_eD_Remap.ini

;
;;  Remap definitions
;;  for Portable Keyboard Layout by Farkas Máté [https://github.com/Portable-Keyboard-Layout]
;;  edition DreymaR (Øystein B Gadmar, 2015-)   [https://github.com/DreymaR/BigBagKbdTrixPKL]
;;
;;  This file provides remap cycles for compatibility and ergonomic mods.
;;  It usually goes in the ./Files folder and is used by EPKL.exe.
;;  NOTE: Help images are not updated automatically. You have to run the Help Image Generator (which requires Inkscape) for that.
;
;;  Remap notes:
;;  	- There are remap loops/permutations/cycles, and a section of remaps referring to them.
;;  	- There's a VK table using VK## for long names and names for shorter ones. Abbreviations explained in comments. The default table uses ANSI VK_OEM codes.
;;  	- VK/SC entries are case agnostic. EPKL converts them to upper case internally.
;;  	- The KLM map codes are 3 long for special keys and 2 for letters/numbers. For SC, use QW### or Co### as desired. For VK, vc### is a synonym for QW###.
;;  	- The keys to the right of the main block can be left out of a map if unused.
;

[KeyLayoutMap]
;; These key maps are used in cycles below. A key remap cycle will be converted from the chosen map type (specified at the start of the cycle) to SC.
;;  'Enhanced 101/102-key' (type 4 keyboard). VirtualKey, ScanCode and Colemak alias mappings.
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX
;;  ||Esc   |F1    |F2    |F3    |F4    |F5    |F6    |F7    |F8    |F9    |F10   |F11   |F12   ||Back  |Menu  ||PrtSc |ScrLk |Pause ||NumLk |KP /  |KP *  |KP -  ||
VK0 ="ESCAPE|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | F11  | F12  || BACK | APPS || vk2c |SCROLL|PAUSE || vk90 | vk6f | vk6a | vk6d |"
SC0 ="sc001 |sc03b |sc03c |sc03d |sc03e |sc03f |sc040 |sc041 |sc042 |sc043 |sc044 |sc057 |sc058 ||sc00e |sc15d ||sc137 |sc046 |sc045 ||sc145 |sc135 |sc137 |sc04a |"
Co0 =" ESC  | _F1  | _F2  | _F3  | _F4  | _F5  | _F6  | _F7  | _F8  | _F9  | F10  | F11  | F12  || BSP  | APP  || PSC  | SLK  | PAU  || NLK  | PDV  | PMU  | PMN  |"
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX------+------+------+------XX
;;  ||`     |1     |2     |3     |4     |5     |6     |7     |8     |9     |0     |-     |=     ||LShft |RShft ||Ins   |Home  |PgUp  ||KP 7  |KP 8  |KP 9  |KP +  ||
VK1 ="OEM_3 |  1   |  2   |  3   |  4   |  5   |  6   |  7   |  8   |  9   |  0   | vkbd | vkbb ||LSHIFT|RSHIFT||INSERT| HOME |PRIOR || vk67 | vk68 | vk69 | vk6b |"
SC1 ="sc029 |sc002 |sc003 |sc004 |sc005 |sc006 |sc007 |sc008 |sc009 |sc00a |sc00b |sc00c |sc00d ||sc02a |sc136 ||sc152 |sc147 |sc149 ||sc047 |sc048 |sc049 |sc04e |"
Co1 =" _GR  | _1   | _2   | _3   | _4   | _5   | _6   | _7   | _8   | _9   | _0   | _MN  | _PL  || LSH  | RSH  || INS  | HOM  | PGU  || P_7  | P_8  | P_9  | PPL  |"
