Skip to content

Latest commit

 

History

History
48 lines (33 loc) · 1.76 KB

readme.md

File metadata and controls

48 lines (33 loc) · 1.76 KB
parent title has_toc has_children nav_order family function
Example Applications
Power Save Mode
false
false
1
SAME54
Power Save Mode

Serial Bridge

This example compiles the Power Save Mode application which is used to demonstrate WINC's low power mode.

Description

In this demonstration, the WINC’s power save feature is demonstrated. The Power save mode is demonstrated depending on the value configured in example_conf.h - WDRV_WINC_PS_MODE_OFF, WDRV_WINC_PS_MODE_AUTO_LOW_POWER and WDRV_WINC_PS_MODE_MANUAL.

Downloading and building the application

To download or clone this application from Github, go to the top level of the repository

Path of the application within the repository is apps/power_save_mode_example/firmware .

To build the application, refer to the following table and open the project using its IDE.

Project Name Description
sam_d21_xpro_winc1500.X MPLABX project for SAMD21 and WINC3400 Xplained pro
sam_d21_xpro_winc3400.X MPLABX project for SAMD21 and WINC3400 Xplained pro
sam_e54_xpro_winc1500.X MPLABX project for SAME54 and WINC3400 Xplained pro
sam_e54_xpro_winc3400.X MPLABX project for SAME54 and WINC3400 Xplained pro

Setting up SAMEXXX Xplained Pro board

  • Connect the Debug USB port on the SAMXXX Xplained Pro board to the computer using a micro USB cable

Running the Application

  1. Open the project.
  2. Build and program the generated code into the hardware using its IDE.
  3. Refer "firmware update guide" for information.
  4. Please note this example will not output any console messages.