Run_SKIRT9_id_PDR_Testing.py

import os,sys,re,string,time,glob,subprocess
import numpy as np
import scipy.spatial as spt
from astropy.io import fits
import h5py
import illustris_tools as it
import illustris_python as il

def get_subhalos(basePath,snap,mstar_lower=0,mstar_upper=np.inf):
    '''
    mstar_lower and mstar_upper have log10(Mstar/Msun) units and are physical (i.e. Msun, not Msun/h).
    '''
    from astropy.cosmology import Planck15 as cosmo
    little_h = cosmo.H0.value/100.
    
    ptNumStars = il.snapshot.partTypeNum('stars') 
    fields = ['SubhaloMassType','SubhaloFlag']
    subs = il.groupcat.loadSubhalos(basePath,snap,fields=fields)

    mstar = subs['SubhaloMassType'][:,ptNumStars]
    flags = subs['SubhaloFlag']
    subs = np.arange(subs['count'],dtype=int)
    
    # convert to units used by TNG (1e10 Msun/h)
    mstar_lower = 10**(mstar_lower)/1e10*little_h
    mstar_upper = 10**(mstar_upper)/1e10*little_h
    subs = subs[(flags!=0)*(mstar>=mstar_lower)*(mstar<=mstar_upper)]
    return subs,mstar[subs]

def apply_filter(data_cube,wavelengths,filter_data,redshift=0.0,airmass=0.):
    '''
    Apply filter transmission function to a rest-frame SKIRT data cube which is redshifted 
    by `redshift`. Airmass is currently a place-holder. Output image is in AB mag/arcsec2.
    '''
    # useful constants / quantities
    speed_of_light = 2.998e8 # [m/s]
    speed_of_light = speed_of_light*1e10 # [Angstrom/s]
    
    # convert data cube from [W/m2/micron/arcsec2] to [Jy*Hz/Angstrom/arcsec2]
    data_cube=data_cube*1e22

    # wavelengths of datacube [microns] (expand by redshift factor)
    wl=wavelengths*1e4*(1+redshift) # [Angstrom]

    # filter data
    filter_wl = filter_data[:,0]
    filter_res = filter_data[:,1]

    # filter response interpolated onto image wavelength grid
    filter_res = np.interp(xp=filter_wl,x=wl,fp=filter_res,left=0,right=0) # unitless

    # filter-specific pivot wavelength squared [Angstrom2]
    wl_pivot2 = np.trapz(filter_res*wl,wl)/np.trapz(filter_res/wl,wl)
    
    # now the mean photon rate density in the filter [Jy*Hz/Angstrom/arcsec2]
    f_wl = np.trapz((wl*filter_res).reshape(-1,1,1)*data_cube,wl,axis=0)/np.trapz(wl*filter_res,wl)

    # multiplying by wl_pivot2/speed_of_light gives [Jy/arcsec2]
    # convert to maggies/arcsec2 (w/ AB zeropoint) using 1 maggy ~ 3631 Jy
    # apply (1+z)**-5 redshift degradation to wavelength specific intensities
    f_mgys = f_wl*wl_pivot2/speed_of_light/3631.*(1+redshift)**-5 # [maggies/arcsec2]

    # convert to mag/arcsec2 surface brightness for numerical ease
    with np.errstate(divide='ignore'):
        f_sb = -2.5*np.log10(f_mgys) # [mag/arcsec2] AB system
        f_sb[f_sb==np.inf]=99.