;;  XX------+------+------+------+------+------+------+------+------+------+------+------+------XX------+------XX------+------+------XX------+------+------+------XX
;Cmk||Tab   |Q     |W     |F     |P     |G     |J     |L     |U     |Y     |;     |[     |]     ||LCtrl |RCtrl ||Del   |End   |PgDn  ||KP 4  |KP 5  |KP 6  |KPEnt ||
VK2 =" TAB  |  Q   |  W   |  E   |  R   |  T   |  Y   |  U   |  I   |  O   |  P   |OEM_4 |OEM_6 || vka2 | vka3 ||DELETE| END  | NEXT || vk64 | vk65 | vk66 | vk6c |"
SC2 ="sc00f |sc010 |sc011 |sc012 |sc013 |sc014 |sc015 |sc016 |sc017 |sc018 |sc019 |sc01a |sc01b ||sc01d |sc11d ||sc153 |sc14f |sc151 ||sc04b |sc04c |sc04d |sc11c |"
Co2 =" TAB  | _Q   | _W   | _F   | _P   | _G   | _J   | _L   | _U   | _Y   | _SC  | _LB  | _RB  || LCT  | RCT  || DEL  | END  | PGD  || P_4  | P_5  | P_6  | PEN  |"
;;  XX------+------+------+------+------+------+------+------+------+------+------+------+------XX------+------XX======+======+======XX------+------+------+------XX
;Cmk||Caps  |A     |R     |S     |T     |D     |H     |N     |E     |I     |O     |'     |\     ||LGUI  |RGUI  ||VolDn |Up    |VolUp ||KP 1  |KP 2  |KP 3  |Mute  ||
VK3 =" vk14 |  A   |  S   |  D   |  F   |  G   |  H   |  J   |  K   |  L   |OEM_1 |OEM_7 |OEM_5 || LWIN | RWIN || vkaf |  UP  | vkae || vk61 | vk62 | vk63 | vkad |"
SC3 ="sc03a |sc01e |sc01f |sc020 |sc021 |sc022 |sc023 |sc024 |sc025 |sc026 |sc027 |sc028 |sc02b ||sc15b |sc15c ||sc130 |sc148 |sc12e ||sc04e |sc04f |sc050 |sc120 |"
Co3 =" CLK  | _A   | _R   | _S   | _T   | _D   | _H   | _N   | _E   | _I   | _O   | _QU  | _BS  || LWI  | RWI  || VLD  | _UP  | VLU  || P_1  | P_2  | P_3  | MUT  |"
;;  XX------+------+------+------+------+------+------+------+------+------+------+------+------XX------+------XX------+------+------XX------+------+------+------XX
;Cmk||LS/GT |Z     |X     |C     |V     |B     |K     |M     |,     |.     |/     |Enter |Space ||LAlt  |RAlt  ||Left  |Down  |Right ||KP 0  |KP .  |Power |Sleep ||
VK4 =" vke2 |  Z   |  X   |  C   |  V   |  B   |  N   |  M   | vkbc | vkbe |OEM_2 |RETURN|SPACE ||LMENU |RMENU || LEFT | DOWN |RIGHT || vk60 | vk6e |POWER |SLEEP |"
SC4 ="sc056 |sc02c |sc02d |sc02e |sc02f |sc030 |sc031 |sc032 |sc033 |sc034 |sc035 |sc01c |sc039 ||sc038 |sc138 ||sc14b |sc150 |sc14d ||sc052 |sc053 |sc15e |sc15f |"
Co4 =" _LG  | _Z   | _X   | _C   | _V   | _B   | _K   | _M   | _CM  | _PD  | _SL  | ENT  | SPC  || LAL  | RAL  || _LE  | _DN  | _RI  || P_0  | PDC  | PWR  | SLP  |"
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX
;;  VK general abbreviations: 14-CAPITAL, 2c-SNAPSHOT, e2-OEM_102, [a2-a3]-#CONTROL, bb-OEM_PLUS, bc-OEM_COMMA, bd-OEM_MINUS, be-OEM_PERIOD, df-OEM_8 (not on ANSI)
;;  VK NumPad  abbreviations: [60-69]-NUMPAD#, 6a-MULTIPLY, 6b-ADD, 6c-SEPARATOR, 6d-SUBTRACT, 6e-DECIMAL, 6f-DIVIDE, 90-NUMLOCK
;;  Other key codes: SC146 = CtrlBrk; SC054 = SysReq; SC163 = Wake. These and Power/Sleep may not work well on all systems.


