Update content/software/plc-ide/tutorials/plc-ide-setup-license/content.md

Co-authored-by: Fr4ng <100422525+Fr4ng@users.noreply.github.com>

Author: TaddyHC

content/software/plc-ide/tutorials/plc-ide-setup-license/content.md

@@ -132,7 +132,7 @@ Plug your device to the computer, select your board's Serial Port, and click the
 
 ***The device will show two Serial Ports: the default (generally with the lowest number) is the usual Serial Port. The secondary one (usually with the highest number) is a virtual port for Modbus communication from the device to your computer. Please take note of the port number assigned to the secondary port (virtual port for Modbus), as it will be needed in a second step.***
 
-If the following message appears during the download procedure, double-tap the reset button using the tip of a pen or a similar pointed object. The LED above the reset button will start blinking, indicating that the Opta™ is ready to be flashed with a new firmware. Click the **Download** button to begin the process again.
+If the following message appears during the download procedure, double-tap the reset button using the tip of a pen or a similar pointed object. The LED above the reset button for Opta or the Digital Outputs LEDs for Portenta Machine control will start blinking, indicating that the device is ready to be flashed with a new firmware. Click the **Download** button to begin the process again.
 
 ![Download error message](assets/downloadSketchError.png)