    return f_sb

def photometry(cube_dir,snap,sub,cam,sim_tag,skirt_path,sim_path,out_path,
               filters=['CFHT_MegaCam.u','CFHT_MegaCam.r',
                        'Subaru_HSC.g','Subaru_HSC.r','Subaru_HSC.i','Subaru_HSC.z','Subaru_HSC.Y',
                        'UKIRT_UKIDSS.J','UKIRT_UKIDSS.H','UKIRT_UKIDSS.K',
                        'Spitzer_IRAC.I1','Spitzer_IRAC.I2','Spitzer_IRAC.I3','Spitzer_IRAC.I4']):
    '''
    Using an existing datacube, compute photometry for snap,sub,cam in the provided filters.
    An image is only created if the redshifted spectrum of the galaxy completely covers the 
    filter transmission function (i.e. like a boxcar).
    '''

    filter_path = f'{skirt_path}/Photometry/Filters'
    if not os.access(out_path,0):
        os.system(f'mkdir -p {out_path}')
        
    redshift = il.groupcat.loadHeader(sim_path,snap)['Redshift']
    file_name = f'{cube_dir}/shalo_{snap:03}-{sub}_{cam}_total.fits'
    photo_name = f'{out_path}/shalo_{snap:03}-{sub}_{cam}_photo.fits'

    if not os.access(file_name,0):
        print(f'Data cube file: {file_name} not found. Skipping...')
        return
    # read IFU cube header and data
    with fits.open(file_name,mode='readonly') as hdul:
        # IFU header
        header = hdul[0].header
        # image spectral flux density in [W/m2/micron/arcsec2]
        data_cube = hdul[0].data
    
    wavelengths = np.loadtxt(f'{skirt_path}/SKIRT9_Wavelength_Grid.dat',skiprows=0).astype(float)
    
    hdul = fits.HDUList()
    for i,filter_name in enumerate(filters):
        filter_data = np.loadtxt(f'{filter_path}/{filter_name}.dat')
        if not (filter_data[-1,0])<=(wavelengths[-1]*1e4*(1+redshift)):
            continue
        image = apply_filter(data_cube,wavelengths,filter_data,redshift=redshift)
        hdu = fits.ImageHDU(image.astype('float32'),name=filter_name)
        hdr = hdu.header
        hdr['SIMTAG'] = (sim_tag,'Simulation name')
        hdr['SNAPNUM'] = (snap,'Simulation snapshot')
        hdr['SUBHALO'] = (sub,'Subhalo ID')
        hdr['ORIGIN'] = ('SKIRT 9 Simulation','Image origin')
        hdr['REDSHIFT'] = (float(f'{redshift:.4f}'),'Redshift')
        hdr['FILTER'] = (filter_name,'Filter name')
        hdr['BUNIT'] = ('AB mag/arcsec2','Image units')
        hdr['CRPIX1'] = (header['CRPIX1'], 'X-axis coordinate system reference pixel')
        hdr['CRVAL1'] = (header['CRVAL1'], 'Coordinate system value at X-axis reference pix')
        hdr['CDELT1'] = (header['CDELT1'], 'Coordinate increment along X-axis')
        hdr['CTYPE1'] = (header['CTYPE1'], 'Physical units of the X-axis increment')
        hdr['CRPIX2'] = (header['CRPIX2'], 'Y-axis coordinate system reference pixel')
        hdr['CRVAL2'] = (header['CRVAL2'], 'Coordinate system value at Y-axis reference pix')
        hdr['CDELT2'] = (header['CDELT2'], 'Coordinate increment along Y-axis')
        hdr['CTYPE2'] = (header['CTYPE2'], 'Physical units of the Y-axis increment')
        hdul.append(hdu)
        
    hdul.writeto(photo_name,overwrite=True) 
    
def rowcount(filename):
    stdout = subprocess.check_output(f'wc -l {filename}',shell=True,text=True)
    return int(stdout.split(' ')[0])
    
def create_wl_grid(filename='Wavelength_Grid.dat'):
    wl = np.linspace(0.1,1.,181,endpoint=True)
    wl = np.append(wl,np.linspace(1.,5.,21)[1:])
    np.savetxt(filename,wl,header=str(len(wl)),comments='')
    
def nn_dist(args):
    smoothlength,point,tree = args
    return tree.query(point,k=smoothlength)[0][-1]

def RR2014_dust_density(rho_gas,Z_gas,T_gas,SFR_gas,T_thresh=75000,SFR_thresh=0.):
    '''
    Compute gas-to-dust density fraction for gas cells following Remy-Ruyer+2014 
    empirical calibrations (Figure 4 and Table 1). Use broken power law relation 
    with X_CO,Z (column 3 in Table 1). Use gas-to-dust density fraction and gas 
    density to obtain dust density, rho_dust.
    