;;  These are other KeyLayoutMap variants with positional information and full-length maps. You can use them in remap cycles.
;;  * QWERTY labeled Co-like KeyLayoutMap.
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX
QW0 =" ESC  | _F1  | _F2  | _F3  | _F4  | _F5  | _F6  | _F7  | _F8  | _F9  | F10  | F11  | F12  || BSP  | APP  || PSC  | SLK  | PAU  || NLK  | PDV  | PMU  | PMN  |"
QW1 =" _GR  | _1   | _2   | _3   | _4   | _5   | _6   | _7   | _8   | _9   | _0   | _MN  | _PL  || LSH  | RSH  || INS  | HOM  | PGU  || P_7  | P_8  | P_9  | PPL  |"
QW2 =" TAB  | _Q   | _W   | _E   | _R   | _T   | _Y   | _U   | _I   | _O   | _P   | _LB  | _RB  || LCT  | RCT  || DEL  | END  | PGD  || P_4  | P_5  | P_6  | PEN  |"
QW3 =" CLK  | _A   | _S   | _D   | _F   | _G   | _H   | _J   | _K   | _L   | _SC  | _QU  | _BS  || LWI  | RWI  || VLD  | _UP  | VLU  || P_1  | P_2  | P_3  | MUT  |"
QW4 =" _LG  | _Z   | _X   | _C   | _V   | _B   | _N   | _M   | _CM  | _PD  | _SL  | ENT  | SPC  || LAL  | RAL  || _LE  | _DN  | _RI  || P_0  | PDC  | PWR  | SLP  |"
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX
;;
;;  * Colemak labeled TMK-like KeyLayoutMap.
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX
TC0 =" ESC_ | _F1_ | _F2_ | _F3_ | _F4_ | _F5_ | _F6_ | _F7_ | _F8_ | _F9_ | _F10 | _F11 | _F12 || BSPC | APP_ || PSCR | SCLK | PAUS || NLCK | PSLS | PAST | PMNS |"
TC1 =" N0GR | N1_1 | N2_2 | N3_3 | N4_4 | N5_5 | N6_6 | N7_7 | N8_8 | N9_9 | Na_0 | NbMN | NcPL || LSFT | RSFT || INS_ | HOME | PGUP || _P7_ | _P8_ | _P9_ | PPLS |"
TC2 =" TAB_ | U1_Q | U2_W | U3_F | U4_P | U5_G | U6_J | U7_L | U8_U | U9_Y | UaSC | UbLB | UcRB || LCTL | RCTL || DEL_ | END_ | PGDN || _P4_ | _P5_ | _P6_ | PENT |"
TC3 =" CAPS | H1_A | H2_R | H3_S | H4_T | H5_D | H6_H | H7_N | H8_E | H9_I | Ha_O | HbQU | HcBS || LGUI | RGUI || VOLD | _UP_ | VOLU || _P1_ | _P2_ | _P3_ | MUTE |"
TC4 =" L0LG | L1_Z | L2_X | L3_C | L4_V | L5_B | L6_K | L7_M | L8CM | L9PD | LaSL | ENT_ | SPC_ || LALT | RALT || LEFT | DOWN | RGHT || _P0_ | PDEC | PWR_ | SLEP |"
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX
;;
