}' systems.
If you think it should, please send a report to ${PACKAGE_BUGREPORT}.
Check 'etc/MACHINES' for recognized configuration names.])
fi

#### Choose a compiler.

dnl Sets GCC=yes if using gcc.
AC_PROG_CC([gcc cc cl clang "$XCRUN gcc" "$XCRUN clang"])

if test -n "$XCRUN"; then
  AC_CHECK_PROGS([AR], [ar "$XCRUN ar"])
  test -n "$AR" && export AR
fi

if test x$GCC = xyes; then
  test "x$GCC_TEST_OPTIONS" != x && CC="$CC $GCC_TEST_OPTIONS"
fi

# Avoid gnulib's tests for -lcrypto, so that there's no static dependency on it.
AC_DEFUN([gl_CRYPTO_CHECK])
# Avoid gnulib's tests for HAVE_WORKING_O_NOATIME and HAVE_WORKING_O_NOFOLLOW,
# as we don't use them.
AC_DEFUN([gl_FCNTL_O_FLAGS])
# Avoid gnulib's test for pthread_sigmask.
funcs=
for func in $ac_func_list; do
  test $func = pthread_sigmask || AS_VAR_APPEND([funcs], [" $func"])
done
ac_func_list=$funcs
# Emacs does not use the wchar or wctype-h modules.
AC_DEFUN([gt_TYPE_WINT_T],
  [GNULIBHEADERS_OVERRIDE_WINT_T=0
   AC_SUBST([GNULIBHEADERS_OVERRIDE_WINT_T])])
# Emacs does not need to check for off64_t.
AC_DEFUN([gl_TYPE_OFF64_T],
  [HAVE_OFF64_T=1
   AC_SUBST([HAVE_OFF64_T])])

# Initialize gnulib right after choosing the compiler.
dnl Amongst other things, this sets AR and ARFLAGS.
gl_EARLY

# ndk_LATE must be enclosed in this conditional to prevent the
# AC_PROG_CXX it indirectly requires from being expanded at top level.
if test "$ndk_INITIALIZED" = "yes"; then
  ndk_LATE_EARLY
  ndk_LATE
fi

if test "$ac_test_CFLAGS" != set; then
  # It's helpful to have C macros available to GDB, so prefer -g3 to -g
  # if -g3 works and the user does not specify CFLAGS.
  # This test must follow gl_EARLY; otherwise AC_LINK_IFELSE complains.
  case $CFLAGS in
    '-g')
      emacs_g3_CFLAGS='-g3';;
    '-g -O2')
      emacs_g3_CFLAGS='-g3 -O2';;
    *)
      emacs_g3_CFLAGS='';;
  esac
  if test -n "$emacs_g3_CFLAGS"; then
    emacs_save_CFLAGS=$CFLAGS
    CFLAGS=$emacs_g3_CFLAGS
    AC_CACHE_CHECK([whether $CC accepts $emacs_g3_CFLAGS],
      [emacs_cv_prog_cc_g3],
      [AC_LINK_IFELSE([AC_LANG_PROGRAM()],
	 [emacs_cv_prog_cc_g3=yes],
	 [emacs_cv_prog_cc_g3=no])])
    if test $emacs_cv_prog_cc_g3 != yes; then
      CFLAGS=$emacs_save_CFLAGS
    fi
    # Haiku also needs -gdwarf-2 because its GDB is too old
    # to understand newer formats.
    if test $opsys = mingw32 || test $opsys = haiku; then
      CFLAGS="$CFLAGS -gdwarf-2"
    fi
  fi

  case $CFLAGS in
    *-O*) ;;
    *)
      # No optimization flag was inferred for this non-GCC compiler.
      # Try -O.  This is needed for xlc on AIX; see Bug#14258.
      emacs_save_CFLAGS=$CFLAGS
      test -z "$CFLAGS" || CFLAGS="$CFLAGS "
      CFLAGS=${CFLAGS}-O
      AC_CACHE_CHECK([whether $CC accepts -O],
        [emacs_cv_prog_cc_o],
	[AC_LINK_IFELSE([AC_LANG_PROGRAM()],
	   [emacs_cv_prog_cc_o=yes],
	   [emacs_cv_prog_cc_o=no])])
      if test $emacs_cv_prog_cc_o != yes; then
	CFLAGS=$emacs_save_CFLAGS
      fi ;;
  esac
fi

# gl_GCC_VERSION_IFELSE([major], [minor], [run-if-found], [run-if-not-found])
# ---------------------------------------------------------------------------
# If $CPP is gcc-MAJOR.MINOR or newer, then run RUN-IF-FOUND.
# Otherwise, run RUN-IF-NOT-FOUND.
AC_DEFUN([gl_GCC_VERSION_IFELSE],
  [AC_PREPROC_IFELSE(
    [AC_LANG_PROGRAM(
      [[
#if ($1) < __GNUC__ || (($1) == __GNUC__ && ($2) <= __GNUC_MINOR__)
/* ok */
#else
# error "your version of gcc is older than $1.$2"
#endif
      ]]),
    ], [$3], [$4])
  ]
)

# clang is unduly picky about some things.
AC_CACHE_CHECK([whether the compiler is clang], [emacs_cv_clang],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM([[
	  #ifndef __clang__
	    error "not clang";
	  #endif
        ]])],
     [emacs_cv_clang=yes],
     [emacs_cv_clang=no])])

AC_ARG_ENABLE([gcc-warnings],
  [AS_HELP_STRING([--enable-gcc-warnings@<:@=TYPE@:>@],
                  [control generation of GCC warnings.  The TYPE 'yes'
		   means to fail if any warnings are issued; 'warn-only'
		   means issue warnings without failing (default for
		   developer builds); 'no' means disable warnings
		   (default for non-developer builds).])],
  [case $enableval in
     yes|no|warn-only) ;;
     *)      AC_MSG_ERROR([bad value $enableval for gcc-warnings option]) ;;
   esac
   gl_gcc_warnings=$enableval],
  [# By default, use 'warn-only' if it looks like the invoker of 'configure'
   # is a developer as opposed to a builder.  This is most likely true
   # if GCC is recent enough and there is a .git directory or file;
   # however, if there is also a .tarball-version file it is probably
   # just a release imported into Git for patch management.
   gl_gcc_warnings=no
   AS_IF([test -d "$srcdir"/.git || test -f "$srcdir"/.git],
     [AS_IF([test -f "$srcdir"/.tarball-version], [],
	# Clang typically identifies itself as GCC 4.2 or something similar
	# even if it is recent enough to accept the warnings we enable.
	[AS_IF([test "$emacs_cv_clang" = yes],
	   [gl_gcc_warnings=warn-only],
	   [gl_GCC_VERSION_IFELSE([5], [3], [gl_gcc_warnings=warn-only])])])])])

NATIVE_COMPILATION_AOT=no
AC_ARG_WITH([native-compilation],
  [AS_HELP_STRING([--with-native-compilation@<:@=TYPE@:>@],
                  [compile with Emacs Lisp native compiler support.  The TYPE
		   'yes' (or empty) means to enable it and compile natively
		   preloaded Lisp files; 'no' means to disable it;
		   'aot' will make the build process compile all the Lisp
		   files in the tree natively ahead of time.  (This will
		   usually be quite slow.)])],
  [
  case $withval in
     aot)
       withval=yes
       NATIVE_COMPILATION_AOT=yes
       ;;
     yes|no) ;;
     *)      AC_MSG_ERROR([bad value $withval for native-compilation option]) ;;
   esac
   with_native_compilation=$withval],
  [with_native_compilation=default]
)
AC_SUBST([NATIVE_COMPILATION_AOT])

AC_ARG_ENABLE([check-lisp-object-type],
  [AS_HELP_STRING([--enable-check-lisp-object-type],
     [Enable compile time checks for the Lisp_Object data type,
      which can catch some bugs during development.])])
if test "$enable_check_lisp_object_type" = yes; then
  AC_DEFINE([CHECK_LISP_OBJECT_TYPE], [1],
    [Define to enable compile-time checks for the Lisp_Object data type.])
fi

WERROR_CFLAGS=
# When compiling with GCC, prefer -isystem to -I when including system
# include files, to avoid generating useless diagnostics for the files.
AS_IF([test $gl_gcc_warnings = no],
 [
  isystem='-I'
  AS_IF([test "$emacs_cv_clang" = yes],
   [
     # Turn off some warnings if supported.
     gl_WARN_ADD([-Wno-pointer-sign])
     gl_WARN_ADD([-Wno-string-plus-int])
     gl_WARN_ADD([-Wno-unknown-attributes])
     gl_WARN_ADD([-Wno-unknown-pragmas])
   ])
 ],[
  isystem='-isystem '

  # This, $nw, is the list of warnings we disable.
  nw=

  case $with_x_toolkit in
    lucid | athena | motif)
       # Old toolkits mishandle 'const'.
       nw="$nw -Wwrite-strings"
       ;;
  esac
  AS_IF([test $gl_gcc_warnings = yes],
    [WERROR_CFLAGS=-Werror],
    [# Use -fanalyzer and related options only if --enable-gcc-warnings,
     # as they slow GCC considerably.
     nw="$nw -fanalyzer -Wno-analyzer-double-free -Wno-analyzer-malloc-leak"
     nw="$nw -Wno-analyzer-null-dereference -Wno-analyzer-use-after-free"
     # Use -Wsuggest-attribute=malloc only if --enable-gcc-warnings,
     # as it doesn't flag code that is wrong in any way.
     nw="$nw -Wsuggest-attribute=malloc"])

  nw="$nw -Wcast-align=strict"      # Emacs is tricky with pointers.
  nw="$nw -Wduplicated-branches"    # Too many false alarms
  nw="$nw -Wformat-overflow=2"      # False alarms due to GCC bug 110333
  nw="$nw -Woverlength-strings"     # Not a problem these days
  nw="$nw -Wvla"                    # Emacs uses <vla.h>.
  nw="$nw -Winline"                 # OK to ignore 'inline'
  nw="$nw -Wstrict-overflow"        # OK to optimize assuming that
                                    # signed overflow has undefined behavior
  nw="$nw -Wsync-nand"              # irrelevant here, and provokes ObjC warning
  nw="$nw -Wunsafe-loop-optimizations" # OK to suppress unsafe optimizations
  nw="$nw -Wbad-function-cast"      # These casts are no worse than others.
  nw="$nw -Wzero-as-null-pointer-constant" # Emacs is not yet C2y-safe.

  # Emacs doesn't care about shadowing; see
  # <https://lists.gnu.org/r/emacs-diffs/2011-11/msg00265.html>.
  nw="$nw -Wshadow"

  # Emacs's use of alloca inhibits protecting the stack.
  nw="$nw -Wstack-protector"

  # Emacs's use of __attribute__ ((cold)) causes false alarms with this option.
  nw="$nw -Wsuggest-attribute=cold"

  # Emacs's use of partly-const functions such as Fgnutls_available_p
  # make this option problematic.
  nw="$nw -Wsuggest-attribute=const"

  # Emacs's use of partly-pure functions such as CHECK_TYPE make this
  # option problematic.
  nw="$nw -Wsuggest-attribute=pure"

  # Emacs doesn't need this paranoia.
  nw="$nw -Wbidi-chars=any,ucn"

  if test "$emacs_cv_clang" = yes; then
    nw="$nw -Wdouble-promotion"
    nm="$nm -Wunknown-pragmas"
  fi

  # This causes too much noise in the MinGW build.
  if test $opsys = mingw32; then
    nw="$nw -Wsuggest-attribute=format"
  fi

  # If Emacs is being built for Android and many functions are
  # currently stubbed out for operation on the build machine, disable
  # -Wsuggest-attribute=noreturn.

  AS_IF([test "$ANDROID" = "yes"],
    [nw="$nw -Wsuggest-attribute=noreturn"])

  gl_MANYWARN_ALL_GCC([ws])
  gl_MANYWARN_COMPLEMENT([ws], [$ws], [$nw])
  for w in $ws; do
    gl_WARN_ADD([$w])
  done
  gl_WARN_ADD([-Wredundant-decls])     # Prefer this, as we don't use Bison.
  gl_WARN_ADD([-Wtrailing-whitespace]) # This project's coding style
  gl_WARN_ADD([-Wno-missing-field-initializers]) # We need this one
  gl_WARN_ADD([-Wno-override-init])    # More trouble than it is worth
  gl_WARN_ADD([-Wno-sign-compare])     # Too many warnings for now
  gl_WARN_ADD([-Wno-type-limits])      # Too many warnings for now
  gl_WARN_ADD([-Wno-unused-parameter]) # Too many warnings for now
  gl_WARN_ADD([-Wno-format-nonliteral])
  gl_WARN_ADD([-Wno-bidi-chars])
  AS_IF([test $gl_gcc_warnings = yes],
    [gl_WARN_ADD([-Wno-analyzer-fd-leak]) # GCC bugs 109580, 109839
     gl_WARN_ADD([-Wno-analyzer-use-of-uninitialized-value]) # GCC bug 121030
    ])

  # clang is unduly picky about some things.
  if test "$emacs_cv_clang" = yes; then
    gl_WARN_ADD([-Wno-bitwise-instead-of-logical])
    gl_WARN_ADD([-Wno-format-signedness])
    gl_WARN_ADD([-Wno-missing-braces])
    gl_WARN_ADD([-Wno-null-pointer-arithmetic])
    gl_WARN_ADD([-Wno-implicit-const-int-float-conversion])
    gl_WARN_ADD([-Wno-int-in-bool-context])
    gl_WARN_ADD([-Wno-shift-overflow])
  fi

  # This causes too much noise in the MinGW build
  if test $opsys = mingw32; then
    gl_WARN_ADD([-Wno-pointer-sign])
  fi

  AC_DEFINE([GCC_LINT], [1], [Define to 1 if --enable-gcc-warnings.])
  AS_IF([test $gl_gcc_warnings = yes],
    [AC_DEFINE([GNULIB_PORTCHECK], [1], [enable some gnulib portability checks])
     AH_VERBATIM([GNULIB_PORTCHECK_FORTIFY_SOURCE],
     [/* Enable compile-time and run-time bounds-checking, and some warnings,
	 without upsetting glibc 2.15+. */
      #if (defined GNULIB_PORTCHECK && !defined _FORTIFY_SOURCE \
	   && defined __OPTIMIZE__ && __OPTIMIZE__)
      # define _FORTIFY_SOURCE 2
      #endif
     ])])
 ])

# clang is picky about these regardless of whether
# --enable-gcc-warnings is specified.
if test "$emacs_cv_clang" = yes; then
  gl_WARN_ADD([-Wno-initializer-overrides])
  gl_WARN_ADD([-Wno-tautological-compare])
  gl_WARN_ADD([-Wno-tautological-constant-out-of-range-compare])
fi

# Suppress deprecation warnings from using sprintf variants,
# starting with Xcode 14.1 on macOS 13.
# These warnings are false alarms, as Emacs usage of sprintf is safe.
if test $opsys = darwin; then
  gl_WARN_ADD([-Wno-deprecated-declarations])
fi

# Use a slightly smaller set of warning options for lib/.
nw=
nw="$nw -Wunused-macros"
gl_MANYWARN_COMPLEMENT([GNULIB_WARN_CFLAGS], [$WARN_CFLAGS], [$nw])

AC_SUBST([WERROR_CFLAGS])
AC_SUBST([GNULIB_WARN_CFLAGS])

edit_cflags="
  s,///*,/,g
  s/^/ /
  s/ -I/ $isystem/g
  s/^ //
"

AC_ARG_ENABLE([link-time-optimization],
[AS_HELP_STRING([--enable-link-time-optimization],
                [build with link-time optimization
		 (experimental; see INSTALL)])],
if test "${enableval}" != "no"; then
   ac_lto_supported=no
   if test "$emacs_cv_clang" = yes; then
      AC_MSG_CHECKING([whether link-time optimization is supported by clang])
      GOLD_PLUGIN=`$CC -print-file-name=LLVMgold.so 2>/dev/null`
      if test -x "$GOLD_PLUGIN"; then
	 LTO="-flto"
      fi
   elif test x$GCC = xyes; then
      AC_MSG_CHECKING([whether link-time optimization is supported by gcc])
      CPUS=`getconf _NPROCESSORS_ONLN 2>/dev/null`
      if test x$CPUS != x; then
	 LTO="-flto=$CPUS"
      else
	 LTO="-flto"
      fi
   else
      AC_MSG_ERROR([Link-time optimization is not supported with your compiler.])
   fi
   if test -z "$LTO"; then
      ac_lto_supported=no
   else
      old_CFLAGS=$CFLAGS
      CFLAGS="$CFLAGS $LTO"
      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[]])],
         [ac_lto_supported=yes], [ac_lto_supported=no])
         CFLAGS="$old_CFLAGS"
   fi
   AC_MSG_RESULT([$ac_lto_supported])
   if test "$ac_lto_supported" = "yes"; then
      CFLAGS="$CFLAGS $LTO"
      if test "$emacs_cv_clang" = yes; then
	 AC_MSG_WARN([Please read INSTALL before using link-time optimization with clang])
	 # WARNING: 'ar --plugin ...' doesn't work without
	 # command, so plugin name is appended to ARFLAGS.
	 ARFLAGS="cru --plugin $GOLD_PLUGIN"
	 RANLIB="$RANLIB --plugin $GOLD_PLUGIN"
      else
        dnl The following is needed for GCC 4.9.0.  The GCC 4.9.0 release notes
        dnl suggest that instead of -ffat-lto-objects we should use gcc-ar and
        dnl gcc-ranlib in place of ar and ranlib, but gcc-ar makes /usr/bin/ar
        dnl dump core on Fedora 20, so play it safe for now.
        gl_COMPILER_OPTION_IF([-ffat-lto-objects],
          [CFLAGS="$CFLAGS -ffat-lto-objects"])
      fi
   fi
fi)


dnl Automake replacements.
AC_DEFUN([AM_CONDITIONAL],
  [$2 && $1_CONDITION=1 || $1_CONDITION=
   AC_SUBST([$1_CONDITION])])
AC_DEFUN([AM_COND_IF],
  [AS_IF([test "$$1_CONDITION"], [$2], [$3])])

dnl Prefer silent make output.  For verbose output, use
dnl 'configure --disable-silent-rules' or 'make V=1' .
AC_ARG_ENABLE([silent-rules],
  [AS_HELP_STRING(
     [--disable-silent-rules],
     [verbose build output (undo: "make V=0")])])
if test "$enable_silent_rules" = no; then
  AM_DEFAULT_VERBOSITY=1
else
  AM_DEFAULT_VERBOSITY=0
fi
AC_SUBST([AM_DEFAULT_VERBOSITY])
ARCH_INDEPENDENT_CONFIG_FILES([src/verbose.mk])

dnl Some other nice autoconf tests.
AC_PROG_INSTALL
dnl use "gawk" where possible
AC_PROG_AWK
dnl These are commented out, since gl_EARLY and/or Autoconf already does them.
dnl AC_PROG_MKDIR_P
dnl if test "x$RANLIB" = x; then
dnl   AC_PROG_RANLIB
dnl fi


dnl Sadly, AC_PROG_LN_S is too restrictive.  It also tests whether links
dnl can be made to directories.  This is not relevant for our usage, and
dnl excludes some cases that work fine for us.  Eg MS Windows or files
dnl hosted on AFS, both examples where simple links work, but links to
dnl directories fail.  We use a cut-down version instead.
dnl AC_PROG_LN_S

AC_CACHE_CHECK([command to symlink files in the same directory], [emacs_cv_ln_s_fileonly],
[rm -f conf$$ conf$$.file

emacs_cv_ln_s_fileonly='cp -p'

dnl On MinGW, ensure we will call the MSYS /bin/ln.exe, not some
dnl random program in the current directory.
if (echo >conf$$.file) 2>/dev/null; then
  if test "$opsys" = "mingw32"; then
    emacs_cv_ln_s_fileonly=/bin/ln
  elif ln -s conf$$.file conf$$ 2>/dev/null; then
    emacs_cv_ln_s_fileonly='ln -s'
  elif ln conf$$.file conf$$ 2>/dev/null; then
    emacs_cv_ln_s_fileonly=ln
  fi
fi

rm -f conf$$ conf$$.file])
LN_S_FILEONLY=$emacs_cv_ln_s_fileonly

AC_SUBST([LN_S_FILEONLY])


dnl AC_PROG_LN_S sets LN_S to 'cp -pR' for MinGW, on the premise that 'ln'
dnl doesn't support links to directories, as in "ln file dir".  But that
dnl use is non-portable, and OTOH MinGW wants to use hard links for Emacs
dnl executables at "make install" time.
dnl See https://lists.gnu.org/r/emacs-devel/2013-04/msg00475.html
dnl for more details.
if test "$opsys" = "mingw32"; then
  LN_S="/bin/ln"
fi

dnl On some Debian versions, "install-info" prints irritating messages
dnl "This is not dpkg install-info anymore, but GNU install-info"
dnl if called via an absolute file name.
dnl Use the entirely-identical-but-quieter ginstall-info instead if present.
dnl Sadly some people may have an old ginstall-info installed on
dnl non-Debian systems, so we can't use this.
dnl AC_PATH_PROGS([INSTALL_INFO], [ginstall-info install-info], [:],
dnl   [$PATH$PATH_SEPARATOR/usr/sbin$PATH_SEPARATOR/sbin])

AC_PATH_PROG([INSTALL_INFO], [install-info], [:],
  [$PATH$PATH_SEPARATOR/usr/sbin$PATH_SEPARATOR/sbin])
dnl Don't use GZIP, which is used by gzip for additional parameters.
AC_PATH_PROG([GZIP_PROG], [gzip])

test $with_compress_install != yes && test -n "$GZIP_PROG" && \
   GZIP_PROG=" # $GZIP_PROG # (disabled by configure --without-compress-install)"

AC_CACHE_CHECK([for 'find' args to delete a file],
  [emacs_cv_find_delete],
  [if touch conftest.tmp && find conftest.tmp -delete 2>/dev/null &&
      test ! -f conftest.tmp
   then emacs_cv_find_delete="-delete" # GNU 'find'
   elif find . -prune -name x -exec echo {} + 2>/dev/null
   then emacs_cv_find_delete="-exec rm -f {} +" # POSIX 'find'
   else emacs_cv_find_delete="-exec rm -f {} + -o -exec true {} +" # AIX 7.3
   fi])
FIND_DELETE=$emacs_cv_find_delete
AC_SUBST([FIND_DELETE])

PAXCTL_dumped=
PAXCTL_notdumped=
AC_SUBST([PAXCTL_dumped])
AC_SUBST([PAXCTL_notdumped])
AC_SUBST([SETFATTR])

# Makeinfo on macOS is ancient, check whether there is a more recent
# version installed by Homebrew.
AC_CHECK_PROGS([BREW], [brew])
if test -n "$BREW"; then
  AC_PATH_PROG([MAKEINFO], [makeinfo], [],
    [`$BREW --prefix texinfo 2>/dev/null`/bin$PATH_SEPARATOR$PATH])
fi

# Check MacPorts on macOS.
if test $opsys = darwin; then
  AC_PATH_PROG([HAVE_MACPORTS], [port])
fi

## Require makeinfo >= 4.13 (last of the 4.x series) to build the manuals.
: ${MAKEINFO:=makeinfo}
case `($MAKEINFO --version) 2>/dev/null` in
  *' (GNU texinfo) '4.1[[3-9]]* | \
  *' (GNU texinfo) '[[5-9]]* | \
  *' (GNU texinfo) '[[1-9][0-9]]* ) ;;
  *) MAKEINFO=no;;
esac

## Makeinfo is unusual.  For a released Emacs, the manuals are
## pre-built, and not deleted by the normal clean rules.  makeinfo is
## therefore in the category of "special tools" not normally required, which
## configure does not have to check for (eg autoconf itself).
## In a repository checkout on the other hand, the manuals are not included.
## So makeinfo is a requirement to build from the repository, and configure
## should test for it as it does for any other build requirement.
## We use the presence of $srcdir/info/emacs to distinguish a release,
## with pre-built manuals, from a repository checkout.
if test "$MAKEINFO" = "no"; then
  MAKEINFO=makeinfo
  if test ! -e "$srcdir/info/emacs" && test ! -e "$srcdir/info/emacs.info"; then
    AC_MSG_ERROR( [You do not seem to have makeinfo >= 4.13, and your
source tree does not seem to have pre-built manuals in the 'info' directory.
Please install a suitable version of makeinfo.] )
  else
    AC_MSG_WARN( [You do not seem to have makeinfo >= 4.13.
You will not be able to rebuild the manuals if you delete them or change
their sources.] )
  fi
fi
AC_SUBST([MAKEINFO])

if test $opsys = mingw32; then
   DOCMISC_W32=efaq-w32
else
   DOCMISC_W32=
fi
AC_SUBST([DOCMISC_W32])

dnl Add our options to ac_link now, after it is set up.

if test x$GCC = xyes; then
  test "x$GCC_LINK_TEST_OPTIONS" != x && \
    ac_link="$ac_link $GCC_LINK_TEST_OPTIONS"
else
  test "x$NON_GCC_LINK_TEST_OPTIONS" != x && \
    ac_link="$ac_link $NON_GCC_LINK_TEST_OPTIONS"
fi

AC_CACHE_CHECK([whether addresses are sanitized],
  [emacs_cv_sanitize_address],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM(
	[[#ifndef __has_feature
	  #define __has_feature(f) 0
	  #endif
	  #if defined __SANITIZE_ADDRESS__ || __has_feature (address_sanitizer)
	  #else
	   error "Addresses are not sanitized.";
	  #endif
	]])],
     [emacs_cv_sanitize_address=yes],
     [emacs_cv_sanitize_address=no])])

LD_SWITCH_SYSTEM=
case "$opsys" in
  freebsd|dragonfly)
   ## Let 'ld' find image libs and similar things in /usr/local/lib.
   ## The system compiler, GCC, has apparently been modified to not
   ## look there, contrary to what a stock GCC would do.
### It's not our place to do this.  See bug#10313#17.
###   LD_SWITCH_SYSTEM=-L/usr/local/lib
      :
   ;;

  gnu-linux)
   ## cpp test was "ifdef __mips__", but presumably this is equivalent...
   case $host_cpu in mips*) LD_SWITCH_SYSTEM="-G 0";; esac
   ;;

  netbsd)
### It's not our place to do this.  See bug#10313#17.
###   LD_SWITCH_SYSTEM="-Wl,-rpath,/usr/pkg/lib -L/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/local/lib"
      :
   ;;

  openbsd)
      :
   ;;
esac
AC_SUBST([LD_SWITCH_SYSTEM])

ac_link="$ac_link $LD_SWITCH_SYSTEM"

## This setting of LD_SWITCH_SYSTEM references LD_SWITCH_X_SITE_RPATH,
## which has not been defined yet.  When this was handled with cpp,
## it was expanded to null when configure sourced the s/*.h file.
## Thus LD_SWITCH_SYSTEM had different values in configure and the Makefiles.
## FIXME it would be cleaner to put this in LD_SWITCH_SYSTEM_TEMACS
## (or somesuch), but because it is supposed to go at the _front_
## of LD_SWITCH_SYSTEM, we cannot do that in exactly the same way.
## Compare with the gnu-linux case below, which added to the end
## of LD_SWITCH_SYSTEM, and so can instead go at the front of
## LD_SWITCH_SYSTEM_TEMACS.
case "$opsys" in
  netbsd|openbsd)
   LD_SWITCH_SYSTEM="\$(LD_SWITCH_X_SITE_RPATH) $LD_SWITCH_SYSTEM" ;;
esac

C_SWITCH_MACHINE=

AC_CACHE_CHECK([for flag to work around GCC union bugs],
  [emacs_cv_gcc_union_bugs_CFLAGS],
  [emacs_cv_gcc_union_bugs_CFLAGS='none needed'
   AS_IF([test "$GCC" = yes],
     [old_CFLAGS=$CFLAGS
      # Use -fno-tree-sra if GCC 4 through 15.1.
      for emacs_cv_gcc_union_bugs_CFLAGS in \
	  'none needed' -fno-tree-sra
      do
	AS_CASE([$emacs_cv_gcc_union_bugs_CFLAGS],
	  ['none needed'], [],
	  [-fno-tree-sra], [break],
	  [CFLAGS="$old_CFLAGS $emacs_cv_gcc_union_bugs_CFLAGS"])
	AC_COMPILE_IFELSE(
	  [AC_LANG_DEFINES_PROVIDED
	   [/* Work around GCC bugs 117423 and 119085 re holes in unions:
	       https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117423
	       https://gcc.gnu.org/bugzilla/show_bug.cgi?id=119085
	       These are fixed in GCC 13.5, 14.4 and 15.2.

	       Working around them also works around GCC bug 58416
	       with double in unions on x86, where the generated insns
	       copy non-floating-point data via fldl/fstpl instruction pairs.
	       This can misbehave if the data's bit pattern looks like a NaN.
	       See, e.g.:
		 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58416#c10
		 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71460
		 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93271
		 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=114659
	       GCC bug 58416 is fixed in GCC 15.1.  */
	    #if 4 <= __GNUC__ && ! (15 < __GNUC__ + (1 < __GNUC_MINOR__))
	     #ifndef __clang__
	      #error "GCC union bugs possibly present"
	     #endif
	    #endif
	  ]],
	  [break])
      done
      CFLAGS=$old_CFLAGS])])
AS_CASE([$emacs_cv_gcc_union_bugs_CFLAGS],
  [-*],
    [C_SWITCH_MACHINE="$C_SWITCH_MACHINE $emacs_cv_gcc_union_bugs_CFLAGS"])

AC_SUBST([C_SWITCH_MACHINE])

C_SWITCH_SYSTEM=
## Some programs in src produce warnings saying certain subprograms
## are too complex and need a MAXMEM value greater than 2000 for
## additional optimization.  --nils@exp-math.uni-essen.de
test "$opsys" = "aix4.2" && test "x$GCC" != "xyes" && \
  C_SWITCH_SYSTEM="-ma -qmaxmem=4000"
if test "$opsys" = "mingw32"; then
  case "$canonical" in
    x86_64-*-mingw*) C_SWITCH_SYSTEM="-mtune=generic" ;;
    *) C_SWITCH_SYSTEM="-mtune=pentium4" ;;
  esac
fi
## gnu-linux might need -D_BSD_SOURCE on old libc5 systems.
## It is redundant in glibc2, since we define _GNU_SOURCE.
AC_SUBST([C_SWITCH_SYSTEM])


LIBS_SYSTEM=
case "$opsys" in
  ## IBM's X11R5 uses -lIM and -liconv in AIX 3.2.2.
  aix4-2) LIBS_SYSTEM="-lrts -lIM -liconv" ;;

  freebsd|dragonfly) LIBS_SYSTEM="-lutil" ;;

  hpux*) LIBS_SYSTEM="-l:libdld.sl" ;;

  qnxnto) LIBS_SYSTEM="-lsocket" ;;

  solaris) LIBS_SYSTEM="-lsocket -lnsl" ;;

  ## Motif needs -lgen.
  unixware) LIBS_SYSTEM="-lsocket -lnsl -lelf -lgen" ;;

  # Haiku needs -lbsd for cfsetspeed.
  haiku) LIBS_SYSTEM="-lnetwork -lbsd" ;;
esac

AC_SUBST([LIBS_SYSTEM])

### Make sure subsequent tests use flags consistent with the build flags.

if test x"${OVERRIDE_CPPFLAGS}" != x; then
  CPPFLAGS="${OVERRIDE_CPPFLAGS}"
else
  CPPFLAGS="$C_SWITCH_SYSTEM $C_SWITCH_MACHINE $CPPFLAGS"
fi

# Suppress obsolescent Autoconf test for size_t; Emacs assumes C99 or better.
AC_DEFUN([AC_TYPE_SIZE_T])
# Likewise for obsolescent test for uid_t, gid_t; Emacs assumes them.
AC_DEFUN([AC_TYPE_UID_T])
ac_cv_type_gid_t=yes # AC_TYPE_GETGROUPS needs this in Autoconf 2.72.

