Update Examples (#115)

Author: zfields

.github/workflows/note-arduino-ci.yml

@@ -109,18 +109,18 @@ jobs:
           - ./examples/Example8_BinarySendReceive/Example8_BinarySendReceive.ino
           - ./examples/Example9_BinarySendReceiveChunked/Example9_BinarySendReceiveChunked.ino
         fully-qualified-board-name:
-          - STMicroelectronics:stm32:BluesW:pnum=SWAN_R5
-          - esp32:esp32:featheresp32
+          - adafruit:nrf52:feather52840:softdevice=s140v6
           - adafruit:samd:adafruit_feather_m4
-          - STMicroelectronics:stm32:GenF4:pnum=FEATHER_F405
+          # The binary examples don't fit in the Uno's flash.
+          # - arduino:avr:uno
           # TODO: Fix this. May require upstream fix.
           # - arduino:mbed_nano:nano33ble
+          - esp32:esp32:featheresp32
+          - rp2040:rp2040:rpipico
           - SparkFun:apollo3:sfe_artemis_thing_plus
+          - STMicroelectronics:stm32:BluesW:pnum=SWAN_R5
+          - STMicroelectronics:stm32:GenF4:pnum=FEATHER_F405
           - STMicroelectronics:stm32:Nucleo_32:pnum=NUCLEO_L432KC
-          - adafruit:nrf52:feather52840:softdevice=s140v6
-          - rp2040:rp2040:rpipico
-          # The binary examples don't fit in the Uno's flash.
-          # - arduino:avr:uno
 
     steps:
       - name: Checkout code

examples/Example0_LibrarylessCommunication/Example0_LibrarylessCommunication.ino

@@ -13,11 +13,8 @@
 // Core IoT Development Kit, you would connect the R2 pin to the Notecard's TX
 // pin, and the M5Stack's T2 pin to the Notecard's RX pin, and then would
 // use Serial2.
-//
-// Note that both of these definitions are optional; just prefix either line
-// with `//` to remove it.
-// - Remove txRxPinsSerial if you wired your Notecard using I2C SDA/SCL pins
-//   instead of serial RX/TX
+
+#include "Arduino.h"
 
 #if defined(ARDUINO_ARCH_AVR) && not defined(HAVE_HWSERIAL1)
 #define txRxPinsSerial Serial
@@ -90,7 +87,6 @@ void loop()
     static unsigned eventCounter = 0;
     if (++eventCounter > 25)
     {
-        txRxPinsSerial.println("Demo cycle complete. Program stopped. Press RESET to restart.");
         delay(10000); // 10 seconds
         return;
     }

examples/Example1_NotecardBasics/Example1_NotecardBasics.ino

@@ -127,7 +127,7 @@ void loop()
     static unsigned eventCounter = 0;
     if (++eventCounter > 25)
     {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.");
+        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.\n");
         delay(10000); // 10 seconds
         return;
     }

examples/Example2_PeriodicCommunications/Example2_PeriodicCommunications.ino

@@ -168,16 +168,6 @@ void loop()
     notecard.logDebug("performing sensor measurement\n");
     lastStatusMs = millis();
 
-    // Count the simulated measurements that we send to the cloud, and stop the
-    // demo before long.
-    static unsigned eventCounter = 0;
-    if (++eventCounter > 25)
-    {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.");
-        delay(10000); // 10 seconds
-        return;
-    }
-
     // Read the notecard's current temperature and voltage, as simulated sensor
     // measurements
     double temperature = 0;
@@ -206,7 +196,6 @@ void loop()
         {
             JAddNumberToObject(body, "temp", temperature);
             JAddNumberToObject(body, "voltage", voltage);
-            JAddNumberToObject(body, "count", eventCounter);
         }
         notecard.sendRequest(req);
     }

examples/Example5_UsingTemplates/Example5_UsingTemplates.ino

@@ -155,7 +155,7 @@ void loop()
     static unsigned eventCounter = 0;
     if (++eventCounter > 25)
     {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.");
+        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.\n");
         delay(10000); // 10 seconds
         return;
     }

examples/Example6_SensorTutorial/Example6_SensorTutorial.ino

@@ -66,7 +66,7 @@ void loop()
     static unsigned eventCounter = 0;
     if (++eventCounter > 25)
     {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.");
+        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.\n");
         delay(10000); // 10 seconds
         return;
     }

examples/Example7_PowerControl/Example7_PowerControl.ino

@@ -134,7 +134,7 @@ void loop()
     // Bump the number of cycles
     if (++globalState.cycles > 25)
     {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.");
+        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.\n");
         delay(10000); // 10 seconds
         return;
     }