;;  * QWERTY labeled TMK-like KeyLayoutMap.
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX
TQ0 =" ESC_ | _F1_ | _F2_ | _F3_ | _F4_ | _F5_ | _F6_ | _F7_ | _F8_ | _F9_ | _F10 | _F11 | _F12 || BSPC | APP_ || PSCR | SCLK | PAUS || NLCK | PSLS | PAST | PMNS  |"
TQ1 =" N0GR | N1_1 | N2_2 | N3_3 | N4_4 | N5_5 | N6_6 | N7_7 | N8_8 | N9_9 | Na_0 | NbMN | NcPL || LSFT | RSFT || INS_ | HOME | PGUP || _P7_ | _P8_ | _P9_ | PPLS  |"
TQ2 =" TAB_ | U1_Q | U2_W | U3_E | U4_R | U5_T | U6_Y | U7_U | U8_I | U9_O | Ua_P | UbLB | UcRB || LCTL | RCTL || DEL_ | END_ | PGDN || _P4_ | _P5_ | _P6_ | PENT  |"
TQ3 =" CAPS | H1_A | H2_S | H3_D | H4_F | H5_G | H6_H | H7_J | H8_K | H9_L | HaSC | HbQU | HcBS || LGUI | RGUI || VOLD | _UP_ | VOLU || _P1_ | _P2_ | _P3_ | MUTE  |"
TQ4 =" L0LG | L1_Z | L2_X | L3_C | L4_V | L5_B | L6_N | L7_M | L8CM | L9PD | LaSL | ENT_ | SPC_ || LALT | RALT || LEFT | DOWN | RGHT || _P0_ | PDEC | PWR_ | SLEP  |"
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX
;;
;;  * XKB key alias table. The main block is purely positional and therefore layout agnostic.
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX
XK0 =" ESC  | FK01 | FK02 | FK03 | FK04 | FK05 | FK06 | FK07 | FK08 | FK09 | FK10 | FK11 | FK12 || BKSP | MENU || PRSC | SCLK | PAUS || NMLK | KPDV | KPMU | KPSU |"
XK1 =" TLDE | AE01 | AE02 | AE03 | AE04 | AE05 | AE06 | AE07 | AE08 | AE09 | AE10 | AE11 | AE12 || LFSH | RTSH || INS  | HOME | PGUP || KP7  | KP8  | KP9  | KPAD |"
XK2 =" TAB  | AD01 | AD02 | AD03 | AD04 | AD05 | AD06 | AD07 | AD08 | AD09 | AD10 | AD11 | AD12 || LCTL | RCTL || DELE | END  | PGDN || KP4  | KP5  | KP6  | KPEN |"
XK3 =" CAPS | AC01 | AC02 | AC03 | AC04 | AC05 | AC06 | AC07 | AC08 | AC09 | AC10 | AC11 | BKSL || LWIN | RWIN || VOL- | UP   | VOL+ || KP1  | KP2  | KP3  | MUTE |"
XK4 =" LSGT | AB01 | AB02 | AB03 | AB04 | AB05 | AB06 | AB07 | AB08 | AB09 | AB10 | RTRN | SPCE || LALT | RALT || LEFT | DOWN | RGHT || KP0  | KPDL | POWR | I150 |"
;;  XX======+======+======+======+======+======+======+======+======+======+======+======+======XX======+======XX======+======+======XX======+======+======+======XX