# Check for all math.h functions that Emacs uses; on some platforms,
# -lm is needed for some of these functions.
AC_CACHE_CHECK([for math library],
  [emacs_cv_lib_math],
  [OLD_LIBS=$LIBS
   AC_LINK_IFELSE(
     [AC_LANG_SOURCE([[
	#include <math.h>
	int
	main (int argc, char **argv)
	{
	  double d = argc;
	  float f = argc;
	  int i = argc;
	  long l = argc;
	  d = acos (d);
	  d = asin (d);
	  d = atan (d);
	  d = atan2 (d, d);
	  d = ceil (d);
	  d = copysign (d, d);
	  d = cos (d);
	  d = exp (d);
	  d = fabs (d);
	  d = floor (d);
	  d = fmod (d, d);
	  d = frexp (d, &i);
	  d = ldexp (d, i);
	  d = log (d);
	  d = log10 (d);
	  d = pow (d, d);
	  d = rint (d);
	  d = scalbn (d, l);
	  d = sin (d);
	  d = sqrt (d);
	  d = tan (d);
	  d = trunc (d);
	  f = fabsf (f);
	  f = powf (f, f);
	  i = ilogb (d);
	  i = signbit (d);
	  l = lrint (d);
	  l = lround (d);
	  return d == f && i == l;
	}
     ]])],
     [emacs_cv_lib_math='none required'],
     [LIBS="-lm $LIBS"
      AC_LINK_IFELSE([],
        [emacs_cv_lib_math=-lm],
	[AC_MSG_ERROR([Math library (-lm) not found])])])
   LIBS=$OLD_LIBS])
case $emacs_cv_lib_math in
  -*) LIB_MATH=$emacs_cv_lib_math;;
  *)  LIB_MATH=;;
esac

dnl Current possibilities handled by sed (aix4-2 -> aix,
dnl gnu-linux -> gnu/linux, etc.):
dnl gnu, gnu/linux, gnu/kfreebsd, aix, cygwin, darwin, hpux.
dnl And special cases: berkeley-unix, usg-unix-v, ms-dos, windows-nt.
SYSTEM_TYPE=`echo $opsys | sed -e 's/[[0-9]].*//' -e 's|-|/|'`

case $opsys in
  cygwin )
    LIB_MATH=
    ;;
  darwin )
    ## Adding -lm confuses the dynamic linker, so omit it.
    LIB_MATH=
    ;;
  freebsd | dragonfly )
    SYSTEM_TYPE=berkeley-unix
    ;;
  gnu-linux | gnu-kfreebsd )
    ;;
  hpux10-20 | hpux11 )
    ;;
  mingw32 )
    LIB_MATH=
    SYSTEM_TYPE=windows-nt
    ;;
  netbsd | openbsd )
    SYSTEM_TYPE=berkeley-unix
    ;;

  solaris | unixware )
    SYSTEM_TYPE=usg-unix-v
    ;;

esac

AC_SUBST([LIB_MATH])
AC_DEFINE_UNQUOTED([SYSTEM_TYPE], ["$SYSTEM_TYPE"],
  [The type of system you are compiling for; sets 'system-type'.])
AC_SUBST([SYSTEM_TYPE])

pre_PKG_CONFIG_CFLAGS=$CFLAGS
pre_PKG_CONFIG_LIBS=$LIBS

dnl pkg-config does not work when cross-compiling for Android.
if test "${ANDROID}" != "yes"; then
  PKG_PROG_PKG_CONFIG([0.9.0])
fi

dnl EMACS_CHECK_MODULES([GSTUFF], [gtk+-2.0 >= 1.3 glib = 1.3.4])
dnl acts like PKG_CHECK_MODULES([GSTUFF], [gtk+-2.0 >= 1.3 glib = 1.3.4],
dnl [HAVE_GSTUFF=yes], [HAVE_GSTUFF=no]) -- see pkg-config man page --
dnl except that it postprocesses CFLAGS as needed for --enable-gcc-warnings.
dnl EMACS_CHECK_MODULES accepts optional 3rd and 4th arguments that
dnl can take the place of the default HAVE_GSTUFF=yes and HAVE_GSTUFF=no
dnl actions.
AC_DEFUN([EMACS_CHECK_MODULES],
  [AS_IF([test -n "$ndk_INITIALIZED"],
    [ndk_CHECK_MODULES([$1], [$2], m4_default([$3], [HAVE_$1=yes]),
      m4_default([$4],[HAVE_$1=no]))],
    [PKG_CHECK_MODULES([$1], [$2],
       [$1_CFLAGS=`AS_ECHO(["$$1_CFLAGS"]) | sed -e "$edit_cflags"`
        m4_default([$3], [HAVE_$1=yes])],
       [m4_default([$4], [HAVE_$1=no])])])])

dnl EMACS_CHECK_LIB(NAME, FUNCTION, ACTION-IF-FOUND, ACTION-IF-NOT-FOUND,
dnl OTHER-LIBRARIES, INCLUDES)
dnl ---------------------------------------------------------------------
dnl This is like AC_CHECK_LIB; however, there is no default action, and
dnl when cross-configuring for Android, AC_CHECK_DECLS is called with NAME
dnl and INCLUDES instead, as the library being checked against will likely
dnl be built together with Emacs.
AC_DEFUN([EMACS_CHECK_LIB],
  [AS_IF([test -n "$ndk_INITIALIZED"],
    [AC_CHECK_DECL([$2], [$3], [$4], [$6])],
    [AC_CHECK_LIB([$1], [$2], [$3], [$4], [$5])])])

HAVE_SOUND=no
if test "${with_sound}" != "no"; then
  # Sound support for GNU/Linux, the free BSDs, MinGW, and Cygwin.
  AC_CHECK_HEADERS([machine/soundcard.h sys/soundcard.h soundcard.h mmsystem.h],
    [have_sound_header=yes], [], [
    #ifdef __MINGW32__
    #define WIN32_LEAN_AND_MEAN
    #include <windows.h>
    #endif
    ])
  test "${with_sound}" = "oss" && test "${have_sound_header}" != "yes" && \
    AC_MSG_ERROR([OSS sound support requested but not found.])

  if test "${with_sound}" = "bsd-ossaudio" || test "${with_sound}" = "yes"; then
    # OSS emulation library used on NetBSD and OpenBSD.
    AC_CHECK_LIB([ossaudio], [_oss_ioctl], [LIBSOUND=-lossaudio], [LIBSOUND=])
    test "${with_sound}" = "bsd-ossaudio" && test -z "$LIBSOUND" && \
      AC_MSG_ERROR([bsd-ossaudio sound support requested but not found.])
    # On {Net,Open}BSD use the system audio library instead of
    # potentially switching to ALSA below, as ALSA on these appears to
    # just wrap system libraries.
    test "${with_sound}" = "yes" && test "$LIBSOUND" = "-lossaudio" && \
      with_sound="bsd-ossaudio"
  fi
  AC_SUBST([LIBSOUND])

  if test "${with_sound}" = "alsa" || test "${with_sound}" = "yes"; then
    ALSA_REQUIRED=1.0.0
    ALSA_MODULES="alsa >= $ALSA_REQUIRED"
    EMACS_CHECK_MODULES([ALSA], [$ALSA_MODULES])
    if test $HAVE_ALSA = yes; then
      LIBSOUND="$LIBSOUND $ALSA_LIBS"
      CFLAGS_SOUND="$CFLAGS_SOUND $ALSA_CFLAGS"
      AC_DEFINE([HAVE_ALSA], [1], [Define to 1 if ALSA is available.])
    elif test "${with_sound}" = "alsa"; then
      AC_MSG_ERROR([ALSA sound support requested but not found.])
    fi
  fi                            dnl with_sound = alsa|yes

  dnl Define HAVE_SOUND if we have sound support.  We know it works and
  dnl compiles only on the specified platforms.  For others, it
  dnl probably doesn't make sense to try.
  dnl FIXME So surely we should bypass this whole section if not using
  dnl one of these platforms?
  if test x$have_sound_header = xyes || test $HAVE_ALSA = yes; then
     case "$opsys" in
       dnl defined __FreeBSD__ || defined __NetBSD__ || defined __linux__
       dnl Adjust the --with-sound help text if you change this.
       gnu-linux|freebsd|netbsd|mingw32|cygwin)
	 AC_DEFINE([HAVE_SOUND], [1], [Define to 1 if you have sound support.])
         HAVE_SOUND=yes
         ;;
     esac
  fi

  AC_SUBST([CFLAGS_SOUND])
fi

dnl checks for header files
AC_CHECK_HEADERS_ONCE(
 [linux/fs.h
  malloc.h
  sys/systeminfo.h
  sys/sysinfo.h
  coff.h pty.h
  sys/resource.h
  sys/utsname.h pwd.h util.h
  sanitizer/lsan_interface.h
  sanitizer/asan_interface.h
  sanitizer/common_interface_defs.h])

AC_CACHE_CHECK([for ADDR_NO_RANDOMIZE],
  [emacs_cv_personality_addr_no_randomize],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM([[#include <sys/personality.h>]],
		      [[personality (personality (0xffffffff)
				     | ADDR_NO_RANDOMIZE)]])],
     [emacs_cv_personality_addr_no_randomize=yes],
     [emacs_cv_personality_addr_no_randomize=no])])
if test $emacs_cv_personality_addr_no_randomize = yes; then
  AC_DEFINE([HAVE_PERSONALITY_ADDR_NO_RANDOMIZE], [1],
            [Define to 1 if personality flag ADDR_NO_RANDOMIZE exists.])
fi

# Note that Solaris has sys/sysinfo.h which defines struct
# sysinfo as well.  To make sure that we're using GNU/Linux
# sysinfo, we explicitly set one of its fields.
if test "$ac_cv_header_sys_sysinfo_h" = yes; then
  AC_CACHE_CHECK([if Linux sysinfo may be used], [emacs_cv_linux_sysinfo],
  [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/sysinfo.h>]],
                                     [[struct sysinfo si;
                                       si.totalram = 0;
                                       sysinfo (&si)]])],
    emacs_cv_linux_sysinfo=yes, emacs_cv_linux_sysinfo=no)])

  if test $emacs_cv_linux_sysinfo = yes; then
    AC_DEFINE([HAVE_LINUX_SYSINFO], [1],
      [Define to 1 if you have Linux sysinfo function.])
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/sysinfo.h>]],
                                       [[struct sysinfo si; return si.mem_unit]])],
      AC_DEFINE([LINUX_SYSINFO_UNIT], [1],
                [Define to 1 if Linux sysinfo sizes are in multiples of mem_unit bytes.]))
  fi
fi

dnl On Solaris 8 there's a compilation warning for term.h because
dnl it doesn't define 'bool'.
AC_PREPROC_IFELSE([AC_LANG_PROGRAM([[#include <term.h>]],[[]])],
  [AC_DEFINE([HAVE_TERM_H], [1],
     [Define to 1 if you have the <term.h> header file.])])
AC_HEADER_SYS_WAIT

AC_CHECK_HEADERS_ONCE([sys/socket.h])
AC_CHECK_HEADERS([net/if.h], [], [], [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif])
AC_CHECK_HEADERS([ifaddrs.h], [], [], [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif])
AC_CHECK_HEADERS([net/if_dl.h], [], [], [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif])

dnl checks for structure members
AC_CHECK_MEMBERS([struct ifreq.ifr_flags, struct ifreq.ifr_hwaddr,
		  struct ifreq.ifr_netmask, struct ifreq.ifr_broadaddr,
		  struct ifreq.ifr_addr,
		  struct ifreq.ifr_addr.sa_len], [], [],
		 [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#if HAVE_NET_IF_H
#include <net/if.h>
#endif])

dnl Check for endianness.
dnl AC_C_BIGENDIAN is done by gnulib.

dnl check for Make feature

AUTO_DEPEND=no
AUTODEPEND_PARENTS='lib src'
dnl check if we have GCC and autodepend is on.
if test "$GCC" = yes && test "$ac_enable_autodepend" = yes; then
   AC_CACHE_CHECK([whether gcc understands -MMD -MF], [emacs_cv_autodepend],
   [SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -MMD -MF deps.d -MP"
   AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[]])],
     [emacs_cv_autodepend=yes], [emacs_cv_autodepend=no])
   CFLAGS="$SAVE_CFLAGS"
   test -f deps.d || emacs_cv_autodepend=no
   rm -rf deps.d])
   if test $emacs_cv_autodepend = yes; then
      AUTO_DEPEND=yes
   fi
fi
AC_SUBST([AUTO_DEPEND])

#### Choose a window system.

## We leave window_system equal to none if
## we end up building without one.  Any new window system should
## set window_system to an appropriate value and add objects to
## window-system-specific substs.

window_system=none

ANDROID_OBJ=
ANDROID_LIBS=
# ANDROID_CFLAGS is a precious variable used to pass information to
# the cross-compiler.
ANDROID_BUILD_CFLAGS=
REALLY_ANDROID=
CM_OBJ="cm.o"

AS_IF([test "$ANDROID" = "yes"],[
  window_system=android
  no_x=yes
  ANDROID_OBJ="androidterm.o androidfns.o androidfont.o androidmenu.o"
  ANDROID_OBJ="$ANDROID_OBJ android.o"
  ANDROID_LIBS=
  CM_OBJ=

  AC_DEFINE([HAVE_ANDROID], [1], [Define to 1 if Emacs is being built
with Android support])

  AS_IF([test "$XCONFIGURE" != "android"], [
    AC_DEFINE([ANDROID_STUBIFY], [1], [Define to 1 if Emacs is being built
for Android, but all API calls need to be stubbed out])

    # Now set any shared user ID that was specified.
    AS_IF([test -n "$with_shared_user_id"],
      [emacs_val=$with_shared_user_id
       emacs_val=`AS_ECHO(["$with_shared_user_id"]) \
                  | sed -e 's/"/\\"/'`
       emacs_val="\"$emacs_val\""
       ANDROID_SHARED_USER_ID="android:sharedUserId=$emacs_val"
       # `android:sharedUserName' is required for sharedUserID to work
       # on recent Android releases.  It does not otherwise affect the
       # behavior of any code.
       emacs_val="\"@string/shared_user_name\""
       ANDROID_SHARED_USER_NAME="android:sharedUserLabel=$emacs_val"])],[
    # Emacs will be built as a shared library, and a wrapper around it
    # will also be built for the benefit of applications.  This
    # requires Emacs be built as a position independent executable.
    ANDROID_BUILD_CFLAGS="-fPIC -fvisibility=hidden"

    # Graphics code in sfntfont-android.c benefits heavily from
    # vectorization.
    ANDROID_BUILD_CFLAGS="$ANDROID_BUILD_CFLAGS -ftree-vectorize"

    # Link with libraries required for Android support.
    # API 9 and later require `-landroid' for the asset manager.
    # API 8 uses an emulation via the JNI.
    AS_IF([test "$ANDROID_SDK" -lt "9"],
      [ANDROID_LIBS="-llog -ljnigraphics"],
      [ANDROID_LIBS="-landroid -llog -ljnigraphics"])

    # This is required to make the system load emacs.apk's libpng
    # (among others) instead of the system's own.  But it doesn't work
    # on all Android versions yet, so for now just suffix shared
    # libraries with _emacs.
    # ANDROID_LDFLAGS="-Wl,-rpath,'\$\$ORIGIN'"

    # Link with the sfnt font library and sfntfont.o, along with
    # sfntfont-android.o.
    ANDROID_OBJ="$ANDROID_OBJ sfnt.o sfntfont.o sfntfont-android.o"

    # Build androidselect.o and androidvfs.o.
    ANDROID_OBJ="$ANDROID_OBJ androidselect.o androidvfs.o"

    # Check for some functions not always present in the NDK.
    AC_CHECK_DECLS([android_get_device_api_level])

    # Mention this build is really for Android.
    REALLY_ANDROID=yes])])

AC_SUBST([ANDROID])
AC_SUBST([ANDROID_OBJ])
AC_SUBST([ANDROID_LIBS])
AC_SUBST([ANDROID_LDFLAGS])
AC_SUBST([ANDROID_BUILD_CFLAGS])
AC_SUBST([ANDROID_SHARED_USER_ID])
AC_SUBST([ANDROID_SHARED_USER_NAME])

# Check for pw_gecos in struct passwd; this is known to be missing on
# Android.

AH_TEMPLATE([USER_FULL_NAME], [How to get a user's full name.])
AC_CHECK_MEMBERS([struct passwd.pw_gecos], [], [], [#include <pwd.h>])
AS_IF([test x"$REALLY_ANDROID" = "xyes"],
  [AC_DEFINE([USER_FULL_NAME], [android_user_full_name (pw)])],
  [AS_IF([test x"$ac_cv_member_struct_passwd_pw_gecos" = "xyes"],
    [AC_DEFINE([USER_FULL_NAME], [pw->pw_gecos])],
    [AC_DEFINE([USER_FULL_NAME], [NULL])])])

if test "${with_pgtk}" = "yes"; then
  window_system=pgtk
fi

if test "${ANDROID}" != "yes"; then
  AC_PATH_X
  if test "$no_x" != yes && test "${with_pgtk}" != "yes"; then
    window_system=x11
  fi
fi

LD_SWITCH_X_SITE_RPATH=
if test "${x_libraries}" != NONE; then
  if test -n "${x_libraries}"; then
    LD_SWITCH_X_SITE=-L`AS_ECHO(["$x_libraries"]) | sed -e 's/:/ -L/g'`
    LD_SWITCH_X_SITE_RPATH=-Wl,-rpath,`
      AS_ECHO(["$x_libraries"]) | sed -e 's/:/ -Wl,-rpath,/g'
    `
  fi
  x_default_search_path=""
  x_search_path=${x_libraries}
  if test -z "${x_search_path}"; then
    x_search_path=/usr/lib
  fi
  for x_library in `AS_ECHO(["$x_search_path:"]) | \
		    sed -e "s/:/ /g" -e p -e "s:/lib[[^ /]]* :/share :g"`; do
    x_search_path="\
${x_library}/X11/%L/%T/%N%C%S:\
${x_library}/X11/%l/%T/%N%C%S:\
${x_library}/X11/%T/%N%C%S:\
${x_library}/X11/%L/%T/%N%S:\
${x_library}/X11/%l/%T/%N%S:\
${x_library}/X11/%T/%N%S"
    if test x"${x_default_search_path}" = x; then
      x_default_search_path=${x_search_path}
    else
      x_default_search_path="${x_search_path}:${x_default_search_path}"
    fi
  done
fi
AC_SUBST([LD_SWITCH_X_SITE_RPATH])

if test "${x_includes}" != NONE && test -n "${x_includes}"; then
  C_SWITCH_X_SITE=$isystem`AS_ECHO(["$x_includes"]) | sed -e "s/:/ $isystem/g"`
fi

if test x"${x_includes}" = x; then
  bitmapdir=/usr/include/X11/bitmaps
else
  # accumulate include directories that have X11 bitmap subdirectories
  AS_UNSET([bmd_acc])
  for bmd in `AS_ECHO(["$x_includes"]) | sed -e 's/:/ /g'`; do
    if test -d "${bmd}/X11/bitmaps"; then
      bmd_acc="${bmd_acc+$bmd_acc:}${bmd}/X11/bitmaps"
    fi
    if test -d "${bmd}/bitmaps"; then
      bmd_acc="${bmd_acc+$bmd_acc:}${bmd}/bitmaps"
    fi
  done
  bitmapdir=$bmd_acc
fi

NATIVE_IMAGE_API=no

test "${with_ns}" = maybe && test "${opsys}" != darwin && with_ns=no
HAVE_NS=no
NS_GNUSTEP_CONFIG=no
NS_IMPL_COCOA=no
NS_IMPL_GNUSTEP=no
tmp_CPPFLAGS="$CPPFLAGS"
tmp_CFLAGS="$CFLAGS"
CPPFLAGS="$CPPFLAGS -x objective-c"
CFLAGS="$CFLAGS -x objective-c"
GNU_OBJC_CFLAGS=""
LIBS_GNUSTEP=
if test "${with_ns}" != no; then
  # macfont.o requires macuvs.h which is absent after 'make extraclean',
  # so avoid NS_IMPL_COCOA if macuvs.h is absent.
  # Even a headless Emacs can build macuvs.h, so this should let you bootstrap.
  if test "${opsys}" = darwin && test -f "$srcdir/src/macuvs.h"; then
     NS_IMPL_COCOA=yes
     ns_appdir=`pwd`/nextstep/Emacs.app
     ns_appbindir=${ns_appdir}/Contents/MacOS
     ns_applibexecdir=${ns_appdir}/Contents/MacOS/libexec
     ns_applibdir=${ns_appdir}/Contents/Frameworks
     ns_appresdir=${ns_appdir}/Contents/Resources
     ns_appsrc=Cocoa/Emacs.base
     ns_fontfile=macfont.o
  elif flags=`(gnustep-config --objc-flags) 2>/dev/null`; then
     NS_IMPL_GNUSTEP=yes
     NS_GNUSTEP_CONFIG=yes
     GNU_OBJC_CFLAGS="$flags"
     LIBS_GNUSTEP=`gnustep-config --gui-libs || exit`
  elif test -f $GNUSTEP_CONFIG_FILE; then
     NS_IMPL_GNUSTEP=yes
     dnl FIXME sourcing this several times in subshells seems inefficient.
     GNUSTEP_SYSTEM_HEADERS=`. $GNUSTEP_CONFIG_FILE \
       && AS_ECHO(["$GNUSTEP_SYSTEM_HEADERS"])`
     GNUSTEP_SYSTEM_LIBRARIES=` . $GNUSTEP_CONFIG_FILE \
       && AS_ECHO(["$GNUSTEP_SYSTEM_LIBRARIES"])`
     dnl I seemed to need these as well with GNUstep-startup 0.25.
     GNUSTEP_LOCAL_HEADERS=`. $GNUSTEP_CONFIG_FILE \
       && AS_ECHO(["$GNUSTEP_LOCAL_HEADERS"])`
     GNUSTEP_LOCAL_LIBRARIES=`. $GNUSTEP_CONFIG_FILE \
       && AS_ECHO(["$GNUSTEP_LOCAL_LIBRARIES"])`
     test "x${GNUSTEP_LOCAL_HEADERS}" != "x" && \
       GNUSTEP_LOCAL_HEADERS="-I${GNUSTEP_LOCAL_HEADERS}"
     test "x${GNUSTEP_LOCAL_LIBRARIES}" != "x" && \
       GNUSTEP_LOCAL_LIBRARIES="-L${GNUSTEP_LOCAL_LIBRARIES}"
     CPPFLAGS="$CPPFLAGS -isystem ${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
     CFLAGS="$CFLAGS -isystem ${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
     LDFLAGS="$LDFLAGS -L${GNUSTEP_SYSTEM_LIBRARIES} ${GNUSTEP_LOCAL_LIBRARIES}"
     LIBS_GNUSTEP="-lgnustep-gui -lgnustep-base -lobjc -lpthread"
     dnl GNUstep defines BASE_NATIVE_OBJC_EXCEPTIONS to 0 or 1.
     dnl If they had chosen to either define it or not, we could have
     dnl just used AC_CHECK_DECL here.
     AC_CACHE_CHECK([if GNUstep defines BASE_NATIVE_OBJC_EXCEPTIONS],
       [emacs_cv_objc_exceptions],
       [AC_COMPILE_IFELSE(
	  [AC_LANG_PROGRAM([[#include <GNUstepBase/GSConfig.h>]],
[[#if defined BASE_NATIVE_OBJC_EXCEPTIONS && BASE_NATIVE_OBJC_EXCEPTIONS > 0
1;
#else
fail;
#endif]])],
       [emacs_cv_objc_exceptions=yes],
       [emacs_cv_objc_exceptions=no])])
     if test $emacs_cv_objc_exceptions = yes; then
       dnl _NATIVE_OBJC_EXCEPTIONS is used by the GNUstep headers.
       AC_DEFINE([_NATIVE_OBJC_EXCEPTIONS], [1],
         [Define if GNUstep uses ObjC exceptions.])
       GNU_OBJC_CFLAGS="$GNU_OBJC_CFLAGS -fobjc-exceptions"
     fi
  fi
  if test $NS_IMPL_GNUSTEP = yes; then
     ns_appdir=`pwd`/nextstep/Emacs.app
     ns_appbindir=${ns_appdir}
     ns_applibexecdir=${ns_appdir}/libexec
     ns_applibdir=${ns_appdir}/Frameworks
     ns_appresdir=${ns_appdir}/Resources
     ns_appsrc=GNUstep/Emacs.base
     ns_fontfile=nsfont.o
  fi

  dnl This is only used while we test the NS headers, it gets reset below.
  CPPFLAGS="$CPPFLAGS $GNU_OBJC_CFLAGS"
  CFLAGS="$CFLAGS $GNU_OBJC_CFLAGS"

  AC_CHECK_HEADER([AppKit/AppKit.h], [HAVE_NS=yes],
		  [AC_MSG_ERROR([The include files (AppKit/AppKit.h etc) that
are required for a Nextstep build are missing or cannot be compiled.
Either fix this, or re-configure with the option '--without-ns'.])])

  macfont_file=""
  if test "${NS_IMPL_COCOA}" = "yes"; then
    AC_MSG_CHECKING([for Mac OS X 10.6 or newer])
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <AppKit/AppKit.h>],
                                     [
#ifdef MAC_OS_X_VERSION_MAX_ALLOWED
#if MAC_OS_X_VERSION_MAX_ALLOWED >= 1060
 ; /* OK */
#else
 error "Mac OS X 10.6 or newer required";
#endif
#endif
		    ])],
		    [ns_osx_have_106=yes],
		    [ns_osx_have_106=no])
    AC_MSG_RESULT([$ns_osx_have_106])

    if test $ns_osx_have_106 = no; then
       AC_MSG_ERROR([Mac OS X 10.6 or newer is required]);
    fi
  fi

  AC_CACHE_CHECK([for Mac OS X 12.0 or later],
                 [emacs_cv_macosx_12_0],
                 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <AvailabilityMacros.h>
#if MAC_OS_X_VERSION_MAX_ALLOWED >= 120000
Mac OS X 12.x or later.
#endif
                 ]])], [emacs_cv_macosx_12_0=no],
                 [emacs_cv_macosx_12_0=yes]))

  if test "${with_native_image_api}" = yes; then
     AC_DEFINE([HAVE_NATIVE_IMAGE_API], [1],
       [Define to use native OS APIs for images.])
     NATIVE_IMAGE_API="yes (ns)"
  fi

  if test "${NS_IMPL_GNUSTEP}" = yes; then
    AC_CHECK_DECLS([NSImageNameCaution], [], [],
                   [[#import <AppKit/NSImage.h>]])
  fi
fi

AC_SUBST([LIBS_GNUSTEP])

INSTALL_ARCH_INDEP_EXTRA=install-etc
ns_self_contained=no
NS_OBJ=
NS_OBJC_OBJ=
if test "${HAVE_NS}" = yes; then
  if test "$with_toolkit_scroll_bars" = "no"; then
    AC_MSG_WARN([Non-toolkit scroll bars are not implemented for Nextstep.])
  fi

  window_system=nextstep
  # set up packaging dirs
  if test "${EN_NS_SELF_CONTAINED}" = yes; then
     AC_DEFINE([NS_SELF_CONTAINED], [1], [Build an NS bundled app])
     ns_self_contained=yes
     prefix=${ns_appresdir}
     exec_prefix=${ns_appbindir}
     dnl This one isn't really used, only archlibdir is.
     libexecdir="\${ns_applibexecdir}"
     archlibdir="\${ns_applibexecdir}"
     etcdocdir="\${ns_appresdir}/etc"
     etcdir="\${ns_appresdir}/etc"
     dnl FIXME maybe set datarootdir instead.
     dnl That would also get applications, icons, man.
     infodir="\${ns_appresdir}/info"
     mandir="\${ns_appresdir}/man"
     lispdir="\${ns_appresdir}/lisp"
     lispdirrel="\${ns_appresdir}/lisp"
     test "$locallisppathset" = no && locallisppath="\${ns_appresdir}/site-lisp"
     INSTALL_ARCH_INDEP_EXTRA=
  fi

  NS_OBJC_OBJ="nsterm.o nsfns.o nsmenu.o nsselect.o nsimage.o $ns_fontfile"
fi
CFLAGS="$tmp_CFLAGS"
CPPFLAGS="$tmp_CPPFLAGS"
AC_SUBST([INSTALL_ARCH_INDEP_EXTRA])
AC_SUBST([ns_self_contained])
AC_SUBST([NS_OBJ])
AC_SUBST([NS_OBJC_OBJ])

if test "${HAVE_NS}" = yes; then
  AC_LANG_PUSH([Objective C])
  AC_CACHE_CHECK(
    [if the Objective C compiler supports instancetype],
    [emacs_cv_objc_instancetype],
    [AC_COMPILE_IFELSE(
       [AC_LANG_SOURCE([[@interface Test
                          + (instancetype)test;
                          @end]])],
       [emacs_cv_objc_instancetype=yes],
       [emacs_cv_objc_instancetype=no])])

  if test x$emacs_cv_objc_instancetype = xyes ; then
    AC_DEFINE([NATIVE_OBJC_INSTANCETYPE], [1],
              [Define if ObjC compiler supports instancetype natively.])
  fi

  AC_CACHE_CHECK(
    [for C99-or-better flag for Objective C compiler],
    [emacs_cv_objc_c99_or_better],
    [save_OBJCFLAGS=$OBJCFLAGS
     for emacs_cv_objc_c99_or_better in \
	'none needed' -std=gnu23 -std=gnu17 -std=gnu11 -std=gnu99 ''
     do
       AS_CASE([$emacs_cv_objc_c99_or_better],
	 ['none needed'], [],
	 [-*], [OBJCFLAGS="$save_OBJCFLAGS $emacs_cv_objc_c99_or_better"],
	 [continue])
       AC_COMPILE_IFELSE(
	 [AC_LANG_PROGRAM([], [[for (int i = 0;;);]])],
	 [break])
     done
     OBJCFLAGS=$save_OBJCFLAGS])
  AS_CASE([$emacs_cv_objc_c99_or_better],
    [-*], [GNU_OBJC_CFLAGS="$GNU_OBJC_CFLAGS $emacs_cv_objc_c99_or_better"])

  AC_LANG_POP([Objective C])
fi

HAVE_BE_APP=no
if test "${opsys}" = "haiku" && test "${with_be_app}" = "yes"; then
   dnl Only GCC is supported.  Clang might work, but it's
   dnl not reliable, so don't check for it here.
   AC_PROG_CXX([gcc g++])
   CXXFLAGS="$CXXFLAGS $emacs_g3_CFLAGS"
   AC_LANG_PUSH([C++])
   AC_CHECK_HEADER([app/Application.h], [HAVE_BE_APP=yes],
                   [AC_MSG_ERROR([The Application Kit headers required for building
with the Application Kit were not found or cannot be compiled. Either fix this, or
re-configure with the option '--without-be-app'.])])
   AC_CACHE_CHECK([whether BObjectList accepts ownership as a template parameter],
     [emacs_cv_bobjectlist_ownership_is_template_parameter],
     [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
			   #include <support/ObjectList.h>
			   #include <interface/StringItem.h>
			   static BObjectList<BStringItem, true> test;]], [])],
        [emacs_cv_bobjectlist_ownership_is_template_parameter=yes],
	[emacs_cv_bobjectlist_ownership_is_template_parameter=no])])
   AS_IF([test "x$emacs_cv_bobjectlist_ownership_is_template_parameter" = "xyes"],
     [AC_DEFINE([BOBJECTLIST_OWNERSHIP_IS_TEMPLATE_PARAMETER], [1],
       [Define to 1 if BObjectList ownership is defined as a template parameter.])])
   AC_LANG_POP([C++])
fi

AC_SUBST([HAVE_BE_APP])

HAVE_W32=no
W32_OBJ=
W32_LIBS=
EMACSRES=
CLIENTRES=
CLIENTW=
W32_RES_LINK=
EMACS_MANIFEST=
if test "${with_w32}" != no; then
  case "${opsys}" in
    cygwin)
      AC_CHECK_HEADER([windows.h], [HAVE_W32=yes],
             [AC_MSG_ERROR(['--with-w32' was specified, but windows.h
                   cannot be found.])])
    ;;
    mingw32)
    ## Using --with-w32 with MinGW is a no-op, but we allow it.
    ;;
    *)
      AC_MSG_ERROR([Using w32 with an autotools build is only supported for Cygwin and MinGW32.])
    ;;
  esac
fi

if test "${opsys}" = "mingw32"; then
  AC_CACHE_CHECK([whether Windows API headers are recent enough], [emacs_cv_w32api],
  [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
     #include <windows.h>
     #include <usp10.h>]],
   [[PIMAGE_NT_HEADERS pHeader;
     PIMAGE_SECTION_HEADER pSection = IMAGE_FIRST_SECTION(pHeader)]])],
   [emacs_cv_w32api=yes], [emacs_cv_w32api=no])])
  if test "${emacs_cv_w32api}" = "no"; then
    AC_MSG_ERROR([the Windows API headers are too old to support this build.])
  fi
  HAVE_W32=${emacs_cv_w32api}
fi

NTDIR=
LIBS_ECLIENT=
LIB_WSOCK32=
NTLIB=
XARGS_LIMIT=
if test "${HAVE_W32}" = "yes"; then
  AC_DEFINE([HAVE_NTGUI], [1], [Define to use native MS Windows GUI.])
  if test "$with_toolkit_scroll_bars" = "no"; then
    AC_MSG_ERROR([Non-toolkit scroll bars are not implemented for w32 build.])
  fi
  AC_CHECK_TOOL([WINDRES], [windres],
                [AC_MSG_ERROR([No resource compiler found.])])
  W32_OBJ="w32fns.o w32menu.o w32reg.o w32font.o w32term.o"
  W32_OBJ="$W32_OBJ w32xfns.o w32select.o w32uniscribe.o w32dwrite.o w32cygwinx.o"
  EMACSRES="emacs.res"
  case "$canonical" in
    x86_64-*-*) EMACS_MANIFEST="emacs-x64.manifest" ;;
    *) EMACS_MANIFEST="emacs-x86.manifest" ;;
  esac
  dnl Construct something of the form "24,4,0,0" with 4 components.
  comma_version=`echo "${PACKAGE_VERSION}.0.0" | sed -e 's/\./,/g' -e 's/^\([[^,]]*,[[^,]]*,[[^,]]*,[[^,]]*\).*/\1/'`

  comma_space_version=`echo "$comma_version" | sed 's/,/, /g'`
  AC_SUBST([comma_version])
  AC_SUBST([comma_space_version])
  AC_CONFIG_FILES([nt/emacs.rc nt/emacsclient.rc])
  if test "${opsys}" = "cygwin"; then
    W32_LIBS="$W32_LIBS -lkernel32 -luser32 -lusp10 -lgdi32"
    W32_LIBS="$W32_LIBS -lole32 -lcomdlg32 -lcomctl32 -lwinspool"
    # Tell the linker that emacs.res is an object (which we compile from
    # the rc file), not a linker script.
    W32_RES_LINK="-Wl,emacs.res"
  else
    W32_OBJ="$W32_OBJ w32.o w32console.o w32heap.o w32inevt.o w32proc.o"
    dnl FIXME: This should probably be supported for Cygwin/w32 as
    dnl well, but the Cygwin build needs to link against -lgdiplus
    if test "${with_native_image_api}" = yes; then
      AC_DEFINE([HAVE_NATIVE_IMAGE_API], [1],
	[Define to use native OS APIs for images.])
      NATIVE_IMAGE_API="yes (w32)"
      W32_OBJ="$W32_OBJ w32image.o"
    fi
    W32_LIBS="$W32_LIBS -lwinmm -lgdi32 -lcomdlg32"
    W32_LIBS="$W32_LIBS -lmpr -lwinspool -lole32 -lcomctl32"
    W32_RES_LINK="\$(EMACSRES)"
    CLIENTRES="emacsclient.res"
    CLIENTW="emacsclientw\$(EXEEXT)"
    NTDIR=nt
    CM_OBJ=
    LIBS_ECLIENT="-lcomctl32"
    LIB_WSOCK32="-lwsock32"
    NTLIB="ntlib.$ac_objext"
    XARGS_LIMIT="-s 10000"
  fi
fi

if test "${HAVE_W32}" = "no" && test "${opsys}" = "cygwin"; then
  W32_LIBS="-lkernel32"
  W32_OBJ="w32cygwinx.o"
fi

AC_SUBST([W32_OBJ])
AC_SUBST([W32_LIBS])
AC_SUBST([EMACSRES])
AC_SUBST([EMACS_MANIFEST])
AC_SUBST([CLIENTRES])
AC_SUBST([CLIENTW])
AC_SUBST([W32_RES_LINK])
AC_SUBST([NTDIR])
AC_SUBST([CM_OBJ])
AC_SUBST([LIBS_ECLIENT])
AC_SUBST([LIB_WSOCK32])
AC_SUBST([NTLIB])
AC_SUBST([XARGS_LIMIT])

if test "${HAVE_W32}" = "yes"; then
  window_system=w32
  with_xft=no
fi

HAIKU_OBJ=
HAIKU_CXX_OBJ=
HAIKU_LIBS=
HAIKU_CFLAGS=

if test "$opsys" = "haiku"; then
  HAIKU_OBJ="$HAIKU_OBJ haiku.o"
fi

if test "${HAVE_BE_APP}" = "yes"; then
  AC_DEFINE([HAVE_HAIKU], [1],
      [Define if Emacs will be built with Haiku windowing support])
fi

if test "${HAVE_BE_APP}" = "yes"; then
  window_system=haiku
  with_xft=no
  HAIKU_OBJ="$HAIKU_OBJ haikufns.o haikuterm.o haikumenu.o haikufont.o haikuselect.o haiku_io.o"
  HAIKU_CXX_OBJ="haiku_support.o haiku_font_support.o haiku_draw_support.o haiku_select.o"
  HAIKU_LIBS="-lbe -lgame -ltranslation -ltracker" # -lgame is needed for set_mouse_position.

  if test "${with_native_image_api}" = yes; then
     AC_DEFINE([HAVE_NATIVE_IMAGE_API], [1],
       [Define to use native OS APIs for images.])
     NATIVE_IMAGE_API="yes (haiku)"
     HAIKU_OBJ="$HAIKU_OBJ haikuimage.o"
  fi
fi

AC_SUBST([HAIKU_LIBS])
AC_SUBST([HAIKU_OBJ])
AC_SUBST([HAIKU_CXX_OBJ])
AC_SUBST([HAIKU_CFLAGS])

## $window_system is now set to the window system we will
## ultimately use.

term_header=
HAVE_X_WINDOWS=no
HAVE_X11=no
USE_X_TOOLKIT=none
HAVE_PGTK=no

case "${window_system}" in
  x11 )
    HAVE_X_WINDOWS=yes
    HAVE_X11=yes
    term_header=xterm.h
    case "${with_x_toolkit}" in
      athena | lucid ) USE_X_TOOLKIT=LUCID ;;
      motif ) USE_X_TOOLKIT=MOTIF ;;
      gtk ) with_gtk=yes
            term_header=gtkutil.h
dnl Don't set this for GTK.  A lot of tests below assumes Xt when
dnl USE_X_TOOLKIT is set.
            USE_X_TOOLKIT=none ;;
      gtk2 ) with_gtk2=yes
             term_header=gtkutil.h
             USE_X_TOOLKIT=none ;;
      gtk3 ) with_gtk3=yes
             term_header=gtkutil.h
             USE_X_TOOLKIT=none ;;
      no ) USE_X_TOOLKIT=none ;;
dnl If user did not say whether to use a toolkit, make this decision later:
dnl use the toolkit if we have gtk, or X11R5 or newer.
      * ) USE_X_TOOLKIT=maybe ;;
    esac
  ;;
  nextstep )
    term_header=nsterm.h
  ;;
  w32 )
    term_header=w32term.h
  ;;
  pgtk )
    term_header=pgtkterm.h
    with_gtk3=yes
    USE_X_TOOLKIT=none
    HAVE_PGTK=yes
    AC_DEFINE([HAVE_PGTK], [1], [Define to 1 if you have pure Gtk+-3.])
  ;;
  haiku )
    term_header=haikuterm.h
  ;;
  android )
    term_header=androidterm.h
  ;;
esac

AC_SUBST([HAVE_PGTK])

if test "$window_system" = none && test "X$with_x" != "Xno"; then
   AC_CHECK_PROG([HAVE_XSERVER], [X], [true], [false])
   if test "$HAVE_XSERVER" = true ||
      test -n "$DISPLAY" ||
      {
        for emacs_libX11 in /usr/lib/libX11.*; do break; done
        test "$emacs_libX11" != '/usr/lib/libX11.*'
      }
   then
        AC_MSG_ERROR([You seem to be running X, but no X development libraries
were found.  You should install the relevant development files for X
and for the toolkit you want, such as Gtk+ or Motif.  Also make
sure you have development files for image handling, i.e.
tiff, gif, jpeg, png and xpm.
If you are sure you want Emacs compiled without X window support, pass
  --without-x
to configure.])
   fi
fi

# Does the opsystem file prohibit the use of the GNU malloc?
# Assume not, until told otherwise.
GNU_MALLOC=yes

AC_CACHE_CHECK(
  [whether malloc is Doug Lea style],
  [emacs_cv_var_doug_lea_malloc],
  [emacs_cv_var_doug_lea_malloc=no
   dnl Hooks do not work with address sanitization.
   if test "$emacs_cv_sanitize_address" != yes; then
     AC_LINK_IFELSE(
       [AC_LANG_PROGRAM(
	  [[#include <malloc.h>
	    static void hook (void) {}]],
          [[__after_morecore_hook = hook;
	    __malloc_initialize_hook = hook;]])],
       [emacs_cv_var_doug_lea_malloc=yes])
   fi])
doug_lea_malloc=$emacs_cv_var_doug_lea_malloc

AC_CHECK_ALIGNOF([EMACS_INT],
  [[#include <limits.h>
    #include <stddef.h>
    #include <stdint.h>
    #if INTPTR_MAX <= INT_MAX && !defined WIDE_EMACS_INT
    typedef int EMACS_INT;
    #elif INTPTR_MAX <= LONG_MAX && !defined WIDE_EMACS_INT
    typedef long int EMACS_INT;
    #elif INTPTR_MAX <= LLONG_MAX
    typedef long long int EMACS_INT;
    #endif
  ]])

AC_CHECK_SIZEOF([long])

AC_CACHE_CHECK([for struct alignment],
  [emacs_cv_struct_alignment],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM([[#include <stddef.h>
			struct s { char c; } __attribute__ ((aligned (8)));
			struct t { char c; struct s s; };
			char verify[offsetof (struct t, s) == 8 ? 1 : -1];
		      ]])],
     [emacs_cv_struct_alignment=yes],
     [emacs_cv_struct_alignment=no])])
if test "$emacs_cv_struct_alignment" = yes; then
  AC_DEFINE([HAVE_STRUCT_ATTRIBUTE_ALIGNED], [1],
    [Define to 1 if 'struct __attribute__ ((aligned (N)))' aligns the
     structure to an N-byte boundary.])
fi

dnl Work around a glitch if aclocal is invoked outside of autogen.sh.
dnl Such an invocation generates an aclocal.m4 that lacks m4/stdalign.m4.
dnl The following hack checks the otherwise-uninvolved macro gl_STDALIGN_H
dnl so that the hack itself does not generate a diagnostic.
m4_divert_push([KILL])
m4_ifdef([gl_STDALIGN_H], [], [m4_include([m4/stdalign.m4])])
m4_divert_pop([KILL])

dnl Check for alignas now rather than waiting for gl_INIT to do it,
dnl as the system_malloc=no test below needs $gl_cv_header_working_stdalign_h.
dnl Do not simply call gl_INIT here, as the ac_cv_func_pthread_sigmask=yes
dnl assignment below affects how gl_INIT works.
dnl Instead, call gl_ALIGNASOF, the only part of gl_INIT needed here.
dnl Then make gl_ALIGNASOF a no-op so gl_INIT does not duplicate its code.
gl_ALIGNASOF
AC_DEFUN([gl_ALIGNASOF])

system_malloc=yes

# If it appears as if the system malloc can't be trusted to return
# adequately positioned memory, enable the GNU malloc, which more
# consistently provides allocations at low addresses, as is required for
# the pdumper to load dump files at a representable location.
AS_CASE([$emacs_cv_struct_alignment%$gl_cv_header_working_stdalign_h%$with_wide_int%$ac_cv_alignof_EMACS_INT%$with_pdumper],
  [*%*%*%*%*%*],
    [AC_MSG_ERROR([configuration values cannot contain '%'])],

  dnl There is no problem in most situations, i.e.:
  [dnl if emacs_cv_struct_alignment
   yes%* \
   dnl or if gl_cv_header_working_stdalign_h
   | *%yes*%*%*%* \
   dnl or if with_wide_int (as in practice tag bits are high-order)
   | *%*%yes%*%* \
   dnl or if EMACS_INT's alignment is at least 8.
   | *%*%*%8%* | *%*%*%[1-9]?*%*],
    [],

  dnl Otherwise, if using the portable dumper, enable GNU malloc.
  [*%yes],
    [system_malloc=no
     AC_MSG_WARN([The GNU memory manager will be enabled as your system
       does not guarantee that the portable dumper can allocate memory
       at a suitably low address.])])

dnl This must be before the test of $ac_cv_func_sbrk below.
AC_CHECK_FUNCS_ONCE([sbrk])

GMALLOC_OBJ=
if test "${system_malloc}" = "yes"; then
  AC_DEFINE([SYSTEM_MALLOC], [1],
    [Define to 1 to use the system memory allocator, even if it is not
     Doug Lea style.])
  GNU_MALLOC=no
  GNU_MALLOC_reason="
    (The GNU allocators don't work with this system configuration.)"
  VMLIMIT_OBJ=
else
  test "$doug_lea_malloc" != "yes" && GMALLOC_OBJ=gmalloc.o
  VMLIMIT_OBJ=vm-limit.o

  AC_CHECK_HEADERS([sys/vlimit.h])
  AC_CACHE_CHECK([for data_start], [emacs_cv_data_start],
    [AC_LINK_IFELSE(
       [AC_LANG_PROGRAM(
	 [[extern char data_start[]; char ch;]],
	 [[return data_start < &ch;]])],
       [emacs_cv_data_start=yes],
       [emacs_cv_data_start=no])])
  if test $emacs_cv_data_start = yes; then
    AC_DEFINE([HAVE_DATA_START], [1],
      [Define to 1 if data_start is the address of the start
       of the main data segment.])
  fi
fi
AC_SUBST([GMALLOC_OBJ])
AC_SUBST([VMLIMIT_OBJ])

if test "$doug_lea_malloc" = "yes"; then
  if test "$GNU_MALLOC" = yes ; then
    GNU_MALLOC_reason="
      (Using Doug Lea's new malloc from the GNU C Library.)"
  fi
  AC_DEFINE([DOUG_LEA_MALLOC], [1],
    [Define to 1 if the system memory allocator is Doug Lea style,
     with malloc hooks.])