    Assume log(Zcell/Zsun) = logOH_cell - logOH_sun and use 12+logOH_sun = 8.69
    => log(Zcell/Zsun) = 12 + logOH_cell - ( 12 + logOH_sun ) = 12 + logOH_cell - 8.69
    => logOHp12_cell is defined as 12 + logOH_cell = log(Zcell/Zsun) + 8.69 = log(Z_gas/0.014) + 8.69
    '''
    logOHp12_cell = np.log10(Z_gas/0.014) + 8.69
    # Remy-Ruyer+2014 Table 1 X_CO,Z broken power law (higher, H: 12+logOH>=8.1)
    logGtD = 2.21 + 1.00 * (8.69 - logOHp12_cell)
    # Remy-Ruyer+2014 Table 1 X_CO,Z broken power law (lower, L: 12+logOH<8.1)
    lower_mask = logOHp12_cell<8.1
    logGtD[lower_mask] = 0.96 + 3.10 * (8.69 - logOHp12_cell[lower_mask])
    rho_dust = 10**(-logGtD)*rho_gas
    # set density to zero for above/below temperature and sfr thresholds
    rho_dust[((T_gas>T_thresh) & (SFR_gas<=SFR_thresh))] = 0.
    rho_dust[np.isnan(rho_dust)]=0.
    return rho_dust

def prepare_skirt(snap,sub,sim_path,tmp_path,
                  pixelsize=100.,fovsize_hmr=2.,
                  smoothlength=32,fof_factor=np.sqrt(2),
                  fov_min_pc=5e4,fov_max_pc=5e5,
                  nsources_min=1e4,nsources_max=1e5,
                  correct_pdrs=True):
    '''
    pixel_size: output pixel size in [pc]
    fov_hmr: size of fov in stellar half mass radius units
    smooth_length: kernel smoothing length of stellar particles (nn distance)
    fof_factor: factor by which fovsize_hmr is multiplied to determine which FOF halo particles are used
    '''

    #load current scale factor
    header = dict(h5py.File(f'{sim_path}/snapdir_{snap:03d}/snap_{snap:03d}.0.hdf5',"r")["Header"].attrs.items())
    a2 = header["Time"]

    sub_cat = il.groupcat.loadSingle(sim_path,snap,subhaloID=sub)
    # GPM position and parent FOF halo of subhalo
    group_idx = sub_cat['SubhaloGrNr']
    centerGal = sub_cat['SubhaloPos']
    
    # use DM half-mass radius
    fovsize_ckpch = fovsize_hmr*sub_cat["SubhaloHalfmassRadType"][1] # ckpc/h
    fovsize = it.convertlength(fovsize_ckpch)*a2*1000 # pc
    fovsize = max(fovsize,fov_min_pc) # set minimum fov to 100 pkpc
    fovsize = min(fovsize,fov_max_pc) # set maximum fov to 1 pMpc
    npix = np.ceil(fovsize/pixelsize).astype(int)

    if fovsize == 0:
        print("Not a valid subhalo, I will stop now and running SKIRT makes no sense")
        raise SystemExit
    
    # save f_stars,f_mappings,f_gas to file
    f_stars = f'shalo_{snap:03d}-{sub}_stars.dat'
    f_mappings = f'shalo_{snap:03d}-{sub}_mappings.dat'
    f_gas = f'shalo_{snap:03d}-{sub}_gas.dat'
    