[Remaps]
;;  Remap syntax: Each remap is a comma separated (CSV) list of permutation cycles marked with ^.
;;  	- <remap> without ^ includes another map. <remap> + ^<cycle> etc merges cycles/remaps.
;;  	- Note that merged cycles/remaps must all be of the same KeyLayMap type (e.g., "Co").
;;  	- Layout files may use the same syntax as these remaps.
ANS2ISO-Sc      = ^VK_ANSI2ISOSc 									; This remap may not be necessary anymore? 	; eD WIP

AWide_ISO       =  Angle_ISO    ,  Wide_ISO
AWide_ANS       =  Angle_ANS    ,  Wide_ANS
DH-Angle_ISO    =  Cmk-Curl-DH  ,  Angle_ISO
DH-Angle_ANS    =  Cmk-Curl-DH  ,  Angle_ANS
Cmk-CAW_ISO     =  Cmk-Curl-DH  ,  AWide_ISO
Cmk-CAW_ANS     =  Cmk-Curl-DH  ,  AWide_ANS
Cmk-CkAW_ISO    =  Cmk-Curl-DHk ,  AWide_ISO
Cmk-CkAW_ANS    =  Cmk-Curl-DHk ,  AWide_ANS

Angle_ISO       = ^Angle_ISO105
Angle_ANS       = ^Angle_ANSI-Z
Wide_ISO        = ^Wide7_Number , ^Wide__Upper_ , ^Wide__RBHome + ^WidSl_Lower_ 	;Wide_Slash for ISO
Wide_ANS        = ^Wide7_Number , ^Wide__Upper_ , ^Wide__RBHome , ^WidQu_Lower_ 	;Wide_Quote for ANS
Cmk-Curl-DH     = ^CurlDH_L_Std , ^CurlDH_R_DHm 					; The M-on-homerow original DH(m) mod was (re)installed as DH standard in Oct 2020
Cmk-Curl-DHk    = ^CurlDH_L_Std , ^CurlDH_R_DHk 					; The K-on-homerow DHk variant was the DH standard from 2017 to 2020
V-B             = ^Swap_V_B 										; Swap V-B so CurlDH Ext+V follows V by swapping V and D, as Curl-DH puts D on the B key
SL-BS           = ^Swap_SL_BS 										; For Wide-ISO Extend, swap / - \ to get WhLe/WhRi together
Sym_ISO         = ^SymQuMn2_ISO 									; DreymaR's Symbol Rotation mod (SymQu/Mn/QuMn)
Sym1ISO         = ^SymQuMn1_ISO 									; DreymaR's Symbol Rotation mod (ISO 1-loop variant, leaving SL alone to improve MN on non-wide layouts)
Sym_ANS         = ^SymQuMn1_ANS 									; DreymaR's Symbol Rotation mod (ANSI 1-loop variant, probably the better option for ANSI overall)
;Colemaq         = ^Cycl_Q_SC_QU 									; Discord user snth's 'Colemaq' mod. Demo/test.

QWERTY          = ^Tarmak_Rev_E +  Tarmak-1
Y-Z             = ^Swap_Y_Z 										; Swap Y-Z to convert positions between QWERTY and QWERTZ (Germany etc.)
QW-AZ           = ^Swap_QWE_AZE 									; Swap A-Q, W-Z and M-SC(?) to convert roughly between QWERTY and AZERTY (France). 	; eD WIP: Do the M-SC-CM-PD-etc stuff by layout VKey maps?
Tarmak-1        = ^Tarmak_Rev_T +  Tarmak-2
Tarmak-2        = ^Tarmak_Rev_R +  Tarmak-3
Tarmak-3        = ^Tarmak_Rev_O ,  Tarmak-4
Tarmak-4        = ^Tarmak_Rev_I
Tmk-1A_ISO      =  Tarmak-1     ,  Angle_ISO
Tmk-2A_ISO      =  Tarmak-2     ,  Angle_ISO
Tmk-3A_ISO      =  Tarmak-3     ,  Angle_ISO
Tmk-4A_ISO      =  Tarmak-4     ,  Angle_ISO
Tmk-1C_ISO      =  Tarmak-1     , ^CurlDH_R_DHm
Tmk-2C_ISO      =  Tarmak-2     ,  Cmk-Curl-DH
Tmk-3C_ISO      =  Tarmak-3     ,  Cmk-Curl-DH
Tmk-4C_ISO      =  Tarmak-4     ,  Cmk-Curl-DH 						; Using the DH(m) mod, one may actually choose freely when to implement the right-hand side.
Tmk-1CA_ISO     =  Tmk-1C_ISO ,  Angle_ISO 		; A Tm1, Tm1C, (Tm1CA,) Tm2C(A) starting progression is the most careful; maybe overmuch for some.
Tmk-2CA_ISO     =  Tmk-2C_ISO ,  Angle_ISO 		; At Tm2, it's good to get the Angle mod in place
Tmk-3CA_ISO     =  Tmk-3C_ISO ,  Angle_ISO
Tmk-4CA_ISO     =  Tmk-4C_ISO ,  Angle_ISO
Tmk-1A_ANS      =  Tarmak-1     ,  Angle_ANS
Tmk-2A_ANS      =  Tarmak-2     ,  Angle_ANS
Tmk-3A_ANS      =  Tarmak-3     ,  Angle_ANS
Tmk-4A_ANS      =  Tarmak-4     ,  Angle_ANS
Tmk-1C_ANS      =  Tarmak-1     , ^CurlDH_R_DHm
Tmk-2C_ANS      =  Tarmak-2     ,  Cmk-Curl-DH
Tmk-3C_ANS      =  Tarmak-3     ,  Cmk-Curl-DH
Tmk-4C_ANS      =  Tarmak-4     ,  Cmk-Curl-DH
Tmk-1CA_ANS     =  Tmk-1C_ANS ,  Angle_ANS
Tmk-2CA_ANS     =  Tmk-2C_ANS ,  Angle_ANS
Tmk-3CA_ANS     =  Tmk-3C_ANS ,  Angle_ANS
Tmk-4CA_ANS     =  Tmk-4C_ANS ,  Angle_ANS

