From 22fe2591c7025c38723aa2a030528b82794fd469 Mon Sep 17 00:00:00 2001
From: ot0tot <36753790+ot0tot@users.noreply.github.com>
Date: Wed, 14 May 2025 10:03:32 -0400
Subject: [PATCH 1/2] Create config.h
---
configs/AXISFLYINGECOF4/config.h | 104 +++++++++++++++++++++++++++++++
1 file changed, 104 insertions(+)
create mode 100644 configs/AXISFLYINGECOF4/config.h
diff --git a/configs/AXISFLYINGECOF4/config.h b/configs/AXISFLYINGECOF4/config.h
new file mode 100644
index 000000000..ca4d89bb5
--- /dev/null
+++ b/configs/AXISFLYINGECOF4/config.h
@@ -0,0 +1,104 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see .
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU STM32F405
+#define BOARD_NAME AXISFLYINGECOF4
+#define MANUFACTURER_ID AXFL
+
+#define USE_ACC
+#define USE_ACC_SPI_ICM42688P
+#define USE_GYRO
+#define USE_GYRO_SPI_ICM42688P
+#define USE_BARO
+#define USE_BARO_BMP280
+#define USE_BARO_DPS310
+#define USE_FLASH
+#define USE_FLASH_M25P16
+#define USE_MAX7456
+
+#define BEEPER_PIN PC3
+#define MOTOR1_PIN PC6
+#define MOTOR2_PIN PC7
+#define MOTOR3_PIN PC8
+#define MOTOR4_PIN PC9
+#define SERVO1_PIN PB10
+#define SERVO2_PIN PB11
+#define LED_STRIP_PIN PB6
+#define CAMERA_CONTROL_PIN PB0
+#define UART1_TX_PIN PA9
+#define UART3_TX_PIN PC10
+#define UART4_TX_PIN PA0
+#define UART5_TX_PIN PC12
+#define UART1_RX_PIN PA10
+#define UART2_RX_PIN PA3
+#define UART3_RX_PIN PC11
+#define UART4_RX_PIN PA1
+#define UART5_RX_PIN PD2
+#define I2C1_SCL_PIN PB8
+#define I2C1_SDA_PIN PB9
+#define LED0_PIN PC5
+#define SPI1_SCK_PIN PA5
+#define SPI2_SCK_PIN PB13
+#define SPI3_SCK_PIN PB3
+#define SPI1_SDI_PIN PA6
+#define SPI2_SDI_PIN PB14
+#define SPI3_SDI_PIN PB4
+#define SPI1_SDO_PIN PA7
+#define SPI2_SDO_PIN PB15
+#define SPI3_SDO_PIN PB5
+#define ADC_VBAT_PIN PC1
+#define ADC_CURR_PIN PC2
+#define PINIO1_PIN PC0
+#define FLASH_CS_PIN PB7
+#define MAX7456_SPI_CS_PIN PB12
+#define GYRO_1_EXTI_PIN PC4
+#define GYRO_1_CS_PIN PA4
+
+#define TIMER_PIN_MAPPING \
+ TIMER_PIN_MAP( 0, PC6, 2, 1 ) \
+ TIMER_PIN_MAP( 1, PC7, 2, 1 ) \
+ TIMER_PIN_MAP( 2, PC8, 2, 1 ) \
+ TIMER_PIN_MAP( 3, PC9, 2, 0 ) \
+ TIMER_PIN_MAP( 4, PB10, 1, -1 ) \
+ TIMER_PIN_MAP( 5, PB11, 1, -1 ) \
+ TIMER_PIN_MAP( 6, PB6, 1, 0 ) \
+ TIMER_PIN_MAP( 7, PB0, 2, -1 )
+
+#define ADC_INSTANCE ADC3
+#define ADC3_DMA_OPT 1
+#define MAG_I2C_INSTANCE I2CDEV_1
+#define BARO_I2C_INSTANCE I2CDEV_1
+#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
+#define DEFAULT_DSHOT_BURST DSHOT_DMAR_OFF
+#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_OFF
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define BEEPER_INVERTED
+#define SYSTEM_HSE_MHZ 8
+#define PINIO1_BOX 40
+#define PINIO1_CONFIG 129
+#define BOX_USER1_NAME "VTX PWR"
+#define GYRO_1_SPI_INSTANCE SPI1
+//#define GYRO_1_ALIGN CW180_DEG
+#define MAX7456_SPI_INSTANCE SPI2
+#define FLASH_SPI_INSTANCE SPI3
\ No newline at end of file
From ea4b94e4cc0a9ef33a2782fdb05e649392ee87e2 Mon Sep 17 00:00:00 2001
From: ot0tot <36753790+ot0tot@users.noreply.github.com>
Date: Mon, 19 May 2025 11:00:33 -0400
Subject: [PATCH 2/2] Add EOL
Co-authored-by: Mark Haslinghuis
---
configs/AXISFLYINGECOF4/config.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/AXISFLYINGECOF4/config.h b/configs/AXISFLYINGECOF4/config.h
index ca4d89bb5..f599165e8 100644
--- a/configs/AXISFLYINGECOF4/config.h
+++ b/configs/AXISFLYINGECOF4/config.h
@@ -101,4 +101,4 @@
#define GYRO_1_SPI_INSTANCE SPI1
//#define GYRO_1_ALIGN CW180_DEG
#define MAX7456_SPI_INSTANCE SPI2
-#define FLASH_SPI_INSTANCE SPI3
\ No newline at end of file
+#define FLASH_SPI_INSTANCE SPI3