  ## Use mmap directly for allocating larger buffers.
  ## FIXME this comes from src/s/{gnu,gnu-linux}.h:
  ## #ifdef DOUG_LEA_MALLOC; #undef REL_ALLOC; #endif
  ## Does the AC_FUNC_MMAP test below make this check unnecessary?
  case "$opsys" in
    mingw32|gnu*) REL_ALLOC=no ;;
  esac
fi

if test x"${REL_ALLOC}" = x; then
  REL_ALLOC=${GNU_MALLOC}
fi

use_mmap_for_buffers=no
case "$opsys" in
  mingw32) use_mmap_for_buffers=yes ;;
esac

AC_FUNC_MMAP
if test $use_mmap_for_buffers = yes; then
  AC_DEFINE([USE_MMAP_FOR_BUFFERS], [1],
    [Define to use mmap to allocate buffer text.])
  REL_ALLOC=no
fi

LIBS="$LIBS_SYSTEM $LIBS"

dnl FIXME replace main with a function we actually want from this library.
AC_CHECK_LIB([Xbsd], [main], [LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -lXbsd"])

dnl Check for the POSIX thread library.
LIB_PTHREAD=
AC_CHECK_HEADERS_ONCE([pthread.h])
if test "$ac_cv_header_pthread_h" && test "$opsys" != "mingw32"; then
  AC_CACHE_CHECK([for pthread library],
    [emacs_cv_pthread_lib],
    [emacs_cv_pthread_lib=no
     OLD_LIBS=$LIBS
     for emacs_pthread_lib in 'none needed' -lpthread; do
       case $emacs_pthread_lib in
	 -*) LIBS="$OLD_LIBS $emacs_pthread_lib";;
       esac
       AC_LINK_IFELSE(
	 [AC_LANG_PROGRAM(
	    [[#include <pthread.h>
	      #include <signal.h>
	      sigset_t old_mask, new_mask;
	      void noop (void) {}]],
	    [[pthread_t th = pthread_self ();
	      int status = 0;
	      status += pthread_create (&th, 0, 0, 0);
	      status += pthread_sigmask (SIG_BLOCK, &new_mask, &old_mask);
	      status += pthread_kill (th, 0);
	      #if ! (defined SYSTEM_MALLOC || defined DOUG_LEA_MALLOC)
	      /* Test for pthread_atfork only if gmalloc uses it,
		 as older-style hosts like MirBSD 10 lack it.  */
	      status += pthread_atfork (noop, noop, noop);
	      #endif
	      return status;]])],
	 [emacs_cv_pthread_lib=$emacs_pthread_lib])
       LIBS=$OLD_LIBS
       if test "$emacs_cv_pthread_lib" != no; then
	 break
       fi
     done])
  if test "$emacs_cv_pthread_lib" != no; then
    AC_DEFINE([HAVE_PTHREAD], [1], [Define to 1 if you have POSIX threads.])
    m4_foreach([emacs_type],
      [[max_align_t], [pthread_cond_t], [pthread_mutex_t]],
      [AC_CHECK_ALIGNOF(emacs_type,
	 [[#include <stddef.h>
	   #include <pthread.h>
	 ]])])
    case $emacs_cv_pthread_lib in
      -*) LIB_PTHREAD=$emacs_cv_pthread_lib;;
    esac
    ac_cv_func_pthread_sigmask=yes
    # Some systems optimize for single-threaded programs by default, and
    # need special flags to disable these optimizations. For example, the
    # definition of 'errno' in <errno.h>.
    case $opsys in
      hpux* | solaris)
	AC_DEFINE([_REENTRANT], [1],
	  [Define to 1 if your system requires this in multithreaded code.]);;
      aix4-2)
	AC_DEFINE([_THREAD_SAFE], [1],
	  [Define to 1 if your system requires this in multithreaded code.]);;
    esac
  fi
fi
AC_SUBST([LIB_PTHREAD])

AC_MSG_CHECKING([for thread support])
threads_enabled=no
if test "$with_threads" = yes; then
   if test "$emacs_cv_pthread_lib" != no; then
      AC_DEFINE([THREADS_ENABLED], [1],
                [Define to 1 if you want elisp thread support.])
      threads_enabled=yes
   elif test "${opsys}" = "mingw32"; then
      dnl MinGW can do native Windows threads even without pthreads
      AC_DEFINE([THREADS_ENABLED], [1],
                [Define to 1 if you want elisp thread support.])
      threads_enabled=yes
   fi
fi
AC_MSG_RESULT([$threads_enabled])

dnl Check for need for bigtoc support on IBM AIX

case ${host_os} in
aix*)
  AC_CACHE_CHECK([for -bbigtoc option], [gdb_cv_bigtoc], [
    case $GCC in
    yes) gdb_cv_bigtoc=-Wl,-bbigtoc ;;
    *) gdb_cv_bigtoc=-bbigtoc ;;
    esac

    LDFLAGS=$LDFLAGS\ $gdb_cv_bigtoc
    AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[int i;]])], [], [gdb_cv_bigtoc=])
  ])
  ;;
esac

# Change CFLAGS, CPPFLAGS, and LIBS temporarily so that C_SWITCH_X_SITE
# is for the tests that follow.  We set them back later on.

REAL_CFLAGS="$CFLAGS"
REAL_CPPFLAGS="$CPPFLAGS"
REAL_LIBS="$LIBS"

if test "${HAVE_X11}" = "yes"; then
  DEFS="$C_SWITCH_X_SITE $DEFS"
  LDFLAGS="$LDFLAGS $LD_SWITCH_X_SITE"
  LIBS="-lX11 $LIBS"
  CFLAGS="$C_SWITCH_X_SITE $CFLAGS"
  CPPFLAGS="$C_SWITCH_X_SITE $CPPFLAGS"

  # On Solaris, arrange for LD_RUN_PATH to point to the X libraries for tests.
  # This is handled by LD_SWITCH_X_SITE_RPATH during the real build,
  # but it's more convenient here to set LD_RUN_PATH since this
  # also works on hosts that don't understand LD_SWITCH_X_SITE_RPATH.
  if test "${x_libraries}" != NONE && test -n "${x_libraries}"; then
    LD_RUN_PATH=$x_libraries${LD_RUN_PATH+:}$LD_RUN_PATH
    export LD_RUN_PATH
  fi

  # Reportedly, some broken Solaris systems have XKBlib.h but are missing
  # header files included from there.
  AC_CACHE_CHECK([for Xkb], [emacs_cv_xkb],
  [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <X11/Xlib.h>
#include <X11/XKBlib.h>]],
	[[XkbDescPtr kb = XkbGetKeyboard (0, XkbAllComponentsMask, XkbUseCoreKbd);]])],
	[emacs_cv_xkb=yes],
	[emacs_cv_xkb=no])])
  if test $emacs_cv_xkb = yes; then
    AC_DEFINE([HAVE_XKB], [1], [Define to 1 if you have the Xkb extension.])
    AC_CHECK_FUNCS([XkbRefreshKeyboardMapping XkbFreeNames])
  fi

  AC_CHECK_FUNCS([XrmSetDatabase XScreenResourceString XScreenNumberOfScreen])
  AC_CHECK_FUNCS([XDisplayCells XDestroySubwindows])
fi

if test "${window_system}" = "x11"; then
  AC_MSG_CHECKING([X11 version 6])
  AC_CACHE_VAL([emacs_cv_x11_version_6],
  [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <X11/Xlib.h>]],
[[#if XlibSpecificationRelease < 6
fail;
#endif
]])], [emacs_cv_x11_version_6=yes],
      [emacs_cv_x11_version_6=no])])
  if test $emacs_cv_x11_version_6 = yes; then
    AC_MSG_RESULT([6 or newer])
    AC_DEFINE([HAVE_X11R6], [1],
	      [Define to 1 if you have the X11R6 or newer version of Xlib.])
    AC_DEFINE([HAVE_X_I18N], [1], [Define if you have usable i18n support.])
    AC_CHECK_MEMBERS([XICCallback.callback], [], [], [#include <X11/Xlib.h>])
    ## inoue@ainet.or.jp says Solaris has a bug related to X11R6-style
    ## XIM support.
    case "$opsys" in
      solaris) : ;;
      *) AC_DEFINE([HAVE_X11R6_XIM], [1],
           [Define if you have usable X11R6-style XIM support.])
         ;;
    esac
  else
    AC_MSG_RESULT([before 6])
  fi
fi

### Use -lrsvg-2 if available, unless '--with-rsvg=no' is specified.
HAVE_RSVG=no
if test "${HAVE_X11}" = "yes" || test "${HAVE_NS}" = "yes" \
   || test "${opsys}" = "mingw32" || test "${HAVE_BE_APP}" = "yes" \
   || test "${window_system}" = "pgtk" \
   || test "${REALLY_ANDROID}" = "yes"; then
  if test "${with_rsvg}" != "no"; then
    RSVG_REQUIRED=2.14.0
    AS_IF([test "${REALLY_ANDROID}" = "yes"],
      [RSVG_MODULE="librsvg"],
      [RSVG_MODULE="librsvg-2.0 >= $RSVG_REQUIRED"])

    EMACS_CHECK_MODULES([RSVG], [$RSVG_MODULE])
    AC_SUBST([RSVG_CFLAGS])
    AC_SUBST([RSVG_LIBS])

    if test $HAVE_RSVG = yes; then
      AC_DEFINE([HAVE_RSVG], [1], [Define to 1 if using librsvg.])
      CFLAGS="$CFLAGS $RSVG_CFLAGS"
      # Windows loads librsvg dynamically
      if test "${opsys}" = "mingw32"; then
	RSVG_LIBS=
      fi
    fi
  fi
fi

### Use -lwebp if available, unless '--with-webp=no'
HAVE_WEBP=no
if test "${with_webp}" != "no"; then
   if test "${HAVE_X11}" = "yes" || test "${opsys}" = "mingw32" \
   || test "${HAVE_W32}" = "yes" || test "${HAVE_NS}" = "yes" \
   || test "${HAVE_BE_APP}" = "yes" || test "${HAVE_PGTK}" = "yes" \
   || test "${REALLY_ANDROID}" = "yes"; then
      WEBP_REQUIRED=0.6.0
      # Definitions from webp/decode.h are in libwebp, and those from
      # webp/demux.h in libwebpdemux, which depends on libwebp.
      WEBP_MODULE="libwebpdemux >= $WEBP_REQUIRED libwebp >= $WEBP_REQUIRED"

      EMACS_CHECK_MODULES([WEBP], [$WEBP_MODULE])

      # If for some reason we still don't have functions from
      # webp/decode.h, try libwebpdecoder as well, which is the
      # decoder-only subset of libwebp (bug#61988, bug#66221).

      OLD_CFLAGS=$CFLAGS
      OLD_LIBS=$LIBS
      CFLAGS="$CFLAGS $WEBP_CFLAGS"
      LIBS="$WEBP_LIBS $LIBS"

      AS_IF([test "$REALLY_ANDROID" != "yes"], [
        AC_CHECK_FUNC([WebPDecodeRGBA], [],
          [WEBP_MODULE="libwebpdemux >= $WEBP_REQUIRED"
           WEBP_MODULE="$WEBP_MODULE libwebpdecoder >= $WEBP_REQUIRED"
	   HAVE_WEBP=no
	   AS_UNSET([WEBP_LIBS])
	   AS_UNSET([WEBP_CFLAGS])
	   EMACS_CHECK_MODULES([WEBP], [$WEBP_MODULE])])])

      CFLAGS=$OLD_CFLAGS
      LIBS=$OLD_LIBS

      AC_SUBST([WEBP_CFLAGS])
      AC_SUBST([WEBP_LIBS])
   fi
   if test $HAVE_WEBP = yes; then
      AC_DEFINE([HAVE_WEBP], [1], [Define to 1 if using libwebp.])
      # Windows loads libwebp dynamically
      if test "${opsys}" = "mingw32"; then
	WEBP_LIBS=
      fi
   fi
fi

### Use -lsqlite3 if available, unless '--with-sqlite3=no'
HAVE_SQLITE3=no
SQLITE3_LIBS=
SQLITE3_CFLAGS=
if test "${with_sqlite3}" != "no"; then
   if test "${REALLY_ANDROID}" = "yes"; then
     ndk_SEARCH_MODULE([sqlite3], [SQLITE3], [HAVE_SQLITE3=yes])

     if test "$HAVE_SQLITE3" = "yes"; then
       SAVE_CFLAGS="$CFLAGS"
       CFLAGS="$CFLAGS $SQLITE3_CFLAGS"
       AC_CHECK_DECL([sqlite3_open_v2], [HAVE_SQLITE=yes],
         [HAVE_SQLITE3=no], [#include <sqlite3.h>])
       CFLAGS="$SAVE_CFLAGS"
     fi
   else
     AC_CACHE_CHECK([for sqlite3],
       [emacs_cv_have_sqlite3],
       [OLIBS=$LIBS
	LIBS="-lsqlite3 $LIBS"
	AC_LINK_IFELSE(
	  [AC_LANG_PROGRAM([[#include <sqlite3.h>
			     sqlite3 *handle;]],
			   [[return sqlite3_open_v2 ("", &handle, 0, "");]])],
	  [emacs_cv_have_sqlite3=yes],
	  [emacs_cv_have_sqlite3=no])
	LIBS=$OLIBS])
     HAVE_SQLITE3=$emacs_cv_have_sqlite3
     if test "$HAVE_SQLITE3" = "yes"; then
       SQLITE3_LIBS=-lsqlite3
       LIBS="$SQLITE3_LIBS $LIBS"
       # Windows loads libsqlite dynamically
       if test "${opsys}" = "mingw32"; then
	  SQLITE3_LIBS=
       fi
       AC_CHECK_LIB([sqlite3], [sqlite3_load_extension],
	 [HAVE_SQLITE3_LOAD_EXTENSION=yes],
	 [HAVE_SQLITE3_LOAD_EXTENSION=no])
       if test "$HAVE_SQLITE3_LOAD_EXTENSION" = "yes"; then
	 AC_DEFINE([HAVE_SQLITE3_LOAD_EXTENSION], [1],
	   [Define to 1 if sqlite3 supports loading extensions.])
       fi
     fi
  fi

  if test "$HAVE_SQLITE3" = "yes"; then
    AC_DEFINE([HAVE_SQLITE3], [1],
      [Define to 1 if you have the libsqlite3 library (-lsqlite).])
  fi
fi

AC_SUBST([SQLITE3_LIBS])
AC_SUBST([SQLITE3_CFLAGS])

HAVE_IMAGEMAGICK=no
if test "${HAVE_X11}" = "yes" || test "${HAVE_NS}" = "yes" || test "${HAVE_W32}" = "yes" || \
   test "${HAVE_BE_APP}" = "yes" || test "${window_system}" = "pgtk" || \
   test "${REALLY_ANDROID}" = "yes"; then
  if test "${with_imagemagick}" != "no"; then
    if test -n "$BREW"; then
      # Homebrew doesn't link ImageMagick 6 by default, so make sure
      # pkgconfig can find it.
      export PKG_CONFIG_PATH="$PKG_CONFIG_PATH$PATH_SEPARATOR`$BREW --prefix imagemagick@6 2>/dev/null`/lib/pkgconfig"
    fi

    EMACS_CHECK_MODULES([IMAGEMAGICK], [MagickWand >= 7])
    if test $HAVE_IMAGEMAGICK = yes; then
       AC_DEFINE([HAVE_IMAGEMAGICK7], [1],
	 [Define to 1 if using ImageMagick7.])
    else
       ## 6.3.5 is the earliest version known to work; see Bug#17339.
       ## 6.8.2 makes Emacs crash; see Bug#13867.
       EMACS_CHECK_MODULES([IMAGEMAGICK], [Wand >= 6.3.5 Wand != 6.8.2])
    fi

    if test $HAVE_IMAGEMAGICK = yes; then
      OLD_CFLAGS=$CFLAGS
      OLD_LIBS=$LIBS
      CFLAGS="$CFLAGS $IMAGEMAGICK_CFLAGS"
      LIBS="$IMAGEMAGICK_LIBS $LIBS"
      if test "$REALLY_ANDROID" != "yes"; then
	AC_CHECK_FUNCS([MagickRelinquishMemory MagickExportImagePixels \
			MagickMergeImageLayers MagickAutoOrientImage])
      else
        # AC_CHECK_FUNCS doesn't work for Android dependencies because
	# they are built alongside Emacs.
	AC_CHECK_DECLS([MagickRelinquishMemory,MagickExportImagePixels,
MagickMergeImageLayers,MagickAutoOrientImage],
		       [], [], [#include <MagickWand/MagickWand.h>])
      fi
      CFLAGS=$OLD_CFLAGS
      LIBS=$OLD_LIBS
      # Check that ImageMagick links.  It does not link on Fedora 25
      # with './configure CC=clang', as pkg-config outputs flags like
      # -lomp that work for GCC but not Clang.
      if test "$ac_cv_func_MagickRelinquishMemory" != yes \
         && test "$REALLY_ANDROID" != "yes"; then
	HAVE_IMAGEMAGICK=no
      fi
    fi
    if test $HAVE_IMAGEMAGICK = yes; then
      AC_DEFINE([HAVE_IMAGEMAGICK], [1], [Define to 1 if using ImageMagick.])
    else
      if test "${with_imagemagick}" != "no"; then
        AC_MSG_ERROR([ImageMagick wanted, but it does not compile.  Maybe some library files are missing?]);
      fi
      IMAGEMAGICK_CFLAGS=
      IMAGEMAGICK_LIBS=
    fi
    AC_SUBST([IMAGEMAGICK_CFLAGS])
    AC_SUBST([IMAGEMAGICK_LIBS])
  fi
fi

AC_CHECK_LIB([anl], [getaddrinfo_a], [HAVE_GETADDRINFO_A=yes])
if test "${HAVE_GETADDRINFO_A}" = "yes"; then
  AC_DEFINE([HAVE_GETADDRINFO_A], [1],
[Define to 1 if you have getaddrinfo_a for asynchronous DNS resolution.])
  GETADDRINFO_A_LIBS="-lanl"
  AC_SUBST([GETADDRINFO_A_LIBS])
fi

HAVE_GTK=no
GTK_OBJ=
gtk_term_header=$term_header
check_gtk2=no
gtk3_pkg_errors=
if test "${opsys}" != "mingw32"; then
  if test "${with_gtk3}" = "yes" || test "${with_gtk}" = "yes" || test "$USE_X_TOOLKIT" = "maybe"; then
    GLIB_REQUIRED=2.37.5
    if test "${window_system}" = "x11"; then
      GTK_REQUIRED=3.10
    else
      GTK_REQUIRED=3.22.23
    fi
    GTK_MODULES="gtk+-3.0 >= $GTK_REQUIRED glib-2.0 >= $GLIB_REQUIRED"

    dnl Checks for libraries.
    EMACS_CHECK_MODULES([GTK], [$GTK_MODULES],
      [pkg_check_gtk=yes], [pkg_check_gtk=no])
    if test "$pkg_check_gtk" = "no" && test "$with_gtk3" = "yes"; then
       AC_MSG_ERROR([$GTK_PKG_ERRORS])
    fi
    if test "$pkg_check_gtk" = "yes"; then
       AC_DEFINE([HAVE_GTK3], [1], [Define to 1 if using GTK 3 or later.])
       GTK_OBJ=emacsgtkfixed.o
       gtk_term_header=gtkutil.h
       USE_GTK_TOOLKIT="GTK3"
       if test "x$ac_enable_gtk_deprecation_warnings" = x; then
	 AC_DEFINE([GDK_DISABLE_DEPRECATION_WARNINGS], [1],
	   [Define to 1 to disable GTK+/GDK deprecation warnings.])
	 AC_DEFINE([GLIB_DISABLE_DEPRECATION_WARNINGS], [1],
	   [Define to 1 to disable Glib deprecation warnings.])
       fi
    else
       check_gtk2=yes
       gtk3_pkg_errors="$GTK_PKG_ERRORS "
    fi
  fi

  if test "${with_gtk2}" = "yes" || test "$check_gtk2" = "yes"; then
    GLIB_REQUIRED=2.28
    GTK_REQUIRED=2.24
    GTK_MODULES="gtk+-2.0 >= $GTK_REQUIRED glib-2.0 >= $GLIB_REQUIRED"

    dnl Checks for libraries.
    EMACS_CHECK_MODULES([GTK], [$GTK_MODULES],
      [pkg_check_gtk=yes], [pkg_check_gtk=no])
    if test "$pkg_check_gtk" = "no" &&
       { test "$with_gtk" = yes || test "$with_gtk2" = "yes"; }
    then
      AC_MSG_ERROR([$gtk3_pkg_errors$GTK_PKG_ERRORS])
    fi
    test "$pkg_check_gtk" = "yes" && USE_GTK_TOOLKIT="GTK2"
  fi
fi

OLD_CFLAGS=$CFLAGS
OLD_LIBS=$LIBS

if test x"$pkg_check_gtk" = xyes; then

  AC_SUBST([GTK_LIBS])
  CFLAGS="$CFLAGS $GTK_CFLAGS"
  LIBS="$GTK_LIBS $LIBS"
  dnl Try to compile a simple GTK program.
  AC_CACHE_CHECK([whether GTK compiles], [emacs_cv_gtk_compiles],
  [AC_LINK_IFELSE(
    [AC_LANG_PROGRAM(
       [[/* Check the Gtk and Glib APIs.  */
	 #include <gtk/gtk.h>
	 #include <glib-object.h>
	 static void
	 callback (GObject *go, GParamSpec *spec, gpointer user_data)
	 {}
       ]],
       [[
	 GtkSettings *gs = 0;
	 /* Use G_CALLBACK to make sure function pointers can be cast to void *;
	    strict C prohibits this.  Use gtk_main_iteration to test that the
	    libraries are there.  */
	 if (g_signal_handler_find (G_OBJECT (gs), G_SIGNAL_MATCH_FUNC,
				    0, 0, 0, G_CALLBACK (callback), 0))
	   gtk_main_iteration ();
       ]])],
    [emacs_cv_gtk_compiles=yes], [emacs_cv_gtk_compiles=no])])
  if test "${emacs_cv_gtk_compiles}" != "yes"; then
    GTK_OBJ=
    if test "$USE_X_TOOLKIT" != "maybe"; then
      AC_MSG_ERROR([Gtk+ wanted, but it does not compile, see config.log.  Maybe some x11-devel files missing?]);
    fi
  else
    C_SWITCH_X_SITE="$C_SWITCH_X_SITE $GTK_CFLAGS"
    HAVE_GTK=yes
    AC_DEFINE([USE_GTK], [1], [Define to 1 if using GTK.])
    GTK_OBJ="gtkutil.o $GTK_OBJ"
    term_header=$gtk_term_header
    USE_X_TOOLKIT=none
    AC_MSG_WARN([[Your version of Gtk+ will have problems with
       closing open displays.  This is no problem if you just use
       one display, but if you use more than one and close one of them
       Emacs may crash.
       See https://gitlab.gnome.org/GNOME/gtk/issues/221]])
  fi

fi
AC_SUBST([GTK_OBJ])


if test "${HAVE_GTK}" = "yes"; then

  dnl  GTK scrollbars resemble toolkit scrollbars a lot, so to avoid
  dnl  a lot if #ifdef:s, say we have toolkit scrollbars.
  if test "$with_toolkit_scroll_bars" != no; then
    with_toolkit_scroll_bars=yes
  fi

  term_header=gtkutil.h

  if test "${USE_GTK_TOOLKIT}" = GTK2; then

    dnl  Check if we have the old file selection dialog declared and
    dnl  in the link library.  In 2.x it may be in the library,
    dnl  but not declared if deprecated featured has been selected out.
    dnl  AC_CHECK_DECL checks for a macro, so check for GTK_TYPE_FILE_SELECTION.
    HAVE_GTK_FILE_SELECTION=no
    AC_CHECK_DECL([GTK_TYPE_FILE_SELECTION],
		  [HAVE_GTK_FILE_SELECTION=yes],
		  [HAVE_GTK_FILE_SELECTION=no],
		  [AC_INCLUDES_DEFAULT
#include <gtk/gtk.h>])
    if test "$HAVE_GTK_FILE_SELECTION" = yes; then
      AC_CHECK_FUNCS([gtk_file_selection_new])
    fi

    dnl This procedure causes a bug on certain Ubuntu GTK+2 builds
    AC_CHECK_FUNCS([gtk_window_set_has_resize_grip])
  fi
fi

CFLAGS=$OLD_CFLAGS
LIBS=$OLD_LIBS

PGTK_OBJ=
PGTK_LIBS=
if test "$window_system" = "pgtk"; then
  PGTK_OBJ="pgtkfns.o pgtkterm.o pgtkselect.o pgtkmenu.o pgtkim.o xsettings.o"
  PGTK_LIBS="$GTK_LIBS"
fi
AC_SUBST([PGTK_OBJ])
AC_SUBST([PGTK_LIBS])

AC_CHECK_FUNCS([malloc_trim])

dnl D-Bus has been tested under GNU/Linux only.  Must be adapted for
dnl other platforms.
HAVE_DBUS=no
DBUS_OBJ=
if test "${with_dbus}" != "no" ; then
   EMACS_CHECK_MODULES([DBUS], [dbus-1 >= 1.0], [HAVE_DBUS=yes], [HAVE_DBUS=no])
   if test "$HAVE_DBUS" = yes; then
     AC_DEFINE([HAVE_DBUS], [1], [Define to 1 if using D-Bus.])
     dnl dbus_watch_get_unix_fd has been introduced in D-Bus 1.1.1.
     dnl dbus_type_is_valid and dbus_validate_* have been introduced in
     dnl D-Bus 1.5.12.
     dnl dbus_message_set_allow_interactive_authorization was introduced
     dnl in D-Bus 1.8.10.
     OLD_LIBS=$LIBS
     LIBS="$LIBS $DBUS_LIBS"
     AC_CHECK_FUNCS([dbus_watch_get_unix_fd \
		    dbus_type_is_valid \
		    dbus_validate_bus_name \
                    dbus_validate_path \
		    dbus_validate_interface \
		    dbus_validate_member \
                    dbus_message_set_allow_interactive_authorization])
     LIBS=$OLD_LIBS
     DBUS_OBJ=dbusbind.o
   fi
fi
AC_SUBST([DBUS_CFLAGS])
AC_SUBST([DBUS_LIBS])
AC_SUBST([DBUS_OBJ])

dnl GSettings has been tested under GNU/Linux only.
HAVE_GSETTINGS=no
if test "${HAVE_X11}" = "yes" -o "${window_system}" = "pgtk" && test "${with_gsettings}" = "yes"; then
   EMACS_CHECK_MODULES([GSETTINGS], [gio-2.0 >= 2.26])
   if test "$HAVE_GSETTINGS" = "yes"; then
      old_CFLAGS=$CFLAGS
      CFLAGS="$CFLAGS $GSETTINGS_CFLAGS"
      old_LIBS=$LIBS
      LIBS="$LIBS $GSETTINGS_LIBS"
      AC_CACHE_CHECK([whether GSettings is in gio], [emacs_cv_gsettings_in_gio],
      [AC_LINK_IFELSE(
         [AC_LANG_PROGRAM(
	     [[/* Check that gsettings really is present.  */
	     #include <glib-object.h>
	     #include <gio/gio.h>
	     ]],
	     [[
	       GSettings *settings;
	       GVariant *val = g_settings_get_value (settings, "");
	     ]])],
       [emacs_cv_gsettings_in_gio=yes], [emacs_cv_gsettings_in_gio=no])])

      if test "$emacs_cv_gsettings_in_gio" = "yes"; then
	AC_DEFINE([HAVE_GSETTINGS], [1], [Define to 1 if using GSettings.])
	SETTINGS_CFLAGS="$GSETTINGS_CFLAGS"
	SETTINGS_LIBS="$GSETTINGS_LIBS"
	test "$with_gconf" = "yes" || with_gconf=no
      fi
      CFLAGS=$old_CFLAGS
      LIBS=$old_LIBS
   fi
fi
AC_SUBST([HAVE_GSETTINGS])

dnl GConf has been tested under GNU/Linux only.
dnl The version is really arbitrary, it is about the same age as Gtk+ 2.6.
HAVE_GCONF=no
if test "${HAVE_X11}" = "yes" -o "${window_system}" = "pgtk" && test "${with_gconf}" != "no"; then
   EMACS_CHECK_MODULES([GCONF], [gconf-2.0 >= 2.13])
   if test "$HAVE_GCONF" = yes; then
      AC_DEFINE([HAVE_GCONF], [1], [Define to 1 if using GConf.])
      dnl Newer GConf doesn't link with g_objects, so this is not defined.
      SETTINGS_CFLAGS="$SETTINGS_CFLAGS $GCONF_CFLAGS"
      SETTINGS_LIBS="$SETTINGS_LIBS $GCONF_LIBS"
   fi
fi

if test "$HAVE_GSETTINGS" = "yes" || test "$HAVE_GCONF" = "yes"; then
    EMACS_CHECK_MODULES([GOBJECT], [gobject-2.0 >= 2.0])
    if test "$HAVE_GOBJECT" = "yes"; then
       SETTINGS_CFLAGS="$SETTINGS_CFLAGS $GOBJECT_CFLAGS"
       SETTINGS_LIBS="$SETTINGS_LIBS $GOBJECT_LIBS"
    fi
    SAVE_CFLAGS="$CFLAGS"
    SAVE_LIBS="$LIBS"
    CFLAGS="$SETTINGS_CFLAGS $CFLAGS"
    LIBS="$SETTINGS_LIBS $LIBS"
    CFLAGS="$SAVE_CFLAGS"
    LIBS="$SAVE_LIBS"
fi
AC_SUBST([SETTINGS_CFLAGS])
AC_SUBST([SETTINGS_LIBS])

USE_STARTUP_NOTIFICATION=no
if test "${HAVE_GTK}" = "yes"; then
    USE_STARTUP_NOTIFICATION=yes
fi
AC_SUBST([USE_STARTUP_NOTIFICATION])

HAVE_GNUTLS=no
if test "${with_gnutls}" != "no" ; then
  EMACS_CHECK_MODULES([LIBGNUTLS], [gnutls >= 2.12.2],
    [HAVE_GNUTLS=yes], [HAVE_GNUTLS=no])
  if test "${HAVE_GNUTLS}" = "yes"; then
    AC_DEFINE([HAVE_GNUTLS], [1], [Define if using GnuTLS.])
  fi

  # Windows loads GnuTLS dynamically
  if test "${opsys}" = "mingw32"; then
    LIBGNUTLS_LIBS=
  fi
fi

AC_SUBST([LIBGNUTLS_LIBS])
AC_SUBST([LIBGNUTLS_CFLAGS])

HAVE_LIBSYSTEMD=no
if test "${with_libsystemd}" = "yes" ; then
  dnl This code has been tested with libsystemd 222 and later.
  dnl FIXME: Find the earliest version number for which Emacs should work,
  dnl and change '222' to that number.
  EMACS_CHECK_MODULES([LIBSYSTEMD], [libsystemd >= 222],
    [HAVE_LIBSYSTEMD=yes], [HAVE_LIBSYSTEMD=no])
  if test "${HAVE_LIBSYSTEMD}" = "yes"; then
    AC_DEFINE([HAVE_LIBSYSTEMD], [1], [Define if using libsystemd.])
  fi
fi

AC_SUBST([LIBSYSTEMD_LIBS])
AC_SUBST([LIBSYSTEMD_CFLAGS])