Dvorak          = ^Dvorak_Loop1 , ^Dvorak_Loop2 + ^Dvorak_Norm3 	; Standard Dvorak
Dvk-AWide_ISO   = ^Dvorak_Loop1 , ^Dvorak_Loop2 + ^Dvk_WideISO3 ,  AWide_ISO
Dvk-AWide_ANS   = ^Dvorak_Loop1 , ^Dvorak_Loop2 + ^Dvk_WideANS3 ,  AWide_ANS
Dvk-CAW_ISO     = ^Dvk_Curl-ID  ,  Dvk-AWide_ISO
Dvk-CAW_ANS     = ^Dvk_Curl-ID  ,  Dvk-AWide_ANS

[RemapCycles]
;;  Cycles are pipe delimited like a KeyLayoutMap.
;;  The first entry determines map type (Co etc) and >(L-R)/<(R-L) order.
;;  eD TODO: Order isn't implemented yet! Is it necessary? I've just reversed some cycles manually for now.
CurlDH_L_Std = Co>  | _D  | _V  | _B  | _G  |
CurlDH_R_DHk = Co>  | _H  | _M  | _K  | 							; The 2017 standard DHk mod, good on row-staggered boards
CurlDH_R_DHm = Co>  | _H  | _M  | 									; SteveP99's 2014 DH mod, good on matrix boards, now standard
SymQu        = Co>  | _QU | _SC | 									; DreymaR's ' → ; symbol key rotation for a better quote pos.
SymMn_ISO    = Co>              | _SL | _BS | _PL | _MN | 			; DreymaR's - → / → \ → = symbol key rotation for the hyphen
SymMn_ANS    = Co>              | _SL       | _PL | _MN | 			; DreymaR's - → /     → = symbol key rotation for the hyphen
SymQuMn1_ISO = Co>  | _QU | _SC |       _BS | _PL | _MN | 			; DreymaR's symbol key rotations ( ISO:  ' → ; → \ → = → - )
SymQuMn2_ISO = Co>  | _QU | _SC / _SL | _BS | _PL | _MN | 			; DreymaR's symbol key rotations ( ' → ; and / → \ → = → - )
SymQuMn1_ANS = Co>  | _QU | _SC | _SL       | _PL | _MN | 			; DreymaR's symbol key rotations ( ANSI: ' → ; → / → = → - )
Swap_V_B     = Co>  | _V  | _B  | 									; Swap V and B (for Curl-DH Extend)
Swap_SL_BS   = Co>  | _SL | _BS | 									; Swap / and \ (for Wide-ISO Extend)
Angle_ISO105 = Co>  | _B  | _V  | _C  | _X  | _Z  | _LG |
Angle_ANSI-Z = Co>  | _B  | _V  | _C  | _X  | _Z  |

Swap_Y_Z     = Co>  | _Y  | _Z  | 									; Swap Y-Z to convert positions between QWERTY and QWERTZ (Germany etc.)
Swap_QWE_AZE = Co>  | _A  | _Q  / _W  | _Z  / _M  | _SC | 			; Swap A-Q, W-Z and M-SC to convert roughly between QWERTY and AZERTY (France)
;Cycl_Q_SC_QU = Co>  | _Q  | _SC | _QU | 							; Discord user snth's Q > ; > ' rotation a.k.a 'Colemaq'