    #############
    ### Stars ###
    #############
    if not (os.access(f'{tmp_path}/{f_stars}',0) or os.access(f'{tmp_path}/{f_mappings}',0)):
        fields = ["Coordinates","GFM_StellarFormationTime","GFM_InitialMass",
                  "GFM_Metallicity", "Velocities", "Masses"]
        #load star particles
        stars = il.snapshot.loadHalo(sim_path,snap,group_idx,4,fields)
        coords,cntr = it.periodicfix(stars['Coordinates'],centerGal) # ckpc/h
        coords = it.convertlength(coords)*a2*1000 # pc
        cntr = it.convertlength(cntr)*a2*1000 # pc

        #ignore all wind particles 
        star_idx = stars['GFM_StellarFormationTime'] > 0
        #include only particles within certain distance of target galaxy
        star_idx *= np.prod(np.abs(coords-cntr)<=fovsize*fof_factor/2,axis=1,dtype=bool)
        #coords of fof stars within fovsize*fof_factor from SubhaloPos
        coords = coords[star_idx]-cntr

        #smoothing length in proper pc (distance to smoothlength closest neighbour)
        #create array with locations
        #setup KDTree
        tree = spt.cKDTree(coords,leafsize = 100)
        environ = os.environ
        nthreads = int(environ['SKIRT_CPUS_PER_TASK']) if 'SKIRT_CPUS_PER_TASK' in environ else 1
        if nthreads>1:
            from multiprocessing import Pool
            argList = [(smoothlength,point,tree) for point in coords]
            with Pool(nthreads) as pool:
                h = np.asarray(pool.map(nn_dist,argList))
        else:
            h = np.zeros(len(coords))
            for i,point in enumerate(coords):
                dist = tree.query(point,k=smoothlength)[0][-1]
                h[i] = dist
            h = np.asarray(h)

        #initial mass in solar masses
        M = it.convertmass(stars["GFM_InitialMass"][star_idx])
        #metallicity (actual metallicity, not in solar units)
        Z = stars["GFM_Metallicity"][star_idx]
        #age of the stars in years
        if nthreads>1:
            from multiprocessing import Pool
            argList = [(a1,a2) for a1 in stars["GFM_StellarFormationTime"][star_idx]]
            with Pool(nthreads) as pool:
                t = np.asarray(pool.starmap(it.age,argList))
        else:
            t = it.age(stars["GFM_StellarFormationTime"][star_idx],a2)
        #parameters for all stars
        total_stars = np.column_stack((coords,h,M,Z,t))
        nsources = total_stars.size
        nsources = max(nsources,nsources_min)
        nsources = min(nsources,nsources_max)

        ### Old stars ####
        age_idx = t>1e7 #only consider stars older than 10Myr for bruzual charlot spectra
        np.savetxt(f'{tmp_path}/{f_stars}',total_stars[age_idx],delimiter = " ")

        ### Young stars ###
        age_idx = t<=1e7 #only consider stars younger than 10Myr for MappingsIII spectra
        #calculate SFR (assuming SFR has been constant in the last 10Myr)
        SFRm = total_stars[age_idx,4]/1e7
        #for compactness, take typical value of 5:
        logC = np.full(len(SFRm),5)
        #for ISM pressure, take typical value log(P/kB / cm^-3K) = 5, P = 1.38e-12 N/m2
        pISM = np.full(len(SFRm),1.38e-12)
        #for PDR covering fraction, take f = 0.2
        fPDR = np.full(len(SFRm),0.0)
        #create 2D-array and write into data file
        young_stars = np.column_stack((coords[age_idx],h[age_idx],
                                       SFRm,Z[age_idx],logC,pISM,fPDR))
        np.savetxt(f'{tmp_path}/{f_mappings}',young_stars,delimiter = " ")
        del total_stars,young_stars
    else:
        nsources = rowcount(f'{tmp_path}/{f_stars}')
        nsources+= rowcount(f'{tmp_path}/{f_mappings}')
        nsources = max(nsources,nsources_min)
        nsources = min(nsources,nsources_max)