HAVE_TREE_SITTER=no
TREE_SITTER_OBJ=
NEED_DYNLIB=no

if test "${with_tree_sitter}" != "no"; then
   dnl Tree-sitter 0.20.2 added support to change the malloc it uses
   dnl at runtime, we need that feature.  However, tree-sitter's
   dnl Makefile has problems, until that's fixed, all tree-sitter
   dnl libraries distributed are versioned 0.6.3.  We try to
   dnl accept a tree-sitter library that has incorrect version as long
   dnl as it supports changing malloc.
  EMACS_CHECK_MODULES([TREE_SITTER], [tree-sitter >= 0.20.2],
    [HAVE_TREE_SITTER=yes], [HAVE_TREE_SITTER=no])
  if test "${HAVE_TREE_SITTER}" = yes; then
    AC_DEFINE(HAVE_TREE_SITTER, 1, [Define if using tree-sitter.])
    NEED_DYNLIB=yes
  else
    EMACS_CHECK_MODULES([TREE_SITTER], [tree-sitter >= 0.6.3],
      [HAVE_TREE_SITTER=yes], [HAVE_TREE_SITTER=no])
    if test "${HAVE_TREE_SITTER}" = yes; then
      OLD_CFLAGS=$CFLAGS
      OLD_LIBS=$LIBS
      CFLAGS="$CFLAGS $TREE_SITTER_CFLAGS"
      LIBS="$TREE_SITTER_LIBS $LIBS"
      AC_CHECK_FUNCS([ts_set_allocator])
      CFLAGS=$OLD_CFLAGS
      LIBS=$OLD_LIBS
      if test "$ac_cv_func_ts_set_allocator" = yes; then
        AC_DEFINE(HAVE_TREE_SITTER, 1, [Define if using tree-sitter.])
	NEED_DYNLIB=yes
      else
        AC_MSG_ERROR([Tree-sitter library exists but its version is too old]);
        TREE_SITTER_CFLAGS=
        TREE_SITTER_LIBS=
      fi
    fi
  fi

  dnl Now we check if ts_tree_cursor_goto_previous_sibling exists. This
  dnl function is added in v0.20.10.
  if test "${HAVE_TREE_SITTER}" = yes; then
    OLD_CFLAGS=$CFLAGS
    OLD_LIBS=$LIBS
    CFLAGS="$CFLAGS $TREE_SITTER_CFLAGS"
    LIBS="$TREE_SITTER_LIBS $LIBS"
    AC_CHECK_FUNCS([ts_tree_cursor_goto_previous_sibling])
    CFLAGS=$OLD_CFLAGS
    LIBS=$OLD_LIBS
  fi

  # Windows loads tree-sitter dynamically
  if test "${opsys}" = "mingw32"; then
    TREE_SITTER_LIBS=
  fi
fi

AC_SUBST(TREE_SITTER_LIBS)
AC_SUBST(TREE_SITTER_CFLAGS)

NOTIFY_OBJ=
NOTIFY_SUMMARY=no

dnl MS Windows native file monitor is available for mingw32 only.
case $with_file_notification,$opsys in
  w32,cygwin)
    AC_MSG_ERROR(['--with-file-notification=w32' was specified, but
    this is only supported on MS-Windows native and MinGW32 builds.
    Consider using gfile instead.])
    ;;
  w32,* | yes,mingw32)
    AC_CHECK_HEADER([windows.h])
    if test "$ac_cv_header_windows_h" = yes ; then
       AC_DEFINE([HAVE_W32NOTIFY], [1], [Define to 1 to use w32notify.])
       NOTIFY_OBJ=w32notify.o
       NOTIFY_SUMMARY="yes (w32)"
    fi ;;
esac

dnl inotify is available only on Linux-kernel based systems.
case $with_file_notification,$NOTIFY_OBJ in
  inotify, | yes,)
    AC_CHECK_HEADER([sys/inotify.h])
    if test "$ac_cv_header_sys_inotify_h" = yes ; then
	AC_CHECK_FUNCS([inotify_init inotify_init1])
	if test "$ac_cv_func_inotify_init" = yes; then
	  AC_DEFINE([HAVE_INOTIFY], [1], [Define to 1 to use inotify.])
	  NOTIFY_OBJ=inotify.o
	  NOTIFY_SUMMARY="yes (inotify)"
       fi
    fi ;;
esac

AS_IF([test "$opsys" != "haiku"], [
 dnl kqueue is available on BSD-like systems and Haiku, but Haiku's
 dnl implementation cannot monitor filesystem activity.
 case $with_file_notification,$NOTIFY_OBJ in
   kqueue,* | yes,)
     EMACS_CHECK_MODULES([KQUEUE], [libkqueue])
     if test "$HAVE_KQUEUE" = "yes"; then
	AC_DEFINE([HAVE_KQUEUE], [1], [Define to 1 to use kqueue.])
	CPPFLAGS="$CPPFLAGS -I/usr/include/kqueue"
	NOTIFY_CFLAGS=$KQUEUE_CFLAGS
	NOTIFY_LIBS=$KQUEUE_LIBS
	NOTIFY_OBJ=kqueue.o
	NOTIFY_SUMMARY="yes -lkqueue"
     else
	AC_SEARCH_LIBS([kqueue], [])
	if test "$ac_cv_search_kqueue" != no; then
	  AC_DEFINE([HAVE_KQUEUE], [1], [Define to 1 to use kqueue.])
	  NOTIFY_OBJ=kqueue.o
	  NOTIFY_SUMMARY="yes (kqueue)"
	fi
     fi ;;
 esac])

dnl g_file_monitor exists since glib 2.18.  G_FILE_MONITOR_EVENT_MOVED
dnl has been added in glib 2.24.  It has been tested under
dnl GNU/Linux only.
case $with_file_notification,$NOTIFY_OBJ in
  gfile,* | yes,)
    if test "${HAVE_NS}" = yes; then
       AC_MSG_ERROR(['--with-file-notification=gfile' is not supported in NextStep builds.
Consider kqueue instead.])
    else
       EMACS_CHECK_MODULES([GFILENOTIFY], [gio-2.0 >= 2.24])
       if test "$HAVE_GFILENOTIFY" = "yes"; then
	  AC_DEFINE([HAVE_GFILENOTIFY], [1], [Define to 1 if using GFile.])
	  NOTIFY_CFLAGS=$GFILENOTIFY_CFLAGS
	  NOTIFY_LIBS=$GFILENOTIFY_LIBS
	  NOTIFY_OBJ=gfilenotify.o
	  NOTIFY_SUMMARY="yes -lgio (gfile)"
       fi
    fi ;;
esac

case $with_file_notification,$NOTIFY_OBJ in
  yes,* | no,* | *,?*) ;;
  *) AC_MSG_ERROR([File notification '$with_file_notification' requested but requirements not found.]) ;;
esac

if test -n "$NOTIFY_OBJ"; then
   AC_DEFINE([USE_FILE_NOTIFY], [1],
     [Define to 1 if using file notifications.])
fi
AC_SUBST([NOTIFY_CFLAGS])
AC_SUBST([NOTIFY_LIBS])
AC_SUBST([NOTIFY_OBJ])

dnl Do not put whitespace before the #include statements below.
dnl Older compilers (eg sunos4 cc) choke on it.
HAVE_XAW3D=no
LUCID_LIBW=
if test x"${USE_X_TOOLKIT}" = xmaybe || test x"${USE_X_TOOLKIT}" = xLUCID; then
  if test "$with_xaw3d" != no; then
    AC_CACHE_VAL([emacs_cv_xaw3d],
    [AC_LINK_IFELSE([AC_LANG_PROGRAM([[
#include <X11/Intrinsic.h>
#include <X11/Xaw3d/Simple.h>]],
      [[]])],
      [AC_CHECK_LIB([Xaw3d], [XawScrollbarSetThumb],
		    [emacs_cv_xaw3d=yes],
		    [emacs_cv_xaw3d=no])],
      [emacs_cv_xaw3d=no])])
  else
    emacs_cv_xaw3d=no
  fi
  if test $emacs_cv_xaw3d = yes; then
    AC_MSG_CHECKING([for xaw3d])
    AC_MSG_RESULT([yes; using Lucid toolkit])
    USE_X_TOOLKIT=LUCID
    HAVE_XAW3D=yes
    LUCID_LIBW=-lXaw3d
    AC_DEFINE([HAVE_XAW3D], [1],
              [Define to 1 if you have the Xaw3d library (-lXaw3d).])
  else
    AC_MSG_CHECKING([for xaw3d])
    AC_MSG_RESULT([no])
    AC_MSG_CHECKING([for libXaw])
    AC_CACHE_VAL([emacs_cv_xaw],
    [AC_LINK_IFELSE([AC_LANG_PROGRAM([[
#include <X11/Intrinsic.h>
#include <X11/Xaw/Simple.h>]],
      [[]])],
      [emacs_cv_xaw=yes],
      [emacs_cv_xaw=no])])
    if test $emacs_cv_xaw = yes; then
      AC_MSG_RESULT([yes; using Lucid toolkit])
      USE_X_TOOLKIT=LUCID
      LUCID_LIBW=-lXaw
    elif test x"${USE_X_TOOLKIT}" = xLUCID; then
      AC_MSG_ERROR([Lucid toolkit requires X11/Xaw include files])
    else
      AC_MSG_ERROR([No X toolkit could be found.
If you are sure you want Emacs compiled without an X toolkit, pass
  --with-x-toolkit=no
to configure.  Otherwise, install the development libraries for the toolkit
that you want to use (e.g. Gtk+) and re-run configure.])
    fi
  fi
fi

X_TOOLKIT_TYPE=$USE_X_TOOLKIT

LIBXTR6=
LIBXMU=
if test "${USE_X_TOOLKIT}" != "none"; then
  AC_MSG_CHECKING([X11 toolkit version])
  AC_CACHE_VAL([emacs_cv_x11_toolkit_version_6],
  [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <X11/Intrinsic.h>]],
[[#if XtSpecificationRelease < 6
fail;
#endif
]])], [emacs_cv_x11_toolkit_version_6=yes],
      [emacs_cv_x11_toolkit_version_6=no])])
  HAVE_X11XTR6=$emacs_cv_x11_toolkit_version_6
  if test $emacs_cv_x11_toolkit_version_6 = yes; then
    AC_MSG_RESULT([6 or newer])
    AC_DEFINE([HAVE_X11XTR6], [1],
	      [Define to 1 if you have the X11R6 or newer version of Xt.])
    LIBXTR6="-lSM -lICE"
    case "$opsys" in
      ## Use libw.a along with X11R6 Xt.
      unixware) LIBXTR6="$LIBXTR6 -lw" ;;
    esac
  else
    AC_MSG_RESULT([before 6])
  fi

dnl If using toolkit, check whether libXmu.a exists.
dnl tranle@intellicorp.com says libXmu.a can need XtMalloc in libXt.a to link.
  OLDLIBS="$LIBS"
  if test x$HAVE_X11XTR6 = xyes; then
    OTHERLIBS='-lXt -lSM -lICE'
  else
    OTHERLIBS='-lXt'
  fi
  AC_SEARCH_LIBS([XmuConvertStandardSelection], [Xmu], [], [], [$OTHERLIBS])
  if test "X$LIBS" != "X$OLDLIBS"; then
    LIBXMU=$ac_cv_search_XmuConvertStandardSelection
  fi
  LIBS=$OLDLIBS
  dnl ac_cv_search_XmuConvertStandardSelection is also referenced below.
fi
AC_SUBST([LIBXTR6])
AC_SUBST([LIBXMU])

LIBXP=
if test "${USE_X_TOOLKIT}" = "MOTIF"; then
  # OpenMotif may be installed in such a way on some GNU/Linux systems.
  if test -d /usr/include/openmotif; then
    CPPFLAGS="-I/usr/include/openmotif $CPPFLAGS"
    emacs_cv_openmotif=yes
    case "$canonical" in
      x86_64-*-linux-gnu* | powerpc64-*-linux-gnu* | sparc64-*-linux-gnu*)
      test -d /usr/lib64/openmotif && LDFLAGS="-L/usr/lib64/openmotif $LDFLAGS"
      ;;
      *)
      test -d /usr/lib/openmotif && LDFLAGS="-L/usr/lib/openmotif $LDFLAGS"
    esac
  else
    emacs_cv_openmotif=no
  fi
  AC_CACHE_CHECK([for (Open)Motif version 2.1], [emacs_cv_motif_version_2_1],
  [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <Xm/Xm.h>]],
    [[#if XmVERSION > 2 || (XmVERSION == 2 && XmREVISION >= 1)
int x = 5;
#else
Motif version prior to 2.1.
#endif]])],
     [emacs_cv_motif_version_2_1=yes],
     [emacs_cv_motif_version_2_1=no])])
  if test $emacs_cv_motif_version_2_1 = yes; then
    AC_CHECK_LIB([Xp], [XpCreateContext], [LIBXP=-lXp])
    if test x$emacs_cv_openmotif = xyes; then
      REAL_CPPFLAGS="-I/usr/include/openmotif $REAL_CPPFLAGS"
    fi
  else
    # We put this in CFLAGS temporarily to precede other -I options
    # that might be in CFLAGS temporarily.
    # We put this in CPPFLAGS where it precedes the other -I options.
    OLD_CPPFLAGS=$CPPFLAGS
    OLD_CFLAGS=$CFLAGS
    CPPFLAGS="-I/usr/X11R6/LessTif/Motif1.2/include $CPPFLAGS"
    CFLAGS="-I/usr/X11R6/LessTif/Motif1.2/include $CFLAGS"
    AC_CACHE_CHECK([for LessTif where some systems put it], [emacs_cv_lesstif],
      [AC_COMPILE_IFELSE(
	 [AC_LANG_PROGRAM(
	    [[#include </usr/X11R6/LessTif/Motif1.2/include/Xm/Xm.h>
	    ]],
	    [[int x = 5;]])],
	 [emacs_cv_lesstif=yes],
	 [emacs_cv_lesstif=no])])
    if test $emacs_cv_lesstif = yes; then
      # Make sure this -I option remains in CPPFLAGS after it is set
      # back to REAL_CPPFLAGS.
      # There is no need to change REAL_CFLAGS, because REAL_CFLAGS does not
      # have those other -I options anyway.  Ultimately, having this
      # directory ultimately in CPPFLAGS will be enough.
      REAL_CPPFLAGS="-I/usr/X11R6/LessTif/Motif1.2/include $REAL_CPPFLAGS"
      LDFLAGS="-L/usr/X11R6/LessTif/Motif1.2/lib $LDFLAGS"
    else
      CFLAGS=$OLD_CFLAGS
      CPPFLAGS=$OLD_CPPFLAGS
    fi
  fi
  AC_CHECK_HEADER([Xm/BulletinB.h], [],
    [AC_MSG_ERROR([Motif toolkit requested but requirements not found.])])
fi

dnl Use toolkit scroll bars if configured for GTK or X toolkit and either
dnl using Motif or Xaw3d is available, and unless
dnl --with-toolkit-scroll-bars=no was specified.

AH_TEMPLATE([USE_TOOLKIT_SCROLL_BARS],
	    [Define to 1 if we should use toolkit scroll bars.])dnl
USE_TOOLKIT_SCROLL_BARS=no
if test "${with_toolkit_scroll_bars}" != "no"; then
  if test "${USE_X_TOOLKIT}" != "none"; then
    if test "${USE_X_TOOLKIT}" = "MOTIF"; then
      AC_DEFINE([USE_TOOLKIT_SCROLL_BARS])
      HAVE_XAW3D=no
      USE_TOOLKIT_SCROLL_BARS=yes
    elif test "${HAVE_XAW3D}" = "yes" || test "${USE_X_TOOLKIT}" = "LUCID"; then
      AC_DEFINE([USE_TOOLKIT_SCROLL_BARS])
      USE_TOOLKIT_SCROLL_BARS=yes
    fi
  elif test "${HAVE_GTK}" = "yes"; then
    AC_DEFINE([USE_TOOLKIT_SCROLL_BARS])
    USE_TOOLKIT_SCROLL_BARS=yes
  elif test "${HAVE_NS}" = "yes"; then
    AC_DEFINE([USE_TOOLKIT_SCROLL_BARS])
    USE_TOOLKIT_SCROLL_BARS=yes
  elif test "${HAVE_W32}" = "yes"; then
    AC_DEFINE([USE_TOOLKIT_SCROLL_BARS])
    USE_TOOLKIT_SCROLL_BARS=yes
  elif test "${HAVE_BE_APP}" = "yes"; then
    AC_DEFINE([USE_TOOLKIT_SCROLL_BARS])
    USE_TOOLKIT_SCROLL_BARS=yes
  fi
elif test "${window_system}" != "x11" && test "${window_system}" != "none"; then
  AC_MSG_ERROR([Non-toolkit scroll bars are not implemented for your system])
fi

dnl See if XIM is available.
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
	  #include <X11/Xlib.h>
	  #include <X11/Xresource.h>]],
	 [[XIMProc  callback;]])],
	 [HAVE_XIM=yes
	 AC_DEFINE([HAVE_XIM], [1], [Define to 1 if XIM is available])],
	 [HAVE_XIM=no])

dnl Note this is non-standard.  --with-xim does not control whether
dnl XIM support is compiled in, it only affects the runtime default of
dnl use_xim in xterm.c.
if test "${with_xim}" != "no"; then
  AC_DEFINE([USE_XIM], [1],
	    [Define to 1 to default runtime use of XIM to on.])
fi

# Check for XRender
HAVE_XRENDER=no
if test "${HAVE_X11}" = "yes"; then
  AC_COMPILE_IFELSE(
    [AC_LANG_PROGRAM(
       [[#include <X11/Intrinsic.h>
	 #include <X11/extensions/Xrender.h>
       ]],
       [[return !XRenderQueryExtension;]])],
    [AC_CHECK_LIB([Xrender], [XRenderQueryExtension], [HAVE_XRENDER=yes])])
  if test $HAVE_XRENDER = yes; then
    XRENDER_LIBS="-lXrender"
    AC_SUBST([XRENDER_LIBS])
    AC_DEFINE([HAVE_XRENDER], [1], [Define to 1 if XRender is available.])
  fi
fi

HAVE_CAIRO=no
if test "${HAVE_X11}" = "yes"; then
  if test "${with_cairo}" != "no"; then
    CAIRO_REQUIRED=1.8.0
    CAIRO_MODULE="cairo >= $CAIRO_REQUIRED"
    EMACS_CHECK_MODULES([CAIRO], [$CAIRO_MODULE])
    if test $HAVE_CAIRO = yes; then
      AS_IF([test "x$with_cairo_xcb" = "xyes"], [
	CAIRO_XCB_MODULE="cairo-xcb >= $CAIRO_REQUIRED"
	EMACS_CHECK_MODULES([CAIRO_XCB], [$CAIRO_XCB_MODULE])
	AS_IF([test "x$HAVE_CAIRO_XCB" = "xyes"], [
	  CAIRO_CFLAGS="$CAIRO_CFLAGS $CAIRO_XCB_CFLAGS"
	  CAIRO_LIBS="$CAIRO_LIBS $CAIRO_XCB_LIBS"
	  AC_DEFINE([USE_CAIRO_XCB], [1],
	    [Define to 1 if cairo XCB surfaces are available.])])])
      AC_DEFINE([USE_CAIRO], [1], [Define to 1 if using cairo.])
      CFLAGS="$CFLAGS $CAIRO_CFLAGS"
      LIBS="$LIBS $CAIRO_LIBS"
      AC_SUBST([CAIRO_CFLAGS])
      AC_SUBST([CAIRO_LIBS])
    else
      AC_MSG_WARN([cairo requested but not found.])
    fi
  fi
fi

dnl Enable xwidgets if GTK3 and WebKitGTK+ are available.
dnl Enable xwidgets if macOS Cocoa and WebKit framework are available.
HAVE_XWIDGETS=no
XWIDGETS_OBJ=
if test "$with_xwidgets" != "no"; then
  if test "$USE_GTK_TOOLKIT" = "GTK3" && test "$window_system" != "none"; then
    WEBKIT_REQUIRED=2.12
    WEBKIT_MODULES="webkit2gtk-4.1 >= $WEBKIT_REQUIRED"
    EMACS_CHECK_MODULES([WEBKIT], [$WEBKIT_MODULES])
    if test "$HAVE_WEBKIT" = "no"; then
      WEBKIT_MODULES="webkit2gtk-4.0 >= $WEBKIT_REQUIRED"
      EMACS_CHECK_MODULES([WEBKIT], [$WEBKIT_MODULES])
    fi
    HAVE_XWIDGETS=$HAVE_WEBKIT
    XWIDGETS_OBJ="xwidget.o"
    if test "$HAVE_X_WINDOWS" = "yes" && test "${with_cairo}" = "no"; then
      CAIRO_XLIB_MODULES="cairo >= 1.8.0 cairo-xlib >= 1.8.0"
      EMACS_CHECK_MODULES([CAIRO_XLIB], [$CAIRO_XLIB_MODULES])
      if test $HAVE_CAIRO_XLIB = "yes"; then
        CAIRO_CFLAGS="$CAIRO_XLIB_CFLAGS"
	CAIRO_LIBS="$CAIRO_XLIB_LIBS"
	AC_SUBST([CAIRO_CFLAGS])
	AC_SUBST([CAIRO_LIBS])
      else
        AC_MSG_ERROR([xwidgets requested, but a suitable cairo installation wasn't found])
      fi
    fi
  elif test "${NS_IMPL_COCOA}" = "yes"; then
    dnl FIXME: Check framework WebKit2
    dnl WEBKIT_REQUIRED=M.m.p
    WEBKIT_LIBS="-Wl,-framework -Wl,WebKit"
    WEBKIT_HEADERS="/System/Library/Frameworks/WebKit.framework/Headers"
    if test -z "$xcsdkdir" -a -n "$XCRUN" -a ! -d "${WEBKIT_HEADERS}"; then
      dnl WebKit headers not found.  Try Xcode SDK dir if it is sane.
      xcsdkdir=`$XCRUN --show-sdk-path 2>/dev/null`
      case $xcsdkdir in
	*[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
	xcsdkdir="" ;;
      esac
    fi
    WEBKIT_CFLAGS="-I${xcsdkdir}${WEBKIT_HEADERS}"
    HAVE_WEBKIT="yes"
    HAVE_XWIDGETS=$HAVE_WEBKIT
    XWIDGETS_OBJ="xwidget.o"
    NS_OBJC_OBJ="$NS_OBJC_OBJ nsxwidget.o"
    dnl Update NS_OBJC_OBJ with added nsxwidget.o
    AC_SUBST([NS_OBJC_OBJ])
  else
    AC_MSG_ERROR([xwidgets requested, it requires GTK3 as X window toolkit or macOS Cocoa as window system.])
  fi

  test $HAVE_XWIDGETS = yes ||
    AC_MSG_ERROR([xwidgets requested but WebKitGTK+ or WebKit framework not found.])

  AC_DEFINE([HAVE_XWIDGETS], [1], [Define to 1 if you have xwidgets support.])
fi
AC_SUBST([XWIDGETS_OBJ])

if test "$window_system" = "pgtk"; then
  CAIRO_REQUIRED=1.12.0
  CAIRO_MODULE="cairo >= $CAIRO_REQUIRED"
  EMACS_CHECK_MODULES([CAIRO], [$CAIRO_MODULE])
  if test $HAVE_CAIRO = yes; then
    AC_DEFINE([USE_CAIRO], [1], [Define to 1 if using cairo.])
  else
    AC_MSG_ERROR([cairo required but not found.])
  fi

  CFLAGS="$CFLAGS $CAIRO_CFLAGS"
  LIBS="$LIBS $CAIRO_LIBS"
  AC_SUBST([CAIRO_CFLAGS])
  AC_SUBST([CAIRO_LIBS])
fi

if test "${HAVE_BE_APP}" = "yes"; then
  if test "${with_be_cairo}" != "no"; then
    CAIRO_REQUIRED=1.8.0
    CAIRO_MODULE="cairo >= $CAIRO_REQUIRED"
    EMACS_CHECK_MODULES([CAIRO], [$CAIRO_MODULE])
    if test $HAVE_CAIRO = yes; then
      AC_DEFINE([USE_BE_CAIRO], [1], [Define to 1 if using cairo on Haiku.])
      CFLAGS="$CFLAGS $CAIRO_CFLAGS"
      LIBS="$LIBS $CAIRO_LIBS"
      AC_SUBST([CAIRO_CFLAGS])
      AC_SUBST([CAIRO_LIBS])
    else
      AC_MSG_WARN([cairo requested but not found.])
    fi
  fi
fi

### Start of font-backend (under any platform) section.
# (nothing here yet -- this is a placeholder)
### End of font-backend (under any platform) section.

### Start of font-backend (under X11) section.
is_xft_version_outdated=no
if test "${HAVE_X11}" = "yes"; then
  if test $HAVE_CAIRO = yes; then
    dnl Strict linkers fail with
    dnl ftfont.o: undefined reference to symbol 'FT_New_Face'
    dnl if -lfreetype is not specified.
    dnl The following is needed to set FREETYPE_LIBS.
    EMACS_CHECK_MODULES([FREETYPE], [freetype2])

    test "$HAVE_FREETYPE" = "no" && AC_MSG_ERROR([cairo requires libfreetype])

    EMACS_CHECK_MODULES([FONTCONFIG], [fontconfig >= 2.2.0])

    test "$HAVE_FONTCONFIG" = "no" &&
      AC_MSG_ERROR([cairo requires libfontconfig])
    dnl For the "Does Emacs use" message at the end.
    HAVE_XFT=no
  else
    ## Use -lXft if available, unless '--with-xft=no'.
    HAVE_XFT=maybe
    if test "x${with_x}" = "xno"; then
      with_xft="no";
    fi

    if test "$with_xft" != no; then
      EMACS_CHECK_MODULES([FONTCONFIG], [fontconfig >= 2.2.0])
      with_xft=$HAVE_FONTCONFIG
    fi

    if test "x${with_xft}" != "xno"; then

      EMACS_CHECK_MODULES([XFT], [xft >= 0.13.0], [], [HAVE_XFT=no])
      ## Because xterm.c uses XRenderQueryExtension when XFT is
      ## enabled, we also need to link to -lXrender.
      if test "$HAVE_XFT" != no && test "$HAVE_XRENDER" != no; then
	OLD_CPPFLAGS="$CPPFLAGS"
	OLD_CFLAGS="$CFLAGS"
	OLD_LIBS="$LIBS"
	CPPFLAGS="$CPPFLAGS $XFT_CFLAGS"
	CFLAGS="$CFLAGS $XFT_CFLAGS"
	LIBS="$XFT_LIBS $LIBS"
	AC_CHECK_HEADER([X11/Xft/Xft.h],
	  [AC_CHECK_LIB([Xft], [XftFontOpen], [HAVE_XFT=yes],
	     [], [$XFT_LIBS])],
	  [],
          [[#include <X11/X.h>]])

	if test "${HAVE_XFT}" = "yes"; then
	  AC_DEFINE([HAVE_XFT], [1], [Define to 1 if you have the Xft library.])
	  AC_SUBST([XFT_LIBS])
	  AC_CACHE_CHECK([whether libXft is not recent enough to support color fonts],
	    [emacs_cv_is_xft_version_outdated],
	    [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
	      [[
		#include <X11/Xlib.h>
	        #include <X11/Xft/Xft.h>
		#if XftVersion < 20306
		#error "Xft < 2.3.6"
		#endif /* XftVersion < 20306 */
	      ]], [])],
	      [emacs_cv_is_xft_version_outdated=no],
	      [emacs_cv_is_xft_version_outdated=yes])])
	  is_xft_version_outdated=$emacs_cv_is_xft_version_outdated
	  C_SWITCH_X_SITE="$C_SWITCH_X_SITE $XFT_CFLAGS"
	fi                        # "${HAVE_XFT}" = "yes"
	CPPFLAGS=$OLD_CPPFLAGS
	CFLAGS=$OLD_CFLAGS
	LIBS=$OLD_LIBS
      else
      # Make sure XFT is disabled if we found XFT but not XRender
	HAVE_XFT=no
      fi                          # "$HAVE_XFT" != no
    fi                            # "x${with_xft}" != "xno"

    if test "$HAVE_XFT" != "yes"; then
       dnl For the "Does Emacs use" message at the end.
       HAVE_XFT=no
       HAVE_FREETYPE=no
    else
       dnl Strict linkers fail with
       dnl ftfont.o: undefined reference to symbol 'FT_New_Face'
       dnl if -lfreetype is not specified.
       dnl The following is needed to set FREETYPE_LIBS.
       EMACS_CHECK_MODULES([FREETYPE], [freetype2])

       test "$HAVE_FREETYPE" = "no" &&
	 AC_MSG_ERROR([libxft requires libfreetype])
    fi
  fi				  # $HAVE_CAIRO != yes

  HAVE_LIBOTF=no
  if test "${HAVE_FREETYPE}" = "yes"; then
    AC_DEFINE([HAVE_FREETYPE], [1],
	      [Define to 1 if using the freetype and fontconfig libraries.])
    OLD_CFLAGS=$CFLAGS
    OLD_LIBS=$LIBS
    CFLAGS="$CFLAGS $FREETYPE_CFLAGS"
    LIBS="$FREETYPE_LIBS $LIBS"
    AC_CHECK_FUNCS([FT_Face_GetCharVariantIndex])
    CFLAGS=$OLD_CFLAGS
    LIBS=$OLD_LIBS
    if test "${with_libotf}" != "no"; then
      EMACS_CHECK_MODULES([LIBOTF], [libotf])
      if test "$HAVE_LIBOTF" = "yes"; then
	AC_DEFINE([HAVE_LIBOTF], [1], [Define to 1 if using libotf.])
	AC_CHECK_LIB([otf], [OTF_get_variation_glyphs],
		     [HAVE_OTF_GET_VARIATION_GLYPHS=yes],
		     [HAVE_OTF_GET_VARIATION_GLYPHS=no])
	if test "${HAVE_OTF_GET_VARIATION_GLYPHS}" = "yes"; then
	  AC_DEFINE([HAVE_OTF_GET_VARIATION_GLYPHS], [1],
		    [Define to 1 if libotf has OTF_get_variation_glyphs.])
	fi
	if $PKG_CONFIG --atleast-version=0.9.16 libotf; then :; else
	  AC_DEFINE([HAVE_OTF_KANNADA_BUG], [1],
[Define to 1 if libotf is affected by https://debbugs.gnu.org/28110.])
	fi
      fi
    fi
  dnl FIXME should there be an error if HAVE_FREETYPE != yes?
  dnl Does the new font backend require it, or can it work without it?
  fi

  HAVE_M17N_FLT=no
  if test "${HAVE_LIBOTF}" = yes; then
    if test "${with_m17n_flt}" != "no"; then
      EMACS_CHECK_MODULES([M17N_FLT], [m17n-flt])
      if test "$HAVE_M17N_FLT" = "yes"; then
	AC_DEFINE([HAVE_M17N_FLT], [1], [Define to 1 if using libm17n-flt.])
      fi
    fi
  fi
else # "${HAVE_X11}" != "yes"
  if test $window_system = pgtk; then
    EMACS_CHECK_MODULES([FONTCONFIG], [fontconfig >= 2.2.0])
    EMACS_CHECK_MODULES([FREETYPE], [freetype2])
    if test "$HAVE_FONTCONFIG" != yes -o "$HAVE_FREETYPE" != yes; then
      AC_MSG_ERROR([fontconfig and freetype is required.])
    fi
    HAVE_LIBOTF=no
    AC_DEFINE([HAVE_FREETYPE], [1],
	      [Define to 1 if using the freetype and fontconfig libraries.])
    if test "${with_libotf}" != "no"; then
      EMACS_CHECK_MODULES([LIBOTF], [libotf])
      if test "$HAVE_LIBOTF" = "yes"; then
	AC_DEFINE([HAVE_LIBOTF], [1], [Define to 1 if using libotf.])
	AC_CHECK_LIB([otf], [OTF_get_variation_glyphs],
		     [HAVE_OTF_GET_VARIATION_GLYPHS=yes],
		     [HAVE_OTF_GET_VARIATION_GLYPHS=no])
	if test "${HAVE_OTF_GET_VARIATION_GLYPHS}" = "yes"; then
	  AC_DEFINE([HAVE_OTF_GET_VARIATION_GLYPHS], [1],
		    [Define to 1 if libotf has OTF_get_variation_glyphs.])
	fi
      fi
    fi
  else
    HAVE_XFT=no
    HAVE_FREETYPE=no
    HAVE_LIBOTF=no
    HAVE_M17N_FLT=no
  fi
fi   # "${HAVE_X11}" != "yes"

HAVE_HARFBUZZ=no
### On MS-Windows we use hb_font_get_nominal_glyph, which appeared
### in HarfBuzz version 1.2.3
if test "${HAVE_W32}" = "yes"; then
  harfbuzz_required_ver=1.2.3
else
  harfbuzz_required_ver=0.9.42
fi
if test "${HAVE_X11}" = "yes" && test "${HAVE_FREETYPE}" = "yes" \
        || test "$window_system" = "pgtk" \
        || test "${HAVE_W32}" = "yes" \
	|| test "$REALLY_ANDROID" = "yes"; then
  if test "${with_harfbuzz}" != "no"; then
    EMACS_CHECK_MODULES([HARFBUZZ], [harfbuzz >= $harfbuzz_required_ver])
    AS_IF([test "$HAVE_HARFBUZZ" = "yes"],[
      AC_DEFINE([HAVE_HARFBUZZ], [1], [Define to 1 if using HarfBuzz.])
      ### mingw32 and Cygwin-w32 don't use -lharfbuzz, since they load
      ### the library dynamically.
      AS_IF([test "${HAVE_W32}" = "yes"], [HARFBUZZ_LIBS=])
      ## Now check for `hb_font_set_var_named_instance'.
      OLD_CFLAGS=$CFLAGS
      CFLAGS="$HARFBUZZ_CFLAGS $CFLAGS"
      EMACS_CHECK_LIB([harfbuzz], [hb_font_set_var_named_instance],
        [AC_DEFINE([HAVE_HB_FONT_SET_VAR_NAMED_INSTANCE], [1],
	  [Define to 1 if `hb_font_set_var_named_instance' is present.])],
	[], [$HARFBUZZ_LIBS], [#include <hb.h>])
      CFLAGS=$OLD_CFLAGS])
  fi
fi

### Start of font-backend (under Haiku) selectionn.
if test "${HAVE_BE_APP}" = "yes"; then
  if test $HAVE_CAIRO = "yes"; then
      EMACS_CHECK_MODULES([FREETYPE], [freetype2 >= 2.5.0])
      test "$HAVE_FREETYPE" = "no" &&
	AC_MSG_ERROR([cairo on Haiku requires libfreetype])
      EMACS_CHECK_MODULES([FONTCONFIG], [fontconfig >= 2.2.0])
      test "$HAVE_FONTCONFIG" = "no" &&
	AC_MSG_ERROR([cairo on Haiku requires libfontconfig])
  fi

  HAVE_LIBOTF=no

  if test "${HAVE_FREETYPE}" = "yes"; then
    AC_DEFINE([HAVE_FREETYPE], [1],
	      [Define to 1 if using the freetype and fontconfig libraries.])
    OLD_CFLAGS=$CFLAGS
    OLD_LIBS=$LIBS
    CFLAGS="$CFLAGS $FREETYPE_CFLAGS"
    LIBS="$FREETYPE_LIBS $LIBS"
    AC_CHECK_FUNCS([FT_Face_GetCharVariantIndex])
    CFLAGS=$OLD_CFLAGS
    LIBS=$OLD_LIBS
    if test "${with_libotf}" != "no"; then
      EMACS_CHECK_MODULES([LIBOTF], [libotf])
      if test "$HAVE_LIBOTF" = "yes"; then
	AC_DEFINE([HAVE_LIBOTF], [1], [Define to 1 if using libotf.])
	AC_CHECK_LIB([otf], [OTF_get_variation_glyphs],
		     [HAVE_OTF_GET_VARIATION_GLYPHS=yes],
		     [HAVE_OTF_GET_VARIATION_GLYPHS=no])
	if test "${HAVE_OTF_GET_VARIATION_GLYPHS}" = "yes"; then
	  AC_DEFINE([HAVE_OTF_GET_VARIATION_GLYPHS], [1],
		    [Define to 1 if libotf has OTF_get_variation_glyphs.])
	fi
	if $PKG_CONFIG --atleast-version=0.9.16 libotf; then :; else
	  AC_DEFINE([HAVE_OTF_KANNADA_BUG], [1],
[Define to 1 if libotf is affected by https://debbugs.gnu.org/28110.])
	fi
      fi
    fi
  dnl FIXME should there be an error if HAVE_FREETYPE != yes?
  dnl Does the new font backend require it, or can it work without it?
  fi
fi

if test "${HAVE_BE_APP}" = "yes" && test "${HAVE_FREETYPE}" = "yes"; then
  if test "${with_harfbuzz}" != "no"; then
    EMACS_CHECK_MODULES([HARFBUZZ], [harfbuzz >= $harfbuzz_required_ver])
    if test "$HAVE_HARFBUZZ" = "yes"; then
      AC_DEFINE([HAVE_HARFBUZZ], [1], [Define to 1 if using HarfBuzz.])
    fi
  fi
fi