;Wide6_Number = TC>  | N6_6 | N7_7 | N8_8 | N9_9 | Na_0 | NbMN | NcPL |
;Wide7_Number = TC>         | N7_7 | N8_8 | N9_9 | Na_0 | NbMN | NcPL |
Wide6_Number = Co>  | _6   | _7   | _8   | _9   | _0   | _MN  | _PL  |
Wide7_Number = Co>         | _7   | _8   | _9   | _0   | _MN  | _PL  |
Wide__Upper_ = TC>         | U6_J | U7_L | U8_U | U9_Y | UaSC | UbLB |
Wide__RBHome = TC>  | UcRB | H6_H | H7_N | H8_E | H9_I | Ha_O | HbQU |
WidSl_Lower_ = TC>  | HcBS | L6_K | L7_M | L8CM | L9PD | LaSL |
WidQu_Lower_ = TC>         | L6_K | L7_M | L8CM | L9PD | LaSL |

;;  Since my layouts are Colemak-centric, the Tarmak_Rev progression is backwards from Cmk[eD] to QWERTY like in my XKB files.
;;  The five Tarmak loop elements are: L>U>I   J>Y>O>;>P > R>S>D > G>T>F > E>K>N
Tarmak_Rev_E = Co>  | _N  | _K  | _E  |
Tarmak_Rev_T = Co>  | _F  | _T  | _G  |
Tarmak_Rev_R = Co>  | _D  | _S  | _R  |
Tarmak_Rev_O = Co>  | _P  | _SC | _O  | _Y  | _J  |
Tarmak_Rev_I = Co>  | _I  | _U  | _L  |
;Tarmak_LoopE = QW>  | _E  | _K  | _N  | _J  |
;Tarmak_LoopT = QW>  | _G  | _T  | _F  |
;Tarmak_LoopR = QW>  | _R  | _S  | _D  |
;Tarmak_LoopO = QW>  | _Y  | _O  | _SC | _P  |
;Tarmak_LoopI = QW>  | _L  | _U  | _I  |

;;  The Dvorak layout will also be implemented here as a remap from Colemak. Users shouldn't notice.
;;  Heatmap from Ioboru: G 13.1 / F 12.1 / D 11.4 / RSh 11.0 / P 10.7 / B 9.9 / LSh 9.1 / , 8.3 / . 6.6
;;  TODO: Split loop 2! Make SL/MN/LB and RB/PL on a short loop where they may be rearranged to get LB/RB in the middle for Wide. 
;;        We need Z and SL in the lower/upper middle and MN in the RBr position?
;Dvorak_Swaps = QW>  | _RB | _PL / _W  | _CM | 						; Ioboru's loops from QWERTY (2/2/14/15 keys)
;Dvorak_Loop1 = QW>  | _E  | _D  | _H  | _J  | _C  | _I  | _G  | _U  | _F  | _Y  | _T  | _K  | _V  | _PD |
;Dvorak_Loop2 = QW>  | _Q  | _X  | _B  | _N  | _L  | _P  | _R  | _O  | _S  | _SC | _Z  | _SL | _LB | _MN | _QU |
Dvorak_Loop1 = Co>  | _I  | _D  | _H  | _N  / _W  | _CM | 				; Going from Colemak, there's a 4-loop and 2 swaps
Dvorak_Loop2 = Co>  | _Q  | _X  | _B  | _K  | _V  | _PD | _F  | _J  | _C  | _U  | _T  | _E  | _S  | _O  | _R  | _Y  | _G  | _L  | _SC | _Z  |
Dvorak_Norm3 = Co>  | _SL | _LB | _MN | _QU / _RB | _PL | 				; The rest of the big loop and a swap, for normal Dvorak
Dvk_WideISO3 = Co>  | _BS | _PL | _MN | _QU | 							; For Wide(ISO)  Dvorak, using the Wide_Slash remap
Dvk_WideANS3 = Co>  | _SL | _PL | _MN | _QU | 							; For Wide(ANSI) Dvorak, using the Wide_Quote remap
Dvk_Curl-ID  = Co>  | _I  | _U  | _K  | _X  / _D  | _M  | _B  | _F  | 	; DreymaR's Dvorak Curl mod, bettering IU and DF positions