    #############
    #### Gas ####
    #############
    if not os.access(f'{tmp_path}/{f_gas}',0):
        fields = ["Coordinates","Density","GFM_Metallicity","InternalEnergy",
                  "ElectronAbundance","StarFormationRate","Masses"]
        #load gas particles
        gas = il.snapshot.loadHalo(sim_path,snap,group_idx,0,fields)
        # allow possibility of no gas
        if gas["count"] != 0:
            coords,cntr = it.periodicfix(gas['Coordinates'],centerGal) # ckpc/h
            coords = it.convertlength(coords)*a2*1000 # pc
            cntr = it.convertlength(cntr)*a2*1000 # pc
            #include only particles within certain distance of target galaxy
            gas_idx = np.prod(np.abs(coords-cntr)<=fovsize*fof_factor,axis=1,dtype=bool)
            # coords of fof gas within fovsize*fof_factor from SubhaloPos
            coords = coords[gas_idx]-cntr
            # density
            rhog = it.convertdensity(gas["Density"][gas_idx])/((1000*a2)**3)
            #gas particle metallicity (not in solar units)
            #This will actually become the dust abundance
            Zg = gas["GFM_Metallicity"][gas_idx]
            #gas temperature in K
            T = it.temp(gas["InternalEnergy"][gas_idx],gas["ElectronAbundance"][gas_idx])
            #SFR of gas cell
            SFRg = gas["StarFormationRate"][gas_idx]
            #metal mass of each gas cells
            metal_mass = Zg*it.convertmass(gas["Masses"][gas_idx])
            
            if correct_pdrs:
                #load young star properties for gas/dust calculations
                young_stars = np.loadtxt(f'{tmp_path}/{f_mappings}')
                #Correct for double accounting of dust in PDR regions
                #Calculate mass of metals in the PDR and take this from the stellar particles within the smoothing length
                for young_star in young_stars:
                    #assume metallicity of star equals metallicity of parent PDR
                    #factor of 10 assumes Mpdr = 10 x Mstar
                    metal_mass_PDR = 10 * young_star[5] * young_star[4]*1e7                  
                    metal_mass_excess, n_grow = -1, 1.
                    #grow N until the enclosed dust mass in h*N exceeds PDR mass
                    while metal_mass_excess < 0:
                        loc_idx = ( np.sum((coords-young_star[:3])**2,axis=1) < (n_grow*young_star[3])**2 )
                        #Metal mass in the gas cells within that smoothing length
                        loc_metal_mass = np.sum(metal_mass[loc_idx])
                        #Metal mass left over in the gas cells after subtracting pdr contribution
                        metal_mass_excess = loc_metal_mass - metal_mass_PDR
                        n_grow *= 2.
                    norm = loc_metal_mass/metal_mass_excess
                    Zg[loc_idx] = Zg[loc_idx]/norm
                del young_stars
                
            #Calculate the dust density
            rho_dust = RR2014_dust_density(rhog,Zg,T,SFRg)

        else:
            coords,rho_dust= np.array([[],[],[]]).T,[]
        #create 2D-array and write into data file
        total_gas = np.column_stack((coords,rho_dust))
        np.savetxt(f'{tmp_path}/{f_gas}',total_gas,delimiter = " ")
        ncells = len(total_gas)
        del total_gas
    else:
        ncells = rowcount(f'{tmp_path}/{f_gas}')
        
    return fovsize,npix,ncells,nsources,f_stars,f_mappings,f_gas

def run_skirt(snap,sub,cam,sim_tag,sim_path,tmp_path,skirt_path):
    '''
    sim_path: base path to simulation snapshot data
    tmp_path: working directory for job 
    skirt_path: path to skirt template files (like shalo.ski, wavelength file)
    
    Paths default to working directory if not specified.
    '''
    
    fovsize,npix,ncells,nsources,f_stars,f_mappings,f_gas = prepare_skirt(snap,sub,sim_path,tmp_path,correct_pdrs=False)
    
    snap,sub = int(snap),int(sub)
    if ncells==0:
        ski_in = f'{skirt_path}/shalo_skirt9-no_dust.ski'
    else:
        ski_in = f'{skirt_path}/shalo_skirt9.ski'

    if not os.access(tmp_path,0):
        os.system(f'mkdir -p {tmp_path}')
    os.chdir(tmp_path)
            
