Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Tesla LDU #1

Open
KeithJudge opened this issue Dec 5, 2021 · 1 comment
Open

Tesla LDU #1

KeithJudge opened this issue Dec 5, 2021 · 1 comment

Comments

@KeithJudge
Copy link

On the diagram shipped with my LDU controller it showed the legend for theampseal conn but there is 20 pins but only 19 listed. Which pin is not used. Thank you
@gesso15
Copy link

gesso15 commented Feb 18, 2022

@KeithJudge Per the diagram here: https://github.com/damienmaguire/Tesla-Drive-Unit/blob/master/V4b/Tesla_V4B%20-%20Schematic.pdf

It seems that the missing signal on the doc sheet sent with the board from open inverter is accel 1 gnd, otherwise known as the ground for the throttle pedal. It should go between main gnd pin 11 and cruise input pin 13, if I am reading this correctly.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@gesso15 @KeithJudge