;;  VirtualKey remaps follow the same general syntax as others, but are applied to VK entries. Complex, since different ISO locales use different codes!
;;  - KLM    vc_## VKs: |    SC |    GR |    BS |    SL |    MN |    PL |    LB |    RB |    LG |    QU | bd=MN, bb=PL, bc=CM, be=PD  |
;;  - ANSI   OEM_# VKs: | ;:  1 | `~  3 | \|  5 | /?  2 | -_  - | =+  + | [{  4 | ]}  6 | vke2  | '"  7 | vkbd  MINUS  | vkbb  PLUS   | vkdf  OEM_8  |
;;  - ISO-Sc OEM_# VKs: | ;:  3 | `~  5 | \|  2 | /?  - | -_  + | =+  4 | [{  6 | ]}  1 | _ 102 | '"  7 | vkbc  COMMA  | vkbe  PERIOD | (UK non-ANS) |
VK_ANSI2ISOSc   = VK>   | OEM_1 | OEM_3 | OEM_5 | OEM_2 | vkbd  | vkbb  | OEM_4 | OEM_6 | 	; This remap cycle may not be necessary anymore?
;VK_ISOSc2ANSI   = VK>   | OEM_6 | OEM_4 | vkbb  | vkbd  | OEM_2 | OEM_5 | OEM_3 | OEM_1 | 	; This remap cycle isn't in use

;;  ****************************************************************
;;  ****  VK_OEM key code table (Key and SC for ANSI)           ****
;;  ****************************************************************
;;  KLM     : SC  PL  CM  MN  PD  SL  GR    LB  BS  RB  QU  ??  LG
;;  Key     : :;  +=  <,  _-  >.  ?/  ~`    {[  |\  }]  "'  §|  ><
;;  VK OEM_ : _1  PL  CM  MN  PD  _2  _3    _4  _5  _6  _7  _8  _102
;;  VK hex  : BA  BB  BC  BD  BE  BF  C0    DB  DC  DD  DE  DF  E2
;;  SC ANS  : 27  0D  33  0C  34  35  29    1A  2B  1B  28  --  56
;;  ****************************************************************
;;  ****  OEM key codes vs some locales; ISO variations         ****
;;  ****************************************************************
;;  KLM OEM : GR MN PL  LB RB BS  SC QU LG  CM PD SL
;;  SC code : 29 0C 0D  1A 1B 2B  27 28 56  33 34 35
;;  VK code : C0 BD BB  DB DD DC  BA DE E2  BC BE BF
;;  KLM ANS : _3/MN/PL  _4/_6/_5  _1/_7/LG  CM/PD/_2 	; KLM ANS default, used by some locales (US,Al,Vi,Br,...?)
;;  KLM ISO : _5/PL/_4  _6/_1/_2  _3/_7/LG  CM/PD/MN 	; KLM ISO-Sc, for Scandinavian locales (Dk,No,Fi,Se)
;;  UK      : _8/MN/PL  _4/_6/_7  _1/_3/_5  CM/PD/_2 	; UK, UK "Extended"
;;  De/Es++ : _5/_4/_6  _1/PL/_2  _3/_7/LG  CM/PD/MN 	; A/Z swap for De QWERTZ. Otherwise as Es. Pt swaps _1/PL.
;;  Fr/Be   : _7/_4/PL  _6/_1/_5  CM/_3/LG  PD/_2/_8 	; A/Q W/Z M/CM/... swaps. Be has PL->MN _8->PL.
;;  Ca      : _7/MN/PL  _4/_6/_5  _1/_3/LG  CM/PD/_2 	; Canadian "French" and "Multilingual"
;;  Cz/Pl++ : _3/PL/_2  _4/_6/_5  _1/_7/LG  CM/PD/MN 	; Cz, Pl "(214)", Slovenian (swaps _2/PL). Cz "QWERTY" has ANS.
;;  Tk      : _3/_8/MN  _4/_6/CM  _1/_7/LG  _2/_5/PD 	; Turkish "Q"
;;  ****************************************************************