    # prepare skirt output and place in tmpdir
    ski_out = f'shalo_{snap:03d}-{sub}.ski'
    
    f_wavelengths = 'SKIRT9_Wavelength_Grid.dat'
    os.system(f'cp {skirt_path}/{f_wavelengths} {tmp_path}/{f_wavelengths}')
    nels = np.loadtxt(f'{tmp_path}/{f_wavelengths}').size
    # launch nsources*nels photon packets (recommended for SKIRT9)
    nsources*=nels
    
    cams = np.array(['v0','v1','v2','v3'])
    incls = [109.5,109.5,109.5,0.]
    azims = [-30.,30.,90.,0.]
    
    idx = np.argwhere(cams==cam)[0][0]
    incl = incls[idx]
    azim = azims[idx]
    
    environ = os.environ
    if 'SKIRT_NTASKS' in environ:
        nprocesses = int(environ['SKIRT_NTASKS'])
        nthreads = int(environ['SKIRT_CPUS_PER_TASK'])
    else:
        nprocesses = 1
        nthreads = 1
        
    with open(ski_in,'r') as f:
        filedata = f.read()

    # Replace the target string
    filedata = re.sub('_FILENAME_STARS_',f_stars,filedata)
    filedata = re.sub('_FILENAME_MAPPINGS_',f_mappings,filedata)
    filedata = re.sub('_FILENAME_GAS_',f_gas,filedata)
    filedata = re.sub('_FILENAME_WAVELENGTHS_',f_wavelengths,filedata)
    filedata = re.sub('_FOVSIZE_',str(fovsize),filedata)
    filedata = re.sub('_PIXELNUM_',str(npix),filedata)
    filedata = re.sub('_SIZE_',str(fovsize/2.),filedata)
    filedata = re.sub('_NUMCELLS_',str(ncells),filedata)
    filedata = re.sub('_INSTRUMENT_NAME_',cam,filedata)
    filedata = re.sub('_INCLINATION_',str(incl),filedata)
    filedata = re.sub('_AZIMUTH_',str(azim),filedata)
    filedata = re.sub('_NUMPACKAGES_',str(nsources),filedata)
    filedata = re.sub('wavelengthBias="0.5"','wavelengthBias="1.0"',filedata)
    filedata = re.sub('sourceBias="0.5"','sourceBias="1.0"',filedata)

    with open(ski_out, 'w') as f:
        f.write(filedata)

    os.system(f'mpirun -n {nprocesses} skirt -t {nthreads} {ski_out}')
         
def spectroscopy(cube_dir,snap,sub,cam,sim_tag,out_path):
    return

def prepare_only(args):
    
    snap,sub_idx = int(args[1]),int(args[2])
    sim_tag = 'TNG50-1'
    
    # base path where TNG data is stored
    sim_path = f'/lustre/work/connor.bottrell/Simulations/IllustrisTNG/{sim_tag}/output'
    # base path of output directory
    project_path = '/lustre/work/connor.bottrell/Simulations/IllustrisTNG'
    # photometry path
    phot_path = f'{project_path}/{sim_tag}/postprocessing/SKIRT9/Photometry/{snap:03}'
    # spectroscopy path
    spec_path = f'{project_path}/{sim_tag}/postprocessing/SKIRT9/Spectroscopy/{snap:03}'
    
    subs,mstar = get_subhalos(sim_path,snap=snap,mstar_lower=9)
    sub = subs[sub_idx]

    # Check if output already exists. If so, skip.
    cams = ['v0','v1','v2','v3']
    outfiles = glob.glob(f'{phot_path}/shalo_{snap:03}-{sub}_*_photo.fits')
    if len(outfiles)==len(cams):
        sys.exit(f'All output images already exist for {sim_tag}-{snap:03}-{sub}.')
    