### End of font-backend section.

AC_SUBST([FREETYPE_CFLAGS])
AC_SUBST([FREETYPE_LIBS])
AC_SUBST([FONTCONFIG_CFLAGS])
AC_SUBST([FONTCONFIG_LIBS])
AC_SUBST([HARFBUZZ_CFLAGS])
AC_SUBST([HARFBUZZ_LIBS])
AC_SUBST([LIBOTF_CFLAGS])
AC_SUBST([LIBOTF_LIBS])
AC_SUBST([M17N_FLT_CFLAGS])
AC_SUBST([M17N_FLT_LIBS])

XCB_LIBS=
if test "${HAVE_X11}" = "yes"; then
  AC_CHECK_HEADER([X11/Xlib-xcb.h],
    [AC_CHECK_LIB([xcb], [xcb_translate_coordinates], [HAVE_XCB=yes])])
  if test "${HAVE_XCB}" = "yes"; then
    AC_CHECK_LIB([X11-xcb], [XGetXCBConnection], [HAVE_X11_XCB=yes])
    if test "${HAVE_X11_XCB}" = "yes"; then
      AC_DEFINE([USE_XCB], [1],
[Define to 1 if you have the XCB library and X11-XCB library for mixed
X11/XCB programming.])
      XCB_LIBS="-lX11-xcb -lxcb"
    fi
  fi
fi
AC_SUBST([XCB_LIBS])

### Use -lXpm if available, unless '--with-xpm=no'.
### mingw32 doesn't use -lXpm, since it loads the library dynamically.
### The Cygwin-w32 build uses <noX/xpm.h> instead of <X11/xpm.h>, so
### we need to set LDFLAGS accordingly.
HAVE_XPM=no
LIBXPM=
if test "${HAVE_W32}" = "yes" && test "${opsys}" = "cygwin"; then
  if test "${with_xpm}" != "no"; then
    SAVE_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS -L/usr/lib/noX"
    AC_CHECK_HEADER([noX/xpm.h],
      [AC_CHECK_LIB([Xpm], [XpmReadFileToImage], [HAVE_XPM=yes])])
    if test "${HAVE_XPM}" = "yes"; then
      AC_CACHE_CHECK([for XpmReturnAllocPixels preprocessor define],
      [emacs_cv_cpp_xpm_return_alloc_pixels],
      [AC_EGREP_CPP([no_return_alloc_pixels],
      [#include "noX/xpm.h"
#ifndef XpmReturnAllocPixels
no_return_alloc_pixels
#endif
      ], [emacs_cv_cpp_xpm_return_alloc_pixels=no],
	 [emacs_cv_cpp_xpm_return_alloc_pixels=yes])])

      if test "$emacs_cv_cpp_xpm_return_alloc_pixels" = "no"; then
        HAVE_XPM=no
        LDFLAGS="$SAVE_LDFLAGS"
      fi
    fi
  fi

  if test "${HAVE_XPM}" = "yes"; then
    AC_DEFINE([HAVE_XPM], [1],
      [Define to 1 if you have the Xpm library (-lXpm).])
    LIBXPM=-lXpm
  fi
fi

if test "${HAVE_X11}" = "yes"; then
  dnl Avoid Xpm on AIX unless requested, as it crashes; see Bug#17598.
  case $opsys,$with_xpm_set,$with_xpm in
    aix4-2,set,yes) ;;
    aix4-2,*) with_xpm=no;;
  esac

  if test "${with_xpm}" != "no"; then
    AC_CHECK_HEADER([X11/xpm.h],
      [AC_CHECK_LIB([Xpm], [XpmReadFileToPixmap],
	 [HAVE_XPM=yes], [], [-lX11])])
    if test "${HAVE_XPM}" = "yes"; then
      AC_CACHE_CHECK([for XpmReturnAllocPixels preprocessor define],
      [emacs_cv_cpp_xpm_return_alloc_pixels],
      [AC_EGREP_CPP([no_return_alloc_pixels],
      [#include "X11/xpm.h"
#ifndef XpmReturnAllocPixels
no_return_alloc_pixels
#endif
      ], [emacs_cv_cpp_xpm_return_alloc_pixels=no],
	 [emacs_cv_cpp_xpm_return_alloc_pixels=yes])])

      if test "$emacs_cv_cpp_xpm_return_alloc_pixels" = "no"; then
	HAVE_XPM=no
      fi
    fi
  fi

  if test "${HAVE_XPM}" = "yes"; then
    AC_DEFINE([HAVE_XPM], [1],
      [Define to 1 if you have the Xpm library (-lXpm).])
    LIBXPM=-lXpm
  elif test "$opsys,$LUCID_LIBW" = aix4-2,-lXaw; then
    dnl AIX -lXaw needs -lXpm linked too; see Bug#17598 Message#152.
    LIBXPM=-lXpm
  fi
fi

### FIXME: Perhaps regroup to minimize code duplication due to MinGW's
### slightly different requirements wrt image libraries (it doesn't
### use -lXpm because it loads the xpm shared library dynamically at
### run time).
if test "${opsys}" = "mingw32"; then
  if test "${with_xpm}" != "no"; then
    AC_CHECK_HEADER([X11/xpm.h], [HAVE_XPM=yes], [HAVE_XPM=no], [
#define FOR_MSW 1])
  fi

  if test "${HAVE_XPM}" = "yes"; then
    AC_DEFINE([HAVE_XPM], [1],
      [Define to 1 if you have the Xpm library (-lXpm).])
  fi
fi

AC_SUBST([LIBXPM])

### Use -ljpeg if available, unless '--with-jpeg=no'.
HAVE_JPEG=no
LIBJPEG=
JPEG_CFLAGS=
if test "${HAVE_X11}" = "yes" || test "${HAVE_W32}" = "yes" \
   || test "${HAVE_NS}" = "yes" || test "${HAVE_BE_APP}" = "yes" \
   || test "$window_system" = "pgtk" \
   || test "${REALLY_ANDROID}" = "yes"; then
  if test "${with_jpeg}" != "no"; then
    if test "${REALLY_ANDROID}" = "yes"; then
      # Look for libjpeg using the NDK.
      ndk_SEARCH_MODULE([libjpeg], [JPEG], [HAVE_JPEG=yes])

      if test "$HAVE_JPEG" = "yes"; then
        LIBJPEG="$JPEG_LIBS"

	AC_DEFINE([HAVE_JPEG], [1],
	  [Define to 1 if you have the jpeg library (typically -ljpeg).])
      fi
    else
      AC_CACHE_CHECK([for jpeglib 6b or later],
	[emacs_cv_jpeglib],
	[OLD_LIBS=$LIBS
	 for emacs_cv_jpeglib in yes -ljpeg no; do
	   case $emacs_cv_jpeglib in
	     yes) ;;
	     no) break;;
	     *) LIBS="$LIBS $emacs_cv_jpeglib";;
	   esac
	   AC_LINK_IFELSE(
	     [AC_LANG_PROGRAM(
		[[#undef HAVE_STDLIB_H /* Avoid config.h/jpeglib.h collision.  */
		  #include <stdio.h> /* jpeglib.h needs FILE and size_t.  */
		  #include <jpeglib.h>
		  #include <jerror.h>
		  char verify[JPEG_LIB_VERSION < 62 ? -1 : 1];
		  struct jpeg_decompress_struct cinfo;
		]],
		[[
		  jpeg_create_decompress (&cinfo);
		  WARNMS (&cinfo, JWRN_JPEG_EOF);
		  jpeg_destroy_decompress (&cinfo);
		]])],
	     [emacs_link_ok=yes],
	     [emacs_link_ok=no])
	   LIBS=$OLD_LIBS
	   test $emacs_link_ok = yes && break
	 done])
      if test "$emacs_cv_jpeglib" != no; then
	HAVE_JPEG=yes
	AC_DEFINE([HAVE_JPEG], [1],
	  [Define to 1 if you have the jpeg library (typically -ljpeg).])
	### mingw32 doesn't use -ljpeg, since it loads the library
	### dynamically when needed, and doesn't want a run-time
	### dependency on the jpeglib DLL.
	test "$emacs_cv_jpeglib" != yes && test "${opsys}" != "mingw32" \
	&& LIBJPEG=$emacs_cv_jpeglib
      fi
    fi
  fi
fi
AC_SUBST([LIBJPEG])
AC_SUBST([JPEG_CFLAGS])

HAVE_LCMS2=no
LCMS2_CFLAGS=
LCMS2_LIBS=
if test "${with_lcms2}" != "no"; then
  EMACS_CHECK_MODULES([LCMS2], [lcms2])
fi
if test "${HAVE_LCMS2}" = "yes"; then
  AC_DEFINE([HAVE_LCMS2], [1],
    [Define to 1 if you have the lcms2 library (-llcms2).])
  ### mingw32 doesn't use -llcms2, since it loads the library dynamically.
  if test "${opsys}" = "mingw32"; then
     LCMS2_LIBS=
  fi
fi
AC_SUBST([LCMS2_CFLAGS])
AC_SUBST([LCMS2_LIBS])

HAVE_ZLIB=no
LIBZ=
AS_IF([test "${with_zlib}" != "no"],
  [AC_CACHE_CHECK([for library containing inflateEnd],
     [emacs_cv_libz],
     [AC_LANG_CONFTEST([AC_LANG_PROGRAM([[#include <zlib.h>
					  z_stream stream;]],
					[[return inflateEnd (&stream);]])])
      OLIBS=$LIBS
      for emacs_cv_libz in '' -lz no; do
	test "$emacs_cv_libz" = no && break
	LIBS="$emacs_cv_libz $OLIBS"
	AC_LINK_IFELSE([], [break])
      done
      LIBS=$OLIBS])

   AS_CASE([$emacs_cv_libz],
     [-* | ''],
       [# mingw32 doesn't use -lz, since it loads the library dynamically.
	AS_CASE([$opsys],
	  [mingw32], [LIBZ=],
	  [LIBZ=$emacs_cv_libz])
	HAVE_ZLIB=yes
	AC_DEFINE([HAVE_ZLIB], [1],
	  [Define to 1 if you have the zlib library (-lz).])])])
AC_SUBST([LIBZ])

### Dynamic library support
case $opsys in
  cygwin|mingw32) DYNAMIC_LIB_SUFFIX=".dll" ;;
  darwin) DYNAMIC_LIB_SUFFIX=".dylib" ;;
  *) DYNAMIC_LIB_SUFFIX=".so" ;;
esac
case "${opsys}" in
  darwin) DYNAMIC_LIB_SECONDARY_SUFFIX='.so' ;;
  *) DYNAMIC_LIB_SECONDARY_SUFFIX='' ;;
esac
AC_DEFINE_UNQUOTED(DYNAMIC_LIB_SUFFIX, "$DYNAMIC_LIB_SUFFIX",
  [System extension for dynamic libraries])
AC_DEFINE_UNQUOTED(DYNAMIC_LIB_SECONDARY_SUFFIX, "$DYNAMIC_LIB_SECONDARY_SUFFIX",
  [Alternative system extension for dynamic libraries.])

AC_SUBST(DYNAMIC_LIB_SUFFIX)
AC_SUBST(DYNAMIC_LIB_SECONDARY_SUFFIX)

### Dynamic modules support
LIBMODULES=
HAVE_MODULES=no
MODULES_OBJ=
MODULES_SUFFIX="${DYNAMIC_LIB_SUFFIX}"
MODULES_SECONDARY_SUFFIX="${DYNAMIC_LIB_SECONDARY_SUFFIX}"

# pgtkterm.c uses dlsym
if test $window_system = pgtk; then
  case $opsys in
    gnu|gnu-linux)
    LIBMODULES="-ldl"
    ;;
  esac
fi

AS_IF([test "x$with_modules" != "xno"],
  [AS_CASE(["$opsys"],
    [gnu|gnu-linux],
      [LIBMODULES="-ldl"
       HAVE_MODULES=yes],
    [cygwin|mingw32|darwin],
      [HAVE_MODULES=yes],
    # BSD systems have dlopen in libc.
    [AC_CHECK_FUNC([dlopen], [HAVE_MODULES=yes])])

  AS_IF([test "x$HAVE_MODULES" = "xno"],
    [AS_IF([test "$with_modules" = "ifavailable"],
      [AC_MSG_WARN([Dynamic modules are not supported on your system])],
      [AC_MSG_ERROR([Dynamic modules are not supported on your system])])],
    [SAVE_LIBS=$LIBS
     LIBS="$LIBS $LIBMODULES"
     AC_CHECK_FUNCS([dladdr dlfunc])
     LIBS=$SAVE_LIBS])])

AS_IF([test "x$HAVE_MODULES" = xyes],
   [MODULES_OBJ="emacs-module.o"
    NEED_DYNLIB=yes
    AC_DEFINE([HAVE_MODULES], [1], [Define to 1 if dynamic modules are enabled])
    AC_DEFINE_UNQUOTED([MODULES_SUFFIX], ["$MODULES_SUFFIX"],
      [System extension for dynamic libraries])
    AS_IF([test -n "$MODULES_SECONDARY_SUFFIX"],
      [AC_DEFINE_UNQUOTED([MODULES_SECONDARY_SUFFIX],
	["$MODULES_SECONDARY_SUFFIX"],
	[Alternative system extension for dynamic libraries.])])])

AC_SUBST([MODULES_OBJ])
AC_SUBST([LIBMODULES])
AC_SUBST([HAVE_MODULES])
AC_SUBST([MODULES_SUFFIX])
AC_SUBST([MODULES_SECONDARY_SUFFIX])

ARCH_INDEPENDENT_CONFIG_FILES([src/emacs-module.h:src/emacs-module.in.h])
AC_SUBST_FILE([module_env_snippet_25])
AC_SUBST_FILE([module_env_snippet_26])
AC_SUBST_FILE([module_env_snippet_27])
AC_SUBST_FILE([module_env_snippet_28])
AC_SUBST_FILE([module_env_snippet_29])
AC_SUBST_FILE([module_env_snippet_30])
AC_SUBST_FILE([module_env_snippet_31])
module_env_snippet_25="$srcdir/src/module-env-25.h"
module_env_snippet_26="$srcdir/src/module-env-26.h"
module_env_snippet_27="$srcdir/src/module-env-27.h"
module_env_snippet_28="$srcdir/src/module-env-28.h"
module_env_snippet_29="$srcdir/src/module-env-29.h"
module_env_snippet_30="$srcdir/src/module-env-30.h"
module_env_snippet_31="$srcdir/src/module-env-31.h"
emacs_major_version=`AS_ECHO([$PACKAGE_VERSION]) | sed 's/[[.]].*//'`
AC_SUBST([emacs_major_version])

### Emacs Lisp native compiler support

AC_DEFUN([libgccjit_smoke_test], [
  AC_LANG_SOURCE(
    [[#include <libgccjit.h>
      #include <stdlib.h>
      #include <stdio.h>
      int
      main (int argc, char **argv)
      {
        gcc_jit_context *ctxt;
        gcc_jit_result *result;
        ctxt = gcc_jit_context_acquire ();
        if (!ctxt)
          exit (1);
        gcc_jit_type *int_type =
          gcc_jit_context_get_type (ctxt, GCC_JIT_TYPE_INT);
        gcc_jit_function *func =
          gcc_jit_context_new_function (ctxt, NULL,
                                        GCC_JIT_FUNCTION_EXPORTED,
                                        int_type, "foo", 0, NULL, 0);
        gcc_jit_block *block = gcc_jit_function_new_block (func, "foo");
        gcc_jit_block_end_with_return (
          block,
          NULL,
          gcc_jit_context_new_rvalue_from_int (ctxt, int_type, 1));
        result = gcc_jit_context_compile (ctxt);
        if (!result)
          exit (1);
        typedef int (*fn_type) (void);
        fn_type foo =
          (fn_type)gcc_jit_result_get_code (result, "foo");
        if (!foo)
          exit (1);
        if (foo () != 1)
          exit (1);
        gcc_jit_context_release (ctxt);
        gcc_jit_result_release (result);
        return 0;
      }]])])

AC_DEFUN([libgccjit_not_found_err], [
  AC_MSG_ERROR([Lisp native compiler was requested, but libgccjit was not found.
Please try installing libgccjit or a similar package.
If you are sure you want Emacs be compiled without the Lisp native compiler,
pass the --without-native-compilation option to configure.])])

AC_DEFUN([libgccjit_dev_not_found_err], [
  AC_MSG_ERROR([Lisp native compiler was requested, but libgccjit header files were
not found.
Please try installing libgccjit-dev or a similar package.
If you are sure you want Emacs be compiled without the Lisp native compiler,
pass the --without-native-compilation option to configure.])])

AC_DEFUN([libgccjit_broken_err], [
  AC_MSG_ERROR([The installed libgccjit failed to compile and run a test program using
the libgccjit library; see config.log for the details of the failure.
The test program can be found here:
<https://gcc.gnu.org/onlinedocs/jit/intro/tutorial01.html>.
You can try compiling it yourself to investigate the issues.
Please report the issue to your distribution if libgccjit was installed
through that.
You can find the instructions on how to compile and install libgccjit from
source on this site:
<https://gcc.gnu.org/wiki/JIT>.])])

HAVE_NATIVE_COMP=no
LIBGCCJIT_LIBS=
LIBGCCJIT_CFLAGS=
if test "$canonical" = i686-pc-cygwin; then
  if test "${with_cygwin32_native_compilation}" = yes; then
    with_native_compilation=yes
  elif test "${with_native_compilation}" != no; then
    AC_MSG_ERROR([Native compilation is not supported on 32-bit Cygwin.
If you really want to try it anyway, use the configure option
'--with-cygwin32-native-compilation'.])
  fi
fi

AC_DEFUN([libgccjit_not_found], [
  AC_MSG_WARN([Elisp native compiler can't be enabled as libgccjit was not
found.
Please try installing libgccjit or a similar package if you want to have it
enabled.])

  with_native_compilation=no
])

AC_DEFUN([libgccjit_dev_not_found], [
  AC_MSG_WARN([Elisp native compiler can't be enabled as libgccjit header files
were not found.
Please try installing libgccjit-dev or a similar package if you want to have it
enabled.])

  with_native_compilation=no
])

AC_DEFUN([libgccjit_broken], [
  AC_MSG_WARN([Elisp native compiler can't be enabled as the installed libgccjit
failed to compile and run a test program using the libgccjit library; see
config.log for the details of the failure.
The test program can be found here:
<https://gcc.gnu.org/onlinedocs/jit/intro/tutorial01.html>.
You can try compiling it yourself to investigate the issues.
Please report the issue to your distribution if libgccjit was installed
through that.
You can find the instructions on how to compile and install libgccjit from
source on this site:
<https://gcc.gnu.org/wiki/JIT>.])

  with_native_compilation=no])

if test "$with_features" = "no" \
   && test "${with_native_compilation}" = "default"; then
  with_native_compilation=no
fi

if test "${with_native_compilation}" = "default"; then
    # Check if libgccjit is available.
    AC_CHECK_LIB([gccjit], [gcc_jit_context_acquire],
      [], [libgccjit_not_found])
    AC_CHECK_HEADERS([libgccjit.h], [], [libgccjit_dev_not_found])
    if test "${with_native_compilation}" != "no"; then
      # Check if libgccjit really works.
      AC_RUN_IFELSE([libgccjit_smoke_test], [], [libgccjit_broken])
    fi
fi

if test "${with_native_compilation}" != "no"; then
    if test "${HAVE_ZLIB}" = no; then
       AC_MSG_ERROR(['--with-native-compilation' requires zlib])
    fi

    SAVE_CFLAGS=$CFLAGS
    SAVE_LIBS=$LIBS

    if test "${opsys}" = "darwin"; then
      # Ensure libgccjit installed by Homebrew or macports can be found.
      if test -n "$BREW"; then
        if test -n "`$BREW --prefix --installed libgccjit 2>/dev/null`"; then
          MAC_CFLAGS="-I$(dirname $($BREW ls -v libgccjit | \
                                                grep libgccjit.h))"
          MAC_LIBS="-L$(dirname $($BREW ls -v libgccjit \
                                  | grep -m1 -E 'libgccjit\.(so|dylib)$'))"
        fi
      fi

      if test -n "$HAVE_MACPORTS"; then
        # Determine which gcc version has been installed (gcc11, for
        # instance). Use the latest version, if more than one is
        # available.  (We filter out the gcc4 packages, because they
        # don't support jit, and they have names like "gcc49" that
        # sort later than "gcc11".)
        PORT_PACKAGE=`port installed active | grep '^ *gcc@<:@0-9@:>@* ' | \
                            awk '{ print $1; }' | grep -v 'gcc4@<:@0-9@:>@' | \
                            sort -V | tail -n 1`
        if test -n "$PORT_PACKAGE"; then
	  emacs_val=`port contents $PORT_PACKAGE | grep libgccjit.h`
	  emacs_val=`dirname $emacs_val`
          MAC_CFLAGS="-I$emacs_val"
	  emacs_val=`port contents $PORT_PACKAGE | grep libgccjit.dylib`
	  emacs_val=`dirname $emacs_val`
          MAC_LIBS="-L$emacs_val"
        fi
      fi

      if test -n "$MAC_CFLAGS" && test -n "$MAC_LIBS"; then
        CFLAGS="$CFLAGS ${MAC_CFLAGS}"
        LIBS="$LIBS ${MAC_LIBS}"
      fi
    fi

    # In the default case we already checked
    if test "${with_native_compilation}" != "default"; then
      # Check if libgccjit is available.
      AC_CHECK_LIB([gccjit], [gcc_jit_context_acquire],
        [], [libgccjit_not_found_err])
      AC_CHECK_HEADERS([libgccjit.h], [], [libgccjit_dev_not_found_err])
      # Check if libgccjit really works.
      AC_RUN_IFELSE([libgccjit_smoke_test], [], [libgccjit_broken_err])
    fi
    HAVE_NATIVE_COMP=yes
    case "${opsys}" in
      # mingw32 loads the library dynamically.
      mingw32) ;;
      # Neither NetBSD, OpenBSD nor Haiku have libdl, with all dynamic
      # linker functions placed within libc.
      netbsd|openbsd|haiku)
        LIBGCCJIT_LIBS="-lgccjit" ;;
      darwin)
        LIBGCCJIT_CFLAGS="${MAC_CFLAGS}"
        LIBGCCJIT_LIBS="${MAC_LIBS} -lgccjit -ldl";;
      *)
        LIBGCCJIT_LIBS="-lgccjit -ldl" ;;
    esac
    NEED_DYNLIB=yes
    AC_DEFINE([HAVE_NATIVE_COMP], [1],
      [Define to 1 if native compiler is available.])

    CFLAGS=$SAVE_CFLAGS
    LIBS=$SAVE_LIBS
fi
AC_DEFINE_UNQUOTED([NATIVE_ELISP_SUFFIX], [".eln"],
  [System extension for native-compiled elisp])
AC_SUBST([HAVE_NATIVE_COMP])
AC_SUBST([LIBGCCJIT_CFLAGS])
AC_SUBST([LIBGCCJIT_LIBS])

DYNLIB_OBJ=
if test "${NEED_DYNLIB}" = yes; then
  DYNLIB_OBJ="dynlib.o"
fi
AC_SUBST([DYNLIB_OBJ])

### Use -lpng if available, unless '--with-png=no'.
HAVE_PNG=no
LIBPNG=
PNG_CFLAGS=
if test "${with_png}" != no; then
  # mingw32 loads the library dynamically.
  if test "$opsys" = mingw32; then
    AC_CHECK_HEADER([png.h], [HAVE_PNG=yes])
  elif test "${HAVE_X11}" = "yes" || test "${HAVE_W32}" = "yes" \
       || test "${HAVE_NS}" = "yes" || test "${HAVE_BE_APP}" = "yes" \
       || test "$window_system" = "pgtk" \
       || test "${REALLY_ANDROID}" = "yes"; then
    EMACS_CHECK_MODULES([PNG], [libpng >= 1.0.0])
    if test $HAVE_PNG = yes; then
      LIBPNG=$PNG_LIBS
    else
      # Test old way in case pkg-config doesn't have it (older machines).
      AC_MSG_CHECKING([for libpng not configured by pkg-config])

      png_cflags=`(libpng-config --cflags) 2>&AS_MESSAGE_LOG_FD` &&
      png_ldflags=`(libpng-config --ldflags) 2>&AS_MESSAGE_LOG_FD` || {
	# libpng-config does not work; configure by hand.
	# Debian unstable as of July 2003 has multiple libpngs, and puts png.h
	# in /usr/include/libpng.
	if test -r /usr/include/libpng/png.h &&
	   test ! -r /usr/include/png.h; then
	  png_cflags=-I/usr/include/libpng
	else
	  png_cflags=
	fi
	png_ldflags='-lpng'
      }
      SAVE_CFLAGS=$CFLAGS
      SAVE_LIBS=$LIBS
      CFLAGS="$CFLAGS $png_cflags"
      LIBS="$png_ldflags -lz -lm $LIBS"
      AC_LINK_IFELSE(
	[AC_LANG_PROGRAM([[#include <png.h>]],
	   [[return !png_get_channels (0, 0);]])],
	[HAVE_PNG=yes
	 PNG_CFLAGS=`AS_ECHO(["$png_cflags"]) | sed -e "$edit_cflags"`
	 LIBPNG=$png_ldflags])
      CFLAGS=$SAVE_CFLAGS
      LIBS=$SAVE_LIBS
      AC_MSG_RESULT([$HAVE_PNG])
    fi

    # $LIBPNG requires explicit -lz in some cases.
    # We don't know what those cases are, exactly, so play it safe and
    # append -lz to any nonempty $LIBPNG, unless we're already using LIBZ.
    case " $LIBPNG ",$LIBZ in
      *' -lz '*, | *' ',?*) ;;
      *) LIBPNG="$LIBPNG -lz" ;;
    esac
  fi
fi
if test $HAVE_PNG = yes; then
  AC_DEFINE([HAVE_PNG], [1], [Define to 1 if you have the png library.])

  SAVE_CFLAGS=$CFLAGS
  CFLAGS="$CFLAGS $PNG_CFLAGS"
  AC_CHECK_DECL([png_longjmp],
    [],
    [AC_DEFINE([PNG_DEPSTRUCT], [],
       [Define to empty to suppress deprecation warnings when building
	with --enable-gcc-warnings and with libpng versions before 1.5,
	which lack png_longjmp.])],
    [[#include <png.h>
    ]])
  CFLAGS=$SAVE_CFLAGS
fi
AC_SUBST([LIBPNG])
AC_SUBST([PNG_CFLAGS])

### Use -ltiff if available, unless '--with-tiff=no'.
### mingw32 doesn't use -ltiff, since it loads the library dynamically.
HAVE_TIFF=no
LIBTIFF=
TIFF_CFLAGS=
if test "${opsys}" = "mingw32"; then
  if test "${with_tiff}" != "no"; then
    AC_CHECK_HEADER([tiffio.h], [HAVE_TIFF=yes], [HAVE_TIFF=no])
  fi
  if test "${HAVE_TIFF}" = "yes"; then
    AC_DEFINE([HAVE_TIFF], [1],
      [Define to 1 if you have the tiff library (-ltiff).])
  fi
elif test "${HAVE_X11}" = "yes" || test "${HAVE_W32}" = "yes" \
     || test "${HAVE_NS}" = "yes" || test "${HAVE_BE_APP}" = "yes" \
     || test "$window_system" = "pgtk" \
     || test "${REALLY_ANDROID}" = "yes"; then
  if test "${with_tiff}" != "no"; then
    if test "${REALLY_ANDROID}" != "yes"; then
      AC_CHECK_HEADER([tiffio.h],
	[tifflibs="-lz -lm"
	# At least one tiff package requires the jpeg library.
	if test "${HAVE_JPEG}" = yes; then tifflibs="-ljpeg $tifflibs"; fi
	AC_CHECK_LIB([tiff], [TIFFGetVersion], [HAVE_TIFF=yes], [],
	  [$tifflibs])])
    else
      ndk_SEARCH_MODULE([libtiff], [TIFF], [HAVE_TIFF=yes])

      if test "$HAVE_TIFF" = "yes"; then
        LIBTIFF="$TIFF_LIBS"
      fi
    fi
  fi

  if test "${HAVE_TIFF}" = "yes"; then
    AC_DEFINE([HAVE_TIFF], [1],
      [Define to 1 if you have the tiff library (-ltiff).])

    if test "$REALLY_ANDROID" != "yes"; then
      dnl FIXME -lz -lm, as per libpng?
      LIBTIFF=-ltiff
    fi
  fi
fi
AC_SUBST([LIBTIFF])
AC_SUBST([TIFF_CFLAGS])

### Use -lgif or -lungif if available, unless '--with-gif=no'.
### mingw32 doesn't use -lgif/-lungif, since it loads the library dynamically.
HAVE_GIF=no
GIF_CFLAGS=
LIBGIF=
if test "${opsys}" = "mingw32"; then
  if test "${with_gif}" != "no"; then
    AC_CHECK_HEADER([gif_lib.h], [HAVE_GIF=yes], [HAVE_GIF=no])
  fi
  if test "${HAVE_GIF}" = "yes"; then
    AC_DEFINE([HAVE_GIF], [1],
      [Define to 1 if you have a gif (or ungif) library.])
  fi
elif test "${HAVE_X11}" = "yes" && test "${with_gif}" != "no" \
        || test "${HAVE_W32}" = "yes" || test "${HAVE_NS}" = "yes" \
	|| test "${HAVE_BE_APP}" = "yes" || test "$window_system" = "pgtk" \
	|| test "${REALLY_ANDROID}" = "yes" \
	&& test "${with_gif}" != "no"; then
  AC_CHECK_HEADER([gif_lib.h],
# EGifPutExtensionLast only exists from version libungif-4.1.0b1.
# Earlier versions can crash Emacs, but version 5.0 removes EGifPutExtensionLast.
    [AC_CHECK_LIB([gif], [GifMakeMapObject], [HAVE_GIF=yes],
	[AC_CHECK_LIB([gif], [EGifPutExtensionLast],
	   [HAVE_GIF=yes],
	   [HAVE_GIF=maybe])])])

  if test "$HAVE_GIF" = yes; then
    LIBGIF=-lgif
  elif test "$HAVE_GIF" = maybe; then
# If gif_lib.h but no libgif, try libungif.
    AC_CHECK_LIB([ungif], [EGifPutExtensionLast],
      [HAVE_GIF=yes],
      [HAVE_GIF=no])
    test "$HAVE_GIF" = yes && LIBGIF=-lungif
  fi

# Finally, try ndk-build on Android.
  if test "$REALLY_ANDROID" = "yes"; then
    ndk_SEARCH_MODULE([libgif], [GIF], [HAVE_GIF=yes],
      [HAVE_GIF=no])
    test "$HAVE_GIF" = yes && LIBGIF="$GIF_LIBS"
  fi

  if test "${HAVE_GIF}" = "yes"; then
    AC_DEFINE([HAVE_GIF], [1],
      [Define to 1 if you have a gif (or ungif) library.])
  fi
fi
AC_SUBST([LIBGIF])
AC_SUBST([GIF_CFLAGS])

dnl Check for required libraries.
MISSING=
WITH_IFAVAILABLE=
if test "${HAVE_X11}" = "yes"; then
  case $with_xpm,$HAVE_XPM in
    no,* | ifavailable,* | *,yes) ;;
    *) MISSING="libXpm"
       WITH_IFAVAILABLE="--with-xpm=ifavailable";;
  esac
  case $with_jpeg,$HAVE_JPEG in
    no,* | ifavailable,* | *,yes) ;;
    *) MISSING="$MISSING libjpeg"
       WITH_IFAVAILABLE="$WITH_IFAVAILABLE --with-jpeg=ifavailable";;
  esac
  case $with_png,$HAVE_PNG in
    no,* | ifavailable,* | *,yes) ;;
    *) MISSING="$MISSING libpng"
       WITH_IFAVAILABLE="$WITH_IFAVAILABLE --with-png=ifavailable";;
  esac
  case $with_gif,$HAVE_GIF in
    no,* | ifavailable,* | *,yes) ;;
    *) MISSING="$MISSING libgif/libungif"
       WITH_IFAVAILABLE="$WITH_IFAVAILABLE --with-gif=ifavailable";;
  esac
  case $with_tiff,$HAVE_TIFF in
    no,* | ifavailable,* | *,yes) ;;
    *) MISSING="$MISSING libtiff"
       WITH_IFAVAILABLE="$WITH_IFAVAILABLE --with-tiff=ifavailable";;
  esac
fi
case $with_dbus,$HAVE_DBUS in
  no,* | ifavailable,* | *,yes) ;;
  *) MISSING="$MISSING dbus-1"
     WITH_IFAVAILABLE="$WITH_IFAVAILABLE --with-dbus=ifavailable";;
esac
case $with_gnutls,$HAVE_GNUTLS in
  no,* | ifavailable,* | *,yes) ;;
  *) MISSING="$MISSING gnutls"
     WITH_IFAVAILABLE="$WITH_IFAVAILABLE --with-gnutls=ifavailable";;
esac
case $with_tree_sitter,$HAVE_TREE_SITTER in
  no,* | ifavailable,* | *,yes) ;;
  *) MISSING="$MISSING tree-sitter"
     WITH_IFAVAILABLE="$WITH_IFAVAILABLE --with-tree-sitter=ifavailable";;
esac

if test "X${MISSING}" != X; then
  # If we have a missing library, and we don't have pkg-config installed,
  # the missing pkg-config may be the reason.  Give the user a hint.
  if test "X${PKG_CONFIG}" = X; then
    AC_MSG_WARN([Unable to locate a usable pkg-config])
  fi
  AC_MSG_ERROR([The following required libraries were not found:
    $MISSING
Maybe some development libraries/packages are missing?
To build anyway, give:
    $WITH_IFAVAILABLE
as options to configure.])
fi

### Use -lgpm if available, unless '--with-gpm=no'.
HAVE_GPM=no
LIBGPM=
if test "${with_gpm}" != "no"; then
  AC_CHECK_HEADER([gpm.h],
    [AC_CHECK_LIB([gpm], [Gpm_Open], [HAVE_GPM=yes])])

  if test "${HAVE_GPM}" = "yes"; then
    AC_DEFINE([HAVE_GPM], [1],
      [Define to 1 if you have the gpm library (-lgpm).])
    LIBGPM=-lgpm
  fi
fi
AC_SUBST([LIBGPM])

dnl Check for malloc/malloc.h on darwin
AC_CHECK_HEADERS_ONCE([malloc/malloc.h])

GNUSTEP_CFLAGS=
### Use NeXTstep API to implement GUI.
if test "${HAVE_NS}" = "yes"; then
  AC_DEFINE([HAVE_NS], [1],
    [Define to 1 if you are using the NeXTstep API,
     either GNUstep or Cocoa on macOS.])
  if test "${NS_IMPL_COCOA}" = "yes"; then
    AC_DEFINE([NS_IMPL_COCOA], [1],
      [Define to 1 if you are using NS windowing under macOS.])
  fi
  if test "${NS_IMPL_GNUSTEP}" = "yes"; then
    AC_DEFINE([NS_IMPL_GNUSTEP], [1],
      [Define to 1 if you are using NS windowing under GNUstep.])
    if test $NS_GNUSTEP_CONFIG != yes; then
      # See also .m.o rule in src/Makefile.in.  */
      # FIXME: are all these flags really needed?  Document here why.  */
      GNUSTEP_CFLAGS="-D_REENTRANT -fPIC -fno-strict-aliasing -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
      ## Extra CFLAGS applied to src/*.m files.
      GNU_OBJC_CFLAGS="$GNU_OBJC_CFLAGS -fgnu-runtime -Wno-import -fconstant-string-class=NSConstantString -DGNUSTEP_BASE_LIBRARY=1 -DGNU_GUI_LIBRARY=1 -DGNU_RUNTIME=1 -DGSWARN -DGSDIAGNOSE"
    fi
  fi
  OTHER_FILES=ns-app
fi

### Use session management (-lSM -lICE) if available
HAVE_X_SM=no
LIBXSM=
if test "${HAVE_X11}" = "yes"; then
  AC_CHECK_HEADER([X11/SM/SMlib.h],
    [AC_CHECK_LIB([SM], [SmcOpenConnection], [HAVE_X_SM=yes], [], [-lICE])])

  if test "${HAVE_X_SM}" = "yes"; then
    AC_DEFINE([HAVE_X_SM], [1],
      [Define to 1 if you have the SM library (-lSM).])
    LIBXSM="-lSM -lICE"
  fi
fi
AC_SUBST([LIBXSM])

### Use XRandr (-lXrandr) if available
HAVE_XRANDR=no
if test "${HAVE_X11}" = "yes"; then
  XRANDR_REQUIRED=1.2.2
  XRANDR_MODULES="xrandr >= $XRANDR_REQUIRED"
  EMACS_CHECK_MODULES([XRANDR], [$XRANDR_MODULES])
  if test $HAVE_XRANDR = no; then
    # Test old way in case pkg-config doesn't have it (older machines).
    # Include Xrender.h by hand to work around bug in older Xrandr.h
    # (e.g. RHEL5) and silence (harmless) configure warning (bug#18465).
    AC_CHECK_HEADER([X11/extensions/Xrandr.h],
      [AC_CHECK_LIB([Xrandr], [XRRGetScreenResources], [HAVE_XRANDR=yes])],
      [], [AC_INCLUDES_DEFAULT
#include <X11/extensions/Xrender.h>])
    if test $HAVE_XRANDR = yes; then
      XRANDR_LIBS=-lXrandr
    fi
  fi
  if test $HAVE_XRANDR = yes; then
    AC_DEFINE([HAVE_XRANDR], [1],
      [Define to 1 if you have the XRandr extension.])
  fi
fi
AC_SUBST([XRANDR_CFLAGS])
AC_SUBST([XRANDR_LIBS])

### Use Xinerama (-lXinerama) if available
HAVE_XINERAMA=no
if test "${HAVE_X11}" = "yes"; then
  XINERAMA_REQUIRED=1.0.2
  XINERAMA_MODULES="xinerama >= $XINERAMA_REQUIRED"
  EMACS_CHECK_MODULES([XINERAMA], [$XINERAMA_MODULES])
  if test $HAVE_XINERAMA = no; then
    # Test old way in case pkg-config doesn't have it (older machines).
    AC_CHECK_HEADER([X11/extensions/Xinerama.h],
      [AC_CHECK_LIB([Xinerama], [XineramaQueryExtension],
	 [HAVE_XINERAMA=yes])])
    if test $HAVE_XINERAMA = yes; then
      XINERAMA_LIBS=-lXinerama
    fi
  fi
  if test $HAVE_XINERAMA = yes; then
    AC_DEFINE([HAVE_XINERAMA], [1],
      [Define to 1 if you have the Xinerama extension.])
  fi
fi
AC_SUBST([XINERAMA_CFLAGS])
AC_SUBST([XINERAMA_LIBS])

### Use Xfixes (-lXfixes) if available
HAVE_XFIXES=no
if test "${HAVE_X11}" = "yes"; then
  XFIXES_REQUIRED=1.0.0
  XFIXES_MODULES="xfixes >= $XFIXES_REQUIRED"
  EMACS_CHECK_MODULES([XFIXES], [$XFIXES_MODULES])
  if test $HAVE_XFIXES = no; then
    # Test old way in case pkg-config doesn't have it (older machines).
    AC_CHECK_HEADER([X11/extensions/Xfixes.h],
      [AC_CHECK_LIB([Xfixes], [XFixesHideCursor], [HAVE_XFIXES=yes])])
    if test $HAVE_XFIXES = yes; then
      XFIXES_LIBS=-lXfixes
    fi
  fi
  if test $HAVE_XFIXES = yes; then
    AC_DEFINE([HAVE_XFIXES], [1],
      [Define to 1 if you have the Xfixes extension.])
  fi
fi
AC_SUBST([XFIXES_CFLAGS])
AC_SUBST([XFIXES_LIBS])

## Use XInput 2.0 if available
HAVE_XINPUT2=no
if test "${HAVE_X11}" = "yes" && test "${with_xinput2}" != "no"; then
   EMACS_CHECK_MODULES([XINPUT], [xi])
   if test $HAVE_XINPUT = yes; then
     # Now check for XInput2.h
     AC_CHECK_HEADER([X11/extensions/XInput2.h],
       [AC_CHECK_LIB([Xi], [XIGrabButton], [HAVE_XINPUT2=yes])])
   fi
   if test $HAVE_XINPUT2 = yes; then
     AC_DEFINE([HAVE_XINPUT2], [1],
       [Define to 1 if the X Input Extension version 2.0 or later is present.])
     if test "$USE_GTK_TOOLKIT" = "GTK2"; then
       AC_MSG_WARN([You are building Emacs with GTK+ 2 and the X Input Extension version 2.
This might lead to problems if your version of GTK+ is not built with support for XInput 2.])
     fi

     # Now check for some members (which used in conjunction with
     # protocol definitions) can be used to determine the version of
     # XInput supported.
     AC_CHECK_MEMBERS([XIScrollClassInfo.type, XITouchClassInfo.type,
       XIBarrierReleasePointerInfo.deviceid, XIGestureClassInfo.type],
       [], [], [#include <X11/extensions/XInput2.h>])
   fi
fi
AC_SUBST([XINPUT_CFLAGS])
AC_SUBST([XINPUT_LIBS])

XSYNC_LIBS=
XSYNC_CFLAGS=
HAVE_XSYNC=no
if test "${HAVE_X11}" = "yes"; then
   AC_CHECK_HEADER([X11/extensions/sync.h],
     [AC_CHECK_LIB([Xext], [XSyncQueryExtension], [HAVE_XSYNC=yes])],
     [], [#include <X11/Xlib.h>])

  if test "${HAVE_XSYNC}" = "yes"; then
    AC_DEFINE([HAVE_XSYNC], [1],
      [Define to 1 if the X Synchronization Extension is available.])
    XSYNC_LIBS="-lXext"
    OLDLIBS="$LIBS"
    LIBS="-lXext $LIBS" # Set this temporarily for AC_CHECK_FUNC
    AC_CHECK_FUNCS([XSyncTriggerFence]) # Check for version 3.1
    LIBS="$OLDLIBS"
  fi
fi
AC_SUBST([XSYNC_LIBS])
AC_SUBST([XSYNC_CFLAGS])

### Use Xdbe (-lXdbe) if available
HAVE_XDBE=no
if test "${HAVE_X11}" = "yes"; then
  if test "${with_xdbe}" != "no"; then
    AC_CHECK_HEADER([X11/extensions/Xdbe.h],
      [AC_CHECK_LIB([Xext], [XdbeAllocateBackBufferName], [HAVE_XDBE=yes])],
      [],
      [#include <X11/Xlib.h>
      ])
  fi
  if test $HAVE_XDBE = yes; then
    XDBE_LIBS=-lXext
  fi
  if test $HAVE_XDBE = yes; then
    AC_DEFINE([HAVE_XDBE], [1], [Define to 1 if you have the Xdbe extension.])
  fi
fi
AC_SUBST([XDBE_CFLAGS])
AC_SUBST([XDBE_LIBS])

### Use the Nonrectangular Window Shape extension if available.
HAVE_XSHAPE=no
HAVE_XCB_SHAPE=no
if test "${HAVE_X11}" = "yes"; then
  AC_CHECK_HEADER([X11/extensions/shape.h],
    [AC_CHECK_LIB([Xext], [XShapeQueryVersion], [HAVE_XSHAPE=yes])],
    [],
    [#include <X11/extensions/shape.h>
    ])
  if test $HAVE_XSHAPE = yes; then
    XSHAPE_LIBS=-lXext
    AC_CHECK_HEADER([xcb/shape.h],
      [AC_CHECK_LIB([xcb-shape], [xcb_shape_combine], [HAVE_XCB_SHAPE=yes])],
      [],
      [#include <xcb/shape.h>])

    if test $HAVE_XCB_SHAPE = yes && test "$XCB_LIBS" != ""; then
      XSHAPE_LIBS="$XSHAPE_LIBS -lxcb-shape"
      AC_DEFINE([HAVE_XCB_SHAPE], [1],
	[Define to 1 if XCB supports the
	 Nonrectangular Window Shape extension.])
    fi
  fi
  if test $HAVE_XSHAPE = yes; then
    AC_DEFINE([HAVE_XSHAPE], [1],
      [Define to 1 if you have the Nonrectangular Window Shape extension.])
  fi
fi
AC_SUBST([XSHAPE_CFLAGS])
AC_SUBST([XSHAPE_LIBS])

### Use Xcomposite (-lXcomposite) if available
HAVE_XCOMPOSITE=no
if test "${HAVE_X11}" = "yes"; then
  AC_CHECK_HEADER([X11/extensions/Xcomposite.h],
    [AC_CHECK_LIB([Xcomposite], [XCompositeRedirectWindow],
       [HAVE_XCOMPOSITE=yes])],
    [],
    [#include <X11/extensions/Xcomposite.h>
    ])
  if test $HAVE_XCOMPOSITE = yes; then
    XCOMPOSITE_LIBS=-lXcomposite
  fi
  if test $HAVE_XCOMPOSITE = yes; then
    AC_DEFINE([HAVE_XCOMPOSITE], [1],
      [Define to 1 if you have the XCOMPOSITE extension.])
  fi
fi
AC_SUBST([XCOMPOSITE_CFLAGS])
AC_SUBST([XCOMPOSITE_LIBS])

### Use libxml (-lxml2) if available
### mingw32 doesn't use -lxml2, since it loads the library dynamically.
HAVE_LIBXML2=no
if test "${with_xml2}" != "no"; then
  ### I'm not sure what the version number should be, so I just guessed.
  EMACS_CHECK_MODULES([LIBXML2], [libxml-2.0 > 2.6.17])
  # Built-in libxml2 on OS X 10.8 lacks libxml-2.0.pc.
  if test "${HAVE_LIBXML2}" != "yes" && test "$opsys" = "darwin"; then
    SAVE_CPPFLAGS="$CPPFLAGS"
    if test -z "$xcsdkdir" -a -n "$XCRUN" -a ! -d /usr/include; then
      dnl /usr/include is not found.  Try Xcode SDK dir if it is sane.
      xcsdkdir=`$XCRUN --show-sdk-path 2>/dev/null`
      case $xcsdkdir in
	*[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
	xcsdkdir="" ;;
      esac
    fi
    CPPFLAGS="$CPPFLAGS -isystem${xcsdkdir}/usr/include/libxml2"
    AC_CHECK_HEADER([libxml/HTMLparser.h],
      [AC_CHECK_DECL([HTML_PARSE_RECOVER], [HAVE_LIBXML2=yes], [],
		     [#include <libxml/HTMLparser.h>])])
    CPPFLAGS="$SAVE_CPPFLAGS"
    if test "${HAVE_LIBXML2}" = "yes"; then
      LIBXML2_CFLAGS="-isystem${xcsdkdir}/usr/include/libxml2"
      LIBXML2_LIBS="-lxml2"
    fi
  fi
  if test "${HAVE_LIBXML2}" = "yes"; then
    if test "${opsys}" != "mingw32"; then
      SAVE_CFLAGS=$CFLAGS
      CFLAGS="$CFLAGS $LIBXML2_CFLAGS"
      EMACS_CHECK_LIB([xml2], [htmlReadMemory],
	[HAVE_LIBXML2=yes],
	[HAVE_LIBXML2=no],
        [$LIBXML2_LIBS], [#include <libxml/HTMLparser.h>])
      CFLAGS="$SAVE_CFLAGS"
    else
      LIBXML2_LIBS=""
    fi
    if test "${HAVE_LIBXML2}" = "yes"; then
      AC_DEFINE([HAVE_LIBXML2], [1],
	[Define to 1 if you have the libxml library (-lxml2).])
    else
      LIBXML2_LIBS=""
      LIBXML2_CFLAGS=""
    fi
  fi
fi
AC_SUBST([LIBXML2_LIBS])
AC_SUBST([LIBXML2_CFLAGS])

BLESSMAIL_TARGET=
LIBS_MAIL=
if test ! "$with_mailutils"; then
  # Check for mail-locking functions in a "mail" library.  Probably this should
  # have the same check as for liblockfile below.
  AC_CHECK_LIB([mail], [maillock], [have_mail=yes], [have_mail=no])
  if test $have_mail = yes; then
    LIBS_MAIL=-lmail
    AC_DEFINE([HAVE_LIBMAIL], [1],
      [Define to 1 if you have the 'mail' library (-lmail).])

    OLD_LIBS=$LIBS
    LIBS="$LIBS_MAIL $LIBS"
    AC_CHECK_FUNCS([touchlock])
    LIBS=$OLD_LIBS
  fi
  dnl Debian, at least:
  AC_CHECK_LIB([lockfile], [maillock], [have_lockfile=yes], [have_lockfile=no])
  if test $have_lockfile = yes; then
     LIBS_MAIL=-llockfile
     AC_DEFINE([HAVE_LIBLOCKFILE], [1],
       [Define to 1 if you have the 'lockfile' library (-llockfile).])
  else
    # If we have the shared liblockfile, assume we must use it for mail
    # locking (e.g. Debian).  If we couldn't link against liblockfile
    # (no liblockfile.a installed), ensure that we don't need to.
    dnl This works for files generally, not just executables.
    dnl Should we look elsewhere for it?  Maybe examine /etc/ld.so.conf?
    AC_CHECK_PROG([liblockfile], [liblockfile.so], [yes], [no],
		  [/usr/lib:/lib:/usr/local/lib:$LD_LIBRARY_PATH])
    if test "$ac_cv_prog_liblockfile" = yes; then
      AC_MSG_ERROR([Shared liblockfile found but can't link against it.
This probably means that movemail could lose mail.
There may be a 'development' package to install containing liblockfile.])
    fi
  fi
  AC_CHECK_HEADERS([maillock.h])

  ## Define MAIL_USE_FLOCK (or LOCKF) if the mailer uses flock (or lockf) to
  ## interlock access to the mail spool.  The alternative is a lock file named
  ## /usr/spool/mail/$USER.lock.
  mail_lock=no
  case $opsys in
    aix4-2) mail_lock="lockf" ;;

    gnu|freebsd|dragonfly|netbsd|openbsd|darwin) mail_lock="flock" ;;

    ## On GNU/Linux systems, both methods are used by various mail programs.
    ## I assume most people are using newer mailers that have heard of flock.
    ## Change this if you need to.
    ## Debian contains a patch which says: "On Debian/GNU/Linux systems,
    ## configure gets the right answers, and that means *NOT* using flock.
    ## Using flock is guaranteed to be the wrong thing. See Debian Policy
    ## for details." and then uses '#ifdef DEBIAN'.  Unfortunately the
    ## Debian maintainer hasn't provided a clean fix for Emacs.
    ## movemail.c will use 'maillock' when MAILDIR, HAVE_LIBMAIL and
    ## HAVE_MAILLOCK_H are defined, so the following appears to be the
    ## correct logic.  -- fx
    ## We must check for HAVE_LIBLOCKFILE too, as movemail does.
    ## liblockfile is a Free Software replacement for libmail, used on
    ## Debian systems and elsewhere. -rfr.
    gnu-*)
      mail_lock="flock"
      if test $have_mail = yes || test $have_lockfile = yes; then
	test $ac_cv_header_maillock_h = yes && mail_lock=no
      fi ;;

    mingw32)
      mail_lock="none-needed" ;;
  esac

  case $mail_lock in
    flock) AC_DEFINE([MAIL_USE_FLOCK], [1],
	     [Define if the mailer uses flock to interlock the mail spool.]);;

    lockf) AC_DEFINE([MAIL_USE_LOCKF], [1],
	     [Define if the mailer uses lockf to interlock the mail spool.]);;

    none-needed) ;;

    *) BLESSMAIL_TARGET="need-blessmail" ;;
  esac
fi
AC_SUBST([BLESSMAIL_TARGET])
AC_SUBST([LIBS_MAIL])

HAVE_SECCOMP=no
AC_CHECK_HEADERS(
  [linux/seccomp.h linux/filter.h],
  [AC_CHECK_DECLS(
    [SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC],
    [HAVE_SECCOMP=yes], [],
    [[
    #include <linux/seccomp.h>
    ]])])
AC_SUBST([HAVE_SECCOMP])

EMACS_CHECK_MODULES([LIBSECCOMP], [libseccomp >= 2.5.2])
AC_SUBST([HAVE_LIBSECCOMP])
AC_SUBST([LIBSECCOMP_LIBS])
AC_SUBST([LIBSECCOMP_CFLAGS])

SIZEOF_LONG="$ac_cv_sizeof_long"
AC_SUBST([SIZEOF_LONG])

OLD_LIBS=$LIBS
LIBS="$LIB_PTHREAD $LIB_MATH $LIBS"
AC_CHECK_FUNCS([accept4 fchdir gethostname \
getrusage get_current_dir_name \
lrand48 random rint tcdrain trunc \
select getpagesize newlocale \
getrlimit setrlimit shutdown \
pthread_sigmask strsignal setitimer \
sendto recvfrom getsockname getifaddrs freeifaddrs \
gai_strerror sync \
endpwent getgrent endgrent \
cfmakeraw cfsetspeed __executable_start log2 pthread_setname_np \
pthread_set_name_np])

# getpwent is not present in older versions of Android.  (bug#65319)
gl_CHECK_FUNCS_ANDROID([getpwent], [[#include <pwd.h>]])

# renameat2 is not present in older versions of Android.
gl_CHECK_FUNCS_ANDROID([renameat2], [[#include <stdio.h>]])

if test "$ac_cv_func_cfmakeraw" != "yes"; then
  # On some systems (Android), cfmakeraw is inline, so AC_CHECK_FUNCS
  # cannot find it.  Check if some code including termios.h and using
  # cfmakeraw builds.
  AC_CACHE_CHECK([whether cfmakeraw is inline],
   [emacs_cv_func_cfmakeraw_inline],
   [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
       [[#include <termios.h>]],
       [[&cfmakeraw;]])],
     [emacs_cv_func_cfmakeraw_inline=yes],
     [emacs_cv_func_cfmakeraw_inline=no])])

  if test "$emacs_cv_func_cfmakeraw_inline" = "yes"; then
     # Define HAVE_CFMAKERAW again.
     AC_DEFINE([HAVE_CFMAKERAW], [1])
  fi
fi

if test "$ac_cv_func_cfsetspeed" != "yes"; then
  AC_CACHE_CHECK([whether cfsetspeed is inline],
   [emacs_cv_func_cfsetspeed_inline],
   [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
       [[#include <termios.h>]],
       [[&cfsetspeed;]])],
     [emacs_cv_func_cfsetspeed_inline=yes],
     [emacs_cv_func_cfsetspeed_inline=no])])

  if test "$emacs_cv_func_cfsetspeed_inline" = "yes"; then
     # Define HAVE_CFSETSPEED again.
     AC_DEFINE([HAVE_CFSETSPEED], [1])
  fi
fi

LIBS=$OLD_LIBS

if test "$ac_cv_func_pthread_setname_np" = "yes"; then
  AC_CACHE_CHECK(
   [whether pthread_setname_np takes a single argument],
   [emacs_cv_pthread_setname_np_1arg],
   [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM(
       [[#include <pthread.h>]],
       [[pthread_setname_np ("a");]])],
     [emacs_cv_pthread_setname_np_1arg=yes],
     [emacs_cv_pthread_setname_np_1arg=no])])
  if test "$emacs_cv_pthread_setname_np_1arg" = "yes"; then
    AC_DEFINE(
      [HAVE_PTHREAD_SETNAME_NP_1ARG], [1],
      [Define to 1 if pthread_setname_np takes a single argument.])
  else
    AC_CACHE_CHECK(
     [whether pthread_setname_np takes three arguments],
     [emacs_cv_pthread_setname_np_3arg],
     [AC_COMPILE_IFELSE(
       [AC_LANG_PROGRAM(
         [[#include <pthread.h>]],
         [[pthread_setname_np (0, "%s", "a");]])],
       [emacs_cv_pthread_setname_np_3arg=yes],
       [emacs_cv_pthread_setname_np_3arg=no])])
     if test "$emacs_cv_pthread_setname_np_3arg" = "yes"; then
       AC_DEFINE(
	 [HAVE_PTHREAD_SETNAME_NP_3ARG], [1],
         [Define to 1 if pthread_setname_np takes three arguments.])
     fi
  fi
fi

dnl No need to check for posix_memalign if aligned_alloc works.
AC_CHECK_FUNCS([aligned_alloc posix_memalign], [break])
AC_CHECK_DECLS([aligned_alloc], [], [], [[#include <stdlib.h>]])

# Dump loading.  Android lacks posix_madvise.
AC_CHECK_FUNCS([posix_madvise madvise])

dnl Cannot use AC_CHECK_FUNCS
AC_CACHE_CHECK([for __builtin_frame_address],
  [emacs_cv_func___builtin_frame_address],
  [AC_LINK_IFELSE([AC_LANG_PROGRAM([], [__builtin_frame_address (0);])],
     [emacs_cv_func___builtin_frame_address=yes],
     [emacs_cv_func___builtin_frame_address=no])])
if test $emacs_cv_func___builtin_frame_address = yes; then
  AC_DEFINE([HAVE___BUILTIN_FRAME_ADDRESS], [1],
	    [Define to 1 if you have the '__builtin_frame_address' function.])
fi
AC_CACHE_CHECK([for __builtin_unwind_init],
	       [emacs_cv_func___builtin_unwind_init],
[AC_LINK_IFELSE([AC_LANG_PROGRAM([], [__builtin_unwind_init ();])],
		[emacs_cv_func___builtin_unwind_init=yes],
		[emacs_cv_func___builtin_unwind_init=no])])
if test $emacs_cv_func___builtin_unwind_init = yes; then
  AC_DEFINE([HAVE___BUILTIN_UNWIND_INIT], [1],
	    [Define to 1 if you have the '__builtin_unwind_init' function.])
fi

AC_CHECK_HEADERS_ONCE([sys/un.h])

AC_FUNC_FSEEKO

# UNIX98 PTYs.
AC_CHECK_FUNCS([grantpt])

# PTY-related GNU extensions.
AC_CHECK_FUNCS([getpt posix_openpt])

dnl Run a test program that contains a call to tputs, a call that is
dnl never executed.  This tests whether a pre-'main' dynamic linker
dnl works with the library.  It's too much trouble to actually call
dnl tputs in the test program, due to portability hassles.  When
dnl cross-compiling, assume the test program will run if it links.
AC_DEFUN([tputs_link_source], [
  AC_LANG_SOURCE(
     [[extern void tputs (const char *, int, int (*)(int));
       int main (int argc, char **argv)
       {
	  if (argc == 10000)
	    tputs (argv[0], 0, 0);
	  return 0;
       }]])
])
# Check this now, so that we will NOT find the above functions in ncurses.
# That is because we have not set up to link ncurses in lib-src.
# It's better to believe a function is not available
# than to expect to find it in ncurses.
# Also we need tputs and friends to be able to build at all.
AC_CACHE_CHECK([for library containing tputs], [emacs_cv_tputs_lib],
[if test "${opsys}" = "mingw32" || test x"$REALLY_ANDROID" = "xyes"; then
  emacs_cv_tputs_lib='none required'
else
  # curses precedes termcap because of AIX (Bug#9736#35) and OpenIndiana.
  tputs_libraries='tinfo ncurses terminfo curses termcap tinfow ncursesw'
  for tputs_library in '' $tputs_libraries; do
    OLIBS=$LIBS
    if test -z "$tputs_library"; then
      emacs_cv_tputs_lib='none required'
    else
      emacs_cv_tputs_lib=-l$tputs_library
      LIBS="$emacs_cv_tputs_lib $LIBS"
    fi
    AC_RUN_IFELSE([tputs_link_source], [], [emacs_cv_tputs_lib=no],
      [AC_LINK_IFELSE([tputs_link_source], [], [emacs_cv_tputs_lib=no])])
    LIBS=$OLIBS
    if test "X$emacs_cv_tputs_lib" != Xno; then
      break
    fi
  done
fi])
AS_CASE(["$emacs_cv_tputs_lib"],
  [no], [AC_MSG_ERROR([The required function 'tputs' was not found in any library.
The following libraries were tried (in order):
  libtinfo, libncurses, libterminfo, libcurses, libtermcap
Please try installing whichever of these libraries is most appropriate
for your system, together with its header files.
For example, a libncurses-dev(el) or similar package.])],
  [-l*], [LIBS_TERMCAP=$emacs_cv_tputs_lib],
  [*], [LIBS_TERMCAP=])

## Use termcap instead of terminfo?
## Only true for: freebsd < 40000, ms-w32, msdos, netbsd < 599002500.
TERMINFO=yes
## FIXME?  In the cases below where we unconditionally set
## LIBS_TERMCAP="-lncurses", this overrides LIBS_TERMCAP = -ltinfo,
## if that was found above to have tputs.
## Should we use the gnu* logic everywhere?
case "$opsys$REALLY_ANDROID" in
  ## darwin: Prevents crashes when running Emacs in Terminal.app under 10.2.
  ##  The ncurses library has been moved out of the System framework in
  ##  Mac OS X 10.2.  So if configure detects it, set the command-line
  ##  option to use it.
  darwin) LIBS_TERMCAP="-lncurses" ;;

  gnu*) test -z "$LIBS_TERMCAP" && LIBS_TERMCAP="-lncurses" ;;

  freebsd)
    AC_MSG_CHECKING([whether FreeBSD is new enough to use terminfo])
    AC_CACHE_VAL([emacs_cv_freebsd_terminfo],
    [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <osreldate.h>]],
[[#if __FreeBSD_version < 400000
fail;
#endif
]])], [emacs_cv_freebsd_terminfo=yes],
      [emacs_cv_freebsd_terminfo=no])])

    AC_MSG_RESULT([$emacs_cv_freebsd_terminfo])

    if test $emacs_cv_freebsd_terminfo = yes; then
      LIBS_TERMCAP="-lncurses"
    else
      TERMINFO=no
      LIBS_TERMCAP="-ltermcap"
    fi
    ;;

  # The case condition is a concatenation of both $opsys and
  # $REALLY_ANDROID.  Only disable termcap if building a GUI program.
  # (bug#65340)
  mingw32 | androidyes)
    TERMINFO=no
    LIBS_TERMCAP=
    ;;

  netbsd)
    # NetBSD versions prior to 6.0 lack native terminfo, but have a
    # tputs() built on top of termcap in these libraries. Use native
    # termcap instead in this case. NetBSD >= 6.0 has native terminfo
    # implementation in -lterminfo.
    if test "x$LIBS_TERMCAP" = "x-ltermcap" -o "x$LIBS_TERMCAP" = "x-lcurses"; then
      TERMINFO=no
      LIBS_TERMCAP="-ltermcap"
    fi
    ;;

  openbsd | dragonfly) LIBS_TERMCAP="-lncurses" ;;

  ## hpux: Make sure we get select from libc rather than from libcurses
  ##  because libcurses on HPUX 10.10 has a broken version of select.
  ##  We used to use -lc -lcurses, but this may be cleaner.
  ## FIXME?  But TERMINFO = yes on hpux (it used to be explicitly
  # set that way, now it uses the default).  Isn't this a contradiction?
  hpux*) LIBS_TERMCAP="-ltermcap" ;;

esac

TERMCAP_OBJ=tparam.o
if test $TERMINFO = yes; then
  AC_DEFINE([TERMINFO], [1],
    [Define to 1 if you use terminfo instead of termcap.])
  TERMCAP_OBJ=terminfo.o
  AC_CACHE_CHECK([whether $LIBS_TERMCAP library defines BC],
    [emacs_cv_terminfo_defines_BC],
    [OLD_LIBS=$LIBS
     LIBS="$LIBS $LIBS_TERMCAP"
     AC_LINK_IFELSE([AC_LANG_PROGRAM([[extern char *BC;]], [[return !*BC;]])],
       [emacs_cv_terminfo_defines_BC=yes],
       [emacs_cv_terminfo_defines_BC=no])
     LIBS=$OLD_LIBS])
  if test "$emacs_cv_terminfo_defines_BC" = yes; then
    AC_DEFINE([TERMINFO_DEFINES_BC], [1], [Define to 1 if the
      terminfo library defines the variables BC, PC, and UP.])
  fi
fi
if test "X$LIBS_TERMCAP" = "X-lncurses"; then
  AC_DEFINE([USE_NCURSES], [1], [Define to 1 if you use ncurses.])
fi
AC_SUBST([LIBS_TERMCAP])
AC_SUBST([TERMCAP_OBJ])

# GNU/Linux-specific timer functions.
AC_CACHE_CHECK([for timerfd interface], [emacs_cv_have_timerfd],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM([[#include <sys/timerfd.h>
		      ]],
		      [[timerfd_create (CLOCK_REALTIME,
					TFD_CLOEXEC | TFD_NONBLOCK);
			timerfd_settime (0, TFD_TIMER_ABSTIME, 0, 0);]])],
     [emacs_cv_have_timerfd=yes],
     [emacs_cv_have_timerfd=no])])
if test "$emacs_cv_have_timerfd" = yes; then
  AC_DEFINE([HAVE_TIMERFD], [1],
    [Define to 1 if timerfd functions are supported as in GNU/Linux.])
fi

# Alternate stack for signal handlers.
AC_CACHE_CHECK([whether signals can be handled on alternate stack],
	       [emacs_cv_alternate_stack],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM([[#include <signal.h>
			#include <stdlib.h>
		      ]],
		      [[stack_t ss;
			struct sigaction sa;
			ss.ss_sp = malloc (SIGSTKSZ);
			ss.ss_size = SIGSTKSZ;
			sa.sa_flags = SA_SIGINFO | SA_ONSTACK;
			sigaltstack (&ss, 0);
			sigaction (SIGSEGV, &sa, 0);]])],
     [emacs_cv_alternate_stack=yes],
     [emacs_cv_alternate_stack=no])])

# Do we need the Hesiod library to provide the support routines?
dnl FIXME?  Should we be skipping this on Darwin too?
LIBHESIOD=
LIBRESOLV=
if test "$with_hesiod" != no ; then
  # Don't set $LIBS here -- see comments above.  FIXME which comments?
  resolv=no
  AC_CHECK_FUNC([res_send], [], [AC_CHECK_FUNC([__res_send], [],
     [AC_CHECK_LIB([resolv], [res_send], [resolv=yes],
		  [AC_CHECK_LIB([resolv], [__res_send], [resolv=yes])])])])
  if test "$resolv" = yes ; then
    RESOLVLIB=-lresolv
  else
    RESOLVLIB=
  fi
  hesiod=no
  AC_CHECK_FUNC([hes_getmailhost], [],
    [AC_CHECK_LIB([hesiod], [hes_getmailhost],
       [hesiod=yes], [:], [$RESOLVLIB])])

  if test x"$hesiod" = xyes; then
    LIBHESIOD=-lhesiod
    LIBRESOLV=$RESOLVLIB
  fi
fi
AC_SUBST([LIBHESIOD])
AC_SUBST([LIBRESOLV])

# These tell us which Kerberos-related libraries to use.
COM_ERRLIB=
CRYPTOLIB=
KRB5LIB=
DESLIB=
KRB4LIB=

if test "${with_kerberos}" != no; then
  OLD_LIBS=$LIBS
  AC_CHECK_LIB([com_err], [com_err], [have_com_err=yes], [have_com_err=no])
  if test $have_com_err = yes; then
    COM_ERRLIB=-lcom_err
    LIBS="$COM_ERRLIB $LIBS"
  fi
  AC_CHECK_LIB([crypto], [mit_des_cbc_encrypt],
    [have_crypto=yes],
    [have_crypto=no])
  if test $have_crypto = yes; then
    CRYPTOLIB=-lcrypto
    LIBS="$CRYPTOLIB $LIBS"
  fi
  AC_CHECK_LIB([k5crypto], [mit_des_cbc_encrypt],
    [have_k5crypto=yes],
    [have_k5crypto=no])
  if test $have_k5crypto = yes; then
    CRYPTOLIB=-lk5crypto
    LIBS="$CRYPTOLIB $LIBS"
  fi
  AC_CHECK_LIB([krb5], [krb5_init_context], [have_krb5=yes], [have_krb5=no])
  if test $have_krb5=yes; then
    KRB5LIB=-lkrb5
    LIBS="$KRB5LIB $LIBS"
  fi
  dnl FIXME Simplify.  Does not match 22 logic, thanks to default_off?
  if test "${with_kerberos5}" = no; then
    AC_CHECK_LIB([des425], [des_cbc_encrypt],
      [have_des425=yes],
      [have_des425=no])
    if test $have_des425 = yes; then
      DESLIB=-ldes425
      LIBS="$DESLIB $LIBS"
    else
      AC_CHECK_LIB([des], [des_cbc_encrypt], [have_des=yes], [have_des=no])
      if test $have_des = yes; then
        DESLIB=-ldes
        LIBS="$DESLIB $LIBS"
      fi
    fi
    AC_CHECK_LIB([krb4], [krb_get_cred], [have_krb4=yes], [have_krb4=no])
    if test $have_krb4 = yes; then
      KRB4LIB=-lkrb4
      LIBS="$KRB4LIB $LIBS"
    else
      AC_CHECK_LIB([krb], [krb_get_cred], [have_krb=yes], [have_krb=no])
      if test $have_krb = yes; then
        KRB4LIB=-lkrb
        LIBS="$KRB4LIB $LIBS"
      fi
    fi
  fi

  if test "${with_kerberos5}" != no; then
    AC_CHECK_HEADERS([krb5.h],
      [AC_CHECK_MEMBERS([krb5_error.text, krb5_error.e_text], [], [],
		        [#include <krb5.h>])])
  else
    AC_CHECK_HEADERS([krb.h], [],
		     [AC_CHECK_HEADERS([kerberosIV/krb.h], [],
				       [AC_CHECK_HEADERS([kerberos/krb.h])])])
  fi
  AC_CHECK_HEADERS([com_err.h])
  LIBS=$OLD_LIBS
fi

AC_SUBST([COM_ERRLIB])
AC_SUBST([CRYPTOLIB])
AC_SUBST([KRB5LIB])
AC_SUBST([DESLIB])
AC_SUBST([KRB4LIB])

AC_CHECK_HEADERS([valgrind/valgrind.h])

AC_CHECK_MEMBERS([struct unipair.unicode], [], [], [[#include <linux/kd.h>]])

AC_CHECK_FUNCS_ONCE([__lsan_ignore_object])

AC_FUNC_FORK

dnl AC_CHECK_FUNCS_ONCE wouldn’t be right for snprintf, which needs
dnl the current CFLAGS etc.
AC_CHECK_FUNCS([snprintf open_memstream])

dnl posix_spawn.  The chdir and setsid functionality is relatively
dnl recent, so we check for it specifically.
AC_CHECK_HEADERS([spawn.h])
AC_SUBST([HAVE_SPAWN_H])
gl_CHECK_FUNCS_ANDROID([posix_spawn], [#include <spawn.h>])
gl_CHECK_FUNCS_ANDROID_MACOS([posix_spawn_file_actions_addchdir], [#include <spawn.h>])
gl_CHECK_FUNCS_ANDROID([posix_spawn_file_actions_addchdir_np], [#include <spawn.h>])
gl_CHECK_FUNCS_ANDROID([posix_spawnattr_setflags], [#include <spawn.h>])
AC_SUBST([HAVE_POSIX_SPAWN])
AC_SUBST([HAVE_POSIX_SPAWN_FILE_ACTIONS_ADDCHDIR])
AC_SUBST([HAVE_POSIX_SPAWN_FILE_ACTIONS_ADDCHDIR_NP])
AC_SUBST([HAVE_POSIX_SPAWNATTR_SETFLAGS])
AC_CHECK_DECLS([POSIX_SPAWN_SETSID], [], [], [[
               #include <spawn.h>
               ]])
AC_SUBST([HAVE_DECL_POSIX_SPAWN_SETSID])

dnl Check for glib.  This differs from other library checks in that
dnl Emacs need not link to glib unless some other library is already
dnl linking to glib.  Although glib provides no facilities that Emacs
dnl needs for its own purposes, when glib is present Emacs needs to
dnl use primitives like g_main_context_query to avoid clashing with
dnl glib at a low level.
dnl
dnl Check this late, since it depends on $GTK_CFLAGS etc.
XGSELOBJ=
AC_CACHE_CHECK([whether GLib is linked in], [emacs_cv_links_glib],
[OLDCFLAGS="$CFLAGS"
OLDLIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS $RSVG_CFLAGS $DBUS_CFLAGS $SETTINGS_CFLAGS"
LIBS="$LIBS $GTK_LIBS $RSVG_LIBS $DBUS_LIBS $SETTINGS_LIBS"
CFLAGS="$CFLAGS $NOTIFY_CFLAGS $CAIRO_CFLAGS"
LIBS="$LIBS $NOTIFY_LIBS $CAIRO_LIBS"
AC_LINK_IFELSE([AC_LANG_PROGRAM(
	[[#include <glib.h>
	]],
	[[g_print ("Hello world");]])],
     [emacs_cv_links_glib=yes],
     [emacs_cv_links_glib=no])
CFLAGS="$OLDCFLAGS"
LIBS="$OLDLIBS"])
if test "${emacs_cv_links_glib}" = "yes"; then
  AC_DEFINE([HAVE_GLIB], [1], [Define to 1 if GLib is linked in.])
  if test "$HAVE_NS" = no ; then
    XGSELOBJ=xgselect.o
  fi
fi
AC_SUBST([XGSELOBJ])

AC_DEFUN([EMACS_PAPER_WIDTH],
  [AC_REQUIRE([AM_LANGINFO_CODESET])
   AS_IF([test "$am_cv_langinfo_codeset" = yes],
     [AC_CACHE_CHECK([for nl_langinfo and _NL_PAPER_WIDTH],
	[emacs_cv_langinfo__nl_paper_width],
	[AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <langinfo.h>]],
	  [[char *cs = nl_langinfo (_NL_PAPER_WIDTH);]])],
	  [emacs_cv_langinfo__nl_paper_width=yes],
	  [emacs_cv_langinfo__nl_paper_width=no])
	])
      AS_IF([test "$emacs_cv_langinfo__nl_paper_width" = yes],
	[AC_DEFINE([HAVE_LANGINFO__NL_PAPER_WIDTH], [1],
	   [Define if you have <langinfo.h>
	    and nl_langinfo (_NL_PAPER_WIDTH).])])])])
EMACS_PAPER_WIDTH

AC_TYPE_MBSTATE_T

dnl Fixme: AC_SYS_POSIX_TERMIOS should probably be used, but it's not clear
dnl how the tty code is related to POSIX and/or other versions of termios.
dnl The following looks like a useful start.
dnl
dnl AC_SYS_POSIX_TERMIOS
dnl if test $ac_cv_sys_posix_termios = yes; then
dnl    AC_DEFINE([HAVE_TERMIOS], [1],
dnl      [Define to 1 if you have POSIX-style
dnl       functions and macros for terminal control.])
dnl    AC_DEFINE([HAVE_TCATTR], [1],
dnl      [Define to 1 if you have tcgetattr and tcsetattr.])
dnl fi

dnl Turned on June 1996 supposing nobody will mind it.
dnl MinGW emulates passwd database, so this feature doesn't make sense there.
if test "${opsys}" != "mingw32"; then
   AC_DEFINE([AMPERSAND_FULL_NAME], [1], [Define to use the convention that &
     in the full name stands for the login id.])
fi

dnl Everybody supports this, except MS.
dnl Seems like the kind of thing we should be testing for, though.
## Note: PTYs are broken on darwin <6.  Use at your own risk.
if test "${opsys}" != "mingw32"; then
  AC_DEFINE([HAVE_PTYS], [1], [Define if the system supports pty devices.])
fi

dnl Everybody supports this, except MS-DOS.
dnl Seems like the kind of thing we should be testing for, though.
AC_DEFINE([HAVE_SOCKETS], [1], [Define if the system supports
  4.2-compatible sockets.])