    # working directory for job
    tmp_path=f'/lustre/work/connor.bottrell/tmpdir/tmp_{snap:03}-{sub}'
    if not os.access(tmp_path,0):
        os.system(f'mkdir -p {tmp_path}')
    os.chdir(tmp_path)
    
    fovsize,npix,ncells,nsources,f_stars,f_mappings,f_gas = prepare_skirt(snap,sub,sim_path,tmp_path,correct_pdrs=False)
    
def run_only(args):
    
    snap,sub_idx = int(args[1]),int(args[2])
    sim_tag = 'TNG50-1'
    
    # base path where TNG data is stored
    sim_path = f'/lustre/work/connor.bottrell/Simulations/IllustrisTNG/{sim_tag}/output'
    # base path of output directory
    project_path = '/lustre/work/connor.bottrell/Simulations/IllustrisTNG'
    # photometry path
    phot_path = f'{project_path}/{sim_tag}/postprocessing/SKIRT9/Photometry/{snap:03}'
    # spectroscopy path
    spec_path = f'{project_path}/{sim_tag}/postprocessing/SKIRT9/Spectroscopy/{snap:03}'
    
    subs,mstar = get_subhalos(sim_path,snap=snap,mstar_lower=9)
    sub = subs[sub_idx]

    cams = ['v0','v1','v2','v3']
        
    # working directory for job
    tmp_path=f'/lustre/work/connor.bottrell/tmpdir/tmp_{snap:03d}-{sub}'
    skirt_path = f'{project_path}/Scripts/SKIRT'
    
    f_stars = f'{tmp_path}/shalo_{snap:03d}-{sub}_stars.dat'
    f_mappings = f'{tmp_path}/shalo_{snap:03d}-{sub}_mappings.dat'
    f_gas = f'{tmp_path}/shalo_{snap:03d}-{sub}_gas.dat'
    
    for skirt_file in [f_stars,f_mappings,f_gas]:
        if not os.access(skirt_file,0):
            sys.exit(f'Missing SKIRT input files for {snap:03}-{sub}. Quitting...')
    
    for cam in cams:
        if not os.access(f'{phot_path}/shalo_{snap:03}-{sub}_{cam}_photo.fits',0):
            run_skirt(snap,sub,cam,sim_tag,
                     sim_path=sim_path,
                     tmp_path=tmp_path,
                     skirt_path=skirt_path)
            photometry(cube_dir=tmp_path,snap=snap,sub=sub,cam=cam,sim_tag=sim_tag,
                       skirt_path=skirt_path,sim_path=sim_path,out_path=phot_path)
            
#     files_exist = True
#     for cam in cams:
#         if not os.access(f'{phot_path}/shalo_{snap:03}-{sub}_{cam}_photo.fits',0):
#             files_exist=False
    
#     # clean up
#     if files_exist:
#         os.system(f'rm -rf {tmp_path}')
        
if __name__=='__main__':
    
    args = sys.argv
    snap,sub,cam = int(args[1]),int(args[2]),args[3]
    sim_tag = 'TNG50-1'
    sim_path = f'/lustre/work/connor.bottrell/Simulations/IllustrisTNG/{sim_tag}/output'
    tmp_path = f'/lustre/work/connor.bottrell/Simulations/IllustrisTNG/TNG50-1/postprocessing/SKIRT9/Tests/PDR/shalo_{snap:03}-{sub}_uncorrected_fpdr00_wlbias10_sbias10/'
    project_path = '/lustre/work/connor.bottrell/Simulations/IllustrisTNG'
    skirt_path = f'{project_path}/Scripts/SKIRT'
    phot_path = tmp_path
    
    # working directory for job
    if not os.access(tmp_path,0):
        os.system(f'mkdir -p {tmp_path}')
    os.chdir(tmp_path)
    
    run_skirt(snap,sub,cam,sim_tag,sim_path,tmp_path,skirt_path)
    
    photometry(cube_dir=tmp_path,snap=snap,sub=sub,cam=cam,sim_tag=sim_tag,
               skirt_path=skirt_path,sim_path=sim_path,out_path=phot_path)