AH_TEMPLATE([INTERNAL_TERMINAL],
  [This is substituted when $TERM is "internal".])

AH_TEMPLATE([NULL_DEVICE], [Name of the file to open to get
  a null file, or a data sink.])
if test "${opsys}" = "mingw32"; then
  AC_DEFINE([NULL_DEVICE], ["NUL:"])
else
  AC_DEFINE([NULL_DEVICE], ["/dev/null"])
fi

if test "${opsys}" = "mingw32"; then
  SEPCHAR=';'
else
  SEPCHAR=':'
fi
AC_DEFINE_UNQUOTED([SEPCHAR], ['$SEPCHAR'],
  [Character that separates PATH elements.])
dnl This is for MinGW, and is used in test/Makefile.in.
dnl The MSYS Bash has heuristics for replacing ':' with ';' when it
dnl decides that a command-line argument to be passed to a MinGW program
dnl is a PATH-style list of directories.  But that heuristics plays it
dnl safe, and only does the replacement when it is _absolutely_ sure it
dnl sees a colon-separated list of file names; e.g. ":." is left alone,
dnl which breaks in-tree builds.  So we do this manually instead.
dnl Note that we cannot rely on PATH_SEPARATOR, as that one will always
dnl be computed as ':' in MSYS Bash.
AC_SUBST([SEPCHAR])

dnl Everybody supports this, except MS-DOS.
AC_DEFINE([subprocesses], [1], [Define to enable asynchronous subprocesses.])

AC_DEFINE([DIRECTORY_SEP], ['/'],
  [Character that separates directories in a file name.])

if test "${opsys}" = "mingw32"; then
  AC_DEFINE([IS_DEVICE_SEP(_c_)], [((_c_) == ':')],
    [Returns true if character is a device separator.])

  AC_DEFINE([IS_DIRECTORY_SEP(_c_)], [((_c_) == '/' || (_c_) == '\\')],
    [Returns true if character is a directory separator.])

  AC_DEFINE([IS_ANY_SEP(_c_)],
    [(IS_DIRECTORY_SEP (_c_) || IS_DEVICE_SEP (_c_))],
    [Returns true if character is any form of separator.])
else
  AC_DEFINE([IS_DEVICE_SEP(_c_)], 0,
    [Returns true if character is a device separator.])

  AC_DEFINE([IS_DIRECTORY_SEP(_c_)], [((_c_) == DIRECTORY_SEP)],
    [Returns true if character is a directory separator.])

  AC_DEFINE([IS_ANY_SEP(_c_)], [(IS_DIRECTORY_SEP (_c_))],
    [Returns true if character is any form of separator.])
fi

if test "$USE_X_TOOLKIT" != "none"; then
  have_editres=yes
  case $opsys in
    hpux*)
      dnl Assar Westerlund <assar@sics.se> says this is necessary
      dnl for HP-UX 10.20, and that it works for HP-UX 0 as well.
      have_editres=no
    ;;
  esac
  if test "$have_editres" != no && test ! -z "$LIBXMU"; then
    OLDLIBS="$LIBS"
    dnl See libXmu.a check above.
    if test x$HAVE_X11XTR6 = xyes; then
      LIBS="-lXt -lSM -lICE $LIBXMU"
    else
      OTHERLIBS="-lXt -$LIBXMU"
    fi
    AC_LINK_IFELSE([AC_LANG_PROGRAM(
      [[#include <X11/Intrinsic.h>
       #include <X11/Xmu/Editres.h>]],
      [[_XEditResCheckMessages (0, 0, 0, 0);]])],
      [AC_DEFINE([X_TOOLKIT_EDITRES], [1],
        [Define to 1 if we should use XEditRes.])])
    LIBS=$OLDLIBS
  fi
fi

case $opsys in
  solaris | unixware )
    dnl Some SVr4s don't define NSIG in sys/signal.h for ANSI environments;
    dnl instead, there's a system variable _sys_nsig.  Unfortunately, we
    dnl need the constant to dimension an array.  So wire in the appropriate
    dnl value here.
    AC_DEFINE([NSIG_MINIMUM], [32], [Minimum value of NSIG.])
    ;;
esac

emacs_broken_SIGIO=no

case $opsys in
  dnl SIGIO exists, but the feature doesn't work in the way Emacs needs.
  hpux* | nacl | solaris | unixware )
    emacs_broken_SIGIO=yes
    ;;

  aix4-2)
    dnl On AIX Emacs uses the gmalloc.c malloc implementation.  But given
    dnl the way this system works, libc functions that return malloced
    dnl memory use the libc malloc implementation. Calling xfree or
    dnl xrealloc on the results of such functions results in a crash.
    dnl
    dnl One solution for this could be to define SYSTEM_MALLOC in configure,
    dnl but that does not currently work on this system.
    dnl
    dnl It is possible to completely override the malloc implementation on
    dnl AIX, but that involves putting the malloc functions in a shared
    dnl library and setting the MALLOCTYPE environment variable to point to
    dnl that shared library.
    dnl
    dnl Emacs currently calls xrealloc on the results of get_current_dir name,
    dnl to avoid a crash just use the Emacs implementation for that function.
    dnl
    dnl FIXME We could change the AC_CHECK_FUNCS call near the start
    dnl of this file, so that we do not check for get_current_dir_name
    dnl on AIX.  But that might be fragile if something else ends
    dnl up testing for get_current_dir_name as a dependency.
    AC_DEFINE([BROKEN_GET_CURRENT_DIR_NAME], [1], [Define if
      get_current_dir_name should not be used.])
    ;;

  freebsd)
    dnl Circumvent a bug in FreeBSD.  In the following sequence of
    dnl writes/reads on a PTY, read(2) returns bogus data:
    dnl
    dnl write(2)  1022 bytes
    dnl write(2)   954 bytes, get EAGAIN
    dnl read(2)   1024 bytes in process_read_output
    dnl read(2)     11 bytes in process_read_output
    dnl
    dnl That is, read(2) returns more bytes than have ever been written
    dnl successfully.  The 1033 bytes read are the 1022 bytes written
    dnl successfully after processing (for example with CRs added if the
    dnl terminal is set up that way which it is here).  The same bytes will
    dnl be seen again in a later read(2), without the CRs.
    AC_DEFINE([BROKEN_PTY_READ_AFTER_EAGAIN], [1], [Define on FreeBSD to
      work around an issue when reading from a PTY.])
    ;;
esac

case $opsys in
  gnu-* | android | solaris | cygwin )
    dnl FIXME Can't we test if this exists (eg /proc/$$)?
    AC_DEFINE([HAVE_PROCFS], [1], [Define if you have the /proc filesystem.])
  ;;
esac

case $opsys in
  darwin | dragonfly | freebsd | netbsd | openbsd )
    AC_DEFINE([DONT_REOPEN_PTY], [1], [Define if process.c does not need to
      close a pty to make it a controlling terminal (it is already a
      controlling terminal of the subprocess, because we did ioctl TIOCSCTTY).])
  ;;
esac

dnl FIXME Surely we can test for this rather than hard-code it.
case $opsys in
  netbsd | openbsd) sound_device="/dev/audio" ;;
  *) sound_device="/dev/dsp" ;;
esac

dnl Used in sound.c
AC_DEFINE_UNQUOTED([DEFAULT_SOUND_DEVICE], ["$sound_device"],
  [Name of the default sound device.])


dnl Emacs can read input using SIGIO and buffering characters itself,
dnl or using CBREAK mode and making C-g cause SIGINT.
dnl The choice is controlled by the variable interrupt_input.
dnl
dnl Define INTERRUPT_INPUT to make interrupt_input = 1 the default (use SIGIO)
dnl
dnl Emacs uses the presence of the USABLE_SIGIO macro
dnl to indicate whether or not signal-driven I/O is possible.  It uses
dnl INTERRUPT_INPUT to decide whether to use it by default.
dnl
dnl SIGIO can be used only on systems that implement it (4.2 and 4.3).
dnl CBREAK mode has two disadvantages
dnl 1) At least in 4.2, it is impossible to handle the Meta key properly.
dnl I hear that in system V this problem does not exist.
dnl 2) Control-G causes output to be discarded.
dnl I do not know whether this can be fixed in system V.
dnl
dnl Another method of doing input is planned but not implemented.
dnl It would have Emacs fork off a separate process
dnl to read the input and send it to the true Emacs process
dnl through a pipe.
case $opsys in
  darwin | gnu-linux | gnu-kfreebsd)
    AC_DEFINE([INTERRUPT_INPUT], [1], [Define to read input using SIGIO.])
  ;;
esac


dnl If the system's imake configuration file defines 'NeedWidePrototypes'
dnl as 'NO', we must define NARROWPROTO manually.  Such a define is
dnl generated in the Makefile generated by 'xmkmf'.  If we don't define
dnl NARROWPROTO, we will see the wrong function prototypes for X functions
dnl taking float or double parameters.
case $opsys in
  cygwin|gnu|gnu-linux|gnu-kfreebsd|freebsd|netbsd|openbsd)
    AC_DEFINE([NARROWPROTO], [1], [Define if system's imake configuration
      file defines 'NeedWidePrototypes' as 'NO'.])
  ;;
esac


dnl Used in process.c, this must be a loop, even if it only runs once.
AH_TEMPLATE([PTY_ITERATION], [How to iterate over PTYs.])
dnl Only used if !PTY_ITERATION.  Iterate from FIRST_PTY_LETTER to z,
dnl trying suffixes 0-16.
AH_TEMPLATE([FIRST_PTY_LETTER], [Letter to use in finding device name of
  first PTY, if PTYs are supported.])
AH_TEMPLATE([PTY_OPEN], [How to open a PTY, if non-standard.])
AH_TEMPLATE([PTY_NAME_SPRINTF], [How to get the device name of the control
  end of a PTY, if non-standard.])
AH_TEMPLATE([PTY_TTY_NAME_SPRINTF], [How to get device name of the tty
  end of a PTY, if non-standard.])

case $opsys in
  aix4-2 )
    AC_DEFINE([PTY_ITERATION], [int c; for (c = 0; !c ; c++)])
    dnl You allocate a pty by opening /dev/ptc to get the master side.
    dnl To get the name of the slave side, you just ttyname() the master side.
    AC_DEFINE([PTY_NAME_SPRINTF], [strcpy (pty_name, "/dev/ptc");])
    AC_DEFINE([PTY_TTY_NAME_SPRINTF], [strcpy (pty_name, ttyname (fd));])
    ;;

  cygwin )
    AC_DEFINE([PTY_ITERATION], [int i; for (i = 0; i < 1; i++)])
    dnl multi-line AC_DEFINEs are hard. :(
    AC_DEFINE([PTY_OPEN],
      [ do { int dummy; sigset_t blocked, procmask; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, &procmask); if (-1 == openpty (&fd, &dummy, pty_name, 0, 0)) fd = -1; pthread_sigmask (SIG_SETMASK, &procmask, 0); if (fd >= 0) emacs_close (dummy); } while (false)])
    AC_DEFINE([PTY_NAME_SPRINTF], [])
    AC_DEFINE([PTY_TTY_NAME_SPRINTF], [])
    ;;

  gnu | qnxnto )
    AC_DEFINE([FIRST_PTY_LETTER], ['p'])
    ;;

  android )
    AC_DEFINE([PTY_ITERATION], [int i; for (i = 0; i < 1; ++i)])
    dnl grantpt may be defined in libc but not declared.  The same
    dnl goes for posix_openpt.  When that is the case, it means that
    dnl grantpt or posix_openpt cannot actually be used.
    AC_CHECK_DECLS([grantpt, posix_openpt])
    AS_IF([test "x$ac_cv_have_decl_grantpt" = xyes],
      [AC_DEFINE([PTY_TTY_NAME_SPRINTF],
        [{ char *ptyname = 0; sigset_t blocked; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, 0); if (grantpt (fd) != -1 && unlockpt (fd) != -1) ptyname = ptsname(fd); pthread_sigmask (SIG_UNBLOCK, &blocked, 0); if (!ptyname) { emacs_close (fd); return -1; } snprintf (pty_name, PTY_NAME_SIZE, "%s", ptyname); }])],
      [AC_DEFINE([PTY_TTY_NAME_SPRINTF],
        [{ char *ptyname = 0; sigset_t blocked; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, 0); if (unlockpt (fd) != -1) ptyname = ptsname(fd); pthread_sigmask (SIG_UNBLOCK, &blocked, 0); if (!ptyname) { emacs_close (fd); return -1; } snprintf (pty_name, PTY_NAME_SIZE, "%s", ptyname); }])])
    AS_IF([test "x$ac_cv_have_decl_posix_openpt" = xyes],
      [AC_DEFINE([PTY_OPEN],
        [do { fd = posix_openpt (O_RDWR | O_CLOEXEC | O_NOCTTY); if (fd < 0 && errno == EINVAL) fd = posix_openpt (O_RDWR | O_NOCTTY); } while (false)])
       AC_DEFINE([PTY_NAME_SPRINTF], [])],
      [AC_DEFINE([PTY_NAME_SPRINTF], [])
       AC_DEFINE([PTY_OPEN], [fd = getpt ()])])
    ;;

  gnu-linux | gnu-kfreebsd | dragonfly | freebsd | openbsd | netbsd | darwin | nacl )
    dnl if HAVE_GRANTPT
    if test "x$ac_cv_func_grantpt" = xyes; then
      AC_DEFINE([UNIX98_PTYS], [1], [Define if the system has Unix98 PTYs.])
      AC_DEFINE([PTY_ITERATION], [int i; for (i = 0; i < 1; i++)])
      dnl Note that grantpt and unlockpt may fork.  We must block SIGCHLD
      dnl to prevent sigchld_handler from intercepting the child's death.
      AC_DEFINE([PTY_TTY_NAME_SPRINTF],
	[{ char *ptyname = 0; sigset_t blocked; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, 0); if (grantpt (fd) != -1 && unlockpt (fd) != -1) ptyname = ptsname(fd); pthread_sigmask (SIG_UNBLOCK, &blocked, 0); if (!ptyname) { emacs_close (fd); return -1; } snprintf (pty_name, PTY_NAME_SIZE, "%s", ptyname); }])
      dnl if HAVE_POSIX_OPENPT
      if test "x$ac_cv_func_posix_openpt" = xyes; then
	AC_DEFINE([PTY_OPEN],
	  [do { fd = posix_openpt (O_RDWR | O_CLOEXEC | O_NOCTTY); if (fd < 0 && errno == EINVAL) fd = posix_openpt (O_RDWR | O_NOCTTY); } while (false)])
	AC_DEFINE([PTY_NAME_SPRINTF], [])
      dnl if HAVE_GETPT
      elif test "x$ac_cv_func_getpt" = xyes; then
	AC_DEFINE([PTY_OPEN], [fd = getpt ()])
	AC_DEFINE([PTY_NAME_SPRINTF], [])
      else
	AC_DEFINE([PTY_NAME_SPRINTF], [strcpy (pty_name, "/dev/ptmx");])
      fi
    else
      AC_DEFINE([FIRST_PTY_LETTER], ['p'])
    fi
    ;;

  hpux*)
    AC_DEFINE([FIRST_PTY_LETTER], ['p'])
    AC_DEFINE([PTY_NAME_SPRINTF],
      [sprintf (pty_name, "/dev/ptym/pty%c%x", c, i);])
    AC_DEFINE([PTY_TTY_NAME_SPRINTF],
      [sprintf (pty_name, "/dev/pty/tty%c%x", c, i);])
    ;;

  solaris )
    dnl On SysVr4, grantpt(3) forks a subprocess, so do not use
    dnl O_CLOEXEC when opening the pty, and keep the SIGCHLD handler
    dnl from intercepting that death.  If any child but grantpt's should die
    dnl within, it should be caught after sigrelse(2).
    AC_DEFINE([PTY_OPEN], [fd = open (pty_name, O_RDWR | O_NONBLOCK)])
    AC_DEFINE([PTY_TTY_NAME_SPRINTF],
      [{ char *ptsname (int), *ptyname; int grantpt_result; sigset_t blocked; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, 0); grantpt_result = grantpt (fd); pthread_sigmask (SIG_UNBLOCK, &blocked, 0); if (grantpt_result == -1 || unlockpt (fd) == -1 || !(ptyname = ptsname (fd))) { emacs_close (fd); return -1; } snprintf (pty_name, PTY_NAME_SIZE, "%s", ptyname); }])
    ;;

  unixware )
    dnl Comments are as per solaris.
    AC_DEFINE([PTY_OPEN], [fd = open (pty_name, O_RDWR | O_NONBLOCK)])
    AC_DEFINE([PTY_TTY_NAME_SPRINTF],
      [{ char *ptsname (int), *ptyname; int grantpt_result; sigset_t blocked; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, 0); grantpt_result = grantpt (fd); pthread_sigmask (SIG_UNBLOCK, &blocked, 0); if (grantpt_result == -1) fatal("could not grant slave pty"); if (unlockpt(fd) == -1) fatal("could not unlock slave pty"); if (!(ptyname = ptsname(fd))) fatal ("could not enable slave pty"); snprintf (pty_name, PTY_NAME_SIZE, "%s", ptyname); }])
    ;;

  haiku*)
    AC_DEFINE([FIRST_PTY_LETTER], ['s'])
    AC_DEFINE([PTY_NAME_SPRINTF], [])
    dnl on Haiku pty names aren't distinctive, thus the use of posix_openpt
    AC_DEFINE([PTY_OPEN], [fd = posix_openpt (O_RDWR | O_NONBLOCK)])
    AC_DEFINE([PTY_TTY_NAME_SPRINTF],
      [{ char *ptyname; int grantpt_result; sigset_t blocked; sigemptyset (&blocked); sigaddset (&blocked, SIGCHLD); pthread_sigmask (SIG_BLOCK, &blocked, 0); grantpt_result = grantpt (fd); pthread_sigmask (SIG_UNBLOCK, &blocked, 0); if (grantpt_result == -1) fatal("could not grant slave pty"); if (unlockpt(fd) == -1) fatal("could not unlock slave pty"); if (!(ptyname = ptsname(fd))) fatal ("could not enable slave pty"); snprintf (pty_name, PTY_NAME_SIZE, "%s", ptyname); }])
    ;;
esac


case $opsys in
  solaris | unixware )
    dnl This change means that we don't loop through allocate_pty too
    dnl many times in the (rare) event of a failure.
    AC_DEFINE([FIRST_PTY_LETTER], ['z'])
    AC_DEFINE([PTY_NAME_SPRINTF], [strcpy (pty_name, "/dev/ptmx");])
    dnl Push various streams modules onto a PTY channel.  Used in process.c.
    AC_DEFINE([SETUP_SLAVE_PTY],
      [if (ioctl (std_in, I_PUSH, "ptem") == -1) fatal ("ioctl I_PUSH ptem"); if (ioctl (std_in, I_PUSH, "ldterm") == -1) fatal ("ioctl I_PUSH ldterm"); if (ioctl (std_in, I_PUSH, "ttcompat") == -1) fatal ("ioctl I_PUSH ttcompat");], [How to set up a slave PTY, if needed.])
    ;;
esac


AH_TEMPLATE([SIGNALS_VIA_CHARACTERS], [Make process_send_signal work by
"typing" a signal character on the pty.])

case $opsys in
  dnl Perry Smith <pedz@ddivt1.austin.ibm.com> says this is correct for AIX.
  aix4-2 | cygwin | gnu | dragonfly | freebsd | netbsd | openbsd | darwin )
    AC_DEFINE([SIGNALS_VIA_CHARACTERS], [1])
    ;;

  dnl 21 Jun 06: Eric Hanchrow <offby1@blarg.net> says this works.
  dnl FIXME Does gnu-kfreebsd have linux/version.h?  It seems unlikely...
  gnu-linux | gnu-kfreebsd )

    AC_CACHE_CHECK([for signals via characters], [emacs_cv_signals_via_chars],
    [AC_PREPROC_IFELSE([AC_LANG_PROGRAM([[
#include <linux/version.h>
#if LINUX_VERSION_CODE < 0x20400
# error "Linux version too old"
#endif
      ]], [[]])],
	[emacs_cv_signals_via_chars=yes],
	[emacs_cv_signals_via_chars=no])])

    test "$emacs_cv_signals_via_chars" = yes &&
      AC_DEFINE([SIGNALS_VIA_CHARACTERS], [1])
    ;;
esac


AH_TEMPLATE([TAB3], [Undocumented.])

case $opsys in
  darwin) AC_DEFINE([TAB3], [OXTABS]) ;;

  gnu | dragonfly | freebsd | netbsd | openbsd )
    AC_DEFINE([TABDLY], [OXTABS], [Undocumented.])
    AC_DEFINE([TAB3], [OXTABS])
    ;;

  gnu-linux | gnu-kfreebsd )
    AC_PREPROC_IFELSE(
      [AC_LANG_PROGRAM(
	 [[
#ifndef __ia64__
# error "not ia64"
#endif
	 ]], [[]])],
      [AC_DEFINE([GC_MARK_SECONDARY_STACK()],
        [do { extern void *__libc_ia64_register_backing_store_base; __builtin_ia64_flushrs (); mark_memory (__libc_ia64_register_backing_store_base, __builtin_ia64_bsp ());} while (false)],
	[Mark a secondary stack, like the register stack on the ia64.])], [])
    ;;

  hpux*)
    AC_DEFINE([RUN_TIME_REMAP], [1], [Define if emacs.c needs to call
      run_time_remap; for HPUX.])
    ;;
esac


dnl This won't be used automatically yet.  We also need to know, at least,
dnl that the stack is continuous.
AH_TEMPLATE([GC_SETJMP_WORKS], [Define if setjmp is known to save all
  registers relevant for conservative garbage collection in the jmp_buf.])


case $opsys in
  dnl Not all the architectures are tested, but there are Debian packages
  dnl for SCM and/or Guile on them, so the technique must work.  See also
  dnl comments in alloc.c concerning setjmp and gcc.
  dnl Fixme: it's probably safe to just use the GCC conditional below.
  gnu-linux | gnu-kfreebsd )
    AC_PREPROC_IFELSE([AC_LANG_PROGRAM([[
#if defined __i386__ || defined __sparc__ || defined __mc68000__ \
  || defined __alpha__ || defined __mips__ || defined __s390__ \
  || defined __arm__ || defined __powerpc__ || defined __amd64__ \
  || defined __x86_64__ \
  || defined __ia64__ || defined __sh__
/* ok */
#else
# error "setjmp not known to work on this arch"
#endif
    ]], [[]])], [AC_DEFINE([GC_SETJMP_WORKS], [1])])
    ;;
esac


if test x$GCC = xyes; then
   dnl GC_SETJMP_WORKS is nearly always appropriate for GCC.
   AC_DEFINE([GC_SETJMP_WORKS], [1])
else
  case $opsys in
    aix* | dragonfly | freebsd | netbsd | openbsd | solaris )
      AC_DEFINE([GC_SETJMP_WORKS], [1])
      ;;
  esac
fi                              dnl GCC?

dnl In a weird quirk, MS runtime uses _setjmp and longjmp.
AC_CACHE_CHECK([for _setjmp], [emacs_cv_func__setjmp],
  [AC_LINK_IFELSE(
     [AC_LANG_PROGRAM(
       [[#include <setjmp.h>
         #ifdef __MINGW32__
         # define _longjmp longjmp
         #endif
       ]],
       [[jmp_buf j;
	 if (! _setjmp (j))
	   _longjmp (j, 1);]])],
     [emacs_cv_func__setjmp=yes],
     [emacs_cv_func__setjmp=no])])
if test $emacs_cv_func__setjmp = yes; then
  AC_DEFINE([HAVE__SETJMP], [1], [Define to 1 if _setjmp and _longjmp work.])
fi

# We need to preserve signal mask to handle C stack overflows.
AC_CACHE_CHECK([for sigsetjmp], [emacs_cv_func_sigsetjmp],
  [AC_LINK_IFELSE(
     [AC_LANG_PROGRAM(
       [[#include <setjmp.h>
       ]],
       [[sigjmp_buf j;
         if (! sigsetjmp (j, 1))
	   siglongjmp (j, 1);]])],
     [emacs_cv_func_sigsetjmp=yes],
     [emacs_cv_func_sigsetjmp=no])])
if test $emacs_cv_func_sigsetjmp = yes; then
  AC_DEFINE([HAVE_SIGSETJMP], [1],
    [Define to 1 if sigsetjmp and siglongjmp work.])
fi

case $emacs_cv_func_sigsetjmp,$emacs_cv_alternate_stack,$opsys in
  yes,yes,* | *,*,mingw32)
    AC_DEFINE([HAVE_STACK_OVERFLOW_HANDLING], [1],
      [Define to 1 if C stack overflow can be handled in some cases.]);;
esac

case $opsys in
  solaris | unixware )
    dnl TIOCGPGRP is broken in SysVr4, so we can't send signals to PTY
    dnl subprocesses the usual way.  But TIOCSIGNAL does work for PTYs,
    dnl and this is all we need.
    AC_DEFINE([TIOCSIGSEND], [TIOCSIGNAL], [Some platforms redefine this.])
    ;;
esac


case $opsys in
  hpux* | solaris )
    dnl Used in xfaces.c.
    AC_DEFINE([XOS_NEEDS_TIME_H], [1], [Compensate for a bug in Xos.h on
      some systems, where it requires time.h.])
    ;;
esac


dnl Define symbols to identify the version of Unix this is.
dnl Define all the symbols that apply correctly.
AH_TEMPLATE([DOS_NT], [Define if the system is MS DOS or MS Windows.])
AH_TEMPLATE([MSDOS], [Define if the system is MS DOS.])
AH_TEMPLATE([USG], [Define if the system is compatible with System III.])
AH_TEMPLATE([USG5_4],
  [Define if the system is compatible with System V Release 4.])

case $opsys in
  aix4-2)
    AC_DEFINE([USG], [])
    dnl This symbol should be defined on AIX Version 3  ???????
    AC_PREPROC_IFELSE([AC_LANG_PROGRAM([[
#ifndef _AIX
# error "_AIX not defined"
#endif
    ]], [[]])], [], [AC_DEFINE([_AIX], [], [Define if the system is AIX.])])
    ;;

  cygwin)
    AC_DEFINE([CYGWIN], [1], [Define if the system is Cygwin.])
    ;;

  darwin)
    dnl Not __APPLE__, as this may not be defined on non-macOS Darwin.
    dnl Not DARWIN, because Panther and lower CoreFoundation.h use DARWIN to
    dnl distinguish macOS from pure Darwin.
    AC_DEFINE([DARWIN_OS], [], [Define if the system is Darwin.])
    ;;

  gnu-linux | gnu-kfreebsd )
    AC_DEFINE([USG], [])
    AC_DEFINE([GNU_LINUX], [],
      [Define if this system is compatible with GNU/Linux.])
    ;;

  hpux*)
    AC_DEFINE([USG], [])
    AC_DEFINE([HPUX], [], [Define if the system is HPUX.])
    ;;

  mingw32)
    AC_DEFINE([DOS_NT], [])
    AC_DEFINE([WINDOWSNT], [1], [Define if compiling for native MS Windows.])
    if test "x$ac_enable_checking" != "x" ; then
      AC_DEFINE([EMACSDEBUG], [1],
	[Define to 1 to enable w32 debug facilities.])
    fi
    ;;

  solaris)
    AC_DEFINE([USG], [])
    AC_DEFINE([USG5_4], [])
    AC_DEFINE([SOLARIS2], [], [Define if the system is Solaris.])
    ;;

  unixware)
    AC_DEFINE([USG], [])
    AC_DEFINE([USG5_4], [])
    ;;

  haiku)
    AC_DEFINE([HAIKU], [], [Define if the system is Haiku.])
    ;;
esac

AC_SYS_POSIX_TERMIOS
if test $ac_cv_sys_posix_termios = yes; then
  AC_CHECK_SIZEOF([speed_t], [], [#include <termios.h>])
  dnl on Haiku, and possibly other platforms, speed_t is defined to
  dnl unsigned char, even when speeds greater than 200 baud are
  dnl defined.

  if test ${ac_cv_sizeof_speed_t} -lt 2; then
    AC_DEFINE([HAVE_TINY_SPEED_T], [1],
        [Define to 1 if speed_t has some sort of nonsensically tiny size.])
  fi
fi

AC_CACHE_CHECK([for usable FIONREAD], [emacs_cv_usable_FIONREAD],
  [case $opsys in
     aix4-2 | nacl)
       dnl BUILD 9008 - FIONREAD problem still exists in X-Windows.
       emacs_cv_usable_FIONREAD=no
       ;;

     mingw32)
       emacs_cv_usable_FIONREAD=yes
       ;;

     *)
       AC_COMPILE_IFELSE(
	 [AC_LANG_PROGRAM([[#include <sys/types.h>
			    #include <sys/ioctl.h>
			    #ifdef USG5_4
			    # include <sys/filio.h>
			    #endif
			    #ifdef HAVE_UNISTD_H
			    # include <unistd.h> /* defines ioctl() on Solaris */
			    #endif
			  ]],
			  [[int foo = ioctl (0, FIONREAD, &foo);]])],
	 [emacs_cv_usable_FIONREAD=yes],
	 [emacs_cv_usable_FIONREAD=no])
       ;;
   esac])
if test $emacs_cv_usable_FIONREAD = yes; then
  AC_DEFINE([USABLE_FIONREAD], [1], [Define to 1 if FIONREAD is usable.])

  if test $emacs_broken_SIGIO = no; then
    AC_CACHE_CHECK([for usable SIGIO], [emacs_cv_usable_SIGIO],
      [AC_COMPILE_IFELSE(
	 [AC_LANG_PROGRAM([[#include <fcntl.h>
			    #include <signal.h>
			  ]],
			  [[int foo = SIGIO | F_SETFL | FASYNC;]])],
	 [emacs_cv_usable_SIGIO=yes],
	 [emacs_cv_usable_SIGIO=no])],
      [emacs_cv_usable_SIGIO=yes],
      [emacs_cv_usable_SIGIO=no])
    if test $emacs_cv_usable_SIGIO = yes; then
      AC_DEFINE([USABLE_SIGIO], [1], [Define to 1 if SIGIO is usable.])
    fi
  fi

  if test $emacs_broken_SIGIO = no && test $emacs_cv_usable_SIGIO = no; then
    AC_CACHE_CHECK([for usable SIGPOLL], [emacs_cv_usable_SIGPOLL],
      [AC_COMPILE_IFELSE(
	 [AC_LANG_PROGRAM([[#include <fcntl.h>
			    #include <signal.h>
			  ]],
			  [[int foo = SIGPOLL | F_SETFL;]])],
	 [emacs_cv_usable_SIGPOLL=yes],
	 [emacs_cv_usable_SIGPOLL=no])],
      [emacs_cv_usable_SIGPOLL=yes],
      [emacs_cv_usable_SIGPOLL=no])
    if test $emacs_cv_usable_SIGPOLL = yes; then
      AC_DEFINE([USABLE_SIGPOLL], [1], [Define to 1 if SIGPOLL is usable but SIGIO is not.])
    fi
  fi
fi

case $opsys in
  hpux11)
    dnl It works to open the pty's tty in the parent (Emacs), then
    dnl close and reopen it in the child.
    AC_DEFINE([USG_SUBTTY_WORKS], [1], [Define for USG systems where it
      works to open a pty's tty in the parent process, then close and
      reopen it in the child.])
    ;;

  solaris)
    AC_DEFINE([_STRUCTURED_PROC], [1], [Needed for system_process_attributes
      on Solaris.])
    ;;
esac

# Set up the CFLAGS for real compilation, so we can substitute it.
CFLAGS="$REAL_CFLAGS"
CPPFLAGS="$REAL_CPPFLAGS"
LIBS="$REAL_LIBS"

## Hack to detect a buggy GCC version.
if test "$GCC" = yes && \
   $CC --version 2> /dev/null | grep 'gcc.* 4.5.0' >/dev/null; then
  case $CFLAGS in
    *-fno-optimize-sibling-calls*) ;;
    *-O@<:@23@:>@*)
      AC_MSG_ERROR([GCC 4.5.0 has problems compiling Emacs; see etc/PROBLEMS.]);;
  esac
fi

version=$PACKAGE_VERSION

copyright="Copyright (C) 2026 Free Software Foundation, Inc."
AC_DEFINE_UNQUOTED([COPYRIGHT], ["$copyright"],
  [Short copyright string for this version of Emacs.])
AC_SUBST([copyright])

### Specify what sort of things we'll be editing into Makefile and config.h.
### Use configuration here uncanonicalized to avoid exceeding size limits.
AC_SUBST([version])
AC_SUBST([configuration])
## Unused?
AC_SUBST([canonical])
AC_SUBST([srcdir])
AC_SUBST([prefix])
AC_SUBST([exec_prefix])
AC_SUBST([bindir])
AC_SUBST([datadir])
AC_SUBST([gsettingsschemadir])
AC_SUBST([sharedstatedir])
AC_SUBST([libexecdir])
AC_SUBST([mandir])
AC_SUBST([infodir])
AC_SUBST([lispdirrel])
AC_SUBST([lispdir])
AC_SUBST([standardlisppath])
AC_SUBST([locallisppath])
AC_SUBST([lisppath])
AC_SUBST([x_default_search_path])
AC_SUBST([etcdir])
AC_SUBST([archlibdir])
AC_SUBST([etcdocdir])
AC_SUBST([bitmapdir])
AC_SUBST([gamedir])
AC_SUBST([gameuser])
AC_SUBST([gamegroup])
## FIXME? Nothing uses @LD_SWITCH_X_SITE@.
## src/Makefile.in did add LD_SWITCH_X_SITE (as a cpp define) to the
## end of LIBX_BASE, but nothing ever set it.
AC_SUBST([LD_SWITCH_X_SITE])
AC_SUBST([C_SWITCH_X_SITE])
AC_SUBST([GNUSTEP_CFLAGS])
AC_SUBST([CFLAGS])
## Used in lwlib/Makefile.in.
AC_SUBST([X_TOOLKIT_TYPE])
AC_SUBST([ns_appdir])
AC_SUBST([ns_appbindir])
AC_SUBST([ns_applibexecdir])
AC_SUBST([ns_applibdir])
AC_SUBST([ns_appresdir])
AC_SUBST([ns_appsrc])
AC_SUBST([GNU_OBJC_CFLAGS])
AC_SUBST([OTHER_FILES])

AS_IF([test $prefix = "NONE"], [_prefix=/usr/local], [_prefix=$prefix])
AC_DEFINE_UNQUOTED([BINDIR], ["${_prefix}/bin/"], [Executables directory.])

if test -n "${term_header}"; then
    AC_DEFINE_UNQUOTED([TERM_HEADER], ["${term_header}"],
        [Define to the header for the built-in window system.])
fi

AC_DEFINE_UNQUOTED([EMACS_CONFIGURATION],  ["${canonical}"],
		   [Define to the canonical Emacs configuration name.])
AC_DEFINE_UNQUOTED([EMACS_CONFIG_OPTIONS], "${emacs_config_options}",
		   [Define to the options passed to configure.])

XMENU_OBJ=
XOBJ=
FONT_OBJ=
if test "${HAVE_X_WINDOWS}" = "yes" ; then
  AC_DEFINE([HAVE_X_WINDOWS], [1],
	    [Define to 1 if you want to use the X window system.])
  XMENU_OBJ=xmenu.o
  XOBJ="xterm.o xfns.o xselect.o xrdb.o xsmfns.o xsettings.o"
  FONT_OBJ=xfont.o
  if test "$HAVE_CAIRO" = "yes"; then
    FONT_OBJ="$FONT_OBJ ftfont.o ftcrfont.o"
  elif test "$HAVE_XFT" = "yes"; then
    FONT_OBJ="$FONT_OBJ ftfont.o xftfont.o"
  elif test "$HAVE_FREETYPE" = "yes"; then
    FONT_OBJ="$FONT_OBJ ftfont.o"
  fi
fi

if test "${window_system}" = "pgtk"; then
   FONT_OBJ="ftfont.o ftcrfont.o"
fi

if test "${HAVE_BE_APP}" = "yes" ; then
  if test "${HAVE_CAIRO}" = "yes"; then
    FONT_OBJ="$FONT_OBJ ftfont.o ftcrfont.o"
  fi
fi

if test "${HAVE_HARFBUZZ}" = "yes" ; then
  FONT_OBJ="$FONT_OBJ hbfont.o"
fi
AC_SUBST([FONT_OBJ])
AC_SUBST([XMENU_OBJ])
AC_SUBST([XOBJ])
AC_SUBST([FONT_OBJ])

WIDGET_OBJ=
MOTIF_LIBW=
if test "${USE_X_TOOLKIT}" != "none" ; then
  WIDGET_OBJ=widget.o
  AC_DEFINE([USE_X_TOOLKIT], [1], [Define to 1 if using an X toolkit.])
  if test "${USE_X_TOOLKIT}" = "LUCID"; then
    AC_DEFINE([USE_LUCID], [1], [Define to 1 if using the Lucid X toolkit.])
  elif test "${USE_X_TOOLKIT}" = "MOTIF"; then
    AC_DEFINE([USE_MOTIF], [1], [Define to 1 if using the Motif X toolkit.])
    MOTIF_LIBW=-lXm
    case "$opsys" in
      gnu-linux)
        ## Paul Abrahams <abrahams at equinox.shaysnet.com> says this is needed.
        MOTIF_LIBW="$MOTIF_LIBW -lXpm"
        ;;

      unixware)
        ## Richard Anthony Ryan <ryanr at ellingtn.ftc.nrcs.usda.gov>
        ## says -lXimp is needed in UNIX_SV ... 4.2 1.1.2.
        MOTIF_LIBW="MOTIF_LIBW -lXimp"
        ;;

      aix4-2)
        ## olson@mcs.anl.gov says -li18n is needed by -lXm.
        MOTIF_LIBW="$MOTIF_LIBW -li18n"
        ;;
    esac
    MOTIF_LIBW="$MOTIF_LIBW $LIBXP"
  fi
fi
AC_SUBST([WIDGET_OBJ])

TOOLKIT_LIBW=
case "$USE_X_TOOLKIT" in
  MOTIF) TOOLKIT_LIBW="$MOTIF_LIBW" ;;
  LUCID) TOOLKIT_LIBW="$LUCID_LIBW" ;;
  none) test "x$HAVE_GTK" = "xyes" && TOOLKIT_LIBW="$GTK_LIBS" ;;
esac
if test "$HAVE_XWIDGETS" = "yes"; then
  TOOLKIT_LIBW="$TOOLKIT_LIBW -lXcomposite"
fi
AC_SUBST([TOOLKIT_LIBW])

if test "${opsys}" != "mingw32"; then
  if test "$USE_X_TOOLKIT" = "none"; then
    LIBXT_OTHER="\$(LIBXSM)"
  else
    LIBXT_OTHER="\$(LIBXMU) -lXt \$(LIBXTR6) -lXext"
  fi
fi
AC_SUBST([LIBXT_OTHER])

if test "${HAVE_X11}" = "yes" ; then
  AC_DEFINE([HAVE_X11], [1],
	    [Define to 1 if you want to use version 11 of X windows.])
  LIBX_OTHER="\$(LIBXT) \$(LIBX_EXTRA)"
else
  LIBX_OTHER=
fi
AC_SUBST([LIBX_OTHER])

HAVE_OLDXMENU=no
if test "$HAVE_GTK" = yes || test "$HAVE_X11" != yes; then
  LIBXMENU=
elif test "$USE_X_TOOLKIT" = none; then
  HAVE_OLDXMENU=yes
  LIBXMENU='$(oldXMenudir)/libXMenu11.a'
  AUTODEPEND_PARENTS="$AUTODEPEND_PARENTS oldXMenu"
else
  LIBXMENU='$(lwlibdir)/liblw.a'
  AUTODEPEND_PARENTS="$AUTODEPEND_PARENTS lwlib"
fi
AC_SUBST([LIBXMENU])

AC_C_RESTRICT
AC_C_TYPEOF

AC_CACHE_CHECK([for statement expressions],
  [emacs_cv_statement_expressions],
  [AC_COMPILE_IFELSE(
     [AC_LANG_PROGRAM([], [[return ({ int x = 5; x-x; });]])],
     [emacs_cv_statement_expressions=yes],
     [emacs_cv_statement_expressions=no])])
if test "$emacs_cv_statement_expressions" = yes; then
  AC_DEFINE([HAVE_STATEMENT_EXPRESSIONS], [1],
    [Define to 1 if statement expressions work.])
fi

if test "${GNU_MALLOC}" = "yes" ; then
  AC_DEFINE([GNU_MALLOC], [1],
	    [Define to 1 if you want to use the GNU memory allocator.])
fi

RALLOC_OBJ=
if test "${REL_ALLOC}" = "yes" ; then
  AC_DEFINE([REL_ALLOC], [1],
	    [Define REL_ALLOC if you want to use the relocating allocator for
	     buffer space.])

  test "$system_malloc" != "yes" && RALLOC_OBJ=ralloc.o
fi
AC_SUBST([RALLOC_OBJ])

if test "$opsys" = "cygwin"; then
  CYGWIN_OBJ="cygw32.o"
else
  CYGWIN_OBJ=
fi
AC_SUBST([CYGWIN_OBJ])

dnl Call this 'FORTIFY_SOUR' so that it sorts before the 'FORTIFY_SOURCE'
dnl verbatim defined above.  The tricky name is apropos, as this hack
dnl makes Fortify go sour!
AH_VERBATIM([FORTIFY_SOUR],
[/* Without the following workaround, Emacs runs slowly on OS X 10.8.
   The workaround disables some useful run-time checking, so it
   should be conditional to the platforms with the performance bug.
   Perhaps Apple will fix this some day; also see m4/extern-inline.m4.  */
#if defined __APPLE__ && defined __GNUC__
# ifndef _DONT_USE_CTYPE_INLINE_
#  define _DONT_USE_CTYPE_INLINE_
# endif
# ifndef _FORTIFY_SOURCE
#  define _FORTIFY_SOURCE 0
# endif
#endif
])

# If user asks to omit features, disable optional features that gnulib
# might otherwise enable.
if test "$with_features" = no && test "$enable_acl" != yes; then
  enable_acl=no
fi

# Configure gnulib.  Although this does not affect CFLAGS or LIBS permanently,
# it temporarily reverts them to their pre-pkg-config values,
# because gnulib needs to work with both src (which uses the
# pkg-config stuff) and lib-src (which does not).  For example, gnulib
# may need to determine whether CLOCK_TIME_LIB should contain -lrt,
# and it therefore needs to run in an environment where LIBS does not
# already contain -lrt merely because 'pkg-config --libs' printed '-lrt'
# for some package unrelated to lib-src.
SAVE_CFLAGS=$CFLAGS
SAVE_LIBS=$LIBS
CFLAGS=$pre_PKG_CONFIG_CFLAGS
LIBS="$LIB_PTHREAD $pre_PKG_CONFIG_LIBS"
gl_ASSERT_NO_GNULIB_POSIXCHECK
gl_ASSERT_NO_GNULIB_TESTS
gl_INIT
CFLAGS=$SAVE_CFLAGS
LIBS=$SAVE_LIBS

# Set up libgmp on Android.  Make sure to override what gnulib has
# found.
LIBGMP_CFLAGS=
if test "$REALLY_ANDROID" = "yes" && test "$with_libgmp" != "no"; then
  HAVE_LIBGMP=no
  ndk_SEARCH_MODULE([libgmp], [LIBGMP], [HAVE_LIBGMP=yes])

  if test "$HAVE_LIBGMP" = "yes"; then
    SAVE_CFLAGS="$CFLAGS"
    CFLAGS="$CFLAGS $LIBGMP_CFLAGS"
    unset ac_cv_header_gmp_h
    unset ac_cv_header_gmp_gmp_h
    AC_CHECK_HEADERS([gmp.h gmp/gmp.h], [break])
    CFLAGS="$SAVE_CFLAGS"
    GL_GENERATE_GMP_H=
    GL_GENERATE_GMP_H_CONDITION=
    GL_GENERATE_GMP_GMP_H=
    GL_GENERATE_GMP_GMP_H_CONDITION=
    GL_GENERATE_MINI_GMP_H=
    GL_GENERATE_MINI_GMP_H_CONDITION=

    if test "$ac_cv_header_gmp_h" != "no" \
       || test "$ac_cv_header_gmp_gmp_h" != "no"; then
       HAVE_LIBGMP=yes
       GL_GENERATE_GMP_H=false
       LIBGMP="$LIBGMP_LIBS"
       GMP_H=
    fi
  fi
fi
AC_SUBST([LIBGMP_CFLAGS])

dnl SELinux is available for Linux kernel based systems only.
dnl These include GNU/Linux and Android.
dnl Configure SELinux after configuring Gnulib, which adjusts with_selinux.
HAVE_LIBSELINUX=no
LIBSELINUX_LIBS=
LIBSELINUX_CFLAGS=
if test "${with_selinux}" = "yes"; then
   if test "$REALLY_ANDROID" = "yes"; then
     ndk_SEARCH_MODULE([libselinux], [LIBSELINUX],
       [HAVE_LIBSELINUX=yes])
   else
     AC_CHECK_LIB([selinux], [lgetfilecon],
       [HAVE_LIBSELINUX=yes],
       [HAVE_LIBSELINUX=no])
   fi
   if test "$HAVE_LIBSELINUX" = yes; then
      AC_DEFINE([HAVE_LIBSELINUX], [1], [Define to 1 if using SELinux.])
      if test "$REALLY_ANDROID" != "yes"; then
        LIBSELINUX_LIBS=-lselinux
      fi
   fi
fi
AC_SUBST([LIBSELINUX_LIBS])
AC_SUBST([LIBSELINUX_CFLAGS])

# timer_getoverrun needs the same library as timer_settime
OLD_LIBS=$LIBS
LIBS="$LIB_TIMER_TIME $LIBS"
AC_CHECK_FUNCS([timer_getoverrun])
LIBS=$OLD_LIBS

if test "${opsys}" = "mingw32"; then
  CPPFLAGS="$CPPFLAGS -DUSE_CRT_DLL=1 -I \${abs_top_srcdir}/nt/inc"
  # Remove unneeded switches from the value of CC that goes to Makefiles
  CC=`AS_ECHO(["$CC"]) | sed -e "s,$GCC_TEST_OPTIONS,,"`
fi

case "$opsys" in
  aix4-2) LD_SWITCH_SYSTEM_TEMACS="-Wl,-bnodelcsect" ;;

  cygwin) LD_SWITCH_SYSTEM_TEMACS="-Wl,-stack,0x00800000" ;;

  darwin)
   if test "$HAVE_NS" = "yes"; then
     libs_nsgui="-framework AppKit"
     if test "$NS_IMPL_COCOA" = "yes"; then
        libs_nsgui="$libs_nsgui -framework IOKit -framework Carbon \
                    -framework IOSurface -framework QuartzCore"
        if test "$emacs_cv_macosx_12_0" = "yes"; then
	  libs_nsgui="$libs_nsgui -framework UniformTypeIdentifiers"
	fi
     fi
   else
     libs_nsgui=
   fi
   LD_SWITCH_SYSTEM_TEMACS=$libs_nsgui
   ## The -headerpad option tells ld (see man page) to leave room at the
   ## end of the header for adding load commands.  Needed for dumping.
   ## 0x1000 is enough for roughly 52 load commands on the x86_64
   ## architecture (where they are 78 bytes each). The actual number of
   ## load commands added is not consistent but normally ranges from
   ## about 14 to about 34. Setting it high gets us plenty of slop and
   ## only costs about 1.5K of wasted binary space.
   headerpad_extra=1000

   ## This is here because src/Makefile.in did some extra fiddling around
   ## with LD_SWITCH_SYSTEM.  It seems cleaner to put this in
   ## LD_SWITCH_SYSTEM_TEMACS instead,
   test "x$LD_SWITCH_SYSTEM" = "x" && test "x$GCC" != "xyes" && \
     LD_SWITCH_SYSTEM_TEMACS="-X $LD_SWITCH_SYSTEM_TEMACS"
   ;;

  ## LD_SWITCH_X_SITE_RPATH is a -rpath option saying where to
  ## find X at run-time.
  ## When handled by cpp, this was in LD_SWITCH_SYSTEM.  However, at the
  ## point where configure sourced the s/*.h file, LD_SWITCH_X_SITE_RPATH
  ## had not yet been defined and was expanded to null.  Hence LD_SWITCH_SYSTEM
  ## had different values in configure (in ac_link) and src/Makefile.in.
  ## It seems clearer therefore to put this piece in LD_SWITCH_SYSTEM_TEMACS.
  gnu*) LD_SWITCH_SYSTEM_TEMACS="\$(LD_SWITCH_X_SITE_RPATH)" ;;

  mingw32)
   ## Is it any better under MinGW64 to relocate emacs into higher addresses?
   ## If the values of -image-base are modified, the corresponding
   ## values of DEFAULT_IMAGE_BASE in w32fns.c should be kept in sync.
   case "$canonical" in
     x86_64-*-*) LD_SWITCH_SYSTEM_TEMACS="-Wl,-stack,0x00800000 -Wl,-heap,0x00100000 -Wl,-image-base,0x400000000 -Wl,-entry,__start -Wl,-Map,./temacs.map" ;;
     *) LD_SWITCH_SYSTEM_TEMACS="-Wl,-stack,0x00800000 -Wl,-heap,0x00100000 -Wl,-image-base,0x01000000 -Wl,-entry,__start -Wl,-Map,./temacs.map" ;;
   esac
   ;;

  *) LD_SWITCH_SYSTEM_TEMACS= ;;
esac

if test x$ac_enable_profiling != x ; then
  case $opsys in
    *freebsd | gnu-linux) ;;
    *) LD_SWITCH_SYSTEM_TEMACS="$LD_SWITCH_SYSTEM_TEMACS -pg" ;;
  esac
fi

LD_SWITCH_SYSTEM_TEMACS="$LDFLAGS_NOCOMBRELOC $LD_SWITCH_SYSTEM_TEMACS"

AC_SUBST([LD_SWITCH_SYSTEM_TEMACS])

## Common for all window systems
if test "$window_system" != "none"; then
  AC_DEFINE([HAVE_WINDOW_SYSTEM], [1], [Define if you have a window system.])
  AC_DEFINE([POLL_FOR_INPUT], [1],
    [Define if you poll periodically to detect C-g.])
  WINDOW_SYSTEM_OBJ="fontset.o fringe.o image.o"

  if test "$window_system" = "x11" || test "$REALLY_ANDROID" = "yes"; then
    AC_DEFINE([HAVE_TEXT_CONVERSION], [1],
      [Define if the window system has text conversion support.])
    WINDOW_SYSTEM_OBJ="$WINDOW_SYSTEM_OBJ textconv.o"
  fi
fi

AC_SUBST([WINDOW_SYSTEM_OBJ])

AH_TOP([/* GNU Emacs site configuration template file.

Copyright (C) 1988-2026 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or (at
your option) any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs.  If not, see <https://www.gnu.org/licenses/>.  */


/* No code in Emacs #includes config.h twice, but some bits of code
   intended to work with other packages as well (like gmalloc.c)
   think they can include it as many times as they like.  */
#ifndef EMACS_CONFIG_H
#define EMACS_CONFIG_H
])dnl

AH_BOTTOM([#include <conf_post.h>

#endif /* EMACS_CONFIG_H */

/*
Local Variables:
mode: c
End:
*/
])dnl

#### Report on what we decided to do.
#### Report GTK as a toolkit, even if it doesn't use Xt.
#### It makes printing result more understandable as using GTK sets
#### toolkit_scroll_bars to yes by default.
if test "${HAVE_GTK}" = "yes"; then
  USE_X_TOOLKIT="$USE_GTK_TOOLKIT"
fi

if test $USE_ACL -ne 0; then
  ACL_SUMMARY="yes"
  test "$LIB_ACL" && ACL_SUMMARY="$ACL_SUMMARY $LIB_ACL"
  test "$LIB_XATTR" && ACL_SUMMARY="$ACL_SUMMARY $LIB_XATTR"
else
  ACL_SUMMARY=no
fi

if test -z "$GMP_H"; then
  HAVE_GMP=yes
else
  HAVE_GMP=no
fi

emacs_standard_dirs='Standard dirs'
AS_ECHO(["
Configured for '${canonical}'.

  Where should the build process find the source code?    ${srcdir}
  What compiler should emacs be built with?               ${CC} ${CFLAGS}
  Should Emacs use the GNU version of malloc?             ${GNU_MALLOC}${GNU_MALLOC_reason}
  Should Emacs use a relocating allocator for buffers?    ${REL_ALLOC}
  Should Emacs use mmap(2) for buffer allocation?         $use_mmap_for_buffers
  What window system should Emacs use?                    ${window_system}
  What toolkit should Emacs use?                          ${USE_X_TOOLKIT}
  Where do we find X Windows header files?                ${x_includes:-$emacs_standard_dirs}
  Where do we find X Windows libraries?                   ${x_libraries:-$emacs_standard_dirs}"])

#### Please respect alphabetical ordering when making additions.
optsep=
emacs_config_features=
for opt in ACL BE_APP CAIRO DBUS FREETYPE GCONF GIF GLIB GMP GNUTLS GPM GSETTINGS \
 HARFBUZZ IMAGEMAGICK JPEG LCMS2 LIBOTF LIBSELINUX LIBSYSTEMD LIBXML2 \
 M17N_FLT MODULES NATIVE_COMP NOTIFY NS OLDXMENU PDUMPER PGTK PNG RSVG SECCOMP \
 SOUND SQLITE3 THREADS TIFF TOOLKIT_SCROLL_BARS TREE_SITTER \
 UNEXEC WEBP X11 XAW3D XDBE XFT XIM XINERAMA XINPUT2 XPM XRANDR XWIDGETS \
 X_TOOLKIT ZLIB; do

    case $opt in
      PDUMPER) val=${with_pdumper} ;;
      UNEXEC) val=no ;;
      GLIB) val=${emacs_cv_links_glib} ;;
      NOTIFY|ACL) eval val=\${${opt}_SUMMARY} ;;
      TOOLKIT_SCROLL_BARS|X_TOOLKIT) eval val=\${USE_$opt} ;;
      THREADS) val=${threads_enabled} ;;
      *) eval val=\${HAVE_$opt} ;;
    esac
    case x$val in
      xno|xnone|x) continue ;;
    esac
    case $opt in
      X_TOOLKIT)
        case $val in
          GTK*|LUCID|MOTIF) opt=$val ;;
          *) continue ;;
        esac
      ;;
      NOTIFY)
        case $val in
          *lkqueue*) opt="$opt LIBKQUEUE" ;;
          *kqueue*) opt="$opt KQUEUE" ;;
          *inotify*) opt="$opt INOTIFY" ;;
          *gfile*) opt="$opt GFILENOTIFY" ;;
          *w32*) opt="$opt W32NOTIFY" ;;
        esac
      ;;
    esac
    AS_VAR_APPEND([emacs_config_features], ["$optsep$opt"])
    optsep=' '
done
AC_DEFINE_UNQUOTED([EMACS_CONFIG_FEATURES], ["${emacs_config_features}"],
  [Summary of some of the main features enabled by configure.])

# This is just a printable representation of the shared user ID.
android_shared_user=
AS_IF([test -n "$with_shared_user_id"],[android_shared_user="($with_shared_user_id)"])

AS_ECHO(["  Does Emacs use -lXaw3d?                                 ${HAVE_XAW3D}
  Is Emacs being built for Android?                       ${ANDROID} ${android_shared_user}
  Does Emacs use the X Double Buffer Extension?           ${HAVE_XDBE}
  Does Emacs use -lXpm?                                   ${HAVE_XPM}
  Does Emacs use -ljpeg?                                  ${HAVE_JPEG}
  Does Emacs use -ltiff?                                  ${HAVE_TIFF}
  Does Emacs use a gif library?                           ${HAVE_GIF} $LIBGIF
  Does Emacs use a png library?                           ${HAVE_PNG} $LIBPNG
  Does Emacs use -lrsvg-2?                                ${HAVE_RSVG}
  Does Emacs use -lwebp?                                  ${HAVE_WEBP}
  Does Emacs use -lsqlite3?                               ${HAVE_SQLITE3}
  Does Emacs use cairo?                                   ${HAVE_CAIRO}
  Does Emacs use -llcms2?                                 ${HAVE_LCMS2}
  Does Emacs use imagemagick?                             ${HAVE_IMAGEMAGICK}
  Does Emacs use native APIs for images?                  ${NATIVE_IMAGE_API}
  Does Emacs support sound?                               ${HAVE_SOUND}
  Does Emacs use -lgpm?                                   ${HAVE_GPM}
  Does Emacs use -ldbus?                                  ${HAVE_DBUS}
  Does Emacs use -lgconf?                                 ${HAVE_GCONF}
  Does Emacs use GSettings?                               ${HAVE_GSETTINGS}
  Does Emacs use a file notification library?             ${NOTIFY_SUMMARY}
  Does Emacs use access control lists?                    ${ACL_SUMMARY}
  Does Emacs use -lselinux?                               ${HAVE_LIBSELINUX}
  Does Emacs use -lgnutls?                                ${HAVE_GNUTLS}
  Does Emacs use -lxml2?                                  ${HAVE_LIBXML2}
  Does Emacs use -lfreetype?                              ${HAVE_FREETYPE}
  Does Emacs use HarfBuzz?                                ${HAVE_HARFBUZZ}
  Does Emacs use -lm17n-flt?                              ${HAVE_M17N_FLT}
  Does Emacs use -lotf?                                   ${HAVE_LIBOTF}
  Does Emacs use -lxft?                                   ${HAVE_XFT}
  Does Emacs use -lsystemd?                               ${HAVE_LIBSYSTEMD}
  Does Emacs use -ltree-sitter?                           ${HAVE_TREE_SITTER}
  Does Emacs use the GMP library?                         ${HAVE_GMP}
  Does Emacs directly use zlib?                           ${HAVE_ZLIB}
  Does Emacs have dynamic modules support?                ${HAVE_MODULES}
  Does Emacs use toolkit scroll bars?                     ${USE_TOOLKIT_SCROLL_BARS}
  Does Emacs support Xwidgets?                            ${HAVE_XWIDGETS}
  Does Emacs have threading support in lisp?              ${threads_enabled}
  Does Emacs support the portable dumper?                 ${with_pdumper}
  Which dumping strategy does Emacs use?                  ${with_dumping}
  Does Emacs have native lisp compiler?                   ${HAVE_NATIVE_COMP}
  Does Emacs use version 2 of the X Input Extension?      ${HAVE_XINPUT2}
  Does Emacs generate a smaller-size Japanese dictionary? ${with_small_ja_dic}
"])

if test -n "${EMACSDATA}"; then
   AS_ECHO(["  Environment variable EMACSDATA set to:                  $EMACSDATA"])
fi
if test -n "${EMACSDOC}"; then
   AS_ECHO(["  Environment variable EMACSDOC set to:                   $EMACSDOC"])
fi

echo

if test "$HAVE_NS" = "yes"; then
   echo
   AS_ECHO(["Run '${MAKE-make}' to build Emacs, then run 'src/emacs' to test it.
Run '${MAKE-make} install' in order to build an application bundle.
The application will go to nextstep/Emacs.app and can be run or moved
from there."])
   if test "$EN_NS_SELF_CONTAINED" = "yes"; then
      echo "The application will be fully self-contained."
    else
      AS_ECHO(["The lisp resources for the application will be installed under ${prefix}.
You may need to run \"${MAKE-make} install\" with sudo.  The application will fail
to run if these resources are not installed."])
   fi
   echo
fi

case $opsys,$emacs_uname_r in
  cygwin,1.5.*)
    AC_MSG_WARN([[building Emacs on Cygwin 1.5 is not supported.]])
           echo
	   ;;
  cygwin,3.0.[[0-7]]'('* | cygwin,3.1.[[0-2]]'('*)
    AC_DEFINE([HAVE_CYGWIN_O_PATH_BUG], [1],
      [Define to 1 if opening a FIFO, socket, or symlink with O_PATH is buggy.]);;
esac

# Remove any trailing slashes in these variables.
case $prefix in
  */) prefix=`AS_DIRNAME(["$prefix."])`;;
esac
case $exec_prefix in
  */) exec_prefix=`AS_DIRNAME(["$exec_prefix."])`;;
esac

if test "$HAVE_NS" = "yes"; then
  if test "$NS_IMPL_GNUSTEP" = yes; then
    AC_CONFIG_FILES([nextstep/GNUstep/Emacs.base/Resources/Info-gnustep.plist:nextstep/templates/Info-gnustep.plist.in \
      nextstep/GNUstep/Emacs.base/Resources/Emacs.desktop:nextstep/templates/Emacs.desktop.in])
    ns_check_file=Resources/Info-gnustep.plist
  else
    AC_CONFIG_FILES([nextstep/Cocoa/Emacs.base/Contents/Info.plist:nextstep/templates/Info.plist.in \
      nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj/InfoPlist.strings:nextstep/templates/InfoPlist.strings.in])
    ns_check_file=Contents/Info.plist
  fi
  AC_SUBST([ns_check_file])
fi

AC_CONFIG_FILES([Makefile lib/gnulib.mk])

dnl config.status treats $srcdir specially, so I think this is ok...
ARCH_INDEPENDENT_CONFIG_FILES([$srcdir/doc/man/emacs.1])

AC_CONFIG_FILES([lib/Makefile lib-src/Makefile oldXMenu/Makefile src/Makefile
                 lwlib/Makefile nextstep/Makefile nt/Makefile])
ARCH_INDEPENDENT_CONFIG_FILES([doc/emacs/Makefile doc/misc/Makefile
                               doc/lispintro/Makefile doc/lispref/Makefile
			       lisp/Makefile leim/Makefile])

SUBDIR_MAKEFILES="lib/Makefile lib-src/Makefile oldXMenu/Makefile src/Makefile lwlib/Makefile nextstep/Makefile nt/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile doc/lispref/Makefile lisp/Makefile leim/Makefile"

dnl The test/ directory is missing if './make-dist --no-tests' was used.
opt_makefile=test/Makefile
if test -f "$srcdir/$opt_makefile.in"; then
  SUBDIR_MAKEFILES="$SUBDIR_MAKEFILES $opt_makefile"
  dnl Again, it's best not to use a variable.  Though you can add
  dnl ", [], [opt_makefile='$opt_makefile']" and it should work.
  ARCH_INDEPENDENT_CONFIG_FILES([test/Makefile])
  ARCH_INDEPENDENT_CONFIG_FILES([test/manual/noverlay/Makefile])
fi
opt_makefile=test/infra/Makefile
if test -f "$srcdir/$opt_makefile.in"; then
  SUBDIR_MAKEFILES="$SUBDIR_MAKEFILES $opt_makefile"
  dnl Again, it's best not to use a variable.  Though you can add
  dnl ", [], [opt_makefile='$opt_makefile']" and it should work.
  ARCH_INDEPENDENT_CONFIG_FILES([test/infra/Makefile])
fi

if test "$ANDROID" = "yes"; then
  SUBDIR_MAKEFILES="$SUBDIR_MAKEFILES java/Makefile cross/Makefile"
fi

dnl The admin/ directory used to be excluded from tarfiles.
if test -d $srcdir/admin; then
  SUBDIR_MAKEFILES="$SUBDIR_MAKEFILES admin/charsets/Makefile admin/unidata/Makefile admin/grammars/Makefile"
  ARCH_INDEPENDENT_CONFIG_FILES([admin/charsets/Makefile])
  ARCH_INDEPENDENT_CONFIG_FILES([admin/unidata/Makefile])
  ARCH_INDEPENDENT_CONFIG_FILES([admin/grammars/Makefile])
fi                              dnl -d admin


SUBDIR_MAKEFILES_IN=`echo " ${SUBDIR_MAKEFILES}" | sed -e 's| | $(srcdir)/|g' -e 's|Makefile|Makefile.in|g'`

AC_SUBST([SUBDIR_MAKEFILES_IN])

SMALL_JA_DIC=$with_small_ja_dic
AC_SUBST([SMALL_JA_DIC])

dnl The following commands are run on the build system when building
dnl Emacs.

if test "$XCONFIGURE" != "android"; then
  dnl You might wonder (I did) why epaths.h is generated by running
  dnl make, rather than just letting configure generate it from
  dnl epaths.in.  One reason is that the various paths are not fully
  dnl expanded (see above); e.g.,
  dnl gamedir='${localstatedir}/games/emacs'.  Secondly, the GNU
  dnl Coding standards require that one should be able to run 'make
  dnl prefix=/some/where/else' and override the values set by
  dnl configure.  This also explains the 'move-if-change' test and the
  dnl use of force in the 'epaths-force' rule in Makefile.in.
  AC_CONFIG_COMMANDS([src/epaths.h], [
  if test "${opsys}" = "mingw32"; then
    ${MAKE-make} MAKEFILE_NAME=do-not-make-Makefile epaths-force-w32
  elif test "$HAVE_NS" = "yes" && test "$EN_NS_SELF_CONTAINED" = "yes"; then
    ${MAKE-make} MAKEFILE_NAME=do-not-make-Makefile epaths-force-ns-self-contained
  else
    ${MAKE-make} MAKEFILE_NAME=do-not-make-Makefile epaths-force
  fi || AC_MSG_ERROR(['src/epaths.h' could not be made.])
  ], [GCC="$GCC" CPPFLAGS="$CPPFLAGS" opsys="$opsys" HAVE_NS="$HAVE_NS"
      EN_NS_SELF_CONTAINED="$EN_NS_SELF_CONTAINED"])

  dnl NB we have to cheat and use the ac_... version because abs_top_srcdir
  dnl is not yet set, sigh.  Or we could use ../$srcdir/src/.gdbinit,
  dnl or a symlink?
  AC_CONFIG_COMMANDS([src/.gdbinit], [
  if test ! -f src/.gdbinit && test -f "$srcdir/src/.gdbinit"; then
    AS_ECHO(["source $ac_abs_top_srcdir/src/.gdbinit"]) > src/.gdbinit
  fi
  ])

  dnl Perhaps this would be better named doc-emacs-emacsver.texi?
  dnl See comments for etc-refcards-emacsver.tex.
  dnl Since we get a doc/emacs directory generated anyway, for the Makefile,
  dnl it is not quite the same.  But we are generating in $srcdir.
  AC_CONFIG_COMMANDS([doc/emacs/emacsver.texi], [
  ${MAKE-make} -s --no-print-directory -C doc/emacs doc-emacsver || \
  AC_MSG_ERROR(['doc/emacs/emacsver.texi' could not be made.])
  ])

  dnl If we give this the more natural name, etc/refcards/emacsver.texi,
  dnl then a directory etc/refcards is created in the build directory,
  dnl which is probably harmless, but confusing (in out-of-tree builds).
  dnl (If we were to generate etc/refcards/Makefile, this might change.)
  dnl It is really $srcdir/etc/refcards/emacsver.tex that we generate.
  AC_CONFIG_COMMANDS([etc-refcards-emacsver.tex], [
  ${MAKE-make} -s MAKEFILE_NAME=do-not-make-Makefile etc-emacsver || \
  AC_MSG_ERROR(['etc/refcards/emacsver.tex' could not be made.])
  ])

  if test $AUTO_DEPEND = yes; then
     for dir in $AUTODEPEND_PARENTS; do
       AS_MKDIR_P([$dir/deps])
       AS_MKDIR_P([cross/$dir/deps])
     done
  fi
  if $gl_gnulib_enabled_dynarray || $gl_gnulib_enabled_scratch_buffer; then
    AS_MKDIR_P([lib/malloc])
    AS_MKDIR_P([cross/lib/malloc])
    if test $AUTO_DEPEND = yes; then
      AS_MKDIR_P([lib/deps/malloc])
      AS_MKDIR_P([cross/lib/deps/malloc])
    fi
  fi

  dnl Make cross/lib, which various Makefiles in cross expect to
  dnl always exist.
  AS_MKDIR_P([cross/lib])
  AS_MKDIR_P([cross/lib/malloc])
  AS_MKDIR_P([cross/lib/sys])
  AS_MKDIR_P([cross/lib-src])

  dnl Make cross/etc; this directory will hold the documentation file
  dnl holding doc strings for Android specific C files that aren't
  dnl built during the initial compilation of Emacs for the build
  dnl machine.
  AS_MKDIR_P([cross/etc])

  AS_IF([test "x$with_android" != "xno"], [
    dnl Link gnulib files to cross/lib as well.  af_alg.h and
    dnl lib/save-cwd.h are copied manually from gnulib, and as such
    dnl aren't specified in gl_FILE_LIST.
    emacs_files='gl_FILE_LIST lib/af_alg.h lib/save-cwd.h'
    dnl These files are specific to Emacs.
    emacs_files="$emacs_files lib/fingerprint.c lib/fingerprint.h \
		   lib/save-cwd.c lib/openat-die.c lib/save-cwd.c \
		   lib/min-max.h"
    for file in $emacs_files; do
      AS_IF([expr "X${file}J" : "Xlib/.*[[ch]]J" >/dev/null],
	[AS_IF([test -f "$srcdir/$file"],
	  [AC_CONFIG_LINKS([cross/$file:$file])])])
    done])
fi

# Make java/Makefile
ARCH_INDEPENDENT_CONFIG_FILES([java/Makefile])
ARCH_INDEPENDENT_CONFIG_FILES([cross/Makefile])

# Make java/AndroidManifest.xml
ARCH_INDEPENDENT_CONFIG_FILES([java/AndroidManifest.xml])

# Make ndk-build Makefiles.  This is only done inside the recursive
# configure.
ndk_CONFIG_FILES

AC_OUTPUT

if test ! "$with_mailutils"; then
  if test "$with_pop" = yes; then
    AC_MSG_WARN([This configuration installs a 'movemail' program
that retrieves POP3 email via only insecure channels.
To omit insecure POP3, you can use '$0 --without-pop'.])
  elif test "$with_pop" = no-by-default; then
    AC_MSG_WARN([This configuration installs a 'movemail' program
that does not retrieve POP3 email.  By default, Emacs 25 and earlier
installed a 'movemail' program that retrieved POP3 email via only
insecure channels, a practice that is no longer recommended but that
you can continue to support by using '$0 --with-pop'.])
  fi

  case $opsys in
    mingw32)
      # Don't suggest GNU Mailutils, as it hasn't been ported.
      ;;
    *)
      emacs_fix_movemail="use '$0 --with-mailutils'"
      case `(movemail --version) 2>/dev/null` in
	*Mailutils*) ;;
	*) emacs_fix_movemail="install GNU Mailutils
<https://mailutils.org> and $emacs_fix_movemail";;
      esac
      AC_MSG_NOTICE([You might want to $emacs_fix_movemail.]);;
  esac
fi

if test "${HAVE_XFT}" = yes && test "$is_xft_version_outdated" = "yes"; then
  AC_MSG_WARN([This configuration uses a version of libXft earlier than 2.3.6,
    which is impacted by a number of rendering issues up to and including
    crashes.  Please consider using Cairo graphics instead (they are
    auto-detected if the relevant development headers are installed).])
fi

if test "${HAVE_CAIRO}" = "yes" && test "${HAVE_HARFBUZZ}" = no; then
  AC_MSG_WARN([This configuration uses the Cairo graphics library,
    but not the HarfBuzz font shaping library (minimum version $harfbuzz_required_ver).
    We recommend the use of HarfBuzz when using Cairo, please install
    appropriate HarfBuzz development packages.])
fi

# Let plain 'make' work.
test "$MAKE" = make || test -f makefile || cat >makefile <<EOF
.POSIX:
MAKE = $MAKE
all:
	\$(MAKE) -f Makefile \$?
.DEFAULT:
	\$(MAKE) -f Makefile \$<